Notification print Error message :- No entries were found in the Cataloge T

HI All ,
when printing the notification throgh the transaction ISQ2 , I have released the Notification as well the task , even i have tested to complite status also , but when i am going to Pint the notification i am getting the error message like no entries were found in the cataloge T.
Is there any custunization missing or the possibility of autherisation issue , i have checked the cataloge & assignmnet also in cust , it is proper ,
Regards
piyush

resolved throgh debugging , the short text & long text is not maintain for the Catalouge.

Similar Messages

Error message when no atachment found for the workitem while approving ?

Hi Folks,
I need some help in this issue please.
Requirement is, Agent needs to attach a document to work item and then approve. To achieve this, i have put code in for complete execute condition of the step.
This is how it works, when agent attaches doccument and approves, it completes workitem and when there is no attachment, it does not complete work item but it does not stop agent by throwing anykind of error message.
I need a error message when there is no atachment found for the workitem and agent tries to approve it. Please suggest how i can get this done ?
Thanks a lot in advance..
Prasu

Hi
There a couple of different ways to accomplish this.
If your not using standard task/methods your able to extend your method. In here just check if a document is attached, display a message with the message statement, or a FM (e.g. TH_POPUP_TO_INFORM), and then call the workflow statement "<b>Exit_Cancelled</b>", by doing this the workitem will stay in the inbox, in status in process until the document is attached.
If your using standard task / Methods, you need to check if a document is attached in the workflow logic, preferably in a condition. Now - if no document has been attached create a loop, and within this loop create a task, for displaying the message. A easy solution here could be a simple decision task with only one Decision, or if you are able to do some ABAP development, create a small method for displaying the message.
In order to make sure that this task/message will popup immediately, create a container element e.g. "Last_Agent", the do a binding from the decision task to the workflow container ActualAgent -> Last_Agent. Now you Last_Agent as the agent for you "Display Message" Task
Regards
Morten Nielsen

Error Message: Some files were skipped during the last operation

Just upgraded to Dreamwever CC ... gettting the following error message when pushing files. Thoughts?

Gurleen,
Windows 7 ... getting the following on FTP log:
The file "/htpre/docroot/css/base.css" was skipped because the old remote file could not be deleted.
The file "/htpre/docroot/css/grid.css" was skipped because the old remote file could not be deleted.
The file "/htpre/docroot/css/topbar.css" was skipped because the old remote file could not be deleted.
The file "/htpre/docroot/css/formalize.css" was skipped because the old remote file could not be deleted.
The file "/htpre/docroot/css/jquery.datepick.css" was skipped because the old remote file could not be deleted.
The file "/htpre/docroot/js/jquery-1.4.4.min.js" was skipped because the old remote file could not be deleted.
The file "/htpre/docroot/css/template.css" was skipped because the old remote file could not be deleted.
The file "/htpre/docroot/css/homepage.css" was skipped because the old remote file could not be deleted.
The file "/htpre/docroot/css/print.css" was skipped because the old remote file could not be deleted.
Need more info let me know.
Thanks,
James

Error: No Entries were Found In the Catelog (IW52)

Hi,
After creatinf the SD Doc from Notification I am trying to send it (Using Send mail from Task, in the Action Box). The task has been created, but when I click on "Send Mail From Task", I get an error, "No Entries....".
Can anyone please suggest a reason/solution.
-Sid
<removed_by_moderator>
Edited by: Julius Bussche on Sep 8, 2008 1:04 PM

Thanks for the reply. Yes, email id is configured.
what is meant by catalog here ?

I am getting a "printing error" message on my Pixma M432 and a lightening icon at the right

I am getting a "printing error" message on my Pixma M432 and the lightening shaped icon in the triangle beneath the stop button is flashing. My documents won't print and are backed up onscreen on my computer. I have turned it off and on. What is wrong?

solution?

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

Lync Topology fails with error (Mutliple Entries were found for type "ms_RTC-SIP-EdgeProxy")

Hello everyone,
After I have finished with Lync FE, Monitoring and Archiving, and WAC server I was going well with Edge server until I got to the point of publishing the topology with Edge Server.
First time publishing went well but I wanted to place the configured IP addresses in the Edge server IP topology with a different IPs and when I published i got the below error.
I tried looking in the trusted Services in Configuration OU using ADSI Edit but never was able to figure out how do I find the duplicated entries? I used also used Softerra LDAP adminsitrator and was able to find 5 values but not sure which one to delete
among them.
Could anyone advise where to look? I'm posting the error as well below
Error: Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local".
▼ Details
└ Type: InvalidDataException
└ ▼ Stack Trace
└
at Microsoft.Rtc.Management.Deployment.AD.ADSessionExtension.FindUnique[TResult](ADSession session, QueryScope scope, ADObjectId containerId, QueryFilter filter, String name, Boolean throwOnMissing)
at Microsoft.Rtc.Management.Deployment.Core.CompatEdgeProxy.Remove(ADSession session, String edgeProxyFqdn)
at Microsoft.Rtc.Management.Deployment.Roles.AccessEdge.GlobalDeactivate(IService service)
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action, T arg)
2/19/2014 12:25:28 PM
Error
└
Error: An error occurred: "System.IO.InvalidDataException" "Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local"."
Mohammed JH

Hi,
Glad to hear you have solved the issue and shared the train of thought.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error message: Page Anchor not found: 188 when exporting to ePub

I have been working on exporting a book from InDesign CC 2014 to reflowable ePub format. The book is about 250 pages long with numerous photographs, all of which are anchored objects. I am now able to export a good-looking ePub file, but I keep getting just this one error message, Page Anchor not found: 188, followed by the pathname for the file. I don't see a problem at page 188, but I'm not very experienced with InDesign. I have done several searches, and I'm not sure exactly what a "page anchor" is. Can anyone help me figure this out? Can I just ignore this error. Thanks.

I had similar problems which were resolved when I anchored images only within text with styles that would not be included in the TOC, and also made sure there were no blank paragraphs (unnecessary hard returns) with a style that would be included in the TOC. Hope that helps.

Idvd5.01 Errors were found during the burning process (Burned Finished)

I've never had this problem before, but i'm trying to burn a dvd after all the media and dvd are ready for burning and when I click on the burn icon the following message pops up: Errors were found during the burning process. I've check to make sure nothing is hanging outside the title safe area. Any suggestion to why I'm getting this error.

Hello, Oscar,
This message can mean several things.
First, are you burning an iMovie or a slideshow or both?
Do you have chapter markers in your movie? Are they on or withing 2 seconds of any transition or at the beginning of your movie?
Does everything encode properly?
Are you able to 'save as disk image'?
Post back with some more details about your project.

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

How to print error messages in browser?

When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?

Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = ABAPLIST
EXCEPTIONS
   NOT_FOUND        = 1
   OTHERS           = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = asci_tab
    listobject         = ABAPLIST
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.

How can I print emails? Printing Error message that no printers are installed. (Printers are installed.)

When I click File > Print, I get a Printing Error message that no printers are installed. Printers are installed. When I click Yes to install a new printer, I receive a new error message that "Windows can't open Add Printer / The local print spooler service is not running. Please restart the spooler or restart the machine." I updated to the new version of Thunderbird 24.6.0. Using Windows 8. I restarted the machine. I confirmed printers are installed using Control Panel. I do not see any way to restart a print spooler. How can I fix this? Thanks.

The print spooler is a windows service and is required to print. I would hazard a guess you can not print with any application.
What I am saying is I think your windows instalation has a problem, not Thunderbird.

Notification print Error message :- No entries were found in the Cataloge T

Similar Messages

Maybe you are looking for