Notification - Reference Date and Time

I require the Reference Date and Reference Time (populated while Completing the Notification) to be available on the Notification Screen in ISU.
Will any config setting allow me to display this field on the Notification screen (IW53)? None of the available Screen Areas seem to have this field.

Hi Abhishek,
The name of the exit is EXIT_SAPMIWO0_020. Its a part of the function group XQQM which is a group containing all Customer Exits QM/PM Notifications.
You can go to transaction se37 and give the exit name. You will see an include named ZXQQMU20. You have to write the code here, inside the include. If system does not allow you to go inside the include and displays a message (yellow warning message at the status bar), then use transaction CMOD, use a project that is currently created in the system or a new project whichever is ok with you. Then click on Enhancement push button. Select the exit name and activate. Now you can write code inside the include ZXQQMU20.
If this helps, <<removed by moderator>>
Thanks.
Bhanu
Edited by: kishan P on Aug 31, 2010 3:25 PM

Similar Messages

Changed date and time and lost reference to proxy files

I had a batch of transcoded proxy files (from a Canon 550d) that had the wrong time on them. I used "Modify > Adjust content created date and time" to shift them by an hour. FCP now reports "Missing Proxy" for all of them. I've checked in the events folder and all the proxy files are still there, it just seems FCP has lost its reference to them.
I can re-transcode them but of course that takes a long time. Two questions: anyone any idea why this happened and is there a way to re-link FCP with the existing files?
Curiously I adjusted the time on some files that had been transcoded from a AVCHD source and these are still OK!
(Using V 10.0.5 on a 2011 MBA with LaCie Thunderbolt disc)

In the end I re-transcoded the files but I think this article may have been the answer:
http://www.larryjordan.biz/fcpx-relinking/

BAPI to change notification task completion date and time

Hi,
I am looking for a BAPI which will modifiy completion date and time of an existing task of a notification.
I was trying with BAPI_ALM_NOTIF_DATA_MODIFY but it doesn't have fields which can modify those fields.
Looking for your help. Can directly update QMSM table
should be a way?
Thanks,
Mainak

Hi,
Use the Method ISUSMORDER.technicalcompletion.
Hope it helps.
KR,
AAL!

Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0. The notification should read the date and time you updated email receiving. Does anyone elsehave this problem?

Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0. Two days later it is still saying Mar 30. The notification should read the date and time you updated email receiving. Does anyone else have this problem? Is there a solution to this?

We want to make sure your phone is in working order Mb_in_NC. I know it can be difficult when you see different times. What is your make/model of your device? When did it start? Do you have a different time on any other applications?
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

As I open my computer, there's a notification telling me to allow these files for a connection, which are very unsual for my mac. I allowed one and my date and time reset to january 1 of 2001. It caused my internet connection to stop working properly.

Please help me figure out what causes my internet connection and airport extreme run erratically. It occurred twice already and my only solution is to reset the date and time, and restart my macbook pro. after that, everything seems to work perfectly again. This is only problem that my macbook pro encountered for two years. Thanks!

Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Microsoft Date and Time Picker Control 6.0 (SP6) errors

One of our functioning VBA projects in Outlook 2010, running under Windows 7 Professional (64-bit), unexpectedly stopped functioning a few months ago. When running the VBA macro we started receiving the compile error message:
"Object library invalid or contains references to object definitions that could not be found"
PROBLEM FORM CONTROL: The message was extremely frustrating because it gave no detailed indication of the source of the problem. With a little research, however, we found that the
Microsoft Date and Time Picker Control 6.0 (SP6), on a userform accessed by the macro, was generating the error. A number of older articles, such as the one included below, indicated that we needed
to re-register the MSCOMCT2.OCX form control, which we did successfully (as did the original author in his question link below). Unfortunately, as the original author found, simply re-registering the form control did not resolve the problem.
UNRESOLVED QUESTIONS:
1. Does anyone know why this functioning control would unexpectedly cease to function?
2. Can anyone help us restore the functionality of the 'Microsoft Date and Time Picker Control 6.0 (SP6)'?
3. How come the form control is listed in the object library, is available in the 'Additional Controls' dialog, and can be inserted into a form, without any indication that it is broken?
SUPPORT ENGINEER RUN-AROUND: Another frustration is that a responding support engineer, in the prior article, keeps referring the author back to this forum, yet the question is apparently never answered back here in
the TechNet forum (which ironically refers us back to the original article in the other forum - a game of musical chairs!).
We suspect that the solution to this problem may be similar to resolving this issue for other similar form controls in other Office 2010 application, not just Outlook. After several years, and a myriad questions on the internet regarding
this exact subject, is there someone who can definitively resolve this issue with this control?
Thank you for any help.
LINK TO THE ORIGINAL UNANSWERED QUESTION (i.e., regarding the MSCOMCT2.OCX control and reference back to this forum):
http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/ms-date-and-time-picker-contol-60-sp-6-w-excel/9b0cc596-5e13-48bc-b03e-13dbfd1c7f9d

Hi,
Would you like to tell me your Excel version number (Go to Account>About Excel). I tested in my version :15.0.4569.1504 and the Date and Time Picker Control 6.0 still could be used.
Then,>> My PC is 64 bit. I believe my version of Office is also 64 bit.<< Office 2013 32 bit also could be installed in 64bit operation system. We could check it with Account>About Excel.
Next, as you said >>After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it. Enabled Macros.
When I tried to use it after reopen, it doesn't work again.<<
I recommend we recreate a new blank Excel file and insert the Date and Time Picker Control 6.0 to test.
If it still does not work well, please try to reinstall and re-registry it. Follow the link:
https://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar
https://social.msdn.microsoft.com/Forums/en-US/91cf3127-70fe-4726-8a27-31b8964430c5/registering-mscomct2ocx-in-64-bit-windows-7?forum=sbappdev
If it works well, I suppose this issue is related to macros. I recommend you post the question to MSDN forum to debug them:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

How to enter a new Date and Time each day in a Numbers Spreadsheet...

Hi... I have finally decided to move away from Excel and really give Numbers a shot... I have an application where each day I first enter the current date and time into a particular cell of a new row and then I enter some data in cells adjacent (in the same row) as that entered date-time. Then the next day I want to again enter the (new) current date and time and add more data next to that new date-time and so forth day after day... You can't use something as simple as =NOW() because then everyday, ALL of the date-times would change to the current time... Nope, now what I want... I just want to be able to EASILY and QUICKLY enter the current date-time value in one call and then have that specific value stay there forever... In Excel, this is accomplished with the keyboard shortcuts of
<cntl> followed by a semicolon (;) for the date
then enter a single space (for separation of date versus time) followed last by
<command> followed again by a semicolon...
So all together that is,
<cntl><;><sp><command><;>
and that puts something like
4/10/2010 9:49:00 AM
in a single cell...
That's what I now want to be able to do in Numbers...
How do I do that??? Do I use the menubar item "Insert Date and Time" and if so, how exactly do I get the current time to show up in the chosen cell??? With formatting??? Is there a keyboard shortcut method like the one I mentioned that works for Excel?? I've perused the manual and though I found lots on date-time, I didn't see how to do specifically what I want to do... I likely just missed it as surely it must be easy to do...
Any feedback would be much appreciated... thanks... bob...

Badunit wrote:
The result of running that script is "UI Enabled = TRUE".
I have cells named by the header values.
This may be the problem.
The script is an old one which deciphered only the letter+digit cell references.
Here is a new version which works with every kind of cell reference.
--[SCRIPT insertDateTime]
Enregistrer le script en tant que Script : insertDateTime.scpt
déplacer l'application créée dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Placez le curseur dans la cellule qui doit recevoir la date_heure
menu Scripts > Numbers > insertDateTime
La cellule pointée reçoit la date_heure.
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++
Save the script as a Script : insertDateTime.scpt
Move the newly created application into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Put the cursor in the cell which must receive the date_time.
menu Scripts > Numbers > insertDateTime
The pointed cell receives the current date_time.
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Yvan KOENIG (VALLAURIS, France)
2009/03/01
2010/04/11 is now able to treat every kind of cell references
property theApp : "Numbers"
--=====
on run
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
my doYourDuty(colNum1, rowNum1, tName, sName, dName)
end run
--=====
on doYourDuty(c, r, t, s, d) (*
c = columnIndex
r = rowIndex
t = table's name
s = sheet's name
d = document's name *)
local cdt
set cdt to my cleanThisDate(current date) (* the new date_time as a clean date_time *)
tell application "Numbers" to tell document d to tell sheet s to tell table t
set value of cell r of column c to cdt as text
end tell -- application …
end doYourDuty
--=====
on cleanThisDate(dt)
(* ugly code but once I got date_time with milliseconds so if necessary, I drop them *)
local l
set l to my decoupe(dt as text, ":")
if (count of l) > 3 then set dt to date (my recolle(items 1 thru 3 of l, ":"))
return dt
end cleanThisDate
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on parleAnglais()
local z
try
tell application theApp to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
It's available on my idisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:for_Numbers09:insertDateTime.zip
Yvan KOENIG (VALLAURIS, France) dimanche 11 avril 2010 14:16:41

Can I get MJD (date and time) in LabVIEW 2012 SP1?

I need to time stamp my data before sending it to the file. I have been doing this with the standard calendar date and time but MJD is what we prefer to use. How can I get an MJD timestamp in LabVIEW 2012 SP1?
Solved!
Go to Solution.

Hello Brad_Henry,
The Format Date/Time String will return the day of the year when the %j argument is used, as per this help document:
LabVIEW Help: Format Codes for the Time Format String
http://zone.ni.com/reference/en-XX/help/371361J-01/glang/codes_for_time_format_str/
If you're looking for the actual MJD, I'm not aware of a built-in function that generates this so you'll probably need to create or find a function to calculate it manually. This should pretty basic arithmetic, and it looks like people have already made a few public examples, the first two search results here look to be just about what you need:
ni.com search:
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:ex/q/julian/
Regards,
Tom L.

Inserting automatic file name, date and time in Illustrator CS3?

hello all,
is there an option in Illustrator where you could automatically insert inside your file the file name, date and time where it was last created or modified, etc.
I found this option to exist in InDesign, but could not find the same menu in Illustrator. I am using CS3.
help?
thanks a bunch.

Mario,
would you please be so kind to include a reference on your site about the script? As far as I can see, the PutDateandTime.js you are providing here is a copy or a slightly modified copy of the original script that Wolfgang Reszel has provided on our site for about four years.
It is okay that the script is available on your site, but please not without a reference. Thanks.

How do you date and time stamp pictures and videos using a EOS Rebel T3?

I am needing to utilize date and time stamping on videos and photos in my work. The pictures and videos must display time, a date, and reference number. I have gone through the cd, owner's manuel and software manuel and I am unclear if I can perform this function.

While this is a relatively common feature on point & shoot cameras -- where the photo is thought of as a snapshot to document a memory in a person's life, among DSLR cameras it's not very common (I don't actually know of a DSLR that does this though I don't doubt that it may exist). DSLR users are usually expecting a higher quality image -- so now the image is thought of more like art and less like a snapshot and the date/time in the corner distracts from the image. Also they tend to be more advanced users who would be able to modify the image themselves so they have little need for such a feature.
The camera does record the date & time... but it's in the EXIF data (information recorded into the image file but not displayed).
SO... there are programs that will just do this. You'll need to do a search (I found several but have never tried one so I can't vouch for them). I think there are Photoshop plug-ins that do this (assuming you have Photoshop). These programs allow you to define the info you want printed (including EXIF data such as date/time) and you get to pick the location, font, size, color, etc. and ultimately the location on the image where you'd like the info displayed. They then add the info visibly onto the image for you and most support "batch" use (e.g. drop a whole folder of images on it and they'll do them all.)
Tim Campbell
5D II, 5D III, 60Da

I'm trying to display the current date and time on my iPad.

First, I'm not sure this is a valid post to this forum. If not, I'd appreciate knowg in where I can get help.
I have tried several ways to display the current date and time on my iPad. None work. Most things I try give me complier errors but the latest code compiles but won't display the correct time.
Here's the dispatch code in my ViewController.m file:
dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_HIGH, 0ul);
    dispatch_async(queue, ^{
        [NSTimer scheduledTimerWithTimeInterval:NSTimeInterval)1.0f target:self selector:@selector(updateLabel:) userInfo:nil repeats:YES];
Here's the updateLabel code: (which never gets executed).
- (void)updateLabel:(id) sender {
    dispatch_sync(dispatch_get_main_queue(), ^{
    NSLog(@"Datefield Update Called");
    NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init];
    [dateFormatter setDateFormat:@"EEEE, MMMM dd, yyyy 'at' HH:mm ZZZZ"];
    NSDate *dayTime = [NSDate date];
    NSString *formattedDateString = [dateFormatter stringFromDate:dayTime];
        _dateField.text = formattedDateString;
    [self.view addSubview:_dateField];
    NSLog(@"Datefield %@",_dateField.text);

Your code is needlessly complicated and has a few problems:
// These objects should be created only once.
NSTimer *dateAndTimeTimer; (You might need to make this a property with a strong reference).
NSDateFormatter *dateFormatter = [[NSDateFormatter alloc]init];
[dateFormatter setDateFormat:@"EEEE, MMMMM dd, yyyy 'at' HH:mm ZZZZ"];
// The subview should only be added once.
[self.view addSubview:_dateField];
[self performSelectorOnMainThread:@selector(startDateAndTimeTimer)
                        withObject:nil
                     waitUntilDone:YES];
-(void)startDateAndTimeTimer
    NSTimer *timer = [NSTimer scheduledTimerWithTimeInterval:1
                                                      target:self
                                                    selector:@selector(updateLabel)
                                                    userInfo:nil
                                                     repeats:YES];
    dateAndTimeTimer = timer;
    [[NSRunLoop mainRunLoop] addTimer:dateAndTimeTimer forMode:NSRunLoopCommonModes];
-(void)updateLabel
     NSDate *dateTime = [NSDate date];
     NSString *formattedDataString = [dateFormatter stringFromDate:dateTime];
     _dateField.text = formattedDateString;
     NSLog(@"_dateField.text=%@", _dateField.text);

How to compare date and time together

Hi,
How to compare Date and Time together?
For example in a database table there are two fields rundate and runtime. I want to compare these two with perticular date and time in the program. Like, I want to pull all the records where the records's date and time are less than a perticular date and time in the program.
Hope the question is clear...
Thanks.
Kavita

Hi Kavita
There is no as such Date and Time Comparision FM in Standard SAP But You can define your own like this
<b>FUNCTION ZAV4_COMPAREDATETIME.
""Lokale Schnittstelle:
*" IMPORTING
*"     REFERENCE(DATE1) TYPE DATS
*"     REFERENCE(TIME1) TYPE TIMS
*"     REFERENCE(DATE2) TYPE DATS
*"     REFERENCE(TIME2) TYPE TIMS
*" EXPORTING
*"     VALUE(TWOISMORETOPICAL) TYPE C
twoismoretopical = ''.
if date2 > date1.
    twoismoretopical = 'X'.
else.
     if date2 = date1 and time2 > time1.
       twoismoretopical = 'X'.
     endif.
endif.
ENDFUNCTION.</b>
Regards
Mithlesh

"RT Set date and time" does not set seconds in UTC mode

Hallo,
I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the "Set Date and Time" vi. But the seconds I enter are ADDED to the current time and not set as new value.
Even the vi shows this behaviour: I set up a vi in which the time is set in a loop (100ms delay) and read again. When I set local time the clock stops (as expected) but when I set the UTC time the seconds keep on running...
Can anybody help me with that problem???
Thanks
Florian
Solved!
Go to Solution.

Hi Andreas,
well it does not matter if I set a time zone in the MAX or not. In my example I was working on UTC + 0 but even when I set it to my local time (UTC + 1) I get the same behaviour modified by one hour.
My LabView Version is 8.5. In in the MAX under Software-> LabView-RealTime it says that I am using 8.5.0.
I suspect that the settime.out which is installed on the cRio is probably the root of the problem as VxWorks itself does not offer a function (at least I did not find one) to convert from broken down system time to system time in seconds. There only exist one to convert from broken down local time to system time in seconds ( mktime() ). The reverse function is available for both cases: gmtime() and localtime(). I also did not find a way to find out the offset of the local time. So I have to use the library function settimeUTC() from settime.out.
As I offered I can send you the settime.out file from my cRio for reference or maybe you can tell me how to find out what the version of the file is. It seems not to be an ELF file as I looked inside it to find some timestamp or version info...
Thanks so far
Florian

Date and Time on Menu Bar

Up until now the date and time has been displayed on the menu bar as...
Tuesday, November 28, 2006 8:09 AM
Now, for some reason, it's being displayed as...
Tue 8:09 AM
Here's what I've tried in trying to restore the format...
1) System Preferences > Menu Bar Clock > Show Date and Time in Menu Bar
2) Deleted the following preference files:
com.apple.MenuBarClock.plist
com.apple.systempreferences.plist
com.apple.systemuiserver.plist
Does anyone know how I can restore the format?
Thanks!
eMac Mac OS X (10.2.x) 128 MB, 700 MHz PowerPC G4

It looks like there can be as little
as 6 or so characters between the two sets of
icons
That sounds low, especially in
the Finder, even at the lower screen resolutions. I
just played with stepping down resolutions on this
Mac, and various right-side icons (the CoreServices
eject.menu, Display, Classic, and sound icons, plus
those from MenuMeters) disappeared
before the date and time (shown as "Tue 28 Nov, 04:00
PM" were affected (right-side menu items are
truncated from left to right).
In my case, just the date disappeared. So instead of seeing...
Tue November 28, 2006 5:43 PM
...I was seeing...
Tue 5:43 PM
The icons to the left (on the right side icons) were still there and unaffected.
What Display
resolution do you normally use?
It's set at 1024 X 768.
Does the time&date
format go back to the expected form if you increase
resolution to maximum as a test? If the format
affected by starting up in Safe Mode?
After trying the remedy you reference in your previous post, the format is back to where it was so I won't be able to test it. But I guess you suspect that the Date and Time was truncated because there wasn't enough space between the left side and right side icons, is this right? It would seem like a logical explanation...

Notification - Reference Date and Time

Similar Messages

Maybe you are looking for