Notification of Workbench Request

Hi ,
Is there is any way to get notified when a workbench request is created or changed.
Regards,
Vijay

Hi Vijay,
Ccheck BADI CTS_REQUEST_CHECK. In this use interface CHECK_BEFORE_CREATION for notifying.
Thanks
Lakshman

Similar Messages

Difference between customizing request and workbench request?

Hi ,
What is the difference between customizing request and workbench request?
please reply.........

HI,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
pl reward if it helps.
Thanks
Sadhu Kishore

Customizing request and Workbench request

Can some one clarify me the difference elaborately
Thanks
Krishna

Hi Krishna
Changes to cross-client Customizing objects and to Repository objects are recorded in Workbench requests
In workbench request .... it can be programs(repository objects) and cross client data (ie not specific to one client).
Changes to client-specific Customizing objects are recorded in Customizing requests.
Customer customized data designed for a specific client is transported to another client using customizing request. Most of the cases these requests are something like changing values in tables (that too client specific).
Hope it helps
regards
Srinivas

Customizing request & Workbench request

Dear all,
What is the differance between Customizing Request & workbench request?

Hi,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Workbench requests record changes made to ABAP Workbench objects.
There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)
The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Changes to Customizing settings are recorded in Customizing requests.
When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
The client settings determine whether
o changes to the Customizing settings are possible
o the changes are recorded
When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the R/3 System.
Regards,
Satish

Find workbench request for existing report

Hi
Someone created an Report for me in order to develop some new functionalities.i have to transport it now in the test system but i do not know how i can find the workbench request for it or how i can save it in another workbench request.
thanks

Hi Seba ,
You can find the workbench request for the report by displaying the report and following this path in the menubar.
Utilities > version > version management.
If you want to add this request into another request goto SE01 and there you will find the icon for adding the objects for your request.
Regards,
Anuj

Workbench request released

Hi,
I accidentally released a workbench request for Asset Accounting in R/3. I have tried numorously to delete the request even in R/3. I now have an error when I try to change a query. Is there any way that a request can be deleted/changed after it is released?
Regards,
Adri

Hi Adri,
I'm not sure how can we back the changes from the target system. (it depends on version management and high complex issues)
And I sugget you to release a corrective request for the previous released request.
To capture, follow the process as you did before.
Create a new request in SE09.
To this request, assign the package associated to your query in BEx transport in Transport Connection (RSA1)
Hope this Helps! Assign pts if its useful!
Regards
GSK

STRANGE!!! Script in a Workbench Request.

Hi All,
Generally i am told:
1. All Client Dependent objects (Table Entries) ask for customizing request.
2. All Client Independent objects (Cross-Client table entries) ask for Workbench Request.
The SAP Script which is a client dependent object, but when i was saving my script it asked for a Workbench Request.
Could any one please let me know why this happens.
Thanks & Regards,
Goutham.

You have mentioned the answer inthe question itself. Customising requests are for Client dependent Table Entries. Since Script is not a table entry but a R/3 object it will be saved in the Workbench Request.
Regards,
Anish Thomas

Prompt for transportable Workbench request

Hi experts,
I want to create a web service, and let my asp.net program call it.
I input se37 in ECD, and input zzz_yyyy_xxxx as function module, then click "create" button.
In the next step, I need input "Function group", but I have not , so I need crate one.
In the "Create Function Group" dialog, I input "Function group" and "short texst", and click "save" button. It takes me to "Create Object Directory Entry", I input "Package" ,then press "Save"button again.
Now it takes me to "Prompt for transportable Workbench request" dialog. Now I need input "Request" and "short description".
I'm confused. What do I input as "Request"?
Thanks.

I am guessing you are quite new to this? It is asking you to create a transport package which can be sent to quality or production systems later on. If you do not want to do this you can click local object and it stays in development server. Otherwise you click the page icon and then type a description of the work/program you are creating. Save it and it will generate a transport package for you.

New Requests created are in 'Local Workbench Request' in R3 Development

Hello ,
I am going to transport data sources from R3 Dev to R3 Quality.
I have successfully transported the package (which is created in SE80 ) and Application componenet hierarchy and all active version data source RSA6 to R3 Quality .
I have also checked that the package , application transport hierarchy and data sources in R3 Quality.
Now when I tried to create new requests for LBWE data sources ( maintain extract structure , generate data source) , I am getting a message Create Customizing Request , So I created Customizing Request and then I am getting message to create Local Workbench request. If I create local workbench request then it can not be imported to R3 Quality.
Client R3 is open SCC4 settings are 'Automatic Recording of Changes ' and 'Changes to repository and cross client customizing are allowed'.
I am not getting why the system is not asking me to created 'Workbench Request'.
Thanks and Regards ,
Amol Kulkarni

Hello Viren ,
Local Transport Request are not transportable even if we release them.
I have resolved the issue in the below way ,
I went to SE21 and entered the package name as 'YBW' and then clicked on change .
Then Click on properties tab and then select Transport layer as SAP and save.
Go to SE80 and select package and in dictonary Objects drill down view ...right click on any selected view name ...go to other function and click on Write Transport Entry...mention request from Own Request tab which was earlier as Local Workbench Request.
Then go to SE10 and double click on request and go to properties tab ...there select Target Group as
R3 Quality Server name and save it.
Transport the package to R3 Quality.
Henceforth whichever request u create will be of type 'Workbench Request'.
go to SE10 and cross check that your request is now Workbench Request,
Regards ,
Amol K.

Difference between workbench request and customizing request in transport

Hi Experts,
I am new to SAP BI7 work. i am having basic doubt in Transort request creations
ususally we create the requests to transport the objects from Development system to further systems.
can anyone please clarify me, what is the main defference between the Workbench request and Customizing request.
Thanks and Regards
Mrudula

Hi ,
The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
1)WorkBench Request & 2) Customizing Request.
Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
Refer this links http://www.allinterview.com/showanswers/57910.html
customising and workbench request
Difference between Customizing request and Workbench request
and many more threads available on this.
Regards,
Rahul.

Maintenance of View V_DFKKCJM requires workbench request

Hi everybody,
I have the following problem with maintenance of view V_DFKKCJM (tcd FPCJM): Changes are recorded in a workbench request and thus, the view can only be maintained in clients which are opened for repository changes. The view is client-specific, so from my point of view, a customizing request should be sufficient to transport the changes. I assumed that changes are recorded in a workbench request because the view has delivery class 'A' and the table maintenance dialog uses standard recording routine for changes. (transport of data from an application table usually leads to workbench request).
I changed the delivery class of the view V_DFKKCJM to 'C' and expected that now, changes should be recorded in a customizing request, but it doesn't work out - i'm still getting a workbench request. I've debugged the whole thing and noticed that in function module TR_CHECK_TYPE, before detemining the request type depending on delivery class, table OBJH is read and if an entry in this table is found for the current object, then the required request is type 'R' (workbench).
Does anybody know, what table OBJH is for and how I could solve this problem?
Thank you for any suggestions, Kathrin!

Hi Kathrin,
you might have noticed - I haven't had a look into a system up to now.
Now I searched a table with generated table maintenance. We just have one open client, but in our sandbox (without transports ) I made a small test: I'm asked for a customizing request. Our database table has the data class (technical settings) APPL2 - that's probably the only data class which leads to customizing requests. User(1) seems not to be classified and APPL0(1) seems to lead to workbench requests.
If you tell me the place of the request type determination, I will do a debugging, too. But currently I'm too far away of the interesting parts.
Regards,
Christian

Single workbench request for CONSUMER PROXY in crm 7.0.

Hi all ,
I have a problem related to "consumer proxy" in sap crm 7.0 release. In our system , we have several proxies (existing) for consuming inter system web services (WSDL's) which were generated from SE80 , client proxies, wizard.
As we know , at the very first time of creation , the workbench request holds both the structure , class and object of the proxy ,but if afterwards , the proxy is regenarated for changed structure in WSDL , then that workbench request only holds the regeneration request , doesnt hold the base structure.
In our case , in those old proxies , there are so many requests .in some of it , many cross object requests are there , so we are facing problems to transport these proxies to a blank client(newly created).
So my question is
IS THERE ANY WAY TO CREATE ONLY ONE WORKBENCH REQUEST (MIGHT BE FROM SE80) FOR THOSE EXISTING PROXIES , THAT THEY HOLD THE STRUCTURE AND THE CHANGED STRUCTURE ALSO FOR INDIVIDUAL.
THANKS IN ADVANCE.
ARNAB MUKHERJEE
INTEGRATION DEVELOPER.

Hi,
Refer the following to get the understanding the Equipment download to CRM.
You define the default settings for replicating equipment in the IMG activity: Customer Relationship
Management -> Master Data -> Installed Base -> Replication of Equipment from SAP R/3 Customer
Service -> Define Default Settings for the Equipment Replication.
For more information about the integration of different systems, see the SAP Library under mySAP
Customer Relationship Management -> Architecture and Technology -> Business Integration -> CRM
Middleware.
The Business Add-In : Business Add-In: Equipment Upload (CRM_EQUI_LOAD) can be used to
flexibly enhance the data transfer and validation in SAP CRM. The Add-In offers comprehensive options
for influencing the mapping between equipment and individual objects
Also refer to the following notes:
1. Note 627279 - Serial number & configuration download
2. Note 637173 - Equipment download/delta synchronization
Hope it helps.
Regards,
Rajiv

How to insert WorkBench Request to a domain using a function Module...

Dear ALL,
                    I am creating a program where I have created a domain using a Function Module and assigned the same domain to a package using a Function Module. Now I want to assign the domain to a WorkBench Request...Can anyone tell me of a Function Module to achieve the same??? Please note that the WorkBench Request is entered by the user on the Selection-Screen.
Moderator message: please do not open multiple threads for the same issue, rather follow up (or bump up) on existing ones.
Edited by: Thomas Zloch on Dec 15, 2010 1:18 PM

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

Question to local workbench request

Hi,
I have question to local workbench request. If this kind of request is released, is it stored also in the local transport folder (/usr/sap/trans...) in the file system? Or where I can find it?
Thanks for your answers.

Hello Andreas,
A local workbench TR or for that matter any local Transport Request is one which has no target group/target system assigned to it and hence even after releasing it the changes stored in it don't get moved to other systems.
A local TR when released does not get stored in /usr/sap/trans folder as data and co-files for local TRs don't get created.
A released local TR can be viewed in SE01 transaction in SAP.
Please let us know what is your exact requirement with local workbench TR? May be we will be able to help you out with that.
PS award points if you found this answer useful.
Regards.
Ruchit.

How to transfer local workbench request to production server

Hi,
All my workbench requests are saved under local change request node instead of being in the production system node. How to release and transport these requests to the production server.
Kindly help.
Regards,
Sriram

Hi Sriram,
In SE01 check whether u have given value for target system or not.
Target system is ur production system .Check whether u have specified it in SE01 for ur transport request.
If u have not specified target system for ur Transport request it will be shown in Local Workbench request
Regards,
lakshman.
Edited by: Lakshman N on Aug 4, 2009 9:31 AM

Notification of Workbench Request

Similar Messages

Maybe you are looking for