Notification Mailers Replicated with same Notification ID

Hi All,
I have PROD issue.
The Notification Mails are getting replicated hundreds of times with the same notification ID.
What could be the possible reasons?
Thanks,
Sombit.

Pl elaborate on your issue, along with full versions of OS, database and EBS.
Srini

Similar Messages

  • CUOM 2.3 sends multiple notifications for Event StoppedGSUPerformancePolling with same time stamps

    Hi Alll,
    I have a CUOM Version 2.3 which shows mutiple notifications per Device for Event StoppedGSUPerformancePolling with same time stamps. The message below is generated from the default All_Events for all devices.
    Does anyone have a solution for that.
    Regards Michael
    This message is generated 8 times with the same time stamp in all messages.
    ** This message is generated from Cisco Unified Operations Manager **
    ALERT ID                = 00012OW
    CREATION TIME           = Sat 30-Oct-2010 16:31:57 CEST
    MODIFIED TIME           = Sat 30-Oct-2010 17:00:58 CEST
    STATUS                  = Active
    SEVERITY                = Critical
    MANAGED OBJECT          = 183.201.141.193
    MANAGED OBJECT TYPE     = VoiceGateway
    ASSOCIATED EVENTS       =
        Cleared:183.201.141.193:Unresponsive
        Active:183.201.141.193:StoppedGsuPerformancePolling
    CUSTOMER IDENTIFICATION = Voice Port
    CUSTOMER REVISION       = Voice Port

    if you get SNMP timeout on multiple devices then the fault usually lies in the path that the polling follows to get to these devices and back to the server.
    The problem obviously lies in the part path they have in common.
    It is not unusual to see the highest backbone loads during the night, due to backups being taken.
    Make sure the most important inter-switch links have no errors.
    I would rather fix this then turn off alerting.
    Cheers,
    Michel

  • PO Approval  to multiple person with same position

    Hi
    I want to send the PO approval to 2 people with same position simultaneously. Is there any workaround available to do the same?
    Regards
    Santhosh

    You can, but it requires modification to the workflow.
    You'll need to add an item attribute called approvers position. Then create a procedure that gets the position of the submitter's approver's position. Then set the item attribute in the procedure. Then in the workflow file, you'll need to ensure the notification in the process has the performer in the node set to type: item attribute and value: approvers position.
    Hope this helps.
    Jen

  • Got update with same build

    My Z1 compact came with 4.4.4 build no. 14.4.A.0.108. And now I've got an update notification with same build number. Should I update it or not? Its 1gb in size or else I wouldn't have had second thoughts.

    I have .108 and had a small .108 update so I updated assuming it was a minor tweak but no way was mine 1GB - Open Settings then Apps and swipe to All and locate Update centre and open then tap on Clear cache and Clear data and see if it's still there after a refresh of the app
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • X1 and USB Port Replicator with digital video - hangs system

    Hi
    with the X1 to help with docking it everyday at the office I have a USB Port replicator with digital video. I am not using the digital video but the USB ports, head phone and mics plus ethernet.
    When I plug it in it detects it OK, I then installed the software. But after reboot it looks to stall when logging into windows, screen flickers back and forth and locks up the operating system. I unlplug it and reboot and window is working fine.
    Note as I mentioned I am not using the digital output but instead using an external monitor via the display port on the back of the laptop.
    Also its is very slow to boot (Lenovo bios splash screen is there for about a minute)
    I have gone into the bios and turned off all other bootable devices just leaving the laptops hard drive.
    As a work around I have removed the software and I am getting the basic functionality of the port replicator, but not the ethernet.
    I have run the update manager but does not appear to show a need to update the drivers.
    Model X1 (1293-CTO)
    Windows 7

    Hi, I have this same exact problem.
    Video (anything from youtube to downloaded shows, movies) will freeze for 5-7 seconds at a time. The sound continues to play while the video is 'frozen', and the video resumes after that.
    It will happen on its own, with no bumping, but it is more prone to happen if I do something like increase the volume within the media player.
    Any suggestions are much appreciated!

  • Thinkpad USB Port Replicator with Digital Video - extended monitor shows only mouse icon

    Hi,
    I have been using my Thinkpad USB Port Replicator with Digital Video for quite a long time with my previous employer laptop. I recently switched job and got a new laptop (Dell XPS 3, Win 8.1). While installing/paring this laptop with the port replicator, I had some issues e.g. extended monitor not getting identified etc. I updated the drivers and now I am able to identify the extended monitor. But the extended monitor shows only the mouse icon and nothing else. I have upto date Intel HD graphics drivers installed in the laptop. Intel's Graphics control panel doesn't show the extend option for the USB monitor, but able to still move the mouce icon to the extended monitor.
    Any help/pointers to fix this issue is highly appreciated.

    I have the exact same problem on my W510. Everything but the screen Works. I cannot however do duplicate screens. That would help a Little bit, so I could use the big monitor instead of just the laptop.
    Please fix this Lenovo!

  • Drivers for ThinkPad USB Port Replicator with Digital Video

    I have a X220 P/N: 4291Gw9 with the port replicator P/N: 51J0246 running Windows 8 Enterprise. I tried installing the Windows 7 drivers with no luck. I can use replicator with keyboard and mouse but i dont see external monitor Sync Master 214T.
    Any workaround to this issue? I have 2 external monitors I use for work plus the laptop one as third.
    I realy need this second monitor.
    Details about my drivers versions:
    Windows 8 Enterprise + all updates
    Graphic card drivers: 9.17.10.2875
    Replicator drivers: tp_usb_prdigvid_v20620

    I have the exact same problem on my W510. Everything but the screen Works. I cannot however do duplicate screens. That would help a Little bit, so I could use the big monitor instead of just the laptop.
    Please fix this Lenovo!

  • Can I use both newly cloned MBPR retina and old-MBP with same Time Machine

    When my new-MBPR retina cloned from the old-MBP back up in Time Machine via migration assistance, will this newly-cloned MBPR continue thereon backing up with the same old-MBP back up in Time Machine? I.e. continuing same timeline?
    And what happen to my old-MBP back up, if I continuing to use my old-MBP with the same Time Machine on? Will TM recognised 2 different MBP and thus creating 2 back ups? I seem to have problem to keep 2 MBP running with same TM. Programs not responding even force quitting them!
    And what should I do to use both? Appreciate your help. Thank you.

    OK, but in general I can use this one device as both file storage and Time Machine.
    I thought that (for some reason) once I set up the Time Capsule to act just as Time Machine storage I would be unable to access it as a plain file storage.
    I have just tested it now, and it seems it can work as both - file storage and Time Machine. I can see the Time Machine backup file on it and folders where I can dump regular files.
    The only thing I would need to occasionally do is delete some old backups to keep Time Machine segment below 1 TB just so I have plenty of space for regular files.
    This thing is awesome. :)

  • While send/receive email, I have received an error message "Sending of password d"? However with same login details, I am able to login with other application.

    While send/receive email, I have received an error message "Sending of password d"?
    However with same login details, I am able to login with other application.
    I have changed password still the issue remains as it is.

    https://support.mozilla.org/en-US/kb/cannot-send-messages

  • Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

    Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

    there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

  • OS 10.8 just installed. "Hot Corner" to put new iMac 2.7 GHz Intel Core i5  to sleep mode doesn't work. Have tried cordless and corded mouse with same result. Momentary sleep, immediate wake. Any idea how to fix?

    Set "hot corner" to put iMac to sleep.  Doesn't work.  Selecting the corner will momentarily put to sleep, but immediately rewakes.  Have tried all four corners with same result.  Have tried with wireless mouse and with corded mouse with same result.  Any ideas as to how to fix?

    You've been so great, I want to thank you for all the help over a very frustrating day.  Last evening, I redownloaded and installed the fresh copy of Mountain Lion.  The problem remained.  After installing the new OS 10.8, any clicks on a web page (Firefox browser) didn't open the page, but instead made a copy of the page on the desktop. Felt it must be hardware  degrading, so I set up a case with Apple support for today.  Early in the diagnostics, I had swapped out for a corded mouse and the problem remained.   As a last try, I changed out my wireless mouse for a different wireless mouse. That seems to have done the trick. My Logitech mouse is incompatible with OS 10.8.
    Thank you again, so much!
    .../awards rkaufmann87 500 points!

  • What issues we may face in installing a new Prod portal with same SID as existing one

    Hello All -
    We found some vbs script files in the host of EP Prod system. On confirmation from SAP we deleted those files without any harm to our prod EP system. But customer is still concerned about the security of the system and wanted us build the new EP prod system with same SID.
    We approached SAP and they suggested to install a new EP system and do customization rather than performing system copy from existing prod EP system because that may still bring those security threat changes to new EP prod system. (we ll decommission the old EP if everything works fine in new EP)
    Now I would like to list all the issues we may face in building a new EP system with same SID as that of already existing one and then doing entire customization again in new EP from Basis team point of view. The following are very few i could think of. Could you please add some other concerns you could think of.
    1) Keeping in mind that this EP system is in use for more than 6 years, some of the customization could have been done on lower versions. So could those changes be again exported from Dev and imported into new version of EP we are building now ?
    2) Can't add two hosts with same name in DNS Server
    3) Can't add two systems with same SID in Solution Manager for calculation of SPS to upgrade new EP

    You would have to run ipsinstall and install the new gateway. Make sure to follow the installation instruction for installing a gateway.
    After you install the gateway you follow the steps in the link you posted to let the server know there is a new gateway.
    Then make sure to restart the gateway and server.
    HTH ..

  • Open Vi reference for Vis with same names

    Using VI server, is there any way to open reference to a VI on the hard disk even thought a VI with the same name (but different path) is already loaded in memory? I'm trying to see if it's possible without renaming and making sure every single VI I use has a distinct name.

    abdel2 wrote:
    For now, I can give different names but as the # of modules increases, it will be hard to have some Vis that don't have the same name.
    It wont be tough to keep distinct names.
    Just prefix or suffix your module name to the original VI name, so that you SDs will have VIs with same/similar functionality, but never conflict with each other when called during run-time. This is the procedure we follow in our project currently. We have gone ahead with the extent of packing all the DUT SDs (LLBs) into one complete auto-installer, so that in the target PC, everything get unbundled & installed into the appropriate folders that we have added while creating the installer.
    - Partha
    LabVIEW - Wires that catch bugs!

  • How to create device IDs with same name

    i am using SE 3310 and its creating different device ids for each node sharing it . since I will be building a RAC enviornment I need these IDs/name to be same .
    for example  on one node the lun id is /dev/rdsk/c3t0d0s6  but the same lun id on node 2 is /dev/rdsk/c2t0d0s6.
    In past with an old storage array I fixed this issue by creating links  in /dev/rdsk for  c3t0d0s6 --->  c2t0d0s6.
    my question is : is there a way in SE3310 that device ids get created with same name or do i still have to rely on creating these soft links ?
    thanks
    Note: since i need the answer to this quickly i will wait a while and then post this question in other forums and i will update the question here with the answer .

    This could be a Solaris (I presumed) O.S. question rather than SE3310 or storage question.  
    The logical device (/dev/[r]dsk/*) is the work of the O.S. when it first configures the device,  in this case the LUN from your SE3310.   I can go in depth on how the cX number happens (due to device probe order, driver differences, history of device discovery due to need of persistent device naming, etc...) but ... it's a really long story and is really quite irrelevant and most people should not be interested...
    If you have COMPLETELY identical servers, i.e. identical hardware down to specific HBA in specific slot are the same,   and if you make sure that luns are presented to all servers exactly the same way, same order, and any changes are seen by all servers in the same sequence,  in theory,  all /dev/rdsk/* devices will be consistent across servers.
    But that's still rather irrelevant.    Application that is designed to work in a redundant environment should not be dependent on logical devices like /dev/rdsk being the same.
    So ... in effect this is also not a question for the Solaris forum,  but rather a question for those familiar with RAC,  how to configure such that device access is done "safely" through actually identifying the lun rather than assuming /dev/rdsk are consistent.

  • How to create two employees with same name as supplier record?

    Dear all,
    We need to create a supplier record for an employee so that we can issue invoice for pretty cash payment. If there are 2 employees with same name, how can we create supplier records for these 2 employees? The system does not allow duplicate supplier name.
    Please advise.
    Regards,
    HY

    Hello,
    In R12 it is possible to create 2 employee with same name but different employee number.
    And also possible to create these 2 employees as suppliers in Payables.
    HTH,
    Vik

Maybe you are looking for