Notification field selection

Hi,
I am looking to understand the way of defining field selection for notification.
I have arrived to the IMG activity in which I can, probably, customize the field selection but I could not find the simple way of doing it for notification type.
Could anyone give me a hint (or even more than that) where I can find the documentation of how to customize it?
Best regards
Shlomo

Hi shlomo
This is kalyan, IMG activity is the general settings for Notification, There you can select fields for Notification type.  you can not find Documentation for that as per the client requirement we have to drill down the IMG path.
I think it may help you
Regards
kalyan

Similar Messages

  • Influencing factor Plant for Notification Field selection.

    Dear Expert,
                     I want to make Malfunction Start Field to be display only (Not modifiable)Plant Specific.
    I am using same notiification Type for 2 Plants and so I want to Make Malfunction Start field non-modifiable for one plant and modifiable for Other.
                     For Notification Field selection there is Influencing Field as Notification Type but not Plant ( Maintenance or Planning).
                     How I can address this issue.
                     Please suggest any BADI if possible.
    With best regards,
    Narendra

    Hi shlomo
    This is kalyan, IMG activity is the general settings for Notification, There you can select fields for Notification type.  you can not find Documentation for that as per the client requirement we have to drill down the IMG path.
    I think it may help you
    Regards
    kalyan

  • Field Selection in Notification Location TAB.

    Hi gurus,
    I found setting of field selection for a Location tab of Notification in OIAZ.
    My problem is i need to make more than one field as mandatory.
    But when i try to make more than one the previosuly selected field status is changing to original.
    can anyone give ur valuable comments

    hi vijay,
    as you said you can make any no of field mandatory in OIAZ  i dont think there will be a problem ,i checked in my system its working fine, can you say which field you want to make mandatory.
    regards
    thyagarajan

  • Field selection for Notification type

    Hi all,
    I have a configured  a notification type. I want to hide unwanted fields . I checked for " Set Field Selection for Notifications" in spro but  i am not able to find these fields.
    The Fields are under below tabs
    location Data Tab
    1.Room-ILOA-MSGRP
    2.Plant section-ILOA-BEBER
    3.Business Area-ILOA-GSBER
    Please guide  how to hide  theses fields
    Anil Kumar

    Hi Anil
    I have not checked in SAP, butif the hiding of the fields in not possible through SPRO, then an easy way to hide fields is to use GUixT, which comes with std. SAP.
    Regards
    Manish Bansal

  • Some notification fields are not available at

    Hello,
    I am customizing PM notification/
    I tried to change field selection  of several notification fields.
    I have suceeded to change most of the fields But I fopund no way of changing field selection for some fields such as:
        ILOA-MSGRP (ROOM)
        ILOA-PROID (WBS ELEMENT)
    Ther are more fields.
    Does anyone know if there is a way to control these fields?
    Best regards
    Shlomo Assouline

    Hi,
    These Location and Account Assignment fields can be customized using transaction OIAZ. The customizing you make will affect notifications and orders. Use a influencing field (call program, order type, notification type) to restrict customizing to just notifications if that is what you want.
    -Paul

  • Field Selection for Maintenance Planing

    Hi Dear,
               I have done some field selection somewhere in SAP System.Now when I am creating Maintenance Item,Maintenance Plan,now I am getting Function Location field as Required.
    I don't remember where is the field selection for making the field Function location mandatory.
    Please suggest.I am also looking into it.
    Thanks and Regards,
    VJ

    Hi Narasimhan,
                           I got the field where the changes need to be done.In Notification reference screen I had set the Function Location as a mandatory field.
    Problem solved by me it self.
    Thanks for your Effort.
    Thanks and regards,
    VJ

  • IW42 - Overall Completion Confirmation - Field Selection

    I have what seems to be a common requirement, but as yet have not found a good solution to it in standard SAP!
    Following the creation of a profile for  transaction IW42 - Overall Completion Confirmation, which includes the screen areas for notification Items, Causes and Activities the user has a requirement to make the catalog codes mandatory.  The usual configuration settings in OIZN (Set field selection for completion confirmation) do not apply to these screen areas.
    I'd appreciate any suggestions as to the simplest method of achieving.
    Many thanks.

    Russ,
      I don't think it could be accomplished through configuration or through Transaction variants.
    I think the simplest way to accomplish this would be by using one of the below user exits according to your needs.
    CONFPM02: Customer-specific entry checks 1
    CONFPM03: Customer-specific check by operation selection
    CONFPM04: Customer-specific entry checks 2
    The other option would be to use the Implicit enhancement functionality(If you are in EC C6.0 or above)  to modify the table control field attributes dynamically.
    Regards
    Narasimhan

  • Field Selection error for movement type and G/L account

    I am currently experiencing a field selection error between movement type 601 and G/L account 7140000.  The problem field is 'Segment'.  This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
    However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
    Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
    Many Thanks

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

  • Signing: Empty list in "Field Selection" when picking fields to mark as read-only on signing

    I have a PDF form with some signature fields. I am attempting to mark some of the fields in the document as read-only when the document is signed. This is what I did:
    1. Modify the "Signed" properties of the signature field.
    2. Choose "Mark as read-only" and "Just these fields" in the drop down list beside this option.
    3. Click on the "Pick" button to select the fields to be marked read-only when the user signs this field.
    In the "Field Selection" dialog that comes up, nothing is shown in the list.
    Am I doing something wrong? Is there something I need to do to add fields to this list, or should it be populated automatically allowing me to choose what I want?
    I noticed this feature is only available for Acrobat 6.0 and later. The compatibility level for the document I created is 1.6 (Acrobat 7 and later). It is created in Acrobat X.
    Just figuring my way around these things. Did a google search for any solutions, but couldn't find anything on this.
    Any help would be greatly appreciated.
    Thanks,
    Ron

    Hi Ron,
    It certainly sounds like you are on the right track.What version of Acrobat are you using, is it Pro or Standard, Mac or Win? I see where you mentioned the file was created in Acrobat X, but I'm not sure that the app that create the PDF file is the same version as the one you are using for editing.
    Steve

  • Contract and release order for service: connection and field selection

    Hi Experts,
    I have some questions about contract and release order (PO against contarct) for services.
    A -I want ot know if there is any standar way to oblige the creation of a release order to a contract. I mean i had some users  that create a release order w/o reference to the contract and it works fine anyway. The document is a copy of the NB. I cant find the way to reference the 2 purchase document clearly.
    B - Using a release order, when copying the item from contract catalogue by clicking the service selection icon,  description and net price are correctly copied:  the description is not modifiable  but the net price can be change by the user. Can some body explain me where to modify this setting? where is the field selection and where in SPRO step by step please,
    thanks in advance
    Livio

    ... Nobody is so nice to suggest me any solution?  
    For the point A probably the only way is user-exit.... but for B i don't have any idea, please let me know
    thanks
    Livio

  • Field selection for mvt type 544/acct 423001differs

    Hi Guru's
    Scenario
    In Subcontracting
    while doing reverse of Goods receipt this error is occuring.
    Can anybody help me.
    Rgds
    Ana.
    Edited by: ana kamat on Dec 20, 2008 8:21 AM

    Hello
    In SE38 run  RM07CUFA
    System will shopw for whcih field there is incompetability.
    Then goto OBC4 for G/L field selection and OMJJ for movement type field selection.
    Both the field selectons should be compatable.(ie a field which is display for movemeent type shouldn't be requreid entry for G/L. likewise)
    Regards

  • How do I resolve: Field Selection dialog [Pick... button] in "Mark as read-only" section of Signed tab for Digital Signature field is not working

    I am using Acrobat Pro X on Windows 7 Enterprise x64 to create a form. When I have a simple form with a few fields, I am able to use the "Pick..." button to select the fields I want to select, but in a more complex form (20 fields with 3 Signature fields) The Field Selection dialog does not work. I can make the selections, but they are not saved. Removing fields does not resolve issue. IF I start with a blank form and add a few fields, the dialog will work, but after adding more, it quits working. Reader XI is also installed.

    And that is why many responders use only the custom JavaScript calculation option.
    The UI for the select fields and simplified field nations are only a way to pass field names to a JavaScript function that performs the actual calculation. Sometimes these functions call other functions and pass the parameters can lead to errors in the attempted code.
    I would start to learn code JavaScript for Acrobat.
    The pick field dialog is for performing calculations involving sums, products, averages, minimum, and maximum. I am not sure how that would work with a digital signature. Once a signature is applied the form fields could be locked.

  • Free PO indicator in field selection key/group

    Hi all,
    I would like to make Free PO indicator as mandatory field in PO thru specific document type field selection reference key. When I search for the field, it is not available for existing field selection key (Field selection group).
    How can I add the Free PO indicator into this field selection key/group or Does it represented in different name.
    Kindly clarify.
    With regards
    Suddy

    Hi,
    "Free Indicator" doesn't exist in field selection. If you wanto to have Free Indicator ON for a specific PO Document Type then you need to do ABAP Development for this.
    Use BAdi --> ME_PROCESS_PO_CUST
    Interface --> PROCESS_ITEM (Processing of Item Data)
    Below is the Sample Code for your reference;
    If w_bsart EQ 'ZPOD'.
        wa_item3-repos = ' '.
      ELSE.
      ENDIF.

  • Field selection for movement type 601 account 894025 differs for cutomer

    While posting goods after saving delivery merror message
    Field selection for movement type 601/aact 894025 differs for customer goods movement
    I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601  KONTO  Optional field
    Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
    I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
    Please provide your valued inputs why this is happening?
    Thanks for your time.
    Rajiv

    Hi Raja,
    Thanks for prompt reply.
    I shall appreciate if you elaborate how to check
    check the Field selection goup in control tab for that GL 
    I tried OBC$--> (Is this correct?)
    I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
    Profit center, cost object are  in G004 as supressed field.
    So should I make optional? So thing will work.
    Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
    Thanks for yr time.
    Rajiv

  • FIELD SELECTION FOR MOVEMENT TYPE AND ACCOUNT

    Hi,
           I am trying to do the Post Goods Issue (PGI).
    But, the system is throwing an error as mentioned below.
    Field Selection for Movement Type 901 / Account 4070000001 differs for Customer Goods Movement (015)
    I made the Cost Center as Required Entry. But, there was no effect on the PGI.
    I could not make out the exact error.
    Please guide me properly in this regard and do the needful.
    Thanks in advance.
    Thanks & Regards,
    Srinivasa M.S
    +91-9910077829

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

Maybe you are looking for