Notification on new sended bid of bidder in RFx

Hello together,
I got the requirement from our purchasing department that the purchasing group from the RFx should get a notification each time a new bid has been send for the RFx. Anyone has a suggestion how to realize this the best way?
Thank you and best regards,
Dennis

Please refer to http://scn.sap.com/thread/3593605

Similar Messages

  • RFx notification after Accepting the Bid

    Dear All,
    I am working in RFX process in SRM 7.02,
    1. When the RFx response is submitted from bidder, the Buyer open the Rfx and Accept or reject the Rfx Response .
    The Notification should be send to Bidder about the Accept or Reject information.
    2. When the RFx Deadline date is going to reach.(i.e for E.g. the deadline date is end in another 3 days), The Buyer and bidder both of them should get a notification about the deadline date information.
    Kindly guide me , how to achieve the above requirements.

    Hi,
    As far I understood you question you are asking How to accept or reject Rfx response and  Where to check the notification ? Are you using Bid or BIDx secenario ?? this is not confirmed
    First of all you have to check the box  for PAYMENT .
    *To achieve this LOGIN TO SRM SYSTEM and go to RELATED LINKS TAB  .. click and in drop down choose payment.--->EBID--> Checking to paid ---> ok ---> Save.
    Now, Login as a Bidder ( MUST CHECK LOGGING AS EXTERNAL BIDDER OR INTERNAL BIDDER). IF you have choosen as external in srm system you must login as external bidder and vise versa.
    In Bidder system, click on Create Response---> item--->submit---> refresh.
    Click Tracking---> click Respond and Awards tab----->click Response, now Response will open ---> click on Accept or Reject.. Check the status it will come '' AWAITING APPROVAL''
    You have approve this awaiting approval to be approved .
    NOTE:-
    when ever you are login as a Bidder system and creating the response you should select EMD paid( IN SRM SYSTEM) , then only response will reflect .
    BEST REGARDS
    Anamika M

  • Workflow notification are not sending to employee

    gusy,
    on 11.5.10
    We have created New type in Special information which access by SSHR,In this page in sshr employee enter their information and send to manager for approval,while submiting system shoud be generated two notification one for requester and other for supervisor,but the requestor notification are not sending while supervisor is woking fine,so how can i rectify what the exact prolem with requestor notification,
    could you please adive..
    Thanks

    The workflow notification back to the requestor is just an FYI notification. When the Workflow Mailer emails a copy of the FYI notification it automatically closes the workflow notification.
    Could it be that this is happening? Try this:
    1) Login as the Requestor and access their Worklist
    2) Change the view to see 'Closed' Notifications
    3) Do you see the notification in the list of closed notifications?
    If so, try temporarily disabling the Workflow Mailer so that no email copies are sent and then repeat the SIT request. Does the requestor now see that notification in their 'Open' notifications?

  • Reg: PO release notification needs to send to the PR Creater with PO num

    HI Gurus,
    Iam new to workfow. I have one senario in workflow.
    Requirement: when ever PO release notification needs to send to the PR Creater with PO number and corresponding PR number.
    Please guide how to do this .
    My questions :
    1.How can we can get the PR Creater user id to send notification mail
    Thanks & Regards
    Ramesh

    Hi Ramesh ,
    Which workflow you are using for PO . If it is the standard one , there is a rule used in the worklfow called 20000027.
    In this there is an USer exit . In this exit , you can write your code for sending the workitem to the PR creator.
    If you are using a custom workflow for this , then create a new rule and in that write the code for fetching the PR Creator and assign the user ro the actor tab. Incluse this rule in ur task .
    This will solve your problem.

  • How to Obtain Notifications of New Flash Releases

    Hello:
    Sorry if this has already been posted [I looked in the FAQ and "Read This First" sections] or if this isn't the right place to post [I couldn't figure out how to submit this to Adobe support] this type of inquiry, but I would like to know how I can receive notifications of upcoming Flash releases.
    I have recently signed-up to be able to distribute Flash [not sure if Adobe sends new release notifications with this service], have subscribed to the security alerts notifications [that may not always provide notification of new releases] and signed up to receive Adobe update notifications when I created my Adobe profile, so I could submit this post [I'm hoping the later will provide the new release notification stream I'm looking for].
    If none of the options [above] will provide me with new release information or there is a better "stream" for these types of notification [e.g. RSS feeds] and some one could let me know what that is, I would greatly appreacite it.
    Thanks,
    Robert Lindholm
    University of Rochester

    eidnolb:
    Thank you for taking the time to respond to this post; it's sounds like I should [hopefully] be receiving update notifications through one of these streams.
    Essentially, I wantr to know when a Flash update is available, so I can proactively update client computers I manage, since the end users don't have the abilityu to approve [install] the updates themselves.
    While supressing the update would hide the udpate from end users, I would like to be able to apply the update ASAP for security and usability reasons.
    Thank you again for your reply, I appreciate it.
    Bob

  • How can I disable notification for new install update for adobe??

    How can I disable notification for new install update for adobe (adobe reader, flash player, etc.)
    Is there way from SCCM2012 or group policy or any easy way?????
    Please help me

    If you mean the built-in functionality of Adobe Reader and Adobe Flash, it's different mechanism for both.
    For the reader, check this guide for example:
    http://www.adminarsenal.com/admin-arsenal-blog/bid/84409/Adobe-Customization-Wizard-XI-Tutorial
    For flash, check this guide for example:
    http://jthys.wordpress.com/2012/07/07/disable-automatic-updates-for-adobe-flash-shockwave-player-reader/
    After you've studied the above guides, you need to implement those to be used with ConfigMgr application deployment so that when you deploy Reader/Flash, you get the result you want = no automatic update functionality.

  • Mailo Notifications For New Mail In Subfolders

    We are rolling out Office 365 Microsofts new cloud solution for Exchange and have been running iPhones, iPads and Windows mobiles. Amazingly good response back from useres on the Apple offers which is great. One issue we have is that some users have rules set up on their Exchange inbox where emails are diverted to certain folders accoring to their content or the sender. The iPhone doesn't seem to provide any notification of new mail in these sub folders. Has anyone come across this or even better have a solution or how to handle this?
    Thanks loads
    Grant

    That's the main problem in that it needs to show the number. It seems a bit daft that Apple would include the ability for it to play a sound but not show the total number. A prime example is either if you do not have a sound set or perhaps are in a meeting and have the phone on silent. Also it is tedious to have to expand folders to find the one with the mail. If a user has a number of mailboxes as some of ours do, it is very cumbersome to have to view each account and then subfolders to find the additional mail.
    With the big Microsoft vs Apple battle starting to hot up with Microsoft launching their Office 365 cloud offering for business this really is something that Apple needs to address to make sure that their iPhone/iPads stay in contention with BES and Windows Mobile etc.
    The feedback we have had from Mac users when using a test of the Beta of Microsoft Office 365 with Apple devices (iPhone/iPad) is amazing and even they were happy to admit it made their lives immeasurably easier. Let's just hope Apple rise to the challenge and make these small tweaks to make the devices truly enterprise useable!
    I still think Apple should make a user voting system on this site so that people can register with a set amount of votes and assign how many votes they want to a particular feature. Then the public vote would show Apple what people really want! Or let’s get Apple to organise some business forums in the UK as well as the USA so European businesses can input they thoughts on the products.

  • No password sent in GRC10 notification for new users

    Hi,
    I have a strange problem in our GRC10 system. 
    We send email notifications to users on completion of user access requests after provisioning is complete.  The notification contains the PROVISIONING variable, so new users should be notified of their initial password in the message.  This works fine on tests against our development system.  The email contains the user ID, the roles assigned, and the password information.
    However when the same process is followed in our Production system, the notification only contains the user ID and roles provisioned - no sign of any password information.
    We're currently running GRC 10.0 SP13.  The plugins are all updated to the same level.  We have the global provisioning configuration set OK, and all SAP Notes that appear to be related to the problem have been applied - but I still can't get emails to be displayed in the email notifications to new users.
    Can anyone offer any hints or suggestions to try?  I have even looked at password-related startup profile parameters as a last desperate straw.  I found 4 differences in settings between our Dev and Prod systems. would theses cause an issue?  the parameters were:
                                                                       Dev             Prod
    login/min_password_digits                               0                  1
    login/min_password_letters                              0                  1
    login/password_downwards_compatibility          1                  3
    login/password_max_reset_valid                     N/A                30
    That 4th parameter doesn't exist in our Dev profile.
    please help - I'm desperate on this one...

    Hi Ian
    I'm starting to run out of suggestions for you.I would probably put a trace on the RFC back to the GRC to see what the system user does. AS well as that check ST22, SM21 and SLG1 logs to see if any error. Already you've confirmed configuration and system match each other so it's down to data and security or program issue.
    In using the trace, may be able to identify the function module/RFC and then do a consistency check on the code to make sure nothing out of the ordinary there.  Depending on your background grabbing an ABAPer would help her.
    Also, as it's your production system do you have multiple app servers and load balancing in play? It's one area where your DEV and PROD may vary. Possibly the password is "leaving" the plug-in but getting lost in the nether as it goes to your GRC. I'm taking a complete stab here and showing my deficiency in Basis and System Admin.
    Otherwise, unless Marketplace has another correction not you probably need to raise an Incident.
    Regards
    Colleen

  • HT1923 got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127),

    got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127), I tried repairing itunes, Apple Aplication support, apple mobile device support, bonjour and I even uninstalled and reinstalled Itunes and still problem exist, any solution?
    I have windows 8

    I got this message today too. I understand that my music is stored on my computer, however I want to be certain that if I re-install iTunes, it won't erase my library....playlists, playcounts, checked songs, etc.

  • Email notification on creation of bid inviation /Auction?

    Hello,
    I have configured SRM 550 release , unable to send bid invitation mails to bidders on document( like bid invitation/auction) cretaion/Change .
    IN SRM 4.0 we have not configured any alerts management. IN SRM 5.0 is it necessary to configure alert management to send mails.
    If yes, please tell me procedure how to configure...
    Any hint pls.
    Thanks in advance .
    Regards,
    Venkatesh

    hello..
    Finally i have found out solution...there is IMG setting ..
    In SPRO -> Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Set Output Actions and Output Format -> Define Actions for Document Output.
    In this for Bid Invitation (BBP_PD_BID) action profile in action defintion Processing time we have chagned from "Processing from selection report " to "Processing when saving document".
    Now mails are getting generated automatically..
    But standard smartforms are calling ..can any please tell me how to call our custom smartforms instead of standard...please help

  • Still Receive Multiple E-Mail Notifications of New Posts When Subscribed

    In days past, a user would only receive one e-mail notification of new posts to a thread to which he/she was subscribed. You would have to visit said thread before you would receive new e-mails. Sometime during the last big change in the structure of the forums, this way of e-mailing notifications changed. Now I am bombarded with a new notification each time a new post is made to a subscribed thread. I may have ten or more new e-mails just notifying me of new posts to a single thread before I even get a chance to make a return visit. The old way was much, much neater. Any chance of a return to that?
    Regards,
    Steve M.

    I experience it even worse.
    I receive Notifications and Digests for threads that weren't changed.
    I mean to say that
    -I post an answer to some topic.
    -Automattically I am subscribed to that Thread (that's OK, I asked for that in my settings)
    -I receive lot's of Notifications and Digest ALTHOUGH NOBODY ADDED A NEW POST TO THE THREAD. It seems as if the Notification also reacts any time anybody is READING the thread.
    It seems obvious to me that I only want to receive Notifications (and Digests) of Threads that are altered in some way since the last time I read the thread OR received a Notification or Digest.
    That is:
    - new post added to the thread
    - a post has been altered by one of the posters
    - a Solved or Helpfull mark is given.
    Hope Apple can fix this.
    thanks
    Rienk

  • Notifications failed to send mail for journal approval with attachments

    Issue : Notifications failed to send mail for journals sent for approvals with attachments.
    Error :
    [WF_ERROR] ERROR_MESSAGE=3835: Error '-6502 - ORA-06502: PL/SQL: numeric or value error: character string buffer too small' encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.send'. ERROR_STACK=
    WF_XML.GetAttachments(71009549, http://vfilvappclone.verifone.com:8000/pls/EBIZRPT, 13525)
    WF_XML.GenerateDoc(oracle.apps.wf.notification.send, 71009549)
    WF_XML.Generate(oracle.apps.wf.notification.send, 71009549)
    WF_XML.Generate(oracle.apps.wf.notification.send, 71009549)
    Wf_Event.setMessage(oracle.apps.wf.notification.send, 71009549, WF_XML.Generate)
    Wf_Event.dispatch_internal()
    Cause : Above error is thrown for Journals with attachment of file type Microsoft Office Excel Macro-Enabled Worksheet (.xlsm)
    Can anybody help with this?

    Please post the details of the application release, database version and OS.
    Please see if these docs help.
    ORA-20001 & ORA-06502 Workflow Errors [ID 761638.1]
    Manager Approval Notification Gives Error: Ora-O6502: Pl/Sql: Numeric Or Value Error: Character String Buffer Too Small [ID 352213.1]
    Approval Confirmation Email Is Not Received By Preparer - ERROR_MESSAGE=3835 ORA-20001 ORA-6502 [ID 465146.1]
    Notification Fails To Be Generated When A DOCX Document Is Attached [ID 1058183.1]
    Not Able To Send Multiple E-Mails Upon Approval Of Purchase Order [ID 333719.1]
    Expenses Workflow Error: "ORA-06502: PL/SQL: numeric or value error: associative array shape is not consistent with session parameters has been detected in fnd_global.put(CONC_LOGIN_ID,-1)" [ID 455882.1]
    Using Microsoft Office 2007 and 2010 with Oracle E-Business Suite 11i and R12 [ID 1077728.1] -- Notification Generation Fails
    ORA-06502 Buffer Too Small Error in Contracts Workflow Notification [ID 870712.1]
    Thanks,
    Hussein

  • Notification mail not send

    Hi All,
    I have an issue in PR workflow.A notification mail is send to user to approve a PR,but the user says that he did not receive that notification mail.He manually goes to transaction & approve the PR & workflow gets completed.
    Please let me know how to find out the cause of this problem.In my workflow log it shows workitem approved by the user.
    What can be the cause that notification mail is not send.The user email id is maintained in su01.
    Please help.
    Thanks in advance

    Hello,
    You wrote:
    "As he executed that step manually ,automatically the workitem got deleted from the user inbox"
    This is not something that happens automatically. Is the workflow listeing out for an event which tells it that the activity represented by the step has already been done?
    I assume you mean the user performed the operation that was supposed to be done via the workflow step, not that he performed the workflow step itself. If the workflow log shows that he did perform the step, then the user is mistaken.
    regards
    Rick Bakker
    Hanabi Technology

  • My mailprogram in OS 10.6.7 frequently gives on old content/mail connected to an actual / new sender.

    My mailprogram in OS 10.6.7 frequently gives on old content/mail connected to an actual / new sender.

    This sounds like an indexing problem.  Force a reindexing by deleting the Envelope Index. With IMAP or Exchange account, forcing reindexing requires removing the account folder. See:
    http://docs.info.apple.com/article.html?path=Mail/4.0/en/14019.html
    Ask any questions needed to get comfortable with doing this.  Do you have any third party plugins or Mail enhancement apps that might be moving stuff around?  This would not be good for the index.  Rebuild on an IMAP account, where local copies of messages are kept may not be as clean as it would for POP and On My Mac mailboxes.
    Ernie

  • How to create a notification for new virtual machines created on Hyper-v Using SCOM or another way?

    Hi ,
    We need to  to create a notification for new virtual machines created on Hyper-v Using SCOM or another way
    thanks

    http://sincealtair.blogspot.com/2010/04/how-to-ask-questions-in-technical-forum.html
    Not nearly enough information.
    If you are asking about SCOM, it is better to ask in the SCOM forum -
    http://social.technet.microsoft.com/Forums/en-US/home?forum=operationsmanagergeneral
    .:|:.:|:. tim

Maybe you are looking for