Notification Center and Control Center is gone with 7.0.6

I've noticed that since 7.0.6 iOS update my Notification Center and Control Center sometimes stopped working. I have to turn off and turn on my iPhone to get it back. Is it happening to anyone else?
I tried to slide my finger from up to bottom and nothing happens, neither from bottom to up, nor on the lock screen.

FYI this video solves the problem
http://www.youtube.com/watch?v=K0zCueYlaTA
The problem is when you use assistive touch triple home to disable itself.
Thanks forum!

Similar Messages

HT5858 My notification center and control center are stuck

My notification center and control center are stuck grey and black even if i change the wallpaper. I restarted my iPod but its still stuck how do i fix this!!

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why did the Notification Center and Control Center stop working?

After updating ios 8, Notification and Control Centers stop working from time to time. I can't swipe up or down. I have to use the Assistive Touch to bring them on screen. Restarting the iPhone make them usable again. But afyet a while, it happened again.
Now, iOS 8.1.2. Last update, the Centers used to appear again. But 8.1.2, they just stopped working.
How how can I fix it?

Hello Eric Grylls,
Thanks for contributing to the Apple Support Communities.
If you're not able to access Notification Center or Control Center (other than using Assistive Touch) on your iPhone 5s since the latest update, I recommend following these troubleshooting steps mentioned in this article:
iOS: Not responding or does not turn on - Apple Support
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
All the best,
Jeremy

Swipe for Notification Center and Control Center not working after using Window Zoom

I'm using iOS 8.0.2 on an iPhone 6 and have noticed that after using the Window Zoom (Accessibility feature 3-finger double-tap), I cannot swipe down for Notification Center nor swipe up for Control Center when unlocked (i.e. in Home screen or within an app screen). However, when the iPhone is locked, the swipe down for Notification Center and swipe up for Control Center is okay. It just doesn't work when unlocked. And the only way to rectify the problem is to reboot the phone.
Has anyone else experienced this?

I have figured out the solution to all of our problems!!! We can keep the zoom function ON!!!! Yay!
Step one. Turn back on the beloved zoom function.
step two. Tap screen with 3 fingers.
step three. Select window zoom. (If already selected move on to step Quatro)
step qautro. Select Resize lens.
and for the moment you've all be waiting for... Drum roll..
the grand finale step. IS...
shrink the window to the smallest size.
AFter you have done these 5 steps, you can thoroughly enjoy having all three functions at once. If you switch back to Full Screen Zoom (if that be your preference) the notification and control centers will remain functional! Bon apetit!
i have been successful enlarging the window while keeping the centers functioning by making sure the window is in the shape of a square.
-ChrisCasti

After updating to iOS 8 notification and control center won't open when unlocked

Ever since I updated my iPhone 5s to iOS 8, the notification and control center will not open while my phone is unlocked. I checked to see if I had it disabled in settings and it turns out I did not. I switched the Access Within Apps as well as the Access While Locked on and off anyway but still nothing. I can only pull the notification and control center open while my phone is locked... it is extremely annoying. I know I'm not the only one though because my friend who updated to iOS 8 on his 5c was having the exact same problems. Some help would be much appreciated. Thank you!

So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

Swipe down/up for notification and controle center stop working

Hi guys,
I got today my new IPhone 6+ running iOS 8.0.2 and after a while the swipe up gesture for the control center and also the swipe down gesture for the notification center stops working on the home screen and in apps.
On the lockscreen the gestures still working.
It happend now 3 Times today but I can´t see any System behind this.
And it happens also that the System freezes some times for a few seconds, I saw it happen In safari and mail app.
Hope these are only bugs in iOS which will be solved soon.

Hello Eric Grylls,
Thanks for contributing to the Apple Support Communities.
If you're not able to access Notification Center or Control Center (other than using Assistive Touch) on your iPhone 5s since the latest update, I recommend following these troubleshooting steps mentioned in this article:
iOS: Not responding or does not turn on - Apple Support
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
All the best,
Jeremy

Finance and Controlling report in combination with Cost center, GL account, Internal Order

Hi Members,
Finance and Controlling report in combination with Cost center, GL account, Internal Order.
Please provide any slandered report in all 3 dimension.
Thanks
Dileep Kumar

Search this query in FI Controlling forum am sure you will get useful results there.
This kind of reports related to Controlling are usually created using Report Writer tool.
In fact majority of reports in Controlling component is created using Report Writer only.

My apps and Control Center calculator have disappeared on my iPhone 5s!!

I just bought this phone in December and was having a lot of fun learning how to use it.
All of my apps have been working fine, but suddenly this week a bunch of them are just gone... and so is the calculator in my Control Center!
It is an iPhone 5s. Operating System iOS 7.0.4. Sprint.
I have not used anything called 'jailbreak.' It is a brand new phone, not a restored one.
I have researching solutions on forums and youtube and I have tried the following suggestions:
- Swipe my screen right --> Use the search bar to find my apps.
- swiping between different screens and folders where they may have been displaced
- Settings --> General --> Reset --> Reset Home Screen Layout
- Settings --> General --> Reset --> Reset All Settings
- Delete all of my apps. Plug the phone into my laptop. iTunes --> App Store --> redownload them from iTunes. (my laptop app store did not show iphone apps, just laptop apps)
All of these suggestions had no success. The Reset All Settings was a killer. I backed up everything I thought I needed on iCloud but missed some things. So now after all those trials, I lost a bunch of my info, my wifi and settings are reset, and I am still missing my apps and Control Center calculator
PLEASE SOMEBODY HELP ME!
I am not very technologically advanced, so if there are any new suggestions you can offer, I would greatly appreciate it!
And please explain them in layman's terms thanks

Is that the only option?
Why would I have suggesed it if there were a simpler option that you didn't aready try without success?
I'm afraid I will lose even more information.
Did you read the support article I linked for you - specifically the part about backing up and restoring the backup?

I am having problem with my notifications bar and control centre bar. It doesn't work with sliding my fingers on the screen and when I restart the phone it works properly but again after few days the problem persist? My phone is an iphone6 8.1.3

notification bar and control centre not working by sliding on the screen and when u restart it works fine for 4-5 days then again the problem persists

First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If this does not help, set it up as new device, explained here:
How to erase your iOS device and then set it up as a new device or restore it from backups
If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support

Functionality of Profit Center and Cost Center

Hi,
I am unable to understand the functionality of Profit center and cost center, I know that cost center represents area within an organization for which you will like to see the expenses for a particular time period. for example in an organisation we have three cos centers Accounts, HR and Admin. whenever you post an accounting document in FI you will specify the cost center to which the expense relates. but in some cases when you post an expense and give the relative cost center the profit center is also driven by the system. why is this behavior? i mean i have posted an expense not an income then why is system driving the profit center as well?
Profit centers are used if you want to see the profit of different area of your organisation. in what kind of postings we use profit center? and if we could use profit center to draw income and loss for a specific area why do we need segment reporting? and what is the difference between Segment and Business area. what i understood from their definition is that they are both same and use for same purpose.
I am totally lost in these concepts. please some one help me out with an example. i am stuck at this point. some one please clarify my concept of Profit Center, Cost Center, Segments and business area please.

Hi,
Cost center & Profit Center are organizational units within the enterprise structure , created for better internal control.
As the name suggests Cost Center is the lowest level of the organizational unit representing a defined location of cost incurrence or otherwise to which you can meaningfully assign the cost(both direct & Indirect).
Profit Center is an organizational unit in accounting ,where management would require to see the profitability & fix the responsibility. It may be each plant/division of the company .
If you consider the Plant is the Profit center, you can take the various deptts in the Plant as cost centers. you can draw a balance sheet & profit & loss account statement at profit center level but this will be for your internal use.From this you can know the ROI on particular area. Profit centers are assigned inside the cost center so when you update cost center, profit centers are updated automatically.
Where as Segments are used for legal reporting of your accounting standard as per IFRS. Both Business Area & Segments are more or less same with some technical difference.
Business area is a free organizational unit. It can be derived through cost center or can be entered manually.
But segment is a dependent organizational unit. It is defined & attached inside the profit center master data. It can’t be entered manually.
SAP suggest to use the Segment concept.
Thanks & regards
Deepak

Profit center and profit center group wise profit and loss account

Hi
My name is swetha i have one doubt in ecc 6 version. i need profit & loss account profit center and profit center group wise is it available in sap ecc 6 . Could u please details such kind of informatiion how we will get the p&l report in sap profit center group and profit center with transaction code.
Regards
Swetha

Hi
Please use report
S_ALR_87009712 - Profit Center List: Plan/Actual
Here you can enter the Profit Center Group for which you need the P&L .
Also create a account group which should include all your PL accounts and use the same in the selection of the report.
There are other reports you can try on the same concept.
S_ALR_87009712 - Profit Center List: Plan/Actual
S_ALR_87009726 - Profit Center Group: Plan/Actual/Variance by Origin
S_ALR_87009734 - Profit Center Group: Plan/Plan/Variance
S_ALR_87009717 - Profit Center Group: Quarterly Comparison of Actual Data
Thanks

Cost Center, Work Center and Profit Center

Hi ALL,
Can any one please explain me the concept of Cost Center, Work Center and Profit Center.
And where and when do I assign the cost center???
Amit

Hi Check the following "
Cost centers represent areas of responsibility where costs are incurred or where responsibility for costs may be assigned. They represent the smallest unit of responsibility within the organizational structure of an enterprise.
A cost center can be pictured as a cost bucket such as a department, product line, production stage or geographical area.
An unlimited number of cost centers may be created.
All cost centers within on controlling area have to be assigned to a cost center hierarchy (standard hierarchy).
Costs originally posted to one cost center may be distributed and assessed to one or more other cost centers using allocations.
How are costs assigned/posted to a cost center?
External financial accounting documents created in FI, AM or MM that post to a G/L expense account can be configured to require a cost center assignment be entered at the time of transaction entry. The system automatically creates a parallel CO document that posts to the indicated cost center.
Cost elements master records can be configured to be posted to a certain cost center (automatic account assignment).
In addition, other non-financial activity (i.e., direct labor hours) may be posted directly to cost centers from within CO or via other modules such as PP or HR
chandra

Cost center and cost center group

hi,
how can i create cost center and cost center group?

hi,
after u enter in to sap easy access
goto Extras menu-settings->select display technical names
you can see the T.codes for each transaction
for example:create cost center
accounting>controling->cost center>master data>cost center>individual processing-->KS01-create

BAPI To Update Profit Center And Profit center group

HI All,
We have requirement scenario in which MDM Will Syndicate the PC and PCG And We have to update the PC and PCG in R3.
Do we have a Standard BAPI For Profit center and Profit Center Group Update?
Thanks In Advance!!!!!
Moderator message : Search for available information, duplicate post locked. Continue with original thread.
Edited by: Vinod Kumar on Oct 17, 2011 1:59 PM

Hi
Try This BAPI...
BAPI_PROFITCENTER_CHANGE
Regards
Ajit

Transporting Master data - New GLs,Cost Center and profit Center.

Dear Friends,
1. I have to create new GLs in Dev, Now i have to transport the new GL to Quality and Production. As per my knowledge, Master data has to created in DEV,Quality and Production.
please suggest, is there any t.code where i can transport GL from Dev to quality and production.
2. when Creation of the site, New Cost center,Profit center, Changes to standard hierarchy both in cost center and profit center hierarchy has to done in dev,quality and production manually.
Any suggestions where i can do only in dev and transport to quality and production.
3. After creating new cost center and profit center, i have to go to okb9, select the co.code,cost element and insert the new cost center and profit center in every cost element. This takes almost one hour.
Please suggest how to reduce this manually process.
All the help will be greatly appreciated.
Regards
Sridhar Reddy

Hi ,
Master data is to be created in diffrent clients as it is a non transportable object .
So in case of GL , cost centers you will have to again re run the LSMW which you had created for DEV .
Secondly OKB9 is a transportable object , so i dont feel there should be an issue in adding it to a transportable object .
In case of adding the values of tables in a request what you can do is create a request , go to SE01 open the request in change mode in the objects enter TABU and enter on the relevant entries that you want to transport .
But again one has to be very clear on what all table entries are to be transported , like SKA1 , SKB1 , SKAT etc. looking at the complexities and moving ahead with the standard way it is advisable to re run the LSMW in QUA and PRD .
Hope this helps .
Regards ,
Dewang T.

Notification Center and Control Center is gone with 7.0.6

Similar Messages

Maybe you are looking for