Notification event - License usage exceeded its capacity. The overused license is The usage is 83. The license capacity is 8

I am getting this alert in vrops. any idea why? The license I used is the vcloud standard license

I had the same Notification.
What I ended up doing was removing the "Product Licensing" group and the creating a new with the vCloud licenses attached. Then proceeded to add any and all things I could and ended up using 0 licenses.
Very odd. Using 90 before and after adding everything I could find in the membership configuration I did not use any licenses anymore.

Similar Messages

  • HT4972 i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........I seem to be

    i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........
    I seem to be having the same problem on my brand new iPhone 4S. Everything was working fine on the phone until I updated to iOS 5.1.1, but now I no longer receive push notifications for the native Mail app, Instagram, or the Facebook app. I still seem to be receiving SMS texts and iMessages via push, but the aforementioned apps need to be opened before I can receive missed notifications (having them open in the background seems to make no difference).
    Thanks for any help that you may provide!

    did you try notifications under settings? You can customize it as per your requirement, for each application.
    check this out: http://www.gottabemobile.com/2011/10/12/ios-5-how-to-use-notification-center/ or http://reviews.cnet.com/8301-19512_7-20120625-233/ios-5-notifications-a-deeper-l ook/

  • Want to change my16giga byte ipad mini with retina display to the 32giga one because i think its capacity is insufficient. So could i change to 32giga by giving an extra charge. I bought 16giga ipad mini on thanksgivingday, maybe 30. November

    I want to change my16giga byte ipad mini with retina display to the 32giga one because i think its capacity is insufficient. So could i change to 32giga by giving an extra charge. I bought 16giga ipad mini on thanksgivingday, maybe 30. November

    If bought directly from an Apple Retail store or Apple Online store, and is still within the 14 day return period Apple Offers you can take it back and get a full refund which you can then use towards buying the other version.
    If its already past the 14 day period then you won't be able to return it for a refund no.
    If you did not buy it from an Apple Retail store or Apple Online Store you will have to consult with the store you bought it from about their return policies.

  • Clustered role 'Cluster Group' has exceeded its failover threshold.

    Hello.
    I’m hoping to get some help with a cluster issue I’m having using Windows Storage Server 2012.
    When the cluster is created my Cluster Core Resources are all happy and online.
    I can more the Cluster Name using “move Core Cluster Resources” between the two nodes without any problems.
    If I select ‘Simulate Failure’ on the IP Address resource, it works the first time
    If I do it again shortly after it fails and I get an Event ID 1254, 1205 and 1069.
    Event ID 1254
    Clustered role 'Cluster Group' has exceeded its failover threshold. 
    It has exhausted the configured number of failover attempts within the failover period of time allotted to it and will be left in a failed state. 
    No additional attempts will be made to bring the role online or fail it over to another node in the cluster. 
    Please check the events associated with the failure.  After the issues causing the failure are resolved the role can be brought online manually or the cluster may attempt to bring it online again after the restart delay period.
    Event ID 1205
    The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
    Event ID 1069
    Cluster resource 'Cluster IP Address' of type 'IP Address' in clustered role 'Cluster Group' failed.
    Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. 
    Check the resource and group state using Failover Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
    Basically I’m trying to simulate a network failure to make sure the failover kicks in.
    If I click on it and ‘Bring Online’ it comes up fine.
    Where do I find this Threshold Policy and set it to initiate failover if the IP Address resources fails?
    Thank you in advance for your help.

    Hi,
    The failover threshold is the number of times the group can fail over within the number of hours specified by the failover period. For example, if a group failover threshold is set to "5" and its failover period to "3," the clustering software stops attempting
    to bring the group online and leaves the resources within the group in their current state. For example, if the IP Address resource is brought online but the Network Name resource fails, the group is left offline, but the IP Address resource is left online.
    To configure thresholds for a resource:
    Right-click the cluster resource and then select 'Propereties'
    Click 'Advanced'
    Select 'Do not restart' if the cluster service should not attempt to restart. Restart is the default
    If 'Restart' is selected:
    Affect the Group: uncheck to prevent a failure of the selected resource from causing the Server group to failover
    Threshold: number of times the cluster service will attempt to restart the resource, and period is the amount of time in seconds between retries
    Do not modify the 'LooksAlive' and 'IsAlive' settings
    Unless necessary, do not alter the 'Pending Timeout'. This is the amount of time the resource is either in the online or pending or offline pending states before the the cluster service puts it in either offline or failed state
    For more information please refer to following MS articles:
    Windows Failover Clustering Overview
    http://blogs.technet.com/b/rob/archive/2008/05/07/failover-clustering.aspx
    Tuning Failover Cluster Network Thresholds
    http://blogs.msdn.com/b/clustering/archive/2012/11/21/10370765.aspx
    Failover cluster (group) maximum failures limit
    http://blogs.msdn.com/b/arvindsh/archive/2012/03/09/failover-cluster-group-maximum-failures-limit.aspx
    Lawrence
    TechNet Community Support

  • Clustered role 'Availability Role' has exceeded its failover threshold

    I am getting this alert on SQL 2012 R2 SP1. So please kindly tell me the solution of the below given alert on windows failover clustering .
    Clustered role 'Availability Role' has exceeded its failover threshold. It has exhausted the configured number of failover attempts within the failover period of time allotted to it and will be left in a failed state. No additional attempts will
    be made to bring the role online or fail it over to another node in the cluster.Please check the events associated with the failure. After the issues causing the failure are resolved the role can be brought online manually or the cluster may attempt to bring
    it online again after the restart delay period.

    Hi Syed Tauseef Ahmed,
    Please offer more information such as under what circumstances this issue occurs, what event id you have got. The failover threshold is the number of times the group can fail
    over within the number of hours specified by the failover period.
    The related KB:
    Tuning Failover Cluster Network Thresholds
    http://blogs.msdn.com/b/clustering/archive/2012/11/21/10370765.aspx
    You can refer the following similar thread for the first step troubleshooting:
    Clustered role 'Cluster Group' has exceeded its failover threshold.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4eb44f05-eb9b-448a-821b-359879141608/clustered-role-cluster-group-has-exceeded-its-failover-threshold
    I’m glad to be help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • [SOLVED]dmraid: "sda: p4 exceeds device capacity" errors during bootup

    hello all.
    I made my first raid and arch64 setup. everything is working and its fast
    My laptop (asus g71v) suports raid, and i've managed to get it to work with windows and linux, using intel raid setup in bios.
    I'm using dmraid to create the fakeraid devices in /dev/mapper and system boots. But I can see this errors. It looks that linux is trying to acess the discs directly and gives structure errors.
    dmesg
    scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM            Optiarc  BD ROM BC-5500S  1.C0 PQ: 0 ANSI: 5
    scsi 4:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sda: p4 exceeds device capacity
    sd 0:0:0:0: [sda] Attached SCSI disk
    sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1 sdb2
    sd 4:0:0:0: [sdb] Attached SCSI disk
    attempt to access beyond end of device
    sda: rw=0, want=1250273160, limit=625142448
    Buffer I/O error on device sda4, logical block 114340848
    attempt to access beyond end of device
    sda: rw=0, want=1250273160, limit=625142448
    Buffer I/O error on device sda4, logical block 114340848
    attempt to access beyond end of device
    sda: rw=0, want=1250273272, limit=625142448
    Buffer I/O error on device sda4, logical block 114340862
    attempt to access beyond end of device
    sda: rw=0, want=1250273272, limit=625142448
    Buffer I/O error on device sda4, logical block 114340862
    attempt to access beyond end of device
    sda: rw=0, want=1250273280, limit=625142448
    Buffer I/O error on device sda4, logical block 114340863
    attempt to access beyond end of device
    sda: rw=0, want=1250273280, limit=625142448
    Buffer I/O error on device sda4, logical block 114340863
    attempt to access beyond end of device
    sda: rw=0, want=1250273280, limit=625142448
    Buffer I/O error on device sda4, logical block 114340863
    attempt to access beyond end of device
    sda: rw=0, want=1250273280, limit=625142448
    Buffer I/O error on device sda4, logical block 114340863
    attempt to access beyond end of device
    sda: rw=0, want=1250273280, limit=625142448
    Buffer I/O error on device sda4, logical block 114340863
    attempt to access beyond end of device
    sda: rw=0, want=1250273280, limit=625142448
    Buffer I/O error on device sda4, logical block 114340863
    attempt to access beyond end of device
    sda: rw=0, want=1250273280, limit=625142448
    attempt to access beyond end of device
    sda: rw=0, want=1250273224, limit=625142448
    attempt to access beyond end of device
    sda: rw=0, want=1250273272, limit=625142448
    attempt to access beyond end of device
    sda: rw=0, want=1250273280, limit=625142448
    attempt to access beyond end of device
    sda: rw=0, want=1250273280, limit=625142448
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
    ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
    ReiserFS: dm-3: using ordered data mode
    ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: dm-3: checking transaction log (dm-3)
    ReiserFS: dm-3: Using r5 hash to sort names                                                                                                                                                                                                  [
    mkinitcpio.conf
    MODULES="ahci sd_mod reiserfs"
    HOOKS="base udev autodetect dmraid"
    is there a way to remove this errors? thanks, and sorry my english
    Last edited by TigTex (2009-01-14 03:02:04)

    ... latest kernel update solved all my problems and added a nice performance boost.

  • Queue exceed maximum capacity of '256' elements.

              Has anyone seen this one before??
              Thanks
              Thomas
              weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity
              of: '256' elements.
              weblogic.utils.UnsyncCircularQueue$FullQueueException:      of: '256' elements
              at weblogic.utils.UnsyncCircularQueue.expandQueue(UnsyncCircularQueue.java:72)
              at weblogic.utils.UnsyncCircularQueue.put(UnsyncCircularQueue.java:94)
              at weblogic.kernel.ExecuteThreadManager.execute(ExecuteThreadManager.java:343)
              at weblogic.kernel.Kernel.execute(Kernel.java:338)
              at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:304)
              at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:923)
              at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:844)
              at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
              at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
              at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
              at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:681)
              at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:627)
              at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:123)
              at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              

    Hi,
              The queue in question here is not a JMS queue. Instead,
              this is the "execute queue" of jobs waiting to be
              serviced by a thread in its thread pool.
              I think the size of these queues is configurable on the
              thread pool. Note that if dead-lock is locking up threads
              and causing the problem,
              you will likely need to increase the number of threads
              or dedicate server-side resources to their own thread pools
              rather than (or in addition to) increasing the size
              of the execute queues. (A thread dump helps
              in diagnose dead-locks.)
              Likely this error is on a server side thread pool, so
              there should be warnings/error messages in the server logs
              that describe what is happening.
              Tom
              Thomas Kreig wrote:
              > Has anyone seen this one before??
              > Thanks
              > Thomas
              >
              > weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity
              > of: '256' elements.
              > weblogic.utils.UnsyncCircularQueue$FullQueueException:      of: '256' elements
              > at weblogic.utils.UnsyncCircularQueue.expandQueue(UnsyncCircularQueue.java:72)
              > at weblogic.utils.UnsyncCircularQueue.put(UnsyncCircularQueue.java:94)
              > at weblogic.kernel.ExecuteThreadManager.execute(ExecuteThreadManager.java:343)
              > at weblogic.kernel.Kernel.execute(Kernel.java:338)
              > at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:304)
              > at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:923)
              > at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:844)
              > at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
              > at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
              > at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
              > at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:681)
              > at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:627)
              > at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:123)
              > at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
              > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
              > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              >
              

  • UnsyncCircularQueue$FullQ Queue exceed maximum capacity of: '65536' element

    dear friends:
    Does anyone knows the problem like this <BEA-002911> <WorkManager ClusterMessaging failed to schedule a request due to weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements
    weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements
    why this happend and how to solve it?
    thanks a lot!

    Hi,
    Weblogic has a maximum storage for Pending Request queue configured at 65536. At this point, it will stop accepting incoming request to your Server Socket port.
    This means that your Weblogic server / JVM very likely has depleted its internal Thread Pool triggering Weblogic to start queuing incoming requests; eventually reaching its maximum capacity.
    From a resolution perspective, you will need to investigate the root cause, Thread Dump generation and analysis will be required in your case.
    Please generate a JVM Thread Dump (kill -3 <pid> for UNIX OS) and share detail on Thread contention / problem pattern.
    Thanks.
    P-H
    http://javaeesupportpatterns.blogspot.com/

  • BEA-000802 : Queue exceed maximum capacity of: '65536' elements.

    Hi,
    I am getting following error in my weblogic server. Its version is 10.3.3.0
    And after some time, server is not showing its state. Usually if the server is running properly, its state is "OK". But after the following error messages, my server is not showing any state and applications are not running.
    ####<Nov 11, 2010 5:18:50 AM GMT+05:30> <Error> <Kernel> <APP1> <Server1> <[ACTIVE] ExecuteThread: '360' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1289432930650> <BEA-000802> <ExecuteRequest failed
    weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements.
    weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements
         at weblogic.utils.UnsyncCircularQueue$FullQueueException.<init>(UnsyncCircularQueue.java:147)
         at weblogic.utils.UnsyncCircularQueue$FullQueueException.<init>(UnsyncCircularQueue.java:144)
         at weblogic.utils.UnsyncCircularQueue.expandQueue(UnsyncCircularQueue.java:71)
         at weblogic.utils.UnsyncCircularQueue.put(UnsyncCircularQueue.java:94)
         at weblogic.rjvm.MsgAbbrevJVMConnection$WritingState.sendNow(MsgAbbrevJVMConnection.java:511)
         at weblogic.rjvm.MsgAbbrevJVMConnection.canSendMsg(MsgAbbrevJVMConnection.java)
         at weblogic.rjvm.MsgAbbrevJVMConnection.sendMsg(MsgAbbrevJVMConnection.java:181)
         at weblogic.rjvm.MsgAbbrevJVMConnection.sendMsg(MsgAbbrevJVMConnection.java:142)
         at weblogic.rjvm.ConnectionManager.sendMsg(ConnectionManager.java:593)
         at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:901)
         at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
         at weblogic.rjvm.MsgAbbrevOutputStream.sendOneWay(MsgAbbrevOutputStream.java:400)
         at weblogic.rjvm.BasicOutboundRequest.sendOneWay(BasicOutboundRequest.java:105)
         at weblogic.rmi.internal.BasicRemoteRef.sendOneway(BasicRemoteRef.java:271)
         at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:214)
         at weblogic.management.logging.DomainLogHandlerImpl_1033_WLStub.publishLogEntries(Unknown Source)
         at weblogic.logging.DomainLogBroadcasterClient$2.run(DomainLogBroadcasterClient.java:209)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    And even I am getting out of memory error warning.
    ####<Nov 11, 2010 7:34:46 AM GMT+05:30> <Critical> <Health> <APP1> <Server1> <weblogic.GCMonitor> <<anonymous>> <> <> <1289441086135> <BEA-310003> <Free memory in the server is 2,953,904 bytes. There is danger of OutOfMemoryError>
    My server arguments are
    -XX:PermSize=256m -XX:MaxPermSize=256m -Xms1024M -Xmx2048M
    Please tell me where the things are going wrong.

    This wls instance can't afford huge requests.
    See the following error
    ####<Nov 11, 2010 5:18:50 AM GMT+05:30> <Error> <Kernel> <APP1> <Server1> <[ACTIVE] ExecuteThread: '360' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>>
    This ExecuteThread number is 360th.
    I think your instance is already too busy.
    I guess OOME is second issue.
    If i have to solve this problem, i consider several follow things.
    1. Check the total requests.
         - I guess we need to sizing of wls instances.
    2. Extend wls instance count.
         - Under 100 ExecuteThread per wls instance
    3. Find long term requests, especially STUCK thread.
         - Tuning that requests under JTA timeout.
    4. Set the -Xms and -Xmx as same value.
         - For performance.
    I hope this will be helpful to you

  • Get an event of Memory Exceeded

    Hi Friends,
    I want two separate events of Memory Exceeding the limit.
    I have set a threshold on the HEAP and registered a NotificationEmitter
    When this threshold value exceed I get an event and i do the things desired
    But now the problem is I want to set two different Threshold values and want two separate events
    How can I do this
    I have tried the above process but it overrides the previous threshold value And I get only one event

    Just out of curiosity: what is your app doing? Why are you spending so much effort on memory management if you could as well spend some effort on, say, memeory usage optimization?

  • Can not update tab if its not the default sub-tab.

    Can not update tab if its not the default sub-tab.
    JDeveloper Version 10.1.2.1.0 (Build 1913)
    Hi. I have a problem with a “lovOpenWindowAction”
    The UIX is created with a master UIX and have several sub-tab that is included as UIX-pages.
    The lovOpenWindowAction lies in the included UIX-page
    The sub-tab I have a problem with has a table with users. Then I have a “Create New” button than I want to click on and select a new user that should be included in the table in the sub-tab.
    When I click on the button I open a LOV-window. Here I select the user that I want to add.
    In the LOV Action-class I save my new value in the database. Then in the method “onLovUpdate” I update the iterator with the new values from the database.
    But in my GUI the subtab is not updated until I click on it.
    But if I make the subtab the default subtab then it all works just fine and the GUI is updated directly.
    Here is the code for the tableAction in the subtab. This code lies in an included UIX-page. Target is the table id.
    <tableActions>
    <button text="Create New" id=" createNewRollperson" accessKey="N">
    <primaryClientAction>
    <lovOpenWindowAction destination="FiskeRollpersonerLOV.do"
    source=" createNewRollperson "
    targets="joinedRollpersfiskeer message"/>
    </primaryClientAction>
    </button>
    </tableActions>
    Here is some code from the master UIX-page
    <subTabLayout id="flikar">
    <subTabs>
    <subTabBar selectedIndex="${ui:defaulting(param.index,0)}">
    <contents>
    <link id="resorFlik" text="Resor"
    disabled="${sessionScope.fiske.id == null}"
    selected="${(param.source == 'resorFlik') or empty param.source}">
    <primaryClientAction>
    <firePartialAction event="changeTab" targets="flikar globalHeader">
    <parameters>
    <parameter key="source" value="resorFlik"/>
    </parameters>
    </firePartialAction>
    </primaryClientAction>
    </link>
    <link id="rollpersonerFlik" text="Rollpersoner"
    disabled="${sessionScope.fiske.id == null}"
    selected="${param.source == 'rollpersonerFlik'}">
    <primaryClientAction>
    <firePartialAction event="changeTab" targets="flikar globalHeader">
    <parameters>
    <parameter key="source" value="rollpersonerFlik"/>
    </parameters>
    </firePartialAction>
    </primaryClientAction>
    </link>
    </contents>
    </subTabBar>
    </subTabs>
    <contents>
    <switcher childName="${param.source}"
    defaultCase=”ResorFlik">
    <case name="resorFlik">
    <include node="${ctrl:parsePage(uix, 'includes/ResorFlik')}"/>
    </case>
    <case name="rollpersonerFlik">
    <include node="${ctrl:parsePage(uix, 'includes/FiskeRollpersonerFlik')}"/>
    </case>
    </switcher>
    </contents>
    </subTabLayout>
    What am I missing?? I can’t have this subtab as the default subtab! Please help me with a solution!

    hi,
    Change the condition type to manual entry.
    or
    for example delivery costs will be different at the time of PO and actual delivery costs then at the time of invoice we select planned delivery costs and settle them first with the actual delivery cost.
    Thanks & Regards,
    Kiran

  • Got my daughter an ipod touch 4th and it wont dothe back up from itunes? I bought my other daughter an iphone 4 and its doing the same thing. Both are locking up itunes too.

    Got my daughter an ipod touch 4th and it wont dothe back up from itunes? I bought my other daughter an iphone 4 and its doing the same thing. Both are locking up itunes too. I tried the deactivate/activate that was suggested it still didnt work. I took the ipod to a friend and hooked to her laptop and it synced fine but now trying to sync on mine it wont do it and it has the backup encryption on but no passwords will unlock it. itunes will reccognize the ipod and the iphone but while going thru the sync steps they both get to step 2 then lock up itunes and then says its syncing but will never stop. I am very frustrated and am regretting buying products from Apple.

    It seems to be a glitch or bug. Its been officially acknowledged and addressed by Apple. There is no resolution other than waiting for a few days.   The Kb article by Apple states it will fix itself on January 7.
    http://support.apple.com/kb/TS4510
    Symptoms
    After January 1st, 2013, Do Not Disturb mode stays on past its scheduled end time.
    Resolution
    Do Not Disturb scheduling feature will resume normal functionality after January 7, 2013. Before this date, you should manually turn the Do Not Disturb feature on or off.
    To turn off the scheduling feature, tap Settings > Notifications > Do Not Disturb and switch Scheduled to Off.

  • How to fire event to generate insert message for the child objects?

    We are in process to integrate CRM On Demand and existing Microsoft SQL DB.
    We have the following problem:
    For ex., we have CRM Object_1 that already synchronized with the SQL DB. CRM also has independent Object_2 and its child Object_2.1
    We dicided that we want to connect the Object_2 as child to the Object_1.
    The question is how to fire event to generate insert message for the Object_2 and Object_2.1?
    What is the best technique? Is it possible to do it by workflow configuration or it needs to be done programmatically?
    Thanks,
    Dmitry
    Edited by: 955827 on Aug 29, 2012 11:57 AM

    Hi,
    integration events can be generated only via worklow. You will need to create separate workflows for each record type (regardless if it is child or parent) because a workflow for the parent record type will not trigger when a child record is created/ associated. Also, the association workflows will trigger only when the specific event occurs.
    There is not way to generate the integrtaion events programatically. They are generated by workflows and are read/ interpreted by a code extension.

  • F110 - Pre-notification by E-Mail: How to change the sender address

    Hi experts,
    by executing pre-notifications in F110 an e-mail is generated. The sender e-mail address is set from sap user (master data) who has executed pre-notification. This is the current setting.
    Now the sender e-mail address has to be a static e-mail address not the address from user master data. Independent from user who is executing f110 there has to be the same (static) sender address.
    I tried to use business transaction events, 2040. So I copied the standard function modules, assigned them to the events and set some breakpoints in the function modules without any success.
    Additionally I executed F110 (pre-notification) in debugging mode and set dynamical breakpoints at the new created function modules - again without any success.
    Does anyone has an idea what's going wrong?
    Thanks in advance,
    Tan
    Message was edited by: Tan Yildiz
    In P/S-Modules i cannot select event 2040, message: entry not available in TBE01 - how can I get event 2040 selected?

    Thanks for the help and guidance.
    I ran that command
    [PS] C:\Windows\system32>Get-OrganizationConfig | fl MicrosoftExchangeRecipien*
    and it shows similar to the expected putput.
    We are migrating currently to 0365 so we have a cloud entry also but it looks the same.
    MicrosoftExchangeRecipientEmailAddresses            : {smtp:[email protected],
    smtp:MicrosoftExchange329e71ec88ae4615bbc36ab6ce41109e@domainclou                                                   
    d.mail.onmicrosoft.com, SMTP:MicrosoftExchange329e71ec88ae4615bbc                                                    
    [email protected], smtp:MicrosoftExchange329e71ec88ae4615bbc3                                                     
    [email protected], X400:C=US;A= ;P=ATS;O=COS;S=Micr                                                     
    osoftExchange329e71ec88ae4615bbc36ab;}
    MicrosoftExchangeRecipientReplyRecipient            :
    MicrosoftExchangeRecipientPrimarySmtpAddress        :
    [email protected]
    MicrosoftExchangeRecipientEmailAddressPolicyEnabled : True
    I am nervous about changing anything with the set-organizationconfig cmdlet so if there are other ideas I could try first please help.
    Thanks again
    Brian

  • KIMYONG: Outbound Workflow Notification Event Message 를 tracking하는 방법

    Purpose
    Outbound Workflow Notification Event Message 가 발송됐으나 user가 받아보지 못한경우 가 발생했으나 user
    이를 tracking하는 방법을 알아보고자 한다.
    Solution
    1. notification 이 발송될때 oracle.apps.wf.notification.send event발생한다
    event key 로 Notification ID 를 사용한다.
    2. 다음 조건에서만 The e-mail notification이 발송된다.
    i) Notification status is OPEN or CANCELED
    ii) Notification mail_status is MAIL or INVALID
    SELECT status, mail_status
    FROM wf_notifications
    WHERE notification_id = '&nid';
    iii) Recipient Role has a valid e-mail address and notification preference is in the format MAIL%
    SELECT email_address,
    nvl(WF_PREF.get_pref(name, 'MAILTYPE'),notification_preference)
    FROM wf_roles
    WHERE name = upper('&recipient_role');
    iv) Workflow Deferred Agent Listener is running
    v) Workflow Notification Mailer is running
    3. e-mail로 발송되기전 message가 2번 정지한다.
    Raised --> WF_DEFERRED Queue --> Processed by Deferred Agent Listener --> WF_NOTIFICATION_OUT Queue --> Processed by Notification Mailer and sent as e-mail
    4. oracle.apps.wf.notification.send을 dispatch 할때 error가 발생하면
    message 는WF_ERROR queue에 enqueue되고 .
    Error Agent Listener 가 WF_XML.Error_Rule 을 수행하는 oracle.apps.wf.notification.send 의
    ERROR subscription 을 dispatch합니다.
    5. notification id 와 WF_DEFERRED and WF_NOTIFICATION_OUT queue 의 message stauts 등을 확인하기 위해 $FND_TOP/sql/wfmlrdbg.sql 를 수행합니다.
    PROCESSED in WF_DEFERRED - The message is enqueued to WF_NOTIFICATION_OUT
    PROCESSED in WF_NOTIFICATION_OUT - The message is sent as e-mail
    READY in WF_DEFERRED - Check if Deferred Agent Listener is running
    READY in WF_NOTIFICATION_OUT - Check if Notification Mailer is running
    6. notification id 의 outbound XML message 를 분석합니다.
    . The wfmlrdbg.sql output provides the XML message generated by WF_XML.Generate at the time the script is run. If the original XML message used by the mailer is required to be analyzed following SQL may be used.
    SELECT tab.user_data.text_lob text_lob
    FROM applsys.aq$wf_notification_out tab
    WHERE dbms_lob.instr(tab.user_data.text_lob,'&1') > 0
    7. 필요하다면 WF_NOTIFICATION_OUT queue 를 rebuild 합니다.
    The wfntfqup.sql script rebuilds the WF_NOTIFICATION_OUT queue by dropping and recreating
    that queue, removing pending notification messages from the WF_DEFERRED queue, and
    repopulating the WF_NOTIFICATION_OUT queue from the Oracle Workflow Notification System
    tables.
    Wfntfqup.sql Version >=115.9
    If you have implemented Oracle Alert and the WF_NOTIFICATION_OUT queue contains any pending
    alert e-mail messages, those messages must be processed before the queue can be rebuilt. The
    wfntfqup.sql script checks the queue for any alert e-mail messages and, if it finds any, the
    script returns an error message that specifies how many alert e-mail messages are pending
    and indicates that these messages must be processed before the script can run.
    Wfntfqup.sql Version <= 115.8
    If you have implemented Oracle Alert and the WF_NOTIFICATION_OUT queue contains any pending
    alert e-mail messages, those messages must be processed before the queue can be rebuilt. The
    wfntfqup.sql script checks the queue for any alert e-mail messages and, if it finds any,
    exits without performing any changes.
    Stop Notification Mailer, rebuild Mailer Queue using $FND_TOP/patch/115/sql/wfntfqup.sql.
    Reference
    Note 433359.1

    Thanks for your update.
    I have checked as per the metalink doc "242941.1" . i am getting below message only for IMAP.
    *C:\prod\scripts>%AFJVAPRG% -classpath %AF_CLASSPATH% -Dprotocol=imap  -Ddbcfile=
    c:\prod\prodappl\fnd\11.5.0\secure\PROD_qlng-s-012\prod.dbc -Dserver=qlng-s-003.
    qalhatlng.int -Dport=995 -Dconnect_timeout=120 -Ddebug=Y -Daccount=oracle1@qlng
    .om -Dpassword=System123 -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer
    MLRTST : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.o
    ut until necessary parameters are retrieved for Logger to be properly started.
    DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.
    IMAPStore,Sun Microsystems, Inc]*
    Kindly suggest need to any setup in ms exchange server or firewall level.
    Thanks

Maybe you are looking for