Notification Center error with "apsd: MIG demux failed"

This error is flooding:
1/16/13 11:12:41.029 PM apsd[33669]: MIG demux failed. This message ID is invalid: 0x72fd8
killing apsd doesn't help.
I cannot open Notification Center by the icon on the menu bar, while two-finger gesture can. But I cannot close that, and cmd+tab, space switching, dock don't work, until "killall -HUP Dock". Well, the error message is still there.
I'm running OS X 10.8.3 (12D50)

I don't know if problems in beta version should be posted here...

Similar Messages

Notification center interferes with full-screen apps (incl. games)

The new notification center interferes with games.
When you are making control movements on the screen, a little grey tab keeps appearing at the top middle of the screen.
Just from using it, it seems the notification center has a full-screen mode and a normal mode. For apps which are running in full-screen (includes games, but also built in apps such as YouTube and Photos when they are in full-screen mode), the gesture which normally brings down the full notification center just brings down a little gray tab at the top middle of the screen. You can then slide that tab down, if you really want the notification center.
But in games, the tab keeps appearing when you don't want it, and it has nothing to do with the gameplay. Even in Photos and YouTube, I would be quite happy if the tab did not appear at all in full-screen mode (a single click on these apps takes them out of full-screen mode, then you can drag down the notification center anyway).
It would be very appreciated if an iOS update could add a notification center Settings option to disable the notification center tab drag-down, in full-screen mode.
I can understand that Apple are very unlikely to add an option to disable all notifications in full-screen mode; fair enough. And if a new notification does appear during a full-screen app, then of course dragging that down should still bring in the full notification center. What I don't want is the little grey tab appearing - when I'm just operating with an app in full screen mode, and no new notifications have arrived.
Mike

I agree with both posts and have the exact same issues with iOs 5. I also feel that I've been juked by Apple into upgrading to iOs 5. I had absolutely no desire to slow down my games and add a feature that would interfere with said games, which is all I've gotten with the notification center. No disable option? Seriously, that is just one of the most absurd things I can imagine.
And I hate to burst Apple's bubble, but your CPUs and iOs do NOT multi-task unless it's the 4s (which has two cores). If you (Apple) have the notification center running in the background at the same time that I'm playing my game or typing, the iphone 4 and all versions before it are going to lag or skip while processing the notification center while it ignores the current thread (ie games, interface, etc)! This is the reason the old system was implemented the way it was. I know this for a fact (for example, any games would pause immediately when you recieved a text message, because the iphone is only capable of processing 1 thread).
Honestly, I think apple intentionally added this feature in this way to try to force users to migrate to the 4s because it's a dual core phone, and it won't experience as much lag when running two tasks.
Just add a disable option, some people NEED the performance we had in iOs 4!

Basically it looks like Apple has introduced globally a bug in their notification center software with no known solution, every app using notification center throws a pop up on startup. All I find on this forum are overkill solutions like reinstalling/ro

iOS 7 Basically it looks like Apple has introduced globally a bug in their notification center software with no known solution, every app using notification center throws a pop up on startup. All I find on this forum are overkill solutions like reinstalling/rolling back the os, which no real user should to be forced to do for a minor bug of this nature.

It throws a popup only the first time you launch the app, to confirm whether you wish to have notifications enabled for that specific app.

Notification Center error ( Default Theme )

Hi Guys ,
I'm having an error in notificationcenter .
is that every time I open it I get a white stripe. in the menubar. (only with transparency turned)
Here I give two snapshots.
Notification Center closed (no stripe)
open (with stripe)
Any help ?
I repaired the permissions and nothing.
Hugs

I haven't seen anything of the sort. This may have something to do with how notification centre is handling the desktop wallpaper - have you tried with another wallpaper perhaps?

Tweeting from the Notification Center Error!

I wonder if you guys have this issue too.
I was tweeting about more than 5 tweets in a span of about a few seconds (Typed a short tweet, and sending it repeatedly).
Then soon after, it will hang all of the sudden when you click on "Tap to Tweet". It will only appear the Notification Center background, without weather or any other notifications. Time stops there which confirms that it has hanged.
Pressing the home button or swiping out from it doesn't help at all. Only by pressing the usual reset the iPhone style, Press and hold the Home and Power button helps.
This happens not only once or twice, but it has been countless number of times. I'm sure this is not just happened to have this bug.
I wonder if you guys have this issue on other iPhones or other iDevices.
Apple, if you are reading this, do fix this bug.
**This has spoilt the readings of my battery usage for the day.**

Have not heard this yet, but also, your only speaking to users here, not apple. But you can give them feedback here.
http://www.apple.com/feedback/

Terrible error with kerberos, win2003 - Checksum failed!

Now i'm trying to use CAS SSO with kerberos for authentication.
I done all settings by instruction, see this tutorial http://www.ja-sig.org/wiki/display/CASUM/SPNEGO.
So, the error is: Failure unspecified at GSS-API level (Mechanism level: Checksum failed).
I guess, there is a problem with encryption type, but i don't know how to resolve it. Please help
My stacktrace shown below:
Caused by: GSSException: Failure unspecified at GSS-API level (Mechanism level:
Checksum failed)
        at sun.security.jgss.krb5.Krb5Context.acceptSecContext(Krb5Context.java:
741)
        at sun.security.jgss.GSSContextImpl.acceptSecContext(GSSContextImpl.java
:323)
        at sun.security.jgss.GSSContextImpl.acceptSecContext(GSSContextImpl.java
:267)
        ... 75 more
Caused by: KrbException: Checksum failed
        at sun.security.krb5.internal.crypto.ArcFourHmacEType.decrypt(ArcFourHma
cEType.java:85)
        at sun.security.krb5.internal.crypto.ArcFourHmacEType.decrypt(ArcFourHma
cEType.java:77)
        at sun.security.krb5.EncryptedData.decrypt(EncryptedData.java:168)
        at sun.security.krb5.KrbApReq.authenticate(KrbApReq.java:267)
        at sun.security.krb5.KrbApReq.<init>(KrbApReq.java:134)
        at sun.security.jgss.krb5.InitSecContextToken.<init>(InitSecContextToken
.java:79)
        at sun.security.jgss.krb5.Krb5Context.acceptSecContext(Krb5Context.java:
724)
        ... 77 more
Caused by: java.security.GeneralSecurityException: Checksum failed
        at sun.security.krb5.internal.crypto.dk.ArcFourCrypto.decrypt(ArcFourCry
pto.java:388)
        at sun.security.krb5.internal.crypto.ArcFourHmac.decrypt(ArcFourHmac.jav
a:74)
        at sun.security.krb5.internal.crypto.ArcFourHmacEType.decrypt(ArcFourHma
cEType.java:83)
        ... 83 more

Thank you for advice, my friend.
I have analyzed info in TGS-REQ request, but i could not find any SPN in it.
Please see this screenshot and say me: where is needed SPN in ticket?
Here is my full configuration:
[logging]
[libdefaults]
ticket_lifetime = 24000
default_realm = MYCORP.KUBA
dns_lookup_kdc = true
dns_lookup_realm = true
default_tkt_enctypes = rc4-hmac des3-hmac-sha1 des-cbc-crc
default_tgs_enctypes = rc4-hmac des3-hmac-sha1 des-cbc-crc
[realms]
MYCORP.KUBA = {
kdc = mycorp.kuba:88
admin_server = mycorp.kuba:749
default_domain = mycorp.kuba
[domain_realm]
.mycorp.kuba = MYCORP.KUBA
mycorp.kuba = MYCORP.KUBA
[domain_realm]
.mycorp.kuba = MYCORP.KUBA
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
<bean class="org.jasig.cas.support.spnego.authentication.handler.support.JCIFSConfig"
          p:jcifsDomainController="xxx"
          p:jcifsNetbiosWins="xxx"
          p:jcifsServicePrincipal="HTTP/MYUSER.mycorp.kuba"
          p:jcifsServicePassword="secret"
          p:useSubjectCredsOnly="true"
          p:kerberosDebug="true"
          p:kerberosRealm="MYCORP.KUBA"
          p:kerberosKdc="xxx"
          p:kerberosConf="c:/winnt/krb5.conf"
          p:loginConf="C:/mypath/WEB-INF/login.conf"
     />
jcifs.spnego.initiate {
   com.sun.security.auth.module.Krb5LoginModule
   required
   debug=true
   realm="MYCORP.KUBA"
   principal="HTTP/MYUSER.mycorp.kuba"
   storeKey=true
   doNotPrompt=false
   client=true
   refreshKrb5Config=true
   storePass=true
   isInitiator=false
   useKeyTab=true
   useTicketCache=false
   keyTab="c:\a.keytab"
jcifs.spnego.accept {
   com.sun.security.auth.module.Krb5LoginModule
   required
   debug=true
   realm="MYCORP.KUBA"
   principal="HTTP/MYUSER.mycorp.kuba"
   storeKey=true
   doNotPrompt=false
   client=true
   refreshKrb5Config=true
   storePass=true
   isInitiator=false
   useKeyTab=true
   useTicketCache=false
   keyTab="c:\a.keytab"
setspn -A HTTP/MYUSER.mycorp.kuba myuser
ktpass -out a.keytab -princ HTTP/[email protected] -pass secret -mapuser [email protected] -ptype krb5_nt_principal -crypto RC4-HMAC-NTWhat is wrong with it? Please correct it if you can?

Error with VF02-header-output fails

Hi all
Vf02 is giving some errors, when you try to print the invoice via header-output
it complains that it failed to process
and when i try to get the detailed log
it says can not load the graphics!!
i checked se78 to find out the graphics but could not succeed much
this sis a smartform i think
can you please give some advise?

hi sai
how can you check whether the graphic fits in smartforms?
i have not done smartforms before
please let me know

Stocks Won't Turn off in the Notification Center

I got an iPhone 5s yesterday. I don't want the stocks to display in the notification center so I turned them off (made sure the stocks button was unchecked). I also turned them off in the background app refresh area under Settings > General. The stocks are still appearing in the notification center (even with both options off). I reset my iPhone and they are still appearing. I tried to search online and I can't seem to find anyone else with the issue.
Do I need to restore my iPhone and start over? I would appreciate any help since I do not want the stocks to display at all.
Thanks in advance.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Cannot re-enable notification center

i disabled it(while running mountain lion 10.8) ! but while enabling it back(just to check) i see two notification center icons(with two sizes 3.9 MB and 3.3MB) in my finder(currently running mountain lion 10.8.3) and when selected 1st one(3.9MB), nc launched ! but after start-up its gone. i can launch it temporarily by just double-clicking on it. the other one (3.3MB) does nothing. i also noticed one icon named usernotificationcenter in my finder. help !!

Hi baltwo,
Here's a better example:
set app_name to "Notification Center"
(path to application app_name) as string
gl,

Why is the notification center not showing?

This has happened like... 7 times since I updated (I may had happened before, but I think it was the update). It just don't work. I get a message or some push from any app and I can pull the banner down; else, I can't get to make appear the notification center, even with notification pendings. And this last untl I reboot the phone (hard or simple way).
I just hoped someone could clear me out in this: Is it an iOS internal problem, a bug they missed? I've seen a few by the way, and I don't even know where to report them...

It's not a bug, but it is something wrong with your phone. If it were a bug you would see huge numbers of posts about it, like this:
Is the phone jailbroken? If it is you've found the cause. If it isn't connect to iTunes and Restore the phone using the button on the summary screen.

Error opening the notification Center. I can't open the notification Center

Error opening the notification Center. I can't open the notification Center

Hey amabnn,
Thanks for the question. I understand you are experiencing issues with the latest iTunes update. Let’s troubleshoot the iTunes installation by completely removing and reinstalling iTunes and all related components (it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Additional Information:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thanks,
Matt M.

Ricoh Aficio MP C2051 Scan to Folder - Windows 7 64 bit Error: Authentication with the destination has failed check settings

I got an issue with OS of widows 7.
unable to scan documents to user's PC.am getting error message "Authentication with the destination has failed. Check settings. To check the current status, press [Scanned Files Status
Other Windows xp PC can do this.
How can I fix this problem?
Printer Model :C2051 /mp2001sp

Hi,
I searched for the error and it is mentioned in Ricoh's website:
Messages Displayed on the Control Panel When Using the Scanner Function
http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001045/0001045718/view/trouble/int/0036.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Message
Cause
Solution
“Authentication with the destination has failed. Check settings. To check the current status, press [Comm. Status/Print].”
The entered login user name or login password is not correct.
Check that the user name and password are correct.
Check that the ID and password for the destination folder are correct.
A password of 128 or more characters may not be recognized.
From the solution, it mentioned that the issue could relate to user account or its password.
Please let me know if it is in domain environment. If so, please test to log the same user account currently on Windows 7 to Windows XP and see if issue persists.
Also please test to directly access the scanning folder on printer server to see if there is any issue in accessing the destination folder.

I need help none of my notifications are coming to my iphone 4 and in the notification center everything is turned on i reset and restored my phone but it's still not working i need help with this asap

My iphone 4 will not push my notifications to my phone. I reset and restored it and still nothing. I even set it up as a new phone in still nothin can anybody help me.

Hi R. Weav27,
Thanks for using Apple Support Communities. This article has some troubleshooting steps for issues with push notifications:
iOS: Understanding notifications
http://support.apple.com/kb/ht3576
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection.
Note: Notifications use Wi-Fi only when a cellular connection is unavailable. Firewalls and proxy servers may affect your ability to receive notifications. For more information, see Unable to use Apple Push Notification service (APNs).
If you're not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
Cheers,
- Ari

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

Import error imp-00017: following statement failed with oracle error 1659:

Hi all,
I am trying to import a file (dmp) which is of 1.63GB size,
when I type
imp
dbname/pwd@db
c:\filepath
30720
no
no
yes
yes
yes
I am getting the error imp-00017: following statement failed with oracle error 1659:
-- end it says Ora-01659 unable to allocate minextents beyond 1 in tablespace USERS
--unable to create INITIAL extent for segment in tablespace USERS
--import terminated successfully with warnings
when I looked into
select maxbytes,file_name from dba_data_files where tablespace_name='USERS';3.4360+10 c:\oracle\product\10.2.0\oradata\orcl\users01.dbf
kindly help me in solving this is.
Regards,
aak
Edited by: AAK 460425 on Apr 12, 2009 6:33 PM

Thanks,
select bytes from user_free_space where tablespace_name='USERS'
BYTES
458752
720896
458752
655360
43384832
is the size less?
My apology I have updated this in the below thread, which is same as this one.
Re: Import error

Notification Center error with "apsd: MIG demux failed"

Similar Messages

Maybe you are looking for