Notification center crashes - the possible fix for me - remove Twitter.

I recently updated to a new Mac, and the only issue I was having intially was Notification Center hanging and crashing the computer when I slid it over.  
I don't know if others were having this problem, or just me; most of the threads I had seen about the issue were dealing with older versions of OS X (Mountain Lion or Lion)  When this hang occurred, the only way around it I had was to hard-reboot the computer, or use the "KillNotificationCenter.app" I downloaded from an older post in this forum.  The computer basically became entirely unresponsive, and often the Notification Center was half slid out when this happened.
It appeared at first to be more frequently an issue if I started the Notification Center right after waking up, but that ended up not being the case.
After experimenting a bit, I think I've figured out the problem (for me, at least), after playing around with things a bit.  I have not had a single Notification Center crash.  There may be something else at play, so I can't confirm this, but for me, all the Notification Center crashes stopped after I removed Twitter from the Notification Center.   This is the default, built in Twitter from OS X, not any Twitter applications.  I have not tried any of those.   It was not incredibly useful for me, since it only returned a minimal amount of information, and I don't in general receive a lot of DMs or mentions, etc.  
I believe what originally drove me to try this was something I saw in the crash logs, but I can't find my notes.  But I can say I haven't had any problems since doing this. 
Again, maybe I'm the only one, but I thought I'd pass this along in case anyone else was still having problems with Notification Center crashing. 

If you literally "checked" them, meaning the checkboxes, that only affects their visibility. To remove them, select one and then click on the "minus" part of the "plus minus" at lower left.
Doug

Similar Messages

  • Is there a way to keep the notification center on the side bar for Yoshimite

    I have a duo screen and it will be really convenient if the notification center is always there on the side for one of my screen. However, every time I click on something else, it disappears. Is there a way to permanently keep my notification on the side?

    You can poke around yourself,  but right off I do not see how this is possible in customizing the plist.
    Finder>Go>Go to folder>
    /System/Library/CoreServices/Notification Center.app
    You can right click to open> Show Package Content.

  • I pulled down the notification center, tapped the "tap to tweet" and my phone was jammed. It stayed that way for a minute then restart itself. Is there any way to fix it or at least give me an explanation

    I pulled down the notification center, tapped the "tap to tweet" and my phone was jammed. It stayed that way for a minute then restart itself. Is there any way to fix it or at least give me an explanation

    Hi Abbie. You have every reason to be upset. These issues normally happen in our country. You can send them an email regarding your concern here:
    http://www.apple.com/feedback/macbook.html
    Regarding your battery, you can probably reset the SMC and see if that improves your battery life. Here are the steps.
    http://support.apple.com/kb/ht3964

  • Possible fix for errors 11503 and 50

    Here's a possible fix for Error 11503 and for error 50.
    It worked for me and hopefully it will work for you.
    I believe this error is caused by the incomplete downloading of either an update to an app. In my case it was caused by closing the lid on my laptop when I was downloading app updates on a very slow internet connection in a hotel.
    Anyway, here is what I did that fixed it completely.
    Close iTunes.
    Go to this folder : /iTunes/Mobile Applications/Downloads
    You'll find tmp files there. Drag them out of this folder to a temporary folder on your desktop. The Downloads folder should now be empty.
    Restart iTunes.
    All should be fine.
    If it is, delete the desktop folder with all the temp files.
    If it's not, then I can't help further, but that's what worked for me.

    Several possible causes from the info you gave
    Battery level low - recharge it for at least 4 hours till the full charge sign displays (2 prong icon instead of lightning icon).
    Time to Reset the iPod - Press the Menu and center Button for about 10 secs till the Apple logo comes ON, then let go of the buttons.
    your hardisk is starting to give problems, hence the skipping and some song refuse to play. - Do a disk diagnostic - follow this post by tt2.
         https://discussions.apple.com/message/17028567#17028567
    If you have updated any sofware application in Windows, then follow this Apple support procedure
    http://support.apple.com/kb/TS1539
    Most likely you have to do all, as the iPod hardisk filesystem would have been corrupted, or else the iPod Reset would bring it to normal operation.
    Good Luck!

  • Possible Fix for Printing Problems in Leopard

    I got this information from Mac OS X Leopard Edition book by David Pogue. Here's his possible fix for printing problems in Leopard...Open web browser and enter this address http://127.0.0.1:631. You'll find youself at a secret "front end" for CUPS (Common UNIX Printer System), the underlying printing technology for Mac OS X 10.5. This trick lets your Mac communicate with a huge array of older printers that dopn't yet have Mac OS X drivers. Using this administration screen, you can print a test page, stop your printer in its tracks, manage your networked printers and print jobs, and more–a very slick trick. Haven't tried it yet...anyone who does let me know how it worked!

    If you literally "checked" them, meaning the checkboxes, that only affects their visibility. To remove them, select one and then click on the "minus" part of the "plus minus" at lower left.
    Doug

  • Possible fix for OS X 10.5.7,  losing connection after sleep, restart

    Possible fix for OS X 10.5.7, Airport, losing connection after sleep, restart, or cold reboot.
    Issue: (For OS X 10.5.7 on iMac5,1, Intel Core 2 Duo)
    =============================================
    - After sleep, restart, cold reboot, even though cannot connect to Internet, but the AirPort bars are still full, as if connected.
    - Losing Internet connection after sleep, restart, cold reboot.
    Possible Fix:
    1.Open Network Preference, click on the Location drop down list > Edit Location... > click on the wheel button > Duplicate Location.
    a)Select this newly setup location; Use Diagnostic button to connect to the internet. Select Network or enter WEP password if necessary.
    b)Test to make sure you can connect to a web page.
    c)Go to sleep & wake up.
    d)This time, the Airport bar will start to show correctly. Before, it will always be full even when not connected. Now there will be no bars or grey out when not connected.
    2.On the left hand side of the Network Preference Window, there is a list of services, such as Airport, build-in ethernet, built-in FireWire, bluetooth, etc.
    a)Click on the wheel button on the bottom of the service list; select Set Service Order...; move Airport to the top of the list.
    b)Delete any services which you are sure that you are not going to use, such as Bluetooth, etc.
    3.Pick one of the locations mentioned in #1, and make it sure it is connected. If not, use Diagnostic button. If you have to select Network or enter WEP password to connect, make it so.
    a)Check to make sure you can connect to a web page.
    4.Go to sleep & wake up. The Airport bar should be filled up quickly. Try to connect to a web page.
    5.Restart computer. Test a web page.
    6.Shut down & Start computer. Test a web page.
    7.When everything is working fine, you can delete the extra location that you created in step #1.
    8.Click the lock on the left lower corner of the Network Preference window to safeguard the setting.

    If my assessment is correct, the LIDE 200 driver is version 14.8.1 and dated 26-Sep-2008. It is possible that the driver will not work with the latest version of OSX. I would advise that you contact Canon and ask them the question.
    (Removed link because of the way Flash drives the Canon site).
    It is not uncommon (though irritating) that devices no longer work when an OS is upgraded. One has to ask the question if (or why) the driver was not written in such a way as to be OS version independent.
    Chris
    I spoke to Canon over here in Australia. Not helpful at all. In fact they were about as useful as an ashtray on on motorcycle. Having said that the tech seemed to think that there would be an update soon. But that is assuming that Canon are aware that there is a problem with that Scanner under OS X 10.5.7.
    Message was edited by: 2point5

  • Notification Center on the Lock Screen as in the Home Screen?(iOS5)

    Do you see the same Notification Center on the Lock Screen as in the Home Screen?
    Anyone? Are you able to see the same stuff in both parts? Like weather, is it in the LockScreen on any iPhone out there?
    Thanks for answering !

    No. Not working for me either.
    Many people have the same problem.

  • IOS7: Is there any way to turn off previews of texts in the lock screen but allow previews in the notification center when the phone is unlocked?

    In iOS6 text message previews would be shown in the notification center when the phone was unlocked and would just show up as "text message" or "imessage" in the lock screen...is there a way to change it so it's the same in iOS7? currently with "no preview" picked, whenever I swipe down in my notification center it just shows text messages with the contact name and not the message itself like it used to.

    I've set up another user on my home Mac and left that one logged in. Now when I connect from work it asks me if I want to share the screen or log on virtually as my user. I think choosing the second option doesn't power up the screen.
    Matt

  • What are the possible values for the JOB status?

    What are the possible values for the JOB status in the table TBTCP and significance for each?

    Hi,
    Have a look at include LBTCHDEF.
    The standard include from SAP.
    -> Definitions and Constants for Function group BTCH
    Kind Regards
    Raymond

  • How can I define the possible entries for "invoicing process" at fkkinv_ma?

    At the transaction code fkkinv_ma, I fill in the fields "Date ID" and "Identification" but I have a problem with the field of "Invoicing Process". When I psh theF4 button, there comes no search help. What should I do? Should I define the possible entries first? If I should, how can I define the possible entries for "invoicing process"? How is the customization done?
    Thanks in advance for the answers.

    You have to define them in the IMG 
    Financial Accounting (new)
    Contract Account Recievable and Payable
    Business Transactions
    Invoicing
    Invoice Types
    You have to set up a number range, decide what type of Financial transactions should not be invoiced -- like  Dunning Charges
    then you have to have a developer create the form and form class of invoice.

  • Plz provide the permanent fix for this issue

    Hi Gurus,
    We are getting Issue in smq2 of target system ecc.
    "Object was locked by user jobschedular" so when we Resetting the Queue from smq2 entries are moving from that Queue but this is happening very frequently can any body tell me the permanenent fix for this ,how to fix this .As a pi consultant how can we fix this from our side or we need to contact Basis people for this.
    As we are in Prduction support .
    Reply plz.
    Regards
    Madhu

    Hi Vila-Thanks for your reply im  getting the issue is here is Object is Locked by the user in
    smq2 of ecc system when we are resetting the queue the entries are getting clearing from the
    queue so instead of doing manually is there q way to do automated process for this thats what i want
    the issue is not in PI side.
    I just want to bring some points to ur notice is
    Message is successfully reached to target system in Target system the entries got stuck in smq2 with the queue name XBTR(Target people side people sayijng that queue name starts with X It belongs ot pi ) so the target people simply assigning that there is a problem on pi side but there is no problem on PI SIDE .
    we are unable to find the issue on target side.
    Quick reply plz
    Regards
    Madhu

  • Add Notification Worklist to the Home page for a responsibility

    Hello All,
    How do you add Notification Worklist to the Home page for a responsibility?
    Thanks,
    Bradley

    Query the responsibility that you want to add the worklist to get the menu associated to it, then query up the menu and add the Advanced Workflow Worklist function to the menu along with a prompt like Worklist.

  • Mac book pro hanging very often what will be the possible cause for it?

    hi my mac book pro is 3months old and nowadays its hanging very often like when iam surfing, and some times when i dont use it for 10 to 15min.
    can anybody suggest me what will be the possible cause for it.
    Thanks

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Look at this one for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • ESS- Leave : You are not one of the possible agent for the task ws9021212?

    Hi ,
    I have copied the standard workflow template wa12300111 and assigned the new template in the customizing. When i apply leave from ESS working time , it says an error " You are not one of the possible agent for the task ws9021212? " .
    The similar kind of Error i have solved before in by making the workflow as GENERAL TASK in PFTC as follows.
    PFTC -> Choose "Workflow Template" from the drop down -> Enter the workflow template id "ws9021212" in the text box -> now click on "change" button -> Now goto the menu addional data -> agent assignment -> maintain -> select the task text -> and set it as general task.
    i have cleared the buffer also!
    BUT STILL I AM GETTING THE ERROR ?
    Please help me !
    Richard A

    hi Richard
    Try to do this way.  IN the workflow builder there is a button with hat. that is basic data. click on that and  it will go to another screen and u can find a apple button that is agent assignment for a task click that.
    It will open maintain agent assignment screen. click the text below that and click the attribute button and click the genral task. i think this will solve ur issue.
    If helpful kindly reward points
    Regards
    vijay

  • [svn] 2384: The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations , but we don't want to introduce this change in a Flex 3.0.x minor release.

    Revision: 2384
    Author: [email protected]
    Date: 2008-07-08 06:23:19 -0700 (Tue, 08 Jul 2008)
    Log Message:
    The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations, but we don't want to introduce this change in a Flex 3.0.x minor release. So I'm reverting this fix from the 3.0.x branch of ASC and checking in a new 1.4 downgraded asc.jar to reflect the change. This will be merged to other Flex 3 branches such as 3.0.3 and 3.1.0, but will not be merged to trunk.
    The change in behavior was noticed for Flex 3.0.x when a asc.jar was updated in revision 2108, and re-applied in revision 2129. Reverting this fix will resolve bug SDK-15924.
    QE: Yes
    Doc: No
    Checkintests: Pass
    Reviewer: Erik
    Bugs:
    SDK-15924 - Calling a .NET WebService always returns a fault (after build 2108)
    Other Bugs Referenced:
    ASC-3414 - with block uses local variable instead of object property when -warnings flag on
    Ticket Links:
    http://bugs.adobe.com/jira/browse/ASC-3414
    http://bugs.adobe.com/jira/browse/SDK-15924
    http://bugs.adobe.com/jira/browse/SDK-15924
    http://bugs.adobe.com/jira/browse/ASC-3414
    Modified Paths:
    flex/sdk/branches/3.1.0/lib/asc.jar
    flex/sdk/branches/3.1.0/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.java

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

Maybe you are looking for