Notification in CE 7.2 SP04

Hi All,
I am using Notification & want to send niotification for some users in CC. But in Notification i can able to see only To & Mail (Subject & Message). Is there any way to have cc in notification flow object?
Pls help me.
Regards,
Arun.

Hi arunganesan,
U can also enable Email notification for each and every Process flow. Kindly Refer the following Link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd5f0c-74ab-2c10-f79e-98d7869db972?QuickLink=index&overridelayout=true.

Similar Messages

Work Manager 6.0 Push Notification not working

Hi All,
I have configured Standard Work Manager 6.0 application and now I am trying to configure Work Manager 6.0 Push Notification.
I have completed all Post Installation(optional and required) which are mentioned in Standard product document.
I am getting new work order entries in /SYCLO/PSH01 and /SYCLO/PSH02. After that Agentry server is also calling /SYCLO/PM_DOPUSHWORKORDER_GET Function Module and /SMERP/CL_PM_PUSHWORKORDER_DO Class Handler.
I am getting result in final export table(ls_mdo_output_vals) of /SMERP/CL_PM_PUSHWORKORDER_DO.
My problem is still I am neither getting this work order into ATE nor push notification message.
When I went to Syclo Admin panel, status of the push notification is also NEW.
I have configured 8282 port in [HTTPXML-2] section of Agentry,ini and Syclo Config panel outbound trigger.
Kindly let me know what can be an issue?
Regards,
Mohit Verma.
Message was edited by: Michael Appleby

Mohit,
I noticed the following in your Backend-Java.log.
~~~~~~~~error 1~~~~~~~~
2014/06/27 17:37:36.947: Error in initializing the StepHandler from the ini file or SAP configurations (com.syclo.sap.component.serviceorder.stephandler.ServiceOrderRemovePushStepHandler). Please check the JavaBE.ini file. java.lang.ClassNotFoundException: com.syclo.sap.component.serviceorder.stephandler.ServiceOrderRemovePushStepHandler
~~~~~~~~end~~~~~~~~~
<-- Make sure this is corrected. For some reason your java code is not being detected during start up. Check your Java folder in the root directory of your Work Manager 6.0 to see if it can be seen.
Based on history of Support tickets the following SAP Note is mandatory to make Push work:
1. Do mandatory SAP Note: 1954444
2. Please review: 1828657 - Release strategy for the ABAP add-ons SMFND, SMERP, SMISU, and SMCRM (Make sure you installed the correct add-on - look at the spelling in detail)
3. SCN Push threads that may help: http://scn.sap.com/thread/3494003
See if any of the comment above will work for you.
4. After you tried the above and it didn't work for you to try the latest SMP 2.3 SP04 version and let us know. This is for what I can see on the logs.
~~~~~~~~Error 2: Backend-java log~~~~~~~~~
2014/06/27 17:40:35.471:             Getting Java results in the the 'WorkOrderPushForEventSteplet' step (java class com/syclo/sap/component/workorder/steplet/WorkOrderPushForEventSteplet)
2014/06/27 17:40:35.471:             : 1 lines, 0 non-printing characters, 20 total characters
The module is 'PM'
2014/06/27 17:40:35.471:             The root object is 'WorkOrder'
2014/06/27 17:40:35.471:             Trying to read results by calling getReturnData()
2014/06/27 17:40:35.471:             : 1 lines, 0 non-printing characters, 81 total characters
getReturnData() method returned null, falling back to reading _returnData field
2014/06/27 17:40:35.471:             Processing public field _returnData: Ljava/lang/Object;
2014/06/27 17:40:35.471:             _returnData is a single object: 'Ljava/lang/Object;'
2014/06/27 17:40:35.472:             Mapping public fields of Java Class 'java/lang/Object' to Agentry object 'WorkOrder'
2014/06/27 17:40:35.472:             No public field userid found in java/lang/Object for user ID, and not in per-user mode: cannot determine user for data.
~~~~~~~~~end~~~~~~~~~~~~~~~~~~
The log comment above is stating that the push is trying to be sent to the PDA/handheld but it does not know where to send it to. This is proven from your backend setup and when you have no errors in your push retry.
The last line above is still a mystery to me as there are lots of upgrades with patches and SMP 2.3 SP# and with the userid is not found (especially when it states it is not in per-user mode: cannot determine user for data) then the Agentry Server cannot determine where to send the push to.   Hopefully somebody in this thread knows this.
Regards,
Mark Pe
SAP Senior Support Engineer (Mobility)

MDM 5.5 SP04 and SP05

Hi
Can anyone help me to get the comparison study between SP04 and SP05?
Thanks in Advance
Mehul Shah

in SP05 enhancement security is available like user restriction, repository level security password while mounting and unmountinh repository uploading of speed for clfmas and matmas data qulified table validation automatic workflow triggered with assignment like default value for perticuler field enhance search facility and
Improved MDM Console Security
o A login per repository is required. This allows you to restrict the authorization in MDM
Console to:
&#56256;&#56451; Change administrative settings
&#56256;&#56451; Perform data modeling maintenance
&#56256;&#56451; Execute schema migration tasksImproved MDM Console Security
- A login per repository is required. This allows you to restrict the authorization in &#56256;&#56451; Change administrative settings
&#56256;&#56451; Perform data modeling maintenance
&#56256;&#56451; Execute schema migration tasks
The MDM import performance was improved.
o The virtual match class field was extended (to detect if a record was created or
changed during an import, for example).
o During an import, filtering can be used to filter records in the source and in the
destination table.
MDM Syndicator/ MDM Syndication Server
o The syndication performance was improved.
o Automated syndication can be configured per port:
&#56256;&#56451; No automatic syndication
&#56256;&#56451; Continuously/direct (on change)
&#56256;&#56451; Scheduled (automatic)
o The new workflow step Syndicate is provided.
MDM Data Manager
o With the improved stemming engine, a multilingual sound like search and a search for
word roots (such as conjugated verbs) is possible.
o The search for measurements in the keyword search field is possible.
o You can save search criteria in named searches.
MDM Data Manager
o With the improved stemming engine, a multilingual sound like search and a search for
word roots (such as conjugated verbs) is possible.
o The search for measurements in the keyword search field is possible.
o You can save search criteria in named searches. Named searches can be reused by
any user who logs on to the repository.
MDM Workflow
o The Next Step function of the MDM Workflow is supported in the portal.
o You can assign LDAP users to workflow steps.
o Two automatic steps can now be executed one after the other (back-to-back).
o You can define dynamic texts in workflow notifications (such as the repository name).
o The new workflow step Syndicate is provided.

Timeouts and "cancelled" notifications...

Greetings,
We are using the standard (unmodified) version of the iExpense workflows (11.5.5 on Windows, WF 2.6.1), and have a curious and annoying problem...
1. User submits expense report
2. "Approval Request" notification times-out (after 5 days)
3. "No Response" e-mail notification sent back to original user.
4. "No Response" notification times-out (after 7 days)
5. NEW "No Response" e-mail notification generated, and sent to original user.
6. OLD "No Response" notification cancelled automatically.
7. "CANCELLED: No Response" e-mail notification immediately sent to original user.
8. Same pair of notifications generated one week later (new "No Response", plus "CANCELLED: No Response" notification referring the previous week's notification), and again a week after that, and so on...
This is maddening to our users who miss the first message, because (after that first week), they are getting PAIRS of messages every week (only seconds apart) that seem to say to them...
Message #1: Hey, there's a problem!!
Message #2: Oh, never mind, no problem at all.
Has anyone else encountered this problem? How did you handle it? Any ideas?
Thanks a bunch!! -- Tom
[email protected]

Hm. I've confirmed 2396373 is the patch number. Here are the steps I used to locate the patch on MetaLink:
1) Click the Patches button on the MetaLink navigation menu.
2) In the Patch Download page, enter 2396373 in the Patch Number field.
3) Click Submit. This should display the platforms where the patch is available.
Could you try one more time with these steps and see if you can access it this way?
Regards,
Clara
Thanks for the feedback.
I searched MetaLink for both the specific patch number you gave, and also the phrase (description) you gave - with no results on either search. (???) Is this patch only visible by requesting it with a TAR, or by some other means?
Please clarify, or double-check the patch number. Thanks a bunch!! -- Tom

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

Alert or Notification for Client Open and Close

Hi All,
How to configure an Alert or Notification, if the Client (SCC4 and SE06) is open and in modifiable state, we have spoken to our solman team and got the confirmation that there is no MT Class for SCC4 and SE06.
If this is possible through any z program, please do help and provide your comments and suggestions.
Thanks & Regards
Praveen

It is possible to assign a different posting period variant to company code in a non-leading ledgers (the extreme right field) in the foll. node in SPRO.
Financial Accounting (New) -> Financial Accounting Global Settings (New) -> Ledgers -> Ledger -> Define and Activate Non-Leading Ledgers

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

http://support.apple.com/kb/TS3281

Facebook Notifications and email notifications on ...

Hi
Is that possible Facebook Notifications and email notifications on sleeping screen nokia 808 like it had on N9..
On my 808 it shows only msgs and miscalls....any fix??
Thanks

not possible unless the app supports that behaviour. but email notifications and on notification lights has been broken on Symbian for a while, and as Symbian is in maintenance mode, is unlikely to see a fix, possibly ever.

Ios7 and push notifications and music

this update is really starting to annoy me now.
everytime i go on texts/whatsapp/kik/ anything it tells me to connect my phone to itunes to use push notifications.. so i connected to itunes and got load of songs i didnt want on my phone and no push notifications.
i have no idea how to delete the songs cause swiping accross doesnt work and clicking it just makes it play.. so help ??
and how do i get my push notifications to work?! its driving me crazy
i dont really wanna throw my phone at the wall but i can see it happening.....
tia...

https://discussions.apple.com/message/23019531#23019531
Lots of people (myself included) are having similar issues.

Subscriptions and email notifications

Is there a way to subscribe simply to a single question I post rather than to the entire topic, which results in tons of emails? Or is there a way (as with Mozilla forums) to be notified when a response is made to a thread I post?

Something seems to be broken in discussion subscriptions. Every morning I get a notification that the same thread has been updated, but it has not. Let me paste in a portion of the messages. Please note the dates are different but the link remains the same (with the same messageID):
====
The following updates have been made since 1/11/07 6:19 AM
Topic "No System Sounds" has been updated one time
http://discussions.apple.com/thread.jspa?messageID=3866231#3866231
====
The following updates have been made since 1/10/07 6:19 AM
Topic "No System Sounds" has been updated one time
http://discussions.apple.com/thread.jspa?messageID=3866231#3866231
====
The following updates have been made since 1/9/07 6:19 AM
Topic "No System Sounds" has been updated one time
http://discussions.apple.com/thread.jspa?messageID=3866231#3866231
PowerMac G3 (Blue & White), iBook G3, MacBook Pro Mac OS X (10.4.8)

CWMS and email notifications

We are in the planning stages for deploying cwms. In documentation, the various email templates are described briefly.
Is there further resource on the templates? For example, what is customer modifiable? How are we limited - only certain sections of the MSG, can we incorporate simple graphics, is there a character count limit? Are there any examples of the templates available?
Thank you for any info in advance.
John Geyer
Sent from Cisco Technical Support iPhone App

Hi John,
Essentially everything in the template is modifiable, and while there may be a character count limit, it is unlikely that any modifications will encounter that as notifications with hundreds of full lines of html and text can be delivered by the system.
There are two types of templates, one for normal web scheduling that can be in either HTML or plain text, and one for meetings scheduled through productivity tools that only uses a plain text notification.
Here is an example of a HTML notification that attendees receive:
Hi %AttendeeName_HTML%,
%HostName_HTML% is inviting you to this WebEx meeting:
%Topic_HTML%
Host: %HostName_HTML%
When it's time, join the meeting from here:
Join the meeting
When: %MeetingDateOrRecurrence%, %MeetingTime%, %TimeZone%.
Access Information
Meeting Number:
%MeetingNumber%
Password:
%MeetingPassword_HTML%
Audio Connection
%TeleconferencingInfo_HTML%
Delivering the power of collaboration
The %SiteURL_HTML% team %Support_HTML%
%CustomFooterText_HTML%
© %Year% Cisco and/or its affiliates. All rights reserved.
While the plain text version that PT would send looks like this:
%Topic%
Host: %HostName%
When it's time, join the meeting from here:
%Meeting Link%
Access Information
Meeting Number:
%Meeting Number%
Password:
%Meeting Password%
Audio Connection
%TeleconferencingInfo%
Delivering the power of collaboration
The %SiteURL% team
%Support%
%CustomFooterText%
In the HTML version, images can be linked to and added to the notifications with normal HTML tags. There are also system variables such as %Meeting Password% and %SiteURL% that are filled in at the time the notification is generated. While many of them are self-explanitory, a comprehensive list of the variables and descriptions are not available. I'll see if this can be included into the notifications section of the Administration Guide.
Thanks,
Derek Johnson
Conferencing TAC

Smartband and Google+ notifications

Hi There,
just received my Z2 with bundled smartband yesterday - loving it so far!
I only wonder if notifications for google+ will be added to the apps list, as this would make the smartband my perfect companion.
Thanks for your answer!
kind regards,
Alex

I just realised that you can tap into notification and get more settings.
By the way, Google + is there in the list:
Xperia Z1 C6903 - 4.4.2 [ SmartWatch SW2 | SmartBand SWR10 ]

Keynote and Tweetdeck notifications

I would like a twitter feed to appear during my keynote presentations. I've tried tweetdeck, but the notifications do not appear in front of the presentation (when in slideshow mode). Is there a way to force the notifications to appear on top? Incidently they do appear on top with powerpoint.
Cheers

Users can obtain the iWorks and iLife applications free, if they purchased a Mac after the beginning of October 2013.
Older Mac purchases require a paid purchase of these applications.

8830 and Email Notifications

Does anyone know of a way to shut off the email message indicator and the new mail (with star indicator) w/o affecting the email push? Ie: When I get home at night, I don't want to see how many messages I have or even the indicator that there is new messages because I feel compelled to look at it. I have tried turning both off, but you either have one showing or the other.
Thanks.

Hey emma53,
Welcome to the forums !
Are you still having this issue? If so then you may to try to back up and complete a clean reload of the device software as shown here http://bbry.lv/cG8oer. Before you restore your data test to see if the notifications are back.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

PO and Requisition Notifications

Using standard functionality in R12,
1. When purchasing buyer returns the requisition with a reason, can the requestor, req approver be notified via email about this? How?
2. Let say, the PO approver (someone from finance dept) rejects the PO due to lack of funds, the buyer will be notified via the workflow and he cancels the PO. What can the buyer do to notify this to the requestor and req approver(manager)? What happens to the requisition as the PO was already created in this case but cancelled?

1. If a req. is returned, Oracle sends a notification to the preparer. If you need to expand this to include requestor or approver, you will have to write an alert.
2. If a po gets rejected and was never approved, you can NOT cancel it. You have to delete it. (I am assuming that the "archive upon" option is set to approval)
When a buyer deletes a PO, the req. goes back to the autocreate pool.
When a buyer cancels a PO, he/she has a choice to cancel the underlying requisition. You will notice that there is a checkbox called "Cancel Requisition" on the Cancel PO window. If the box is unchecked, the requisition returns to the autocreate pool. If the box is checked, the requisition gets canceled. You may have to write an alert or modify the workflow to send a notification out if you want someone (e.g the approver) to be notified.
Hope this helps,
Sandeep Gandhi

Notification in CE 7.2 SP04

Similar Messages

Maybe you are looking for