Notification Center should have the date too

I have an iPod touch last generation and i have the calendar app in the bottom deck so every time I have to check the date I just press the home button (if I am writing a email or something like that) but I think it could be a lot better if the notification center had the date too! Either in a place designated by apple or by the user. In fact I don't even use the weather app. I will really use the date instead of the weather. Right now I disable the weather.
Also I don't get all the Facebook notifications (I get some) do I have to leave the app running to get all the notifications or can I close the app (closing app by tapping home button holding and taping red dot)?
Does anyone else feels the same about the calendar app?
(yes I am running ios5)

Spot on. We need the date easily accessible from all apps. Notification center is the right place. Maybe a redesigned calendar widget with the date and the next appt will do.
Little tweaks like this keep bringing us back to the JB year after year!
Thanks.

Similar Messages

Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0. The notification should read the date and time you updated email receiving. Does anyone elsehave this problem?

Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0. Two days later it is still saying Mar 30. The notification should read the date and time you updated email receiving. Does anyone else have this problem? Is there a solution to this?

We want to make sure your phone is in working order Mb_in_NC. I know it can be difficult when you see different times. What is your make/model of your device? When did it start? Do you have a different time on any other applications?
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Billing date should be the date it create

Hi
Currecntly we are creating billing document based on the dilivery in that case billing document date dake as the delivery date all accounting enteries post based on the dilivery date.
But we need to change this when billing is created it should take the date it creates with out taking the delivery date.
please advice how to do this chage..
Thanx in advance !!
Regards
Kesharika

Hi Kesharika,
If invoice dates are defined for the customer, the system proposes the
billing date from the invoice date calendar. If no invoice dates are
agreed, then the actual goods issue date is formed on the basis of
delivery related billing. In order related billing, the billing date of
the order forms the basis of the billing date.
If you want different system behavior, you may consider writing your
own copy control routine and assign it under 'Data VBRK/VBRP' in trx
VTFA. Or you have to manually key in the system date as the billing
date in VF01.
In case you want to cancel a billing document and you want to change the
billing date (VBRK-FKDAT) of the cancellation into today' date as the
default on the cancellation, you have this possibility:
In the level of invoice type (Transaction VOFA), every invoice type has
its own cancellation type.
==> VOFA 'Billing: Document Types' for example: billing type F2 invoice
Cancell.billing type 'S1' Invoice Cancellation
Copying requirements ' ' < Here
You've got the possibility to deposit an additional copying requirement.
against your cancellation type. In here you can set the billing date on
the document to whatever date you require. Eg: VBRK-FKDAT = SY-DATUM.
would set it to the date the document is being cancelled (see note
43318).
Cheers,
Alex

Apple reminders do not disappear from "all" and "missed" view when dismissed from "today" view of notification center by marking the circle by the reminder. why is this?

Firstly, I really like the new reminders in iOS 7. However, I noticed that apple reminders do not disappear from "all" and "missed" view when dismissed from "today" view of notification center by marking the circle by the reminder. it requires me to take an extra step and click on "all" and then click the "x" to make it completely disappear and clear from notification center.
why is this? am i doing something from?

unfortunately, that does not address my question. your link describes how to clear the missed section of center. I know how to clear the missed section of notification center, as I said in the original question. I will re-peat my question to clarify. it is:
apple reminders do not disappear from "all" and "missed" view when dismissed from "today" view of notification center by marking the circle by the reminder. it requires me to take an extra step and click on "all" and then click the "x" to make it completely disappear and clear from notification center.
why is this? am i doing something wrong?
the behavior I would expect would be that when i click the circle on the "today" view. it would clear it out from the missed and all view so i would not have to clear in 2 areas.
I Hope this clarifies...

I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

They will simply use Migration Assistant to transfer your Home folder, third-party applications and support files, and system preferences. This is something you could do yourself. You would need a Firewire cable to connect between your old computer and your new one. Migration Assistant is installed in the Utilities folder of your new computer.
See Transferring files between two computers using FireWire and How to use Migration Assistant to transfer files from another Mac.

What should be the data type for a field in ztable?

i am desing a ztable , wht should be the datatype for a field if i want to enter values like -1.5 and -2.5 , negative values with decimals what should be the data type???

declare as P type. TYPE P DECIMALS 1
Type P data allows digits after the decimal point. The number of decimal places is generic, and is determined in the program. The value range of type P data depends on its size and the number of digits after the decimal point. The valid size can be any value from 1 to 16 bytes. Two decimal digits are packed into one byte, while the last byte contains one digit and the sign. Up to 14 digits are allowed after the decimal point. The initial value is zero. When working with type P data, it is a good idea to set the program attribute Fixed point arithmetic.Otherwise, type P numbers are treated as integers.
You can use type P data for such values as distances, weights, amounts of money, and so on.
Also check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb2fd9358411d1829f0000e829fbfe/content.htm
Regards,
Maha

I have old Macintosh LC that recently passed on, anyone know where I can get this repaired or have the data transferred into something else?

I have an old Macintosh LC that recently went down. I am located in the Portsmouth, NH area.
Anyone know where I can get this repaired or have the data transferred??

How much $$ do you care to spend to transfer the data on the LC's 40 or 80 MB hard drive? The original LC is now 21 years-old and has little if any market value (I know - I have an LC I and an LC III), so professional repair will easily exceed that. It's considered "obsolete" by Apple's authorized repair shops, so parts are not available. Was it starting up normally before it stopped working, and if so, were the date & time always correct after it had been disconnected from an electrical outlet? If not and if startups have been hit or miss for a while, your LC undoubtedly needs a new PRAM battery installed. It's a 3.6-volt ½AA lithium battery and is installed in a black plastic holder w/retainer cover clipped over it on the LC's motherboard. The battery can be purchased at battery specialty retailers for about $8 or less, as well as from a number of online merchants. If you don't mind paying 2-3 times the value of the battery, Radio Shack carries it. If you need directions for installing the battery, post back. It's the least expensive thing to try and a new battery has brought many a dead Mac back from the dead. As for the internal hard drive, it could be removed and installed in a slightly newer, pre-G3 Power Mac having an internal SCSI bus. If there are any thrift stores in your area, you might find a suitable Mac for this purpose. This would involve removal of the hard drive from the LC and installation in the newer Mac, with a slight change in the LC's SCSI address jumper placement. Once installed in the newer Mac, the files could be copied. If this is more challenging than you planned on, you might check your area for a Mac User Group, where you might be able to take your LC and have someone transfer the files for you. After the files have been transferred to another medium, you may have problems trying to open them on a newer Mac running a newer OS version than the LC's (System 7.0, 7.1, 7.5.x, or 7.6), if the programs aren't compatible.

Why cant I have the date format like this: 1/2/07, it converts to Jan 2

Why cant I have the date format like this: 1/2/07, it converts to Jan 2, 2007
I want to keep it like that because, I transported a huge spreadsheet from my PC, and it has like this: 1/1/07, and there is way to many, to go back and change. Please help. Thank you.

Hello
Welcome to the club.
The response seems to be simple.
Those who wrote the Help are not those who wrote the PDF User's Guide which are not those who coded the application.
As on this forum you will met only users trying to help other users, no one would be able to tell you if what we got is a bug or a design flaw.
Like many of us,
*Go to "Provide Numbers Feedback" in the "Numbers" menu*, describe what you wish: a way to define the default format used as Automatic date/time.
Then, cross your fingers, and wait for iWork'09
Yvan KOENIG (from FRANCE mardi 15 janvier 2008 15:10:17)

I want to have the date on my photos.

I have been taking photos of an abused pony. The owner will be prosecuted and hopefully my photos will be used as evidence in court against the owner.
I want my photos to have the date they were taken on them when I print them or put them on a disk. I noticed that when I exported them to a folder on the desktop, they only had the date I exported them rather than took them.
How can I do this? I cannot find anything on iPhoto that will put the date onto the photo or anything in my camera. Get Info in iPhoto will tell you when the photo was taken but does not let you have a date on the actual photo.
Any ideas. If I succeed, this could make all the difference. I suppose I could drag my iMac to Court if required!!!
I tried looking on my camera but it won't help either - Canon S2 IS.
Thanks
Francesx

Frances
Putting the date onto a pic is the business of the camera, there is no way to do it in iPhoto.
When you export a pic, the Finder reports the date that the file was made - i.e the Export date. However, the date the photo was made is contained in the EXIF data that's exported as part of the metadata of the file. You can read the EXIF data with an app such as EXIF VIEWER from http://homepage.mac.com/aozer/EV/.
However, as the dates can be altered on a camera, as can the EXIF data, very easily, any saavy lawyer will be able to challenge the dates of the pics, if they're important. A better way to do it is, if you can, add something date specific into the shot when you take it - that day's newspaper, for instance. Or have someone prepared to testify to the dates and times of the pics.
Regards
TD

Guys ... I have a 2008 MacPro running the current Yosemite. I also have installed the sound amp called "BOOM!" I have the Sound set to Line Out which should have the computer boot up to BOOM! Instead, it boots up to the Internal speaker. What's up?

Hi Folks ...
I have a 2008 MacPro running the current Yosemite. I have installed the recommended upgraded video card, but the sound is as it was new. I also have installed the sound amp/graphic equalizer called "BOOM!" I have the Sound set to Line Out which should have the computer boot up automatically to BOOM! and thus to the external speakers. Instead, it boots up to the Internal speaker. According to the folks at "BOOM!", this is happening to others who have similar Macs. They can't find any explanation within BOOM!, so I am turning to you all. Any ideas?

Hi Kappy ...
Sorry, I guess I didn't state the problem very well.
I don't want the computer to boot up to the internal speaker. I want it to boot up to the external speakers. However, even though System Preferences is set on Line Out, when the computer boots up or reboots, it erroneously goes to internal speaker. So, every time I boot up, I have been going to System Preference/Sound and clicking on Line Out. From that point on, everything is OK until the next boot up. It is a small annoyance, but annoying all the less. The simple explanation seems to be that when the computer is shut down, it does not hold the setting for Line Out and resets itself to Internal Speaker. How do I change that behavior and get it to go to Line Out whenever it boots up?

What should be the date in Excise Part 1 & 2 registers /tables

Hello CIN experts ,
what should be the date in the excise registers & tables ? SYSDAT OR BUDAT?
the std SAP takes SYSDAT , but actually speaking for incoming excise invoice the posting date should be taken , as it may not be always practically possible to update SAP system in time . In my clients case the entries are always made in the next day . Hence i would like to know ... what should be be the date in excise registers Legally Speaking
Pls pls pls clarify ...
Regards
Anis

hello CIN experts .. where r u ? pls pls give in ur so so valuable inputs ....

What should have the next update of Windows Phone ...

In the next firmware update of Nokia Lumia 1020 and all the Windows Phone 8.3 update should have at least 4 extra functions and 8 updates.
1. To exist 4 arrows up, down, left and right or at least the 2 basic arrows which is left and right in typing messages keyboard.
Cause i have big fingers and i cant go exactly to the letter of the word that i want to correct - change.
2. In typping messages i prefer to draw the letters just as i was writing to a blank paper or at least like SWYPE.
3. I want to predownload the Sattelite View maps of a country and not just the ordinary one.
4. It should have Ring Profiles such us Meeting, Loud Area, Silence and other.
A. Need update the levels of the brightness of the screen.
At this moment it has only 3 steps (Low-Medium-High), so it needs at least 2 more such us (Very Low and Very High).
B. In Screen Lock needs up to 10 options for software fast state.
C. In Fast Eye View in Night Mode should have not only 3 colors such us (Red,Green,Blue) but all the 20 colors that Thems has.
The Size of the clock should be adjustable and not just one size.
It should have at least 3 sizes (Small-Medium-Large).
D. The camera should take only 1 photo in 38MP and not 2 photos 5MP+38MP.
Also we should have the ability to edit the 38MP on my phone and not only on my PC.
E. In Bluetooth i dont have any options.
I need to change my BlueTooth Name and i cant.
Also I want to set some BlueTooth devices to white and black list and i cant.
F. I should have the option to know how much battery i have in percentage between 0-100% also in minutes left.
G. In Wifi options i should know how much in percent is the signal between 0-100%.
H. The tiles even when it is in small or medium size should be move as it was in large size.
Also anyone who has any ideas that should been add any new funtion or anything else in the next Widnows Phone Update added down please.
P.S. I have the Nokia PureView 808 and i want to transfer Contacts, Messages, Calendars, Notes, Photos, Music, Videos to my new Nokia Lumia 1020 and i cant.
How can i transfer it all fast, secure and easy?

Hello Paul.
Thank you for your time and for your continue helping me.
I see all help Nokia Videos and i did all your steps tha you suggest me.
1. Ok but is says up something about Hotmail can i remove the hotmail option also?.
2. I deselect the Sync for the accounts but still left some contacts inside my phone.
Also when i want to backup my telephone numbers what i must do but not get messed with the email accounts.
I want to backup the phone numbers as i did with my nokia account.
My nokia account doesnt work with my lumia 1020.
3. In the 1st i need to tap 2 times and then save.
Cause the 1st menu is History Calls and if i tab once continue then the only option that i have is erase element.
When i tab once then it goes me to profil for call and sms so i tab continue the call number and gives me the option copy.
This to moves could be as one as it is in Symbian Belle.
Not need to tab 2 times.
In the 1st menu when i tab continue should give me 3 options Edit,Copy,Erase.
Thats why Symbian Belle still rules.
4. I dont want to use 1st the name cause also i have more contacts that have the same name than have contacts who have the same last name.
Also many of the names and last names i have it use more than 10 characters in 1st and in last name each.
So total is more than 20 characters without spaces or other characters.
for example "Panagiotis Papadopoulos" is 23 characters most of the names that i have inside is between 20-30 characters.
Please do something about that.
5. Still need fix must disconnect the volume zoom from ringtone and vibration.
Also need vibration some choices as continoues or with short pauses or increasing - decrease vibrating.
6. I have 3 classes which are 40 people in each.
So total is 120 students.
I cant do 6 Groups for informing them.
I need 1 up to 3 Groups not more.
Also my co-workers are about 100 I cant do more than 1 or 2 Groups.
My relatives are also about 60 also i need 1 Group again.
I cant have so many groups as you tell me.
Basicly I need 3 Groups to be easy and practicaly for me not 20 Groups.
If Groups is not about then for what is?
Also why in Symbian Belle i could add as many as i wanted and here i cant?
What then i need to do 3 Groups?
7. I try to do what you are telling me and it works only when i am not use 1st the search button.
1st i must found the people that i want to inform.
For example i set character 1 for class 1
then when i use the search to find who is in class 1
then shows me all the students in class 1
but i must choose everyone, one by one and do all the same steps from the beggining.
it should give me the option when has found the 30 person to set some box in the left and chooce all of them.
That is not happening.
Please check it.
8. Finaly I found my 5MP + 38MP in the phone but 1st i must extract the 38MP to my computer so to edit.
But i want to use always only my 38MP and never my 5MP photos.
So we need some how to disable the option to take 2 pictures one 5MP and one 38MP.
Its must take only one 38MP and nothing else.

HT201302 please help.. i lost all the data in my ipad after upgrade to ios 702 i want my 3500 pictures back.. please help.. because my i tune also dont have the data

please help.. i lost all the data in my ipad after upgrade to ios 702 i want my 3500 pictures back.. please help.. because my i tune also dont have the data. please anybody help me...

Only possible if you have made an iTune or iCloud backup before the update.

HBO gives me a message saying I can not watch a movie because my browser does not support it and I need safari 3 or higher. i have an Ipad 3 with the last Ios 6.1 software, I think I should have the last Safari version, then

HBO gives me a message saying that my browser does not support the service and that I need Safari 3 or higher, I have an ipad 3 and just downloaded the last version of Ios from Itunes, so I believe I should have the last safari version
If someone knows what may be happening please tell me
Thanks

You can't watch HBO using the Safari browser on the iPad at all. HBO has an app in the App Store called HBO GO. You must subscribe to HBO in order to use it
https://itunes.apple.com/us/app/hbo-go/id429775439?mt=8

I have a Macbook Pro early 2011. i don't have AirPlay on my computer. How can I get it. I have read that early 2011 should have the AirPlay option. Any ideas please.

I have a Macbook Pro early 2011. i don't have AirPlay on my computer. How can I get it. I have read that early 2011 should have the AirPlay option. Any ideas please.

Hi All,
I need your expert advice to proceed. I bought apple TV and it works fine with my iPad and iPhones also fine with itune of my Mac Book Pro BUT I am not seeing setting which says "Airplay Mirroring" in system preference -> Display at all.
I checked my mac serial number and it shows the model as below. As far as I understood this feature should be there from 2011 onwards.
MacBook Pro (13-inch, Late 2011)
Software Mac OS X Lion 10.7.5 (11G63b)
Please suggest!!
Thanks and Regards

Notification Center should have the date too

Similar Messages

Maybe you are looking for