Notification on Receipt and Purchase documents getting fired on Production order having Items with planning method as MRP

I have written a SP Notification to block adding of documents if block number is not provided. Notification is working fine on Purchase and Receipt documents. This notification also gets executed on Production Order where items included in Production order have planning method as MRP.
Can anyone explain me the relationship between
"MRP planned items"
and
"Purchase documents (Purchase Order; GRPO; Purchase Return; AP Invoice and Credit Memo) and Receipt of Production."
Thanks & Regards
Sonil Bhardwaj

Hi Sonil,
Can you post your SP , to look if there is any problem with SP ..
Regards

Similar Messages

  • Contract ID and Purchase Document No in MM

    Guys,
    Please help me to understand if contract ID  and Purchase Document No in MM
    will be the same thing or not.. In a report i need to get Purchase Document No but
    in the datasource i have only contract id.. To my knowledge contract is a document type under purchasing...So contract id should be equal to the purchase document no in that case... is it right???? Please confirm

    Hi,
    well both numbers are stored in the same field. In your source system it is ekko-ebeln. But the document type defines the number to be a purchase order or a contract no. And so it is in BW. The number is stored in the same infoobject, but together with the document type you can identify that number as a purchase order or a contract no.
    Hope that helps!
    kind regards
    Siggi

  • FAGLB03 - cannot display asset no and purchasing document

    When I used FAGLB03 to view balance (G/L account group is "Assets accounts") and drill into details, then I go to change layout and choose asset, purchasing document fields.
    I find that the report cannot diaplay asset no and purchasing document value (all value is empty, but I can see asset no and purchasing at fi doc line item by T-Code FB03).
    Please advice any solution.
    Thanks!
    Edited by: Eric Yang on Jan 30, 2008 11:40 AM

    Hi,
    Thanks for your reply,
    But I can find asset no, purchase order no and Internal order no In T-Code FB03 display document line item for account type "ASSETS ACCOUNTS".
    Beside, I use se11 to query table bseg for fi document, if account type = 'A', I can find asset no in fields ANLN1, ANLN2 and purchasing no in fields EBELN, EBELP.

  • Is the purchase order number and purchase document numer both are same

    is the purchase order number and purchase document numer both are same or different?
    thanks.

    Hi Sunny,
    Yes they are same. You will be creating a purchase order in ME21n. After creating purchase order you will shown a number for that order.
    Reward points if useful.
    Thanks,
    Swamy Kunche

  • Relation between goods receipt and material document number

    guyz!
    i got stuck up at one functional doubt. can any one say link between goods receipt and material document number. in other way, i wanted to know difference between these two i.e. goods receipt and material document number. or both are same.
    awaiting for reply
    manas

    Hi,
    Just have a look if this thread can solve ur problem.
    Re: display goods receipt
    Rgds,
    Prakash

  • What is the difference between po and purchase document

    Hi experts,
    What is the difference between purchase order and purchase document.
    Are they both same ?
    Regards,
    Nishuv.

    Dear,
    Purchasing document can be RFQ,PO,PR...RFQ...Contratc...etc
    PR is interanl document that can be changed at any given point of time.
    PO is external  legal document and is formal request to vendor for materials.
    External docments are legal documents used for procuremnt/quotation etc.
    Internal documents like PR are for internal use.
    Brgds,
    Ashok

  • I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this windows package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."

    I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I accidentally removed the Bonjour service from my system a few weeks ago, but my iTunes continued to work. Now I have no iTunes and I don't know how to fix it. SOMEONE PLEASE HELP!!!!

    a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
    also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
    (i'm not on windows, so i can't test...)
    good luck!
    j.
    Correct Answer by Peter Lepere  on Oct 14, 2011 3:07 AM
    Hi Rick,
    by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
    Success,
    Peter

  • Document attachment to BOM and has to be viewed in Production Order too.

    HI! Friends
    Can any body give the detailed procedure for attachment of Drawing Doc to BOM and it should be viewed
    in Production Order, the idea is before production it should be viewed.
    Thanks & Regards
    MDSFR

    Dear MDSFR,
    I'm not sure whether the system will disply the document directly in the production order,but you can check the list of
    documents in the production order in the document overview and assuming the documents are created with a proper document
    type and attached in the BOM of the product(production order header material) as document items with category "D".
    Check these links,
    Re: How to attach document to production order?
    Attaching documents in BOM item list in production orders
    Regards
    Mangalraj.S

  • Experiencing trouble syncing with the 10.3 version of iTunes on my Windows Vista machine. Have uninstalled all Apple software twice, reinstalled and continue to get an error 7 message in connection with the Photo Processor. Any other ideas to try?

    Experiencing trouble syncing with the 10.3 version of iTunes on my Windows Vista machine. Have uninstalled all Apple software twice, reinstalled and continue to get an error 7 message in connection with the Photo Processor. Any other ideas to try?

    Hi,
    got it fixed! My Son had both files on his Win7 iTunes installation. Never mind he had no issues whith ths iTunes and iPhone Sync. So I checked my other Win XP PC, where I don't have this problem syncing my ipad, and surprise. Both files do NOT show up on this PC. So I renamed the iTunesPhotoProcessor.exe I found under c:\program file\iTunes and synced again my iPhone and it went through without any error. So the problem might be and unremoved iTunesPhotoProcessor.exe or the missing iTunesPhotoProcessor.dll under the iTunes install root folder and this even if I had checked that the folder was completely removed during iTunes unistall.
    Please try yourselve and just rename the iTunesPhotoProcessor.exe to iTunesPhotoProcessor.exe_ under c:\program file\iTunes or get a copy of the missing iTunesPhotoProcessor.dll and cp to c:\program file\iTunes.

  • Hi guys yesterday i had my house robbed and they took my iMac which i purchased in 2011. so i went out and purchased a new iMac today but im having problems transfering all my music from my iPhone 5 to it. Any suggestions???

    Hi guys yesterday i had my house robbed and they took my iMac which i purchased in 2011. so i went out and purchased a new iMac today but im having problems transfering all my music from my iPhone 5 to it. Any suggestions???

    iTunes Store- Transferring purchases from your iOS device or iPod to a computer.http://support.apple.com/kb/ht1848
    Or you can use a third-party utility such as Phone to Mac - Pod to Mac.

  • Asking for purchasing reqistioner no. while making production order

    dear all
    asking for purchasing reqistioner no. while making production order.how do get rid of this reqisitioner no. option from production order.
    regards
    manish sharma

    Hi,
    Chcek the BOM copied to the order or the items that you are entering while creating the order, if item categories are N, purchse requisitions are automatically created and related info is queried from the user. Change item categories to L, stock items if external procurement is not relevant.

  • How get all released production orders

    Hi experts,
    I need to get all released Production Orders for a specific plant. I noticed that usually you don´t select directly from table AUFK. Most of people use function module WCFS_STTXT_GET to get the status of an order. I know that table AUFK has fields ASTNR (status) and PHAS1 (released) however those fields don't reflect the status of an order (thatu2019s why WCFS_STTXT_GET is used).
    Also, I know that table JEST contains status for an order; however, for a simple order that table shows more than one status (I guess is like a history of all status the order had).
    So my question is: How can I get all released orders for an specific plant? If I use WCFS_STTXT_GET I would have to select all orders and check the status one by one, which is obviously not efficient at all.
    Thanks!

    Hi Carlos,
       As far as i know, it is not possible to get the latest status on a production order. if we see a production order in CO03, we see that all the status' are displayed on the order which it has been through.
    I remember we had to include the system status logic similar to the transaction COHV, and we had used the table JEST for the same.
    Kindly update the solution if you find any.
    Thanks.

  • Activity price not getting updated at Production order

    Hi All,
    I have made activity dependent planning at cost centre and calculated the activity rate. The activity rate is showing correctly for the cost centre in KP26, but while confirming the production order (CO11N) the the activity price is not getting updated in production order. But material price is getting properly updated at production order.
    Plz help me in identifying the possible areas of mistakes.
    Regards,
    BKD

    Hi,
    Please check the Period for which you have created the ht activity price is same as the period in the conformation. In the workcenter in which you are confirming please check whether the activities are assigned to the work center.
    Bye,
    Ramesh

  • DTW Problem ---- Goods Receipt and Purchase Order

    Hi Owen Slater and Suda
    Your reply helped me a lot in loading in linking the GR with PO via DTW.But still i m having a small problem.
    In Document_Lines of Purchase Order and Purchase Delivery Notes i specifed two Taxcode as "Exempt" and "[email protected]" under the column "Taxcode" and initially loaded the purchase order,the tax code get added correctly to the purchase order and when i tried to load the GR for the same line item with same tax code,the tax code is not getting added to the GR line item and the tax amount get deducted in the GR.
    For more information: SAP Business One SDK
    Edited by: Rui Pereira on Nov 7, 2008 1:23 PM

    Purchase Order Documents
    Recordkey  Cardcode  DiscountPercent  DocDate   DocDueDate  DocNum  DocTotal
    Recordkey  Cardcode  DiscountPercent  DocDate   DocDueDate  DocNum  DocTotal
       1         AA01        0            20080912   20080912     1       
    oPurchaseOrder:Document_Lines
    Recordkey  LineNum AccountCode DiscountPercent     ItemCode  Linetotal  Price  Quantity  Taxcode   WarehouseCode
    Recordkey  LineNum AccountCode DiscountPercent     ItemCode  Linetotal  Price  Quantity  Taxcode   WarehouseCode
       1                1211005        0           ITM01                850     45        [email protected]     Godown1
       1                1211005        0           ITM02                750     55        [email protected]     Godown1
    As per your suggestion i left the "DocTotal" column of  PO --- Document and "Line Total" and "Line Num" column of PO ---Document_Lines as blank and also the Discount column is assigned to 0 and this get imported correctly.
    oPurchaseDeliveryNotes:Documents
    Recordkey  Cardcode  DiscountPercent  DocDate   DocDueDate  DocNum  DocTotal
    Recordkey  Cardcode  DiscountPercent  DocDate   DocDueDate  DocNum  DocTotal
       1         AA01        0            20080912   20080912     1       
    oPurchaseDeliveryNotes:Document_Lines
    Recordkey  LineNum AccountCode  BaseEntry  BaseLine  BaseType  DiscountPercent      ItemCode  Linetotal  Price  Quantity   Taxcode   WarehouseCode
    Recordkey  LineNum AccountCode  BaseEntry  BaseLIne  BaseType  DiscountPercent      ItemCode  Linetotal  Price  Quantity   Taxcode   WarehouseCode
       1                1211005        1          0          22           0             
       1                1211005        1          1          22           0             
    When it is imported like this ,it get imported successfully.
    But when i change the WarehouseCode or give new WarehouseCode in oPurchaseDeliveryNotes ---> Document_Lines
    like this
    oPurchaseDeliveryNotes:Document_Lines
    Recordkey  LineNum AccountCode  BaseEntry  BaseLine  BaseType  DiscountPercent      ItemCode  Linetotal  Price  Quantity   Taxcode   WarehouseCode
    Recordkey  LineNum AccountCode  BaseEntry  BaseLIne  BaseType  DiscountPercent      ItemCode  Linetotal  Price  Quantity   Taxcode   WarehouseCode
       1                1211005        1          0          22           0                                                                Godown1
       1                1211005        1          1          22           0                                                                Godown2
    1)Here i m chaging the Warehousecode of  ITM02 to Godown 2,its getting imported successfully.But when this imported record is viewed in Purchasing - A/P ->Goods Receipt PO of  SAP B1 GUI , the matrix (GR_DocumentLines) does not have the taxcode  i.e the TaxCode column is left empty.
    2)Also even when the taxcode is specified under the oPurchaseDeliveryNotes_DocumentLines and importing the same problem occurs ,the matrix (GR_DocumentLines) does not have the taxcode  i.e the TaxCode column is left empty when it is viewed through SAP B1 GUI.
    Edited by: Rui Pereira on Dec 9, 2008 5:10 PM
    Edited by: Rui Pereira on Apr 28, 2009 12:18 PM
    Edited by: Paulo Calado on Jun 18, 2009 5:20 PM

  • 2LIS_02_SCL: goods receipt and invoice document number

    Hi,
    the BI Content documentation for the [Purchasing Data (Schedule Line Level) (2LIS_02_SCL)|http://help.sap.com/saphelp_nw04/helpdata/en/8d/bc383fe58d5900e10000000a114084/frameset.htm] DataSource reads:
    The DataSource also provides information about the documents that are posted with regard to the purchase order, such as goods receipts and invoices.
    The point is: where are the documents' numbers ?
    When I test the extraction, I get the expected number of records, provided that those records with ROCANCEL=X (cancellation of Data Record) are taken into account.
    For example, for a Purchase Order (PO) Schedule Line that has 3 Goods Receipts (GR) and 1 Invoce (IR), I get:
    - 1 record with BWVORG=1 (SAP BW - Transaction Key) and ROCANCEL blank, for the PO document;
    - 6 records for the 3 GR documents (BWVORG=2);
    - 2 records for the 2 IR documents (BWVORG=3).
    Therefore the DataSource provides the needed level of granularity. Just the field I need is missing, i.e. BELNR!  Is there any trick to get it or the only way out is enhancing the DataSource?
    Thanks, [Davide|https://wiki.sdn.sap.com/wiki/display/profile/Davide+Cavallari]
    Edited by: Davide Cavallari on Jan 18, 2008 5:38 PM

    I think I would choose the option that takes advantage of 3 DataSources:
    - 2LIS_02_SGR, for GR number;
    - 2LIS_06_INV, for IV number;
    - 0FI_GL_4, for document amount, as well as some other informative characteristics, such as document type (useful when the document is an invoice), referred document (the field that contains the supplier's document number), document date, posting date
    The Logistic DataSources would basically provide the link between GR and IV, while the General Ledger DataSource would provide the financial information.
    In fact an analysis for controlling purchase expenditures at a detailed level is required. Not just a simple analysis of expenses for vendor, or even purchase document, but for any financial document posted to the General Ledger. This analysis has sort of a financial perspective. Probably it's not the kind of strategic analysis best suited to BI. It has a more tactical, operational nature. And maybe BI is not the best platform for developing this kind of application.
    Anyway, if you have better ideas or any suggestion on this topic, please feel free to comment!
    Cheers, [Davide|https://wiki.sdn.sap.com/wiki/display/profile/Davide+Cavallari|My wiki profile]
    Edited by: Davide Cavallari on Jan 19, 2008  8:16 PM

Maybe you are looking for

  • IPhone 6: Where's the status bar in landscape mode?

    I just got the iPhone 6 (I believe iOS 8.1) and my only problem is that it removes the status bar in when in landscape mode. I find it extremely annoying that I can no longer see the time, monitor my battery life, check whether if I'm even receiving

  • Bold text in general ALD

    Hi Can you please let me know how to make font bold in ALV using function module? I mean REUSE_ALV_GRID_DISPLAY? BEst REgards Chinmoy

  • Exta fields to a std report copied to a Z

    Dear Experts, I have copied the std program RS_SOLAR_EVAL_DOCU into a Z report. The output is a ALV tree. My requiremetn is to adda additonal 5 fields to this ALV tree output. Please throw some light on this. I can either copy the classes in it, func

  • Mac mail CRASHING after Yosemite update 10.10.3

    Are you KIDDING APPLE? mac mail CRASHING after Yosemite update 10.10.3 The program is completely unusable and crashed after update. Computer is less than 1 month old and can't run a basic mail program I REALLY HOPE APPLE FIXES THIS BUG ASAP     Witho

  • Getting iTunes to see music files on a different drive

    My main HD failed, so I've been re-installing all my apps. I had all my music files on a separate internal drive. I have tried everything I can think of, to get iTunes to "see" all my music files. I've held down the option key when starting iTunes. I