Notification for Partner creation after Supplier pre screening

Hi,
Is there any statndard notification sent when a business partner is created with the Role Vendor or Bidder after Pre-screening suppliers registered through SUS?
Thanks,
Sivagami.R

Hi
I have not tried this. I guess, Yes, ideally a notification should be sent.
Refer report - RBBP_NOTIFICATION_OFFAPP (Forward work items to other mail clients)Also See Offline Approval!http://help.sap.com/saphelp_srm50/helpdata/en/31/ec423b4ac8d506e10000000a11402f/frameset.htm
Refer to this link as well.
http://help.sap.com/saphelp_srm50/helpdata/en/c0/7a0859ee91d54aa48a69fb5d2c4089/frameset.htm
Regards
- Atul

Similar Messages

Authorisation Object in Order & Notification for Partner

Dear All,
Does Maintenance Order or Notification has an Authorisation Object which has Partner as an Authorisation field?
My requirement is to restrict the view & Change Authorisation based on the Partner assigned in the Notification & Order.
Regards,
MLN Prasad

Hi Prasad
One suggetion, Why you are not using the field user responsible for that? Are you give SAP login ID to each service provider to access the SAP from SAP netware? Then Provide him access to IW38 & IW28 & make the partner function USer responsible & make the field requirred field.
While access the report , system will ask the user responsible field to service provid er & service provider will give his user ID & he will get the data for his id only.
I hope this may help you.
regards

Service entry sheet (Confirmation for service) creation by supplier

Service procurement MM-SUS.
For processing service orders(no hirarcies, only one service line)
I Have transfered the service Purchase order from ECC
to SUS(SRM7.0).i am able to see the purchase order
and POR created and transfered to ECC. Further confirmations
for Creating SES in ECC,how?
i have tried with create confirmations in start page of SUS.
but service POs are not available.what are the settings required in SUS (for service confirmation) to create SES in ECC.
with screen shots is more helpful.
regds
Rami

Hi Nikhil,
thanks for your Feedback.
we are not using EHP4. our ERP system is ECC6.0 only. I know EHP4 is required at ECC side. But in this stage
we are going with ECC6.0.with Custom developments. I think modifications are required in the Interfaces and at ECC side.
as SRM is already upgraded to SRM7.0.I think no custom developments needed at SRM side.only the service orders requests
from ECC to PI and PI to SRM needs to be modified?
scenario name : ECC triggers Idoc to PI and PI generarate XML to SUS (Orders02 to Purchase order request).
i have checked the Idoc and all fields required for creating service order in SUS is available.is any other fields/check box required in Purchase order Idoc. so that we can map.
in service purchase order Item detail screen(service lines) is not displaying in SUS side and also confirmation(SES creation).
regds
Rami

Notification for Item creation

Hi,
Is there any setup to send notification send to a group of people when an item got created in Item master?
Thanks
Gowrishankar

Thanks Prakash and Kashif. Alert and Business Event are two ways to invoke notifications in this scenario.
I have noticed that Item planner receive WF notification when ever a requisition got created for the item. Is there any inbuilt notificcation which can be invoked during item creation?
Thanks
Gowrishankar
Edited by: Gowrishankar on Dec 7, 2011 11:48 AM

Is there a way to have notifications for messages/whatsapp in the lock screen without showing the identity of the sender?

Is there a way to show banners (in the lock screen) to notify of a new message withough showing the name of the sender, as for business purposes this can sometimes be confidential? Ie. I want it to just say for example 'whatsapp message', rather than 'whatsapp message from XX'.

Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H

Supplier pre-screening -- SUS

Hello all,
I am working on Supplier self registration. I am using SUS as my registration system and trying to transfer vendors to my SRM system.
Currently the vendor is able to fill up the questionnaire and send it successfully.
However when the strategic purchaser logs in to the SRM system and clicks on PRESCREEN suppliers, he is not able to view any vendor who had submitted the questionnaire.Also only 1 button i.e. ACCEPT is visible. Why is this happening?
I have done all the configurations as per the SAP documentation. I have maintained supplier directory settings , PFCG settings , created a service user for ros_self_reg, etc.
Pl guide me as to how to resolve this issue.
Thanks,
Nikhil
Edited by: Pbponikhil on Mar 18, 2010 8:25 AM
Edited by: Pbponikhil on Mar 18, 2010 8:27 AM

Hello Nikhil,
In my case, the supplier receives the questionnaire and he fills up an receives a confirmation message. I dont have an idea of where would i be able to receive the answered questionnaire and then accept or reject the supplier. Please help, where would i be able to view thw questionnaire. Would i be able to view the questionnaire if i integrate the portal and bsp application for prescreener. what would be the role that i give to the Purchaser in portal.
Thank you.
Saurav

Trigger for invoice creation after POD Entry

Hi,
Is anyone familiar with the process surrounding POD? In BW, I am trying to extract to the POD time & date, but it looks as if thats impossible as it only sits in the change header. AEDAT holds the date, but AEDAT cannot be relied on as the only date of change....
Therefore, when a POD is entered, does it in turn launch a 601 goods movement or otherwise, or some other kind of event that would be equal to the POD date?
thanks
Ian

If want immediatly after completion POD billing document or any other requirement.If you want to trigger billing document automatically then set up Billing batch job every hour then system checks delivery due documents then it will do POD.

PM Notification contains functional location after dismantling

Dear Gentlemen,
We are facing the following problem.
An equipment is installed on a functional location.
A maintenance notification is created for the equipment.
The maintenance notification automatically takes on the functional
location number.
Now an order is created for the functional location that does NOT refer
to the notification mentioned. With a reservation referring to the orderthe equipment is dismantled from the functional location with transaction
IE4N.
The equipment is now in stock and no longer installed on the functional
location. However, the original notification still refers to the
functional location.
When we execute transaction IW28 (overview of notifications for the
functional location) the notification is still displayed in spite of thefact that the notification is for the equipment that does not belong to
the functional location anymore.
Is there a way to remove the functional location automatically from the
notification for the equipment after the dismantling operation has takenplace?
Thanks a lot and best regards
Pierre Peeters
Steps for Reconstruction
1) Equipment installed on functional location
2) Transaction IW21 to create a notification for the equipment
3) Notification contains the functional location
4) Transaction IW31 to create an order the functional location
5) Enter the material of the equipment as a reservation
6) Release the order with transaction IW32
7) Transaction IE4N to dismantle the equipment from the functional
location with reference to the reservation from the order
8) Transaction IW28 to display all notifications for the functional
lcoation. The notification is still displayed but the equipment is no
longer installed on the functional location!

Hi Pierre,
The Procedure followed by SAP is to maintain the state of equipments during creation of the notification. The process in the notification is before dismantling of the equipment so standard process says you should complete the noitification rather than changing the equipment in the notification.
Now for better explanation, can you just specify for what case the notification is created? And what is the problem if the functional location is not removed?
Regards,
Chin2

Creation of supply chain unit

hi all,
i am doing the configuration part of integration of sap erp with sap ewm.in this while maintaining the supply chain unit in transaction/scmb/scumain. i am unable to create the supply chain unit ,the system is showing invalid transfer parameters.what is the reason for this where i have to maintain the settings for the creation of supply chain unit.
The error message is
Invalid transfer parameter(s)
Message no. /SCMB/SCU007
kindly guide me
Regards,
Velu

no one has answered , i am closing my question

FSCM-COL Business Partner Creation for Existing Customers

Experts-
After using MDS_LOAD_COCKPIT to create the initial load of Business Partners, there are a few Customers which are still missing Business Partners. Automatic Creation of Business Partners is set up and fully functioning for any new Customers created, however when attempting to use MDS_LOAD_COCKPIT for the existing Customers which are missing Business Partners the error message 'No transfer of interval for object BU_PARTNER' (Message no. NR028) is received.
If the Automatic Creation of Business Partners is working correctly at the time of Customer Master creation, what would prevent the Business Partner from being created after the Customer already exists?
Please let me know if further clarification is needed on what is outlined above.
Thanks and Regards,
Corey

In case someone runs into a similar issue in the future, the resolution to this issue is provided below:
In the case I've highlighted the customer had been created, yet the Business Partner failed to be created in the Automatic Business Partner Creation functionality initially due to a missed Tax Number Category configuration. Once this configuration was complete the BP still failed to create via XD02 or MDS_LOAD_COCKPIT. MDS_PPO2 gave the initial error message as 'Business partner ##1 does not exist' (Message no. R1201).
Although the Customer to BP synchronization setting were set up for an external number range, the presence of contact persons in the Customer Master record were causing SAP to look for grouping data. Since no grouping data was present SAP was attempting to create BPs contact persons using the internal number range, which was already set at its limit.
By removing the contact persons from the customer master via XD02 and then re-executing the MDS_LOAD_COCKPIT, the requested Business Partner was created. After that the contact persons were then re-maintained in the customer master.

IHC errors valid clearing partner not found and no header details found while idoc creation after f110

IHC errors :valid clearing partner not found and no header details found while idoc creation after f110
Please let me know where the config is missing for ihc automatic payment program.in we02 status is not 53.
Please help

Hi
Please share the error message in the IDOC.
If the error message is IHC204 "No valid clearing partner was found", it may be due to the missing correct configuration in Set Up Creation of Payment Requests for Inbound IDoc in FI, which links the clearing partner, ALE logical system partner type and IHC account number.
Cheers
taro

Why won't my push notifications for the app snapchat work after yesterday's iOS update?

After yesterday's update the app snapchat won't send me push notifications anymore

Hello Nhuphham,
It sounds like you are not receiving your Snapchat notifications on your iPhone. I found an article with steps that might help with this:
Additional Information
If you have an app that could send frequent notifications (for example, Mail with high-traffic email accounts, Twitter apps, and so on), your iOS device could wake frequently to display the notification (and affect battery life). You can disable "View in Lock Screen" for a particular app in Settings > Notifications > <app name>.
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection. If you are not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app at least once to begin receiving notifications.
If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notifications to ensure that the app is configured for notifications.
If notifications do not appear only in the Notification Center, verify that the Notification Center setting for the app is enabled.
If you are still unable to receive notifications and you are using a Wi-Fi connection, verify that the network or firewall is not blocking access to port 5223.
You can find the full article here:
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
If you are still not receiving the notifications for Snapchat after following those steps, I recommend continuing with the steps in the following article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can you re-show push notifications for messages after unlocking iPhone?

Is it possible to re-show push notifications for messages after unlocking an iPhone? If I open my phone, but want to re-see the same message push notifications after closing my phone would that be possible? In other words is there a way to customize a lock screen or to restore it?

Confirmed. I did upgrade my phone and then "restore from backup" rather than setting up a new phone.
Would setting up as a new phone delete my extra carrier profiles, or are these untouched? I could try that as well.

How to Change URL of BPA after clicking on Open Document in PO Notification for India Localization?

In the Purchase Order Approval workflow notification , there are two links at the bottom of page under heading REFERENCES,
- view PDF
- open document
So when we click on open document, the Oracle Forms loads and purchase order screen will appear in the screen.
In case of India localization, for standard PO the India local screen opens, where we can see the taxes by clicking on Taxes Button.
But in case of blanket purchase agreements, when we click on open document link from the notification,we are routed to the application with the screen of global purchase order, instead it
should go to Purchase Orders(Localization).
We want to move to the India local po screen for BPA.
So please let me know, where I can change the URL for Blanket Purchase Agreements.
Regards
Sandeep

Hi kalyani,
Please check my inbound plug code...tell me what changes wee need to do and where wee need to add this code...once again thanks for your reply..
METHOD
ip_inboundplug.
**CALL METHOD SUPER->IP_INBOUNDPLUG
** EXPORTING
** iv_collection = iv_collection.
DATA: lt_ivr_url_param TYPE tihttpnvp,
ls_ivr_url_param TYPE ihttpnvp,
lr_searchcustomer TYPE REF TO if_bol_bo_property_access,
ls_searchcustomer TYPE crmt_bupa_il_header_search.
CALL METHOD cl_crm_ui_session_manager=>get_initial_form_fields
CHANGING
cv_fields = lt_ivr_url_param.
lr_searchcustomer ?= me->typed_context->searchcustomer->collection_wrapper->get_current( ).
CHECK lr_searchcustomer IS BOUND.
READ TABLE lt_ivr_url_param INTO ls_ivr_url_param WITH KEY name = 'sap-phoneno'. "'sap-phoneno'.
IF ls_ivr_url_param-value IS NOT INITIAL.
ls_searchcustomer-telephone = ls_ivr_url_param-value.
CALL METHOD lr_searchcustomer->set_properties( EXPORTING is_attributes = ls_searchcustomer ).
eh_onsearch( ).
ENDIF.
ENDMETHOD

In my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to S

in my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to Sort out the Problem?

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

Notification for Partner creation after Supplier pre screening

Similar Messages

Maybe you are looking for