Notification to a group

Hi,
I know notification can be set to users, group and roles (in portals). Can notification be set to a group from active dir?
Thanks,
Mandar

Hi Mandar,
this is only possible if the ADS group is mapped in any way to a portal group or role. The API used by teh notifictaion is service is the UME which only is an abstract level acces to suh kind of objects.
Regards,
Thilo

Similar Messages

Unable to create a notification for a group (Cisco Unity Express 3.2)

There is Cisco ISR 2821 with CME 7.1 and Cisco Unity Express 3.2.
I am trying to create notifications for a group named AAA in CUE.
I do following (GUI):
1. Go to Configure -> Groups
2. Click on the group name AAA.
3. In Group Profile window 'Enable notification for this user/group' option is enabled.
4. Go to Mailbox tab. There is an associated mailbox with ticks against Enabled and Fax Enabled.
5. Go to Notification tab and see the warning:
No Notification Devices found for User/Group
Also, there are another several groups on this system and I am able to turn notification on for them. These groups have the same owners and members that AAA has. Moreover, if I create a new group and set it up absolutely the same as AAA, I can turn notifications on for it.
The problem in this way is that we have our custom greetings and after I created a new group, for example BBB, with the same settings (as AAA, inluding Primary Extansion and Primary E.164 Number) and remove these numbers from AAA, then it works and users would receive notification about new voice messages. BUT, when I call BBB I listen to standart Cisco greeting promts.
I don't undestand why it happens, because all these greetings are determined in Voicemail -> Auto Attendant section and I did not any changes here at all.
How can I fix this 'notification' problem?
Thanks.

Process with success:
unzip the packet in: C:\APEX
1. Install:
@apexins SYSAUX SYSAUX TEMP /i/
2. Change to password:
@apxchpwd,
3. Run apex_epg_config.sql
On windows:
@apex_epg_config.sql (page 30, the guide of intallation)
Important:Replace SYSTEM_DRIVE:\TEMP by C:
E.g.: @apex_epg_config C:
After this, follow the next steps
4. ALTER USER ANONYMOUS ACCOUNT UNLOCK;
Finish! Just execute apxldimg.sql script if you is upgrading from a preview release.
Now try the connect on the browser IE6 o later:
http://localhost:8080/apex/apex_admin
Then create your workspace.
Edited by: [email protected] on 10/03/2009 11:59

Error in notification- Wrong Code group displaying

While creating Notification, we can assign codes for defect loc, def type and causes. After that, If I go in change mode of same notification, code group for defect type and causes are default taking as code group assigned for defect location.
Also the code group for defect type and causes are not even displaying in screen.
But the data for defect location is showing everything fine, means code group, codes.
Summary:
In QM02- Change Notification
Defect Location:
Code group- Correctly displaying whatever assigned during creation of notification
Defect Loc code: Correctly displaying
Def Loc description- Correctly displaying
Def Type:
Code group- Displaying same code group of def location
Defect type code: No display
Defect type description- No display
Causes:
Code group- Displaying same code group of def location
Causes code- No display
Causes description- No display
Did anyone faced the same issue before. If so plz ley me know
Thanks
Vineeth

Closed, enhancement done in PM Notification caused this error. Internal error. Solved

Notification to Mail group

Hi All,
In 12.1.3 we are using the IBE_CUSTOMER responsibility to create the New Item Reqeust. After submitting the request, notification was not sent to the user groups.
No entries also available in WF_NOTIFICATIONS.
But the same New Item Request raised from Development Manager responsibility at that time the notifiction was sent to the mail group.
Is there any profile based setup need to completed for achieve this task from that particular responsibility.
Please help me to resolve the issue.
Thanks in advance.
Regards,
Sathyaseelan

please check below link
http://amarsreddi.blogspot.com/2013/03/alert-configuration-step-by-step-process.html
in below link in fixed recivpient add the people who u need t send email
http://scn.sap.com/community/pi-and-soa-middleware/blog/2005/09/09/xi-alerts--step-by-step
Thanks,
Sreenivas

BPMOn: Is it possible to send email notification to different groups based on filter value for IDOC?

Hi there,
I have setup the monitoring for idoc through interface monitoring and I am getting the alerts for the same. The alert is generated for different status values for the same idoc. Now my question is, is it possible to send email notification to two different groups based on the status values?? I mean for example , for a single idoc for some status values I want to send email notification to group1 only and for other status values I want to send notification to group2.Any help will be apperitiated.
Thanks and regards,
Rutvik Upadhyay

We currently do not support that level of control for sending email notifications. If you think others are interested in this you should add an idea here: http://forums.adobe.com/community/formscentral?view=idea
We use that to help us prioritize our work.
Thanks,
Randy

Push notifications for facebook groups wont work

I got push notifications turned on in a few groups on facebook, It used to work but all of a sudden it stopped and i don't know what made it stop, Didn't do anything with the phone the fday it stopped working. it works from a friend of mine that has all the exact same settings activated, Is this a know issue ? And does anyone know a fix for it ?

May want to contact Facebook as they are the developers of the app and may either know of this bug or if not, would like to hear about it.

PM Order & Notification link -Transfer group codes of damage

Hi Experts
I am facing an issue, when work order is created directly automatic from the PM notification;
the following fields of
Code Group of Problem as well as the
Code Group of Causes
assigned to the tag "Catalogs" from the PM Notification
are copied directly to the PM order HeaderData tag in the subscreen "Damage" tag;
but the Code Group of Activities and the corresponding code are not copied to the PM order;
Is there any BADIs/User-Exits that allow to copy and enable these fields in the PM order?
Thanks
Andres Catalan

Hello Andres,
To my knowledge, there is no enhancement way of adding a field into this standard subscreen. Also unlike Notifications we can not add custom screen areas to the tabs of Order. So, to have custom user fields (in your case Activity), you need to add Enhancement tab through user exit IWO10018. And write your codes in user-exit like IWO10009 or otherwise, to have the Activity value into this field.
KJogeswaraRao

Notification when a group of jobs complete

I have a large number of jobs that I run using a cursor (All jobs start with PS_ and each job loads a single table from ORACLE) so they can run in parallel. I want to be able to be notified when the last job completes. Should this done using
a trigger? Or should I just add a loop statement to the stored procedure that fires this job? I know which individual takes the longest and I could simply just add a notification to send email on success but I want it to be more robust. Below
is what I am using to trigger the jobs.
Thanks in advance!
BEGIN
SET NOCOUNT ON;
DECLARE @year CHAR(4)
DECLARE @month CHAR(2)
DECLARE @day CHAR(2)
SET @year = CAST(DATEPART(YEAR, GETDATE()) AS VARCHAR)
SET @month = CASE WHEN LEN(CAST(DATEPART(MONTH, GETDATE()) AS VARCHAR)) = 1
THEN '0'+ CAST(DATEPART(MONTH, GETDATE()) AS VARCHAR)
ELSE CAST(DATEPART(MONTH, GETDATE()) AS VARCHAR)
END
SET @day = CASE WHEN LEN(CAST(DATEPART(DAY, GETDATE()) AS VARCHAR)) = 1
THEN '0' + CAST(DATEPART(DAY, GETDATE()) AS VARCHAR)
ELSE CAST(DATEPART(DAY, GETDATE()) AS VARCHAR)
END
DECLARE @job_name NVARCHAR(255)
DECLARE cur CURSOR
FOR
SELECT name
FROM msdb.dbo.sysjobs X
WHERE SUBSTRING(X.name, 1, 3) = 'PS_'
OPEN cur
FETCH NEXT FROM cur INTO @job_name
WHILE @@fetch_status = 0
BEGIN
CURSOR_START:
--if the job has not completed
IF ( SELECT COUNT(*)
FROM sysjobhistory
WHERE job_id = ( SELECT job_id
FROM sysjobs
WHERE name = @job_name
AND step_id = 0 --job outcome
AND run_status = 1 --0 = failed 1 = success
AND run_date = @year + @month + @day
) = 0
AND
--and the job is not currently running
( SELECT COUNT(*)
FROM sysjobactivity
WHERE job_id = ( SELECT job_id
FROM sysjobs
WHERE name = @job_name
AND CONVERT(VARCHAR(10), start_execution_date, 111) = CONVERT(VARCHAR(10), GETDATE(), 111)
AND stop_execution_date IS NULL
) = 0
BEGIN
IF ( SELECT COUNT(*)
FROM sysjobactivity a1
INNER JOIN sysjobs a2 ON a2.job_id = a1.job_id
WHERE CONVERT(VARCHAR(10), start_execution_date, 111) = CONVERT(VARCHAR(10), GETDATE(), 111)
AND stop_execution_date IS NULL
AND SUBSTRING(name, 1, 3) = 'PS_'
) < 10
BEGIN
PRINT 'EXEC msdb.dbo.sp_start_job @job_Name='
+ CAST(@job_name AS VARCHAR)
EXEC msdb.dbo.sp_start_job @job_Name=@job_Name
WAITFOR DELAY '00:00:10'
END
ELSE
BEGIN
PRINT 'WAIT 10 jobs already running: EXEC msdb.dbo.sp_start_job @job_Name='
+ CAST(@job_name AS VARCHAR)
WAITFOR DELAY '00:00:10'
GOTO CURSOR_START
END
END
ELSE
BEGIN
PRINT CAST(@job_name AS VARCHAR)
+ ' The job is already currently running or completed sucessfully today'
END
FETCH NEXT FROM cur INTO @job_name
END
CLOSE cur
DEALLOCATE cur
END

You can store all jobs name in a table variable or temp variable which you want to monitor and then use below code (this code is just for one job name)
DECLARE @JobStatus INT
SET @JobStatus = 0
EXEC MSDB.dbo.sp_start_job @Job_Name = 'JobName'
SELECT @JobStatus = current_execution_status FROM OPENROWSET('SQLNCLI', 'Server=localhost;Trusted_Connection=yes;',
'EXEC MSDB.dbo.sp_help_job @job_name = ''JobName'', @job_aspect = ''JOB'' ')
WHILE @JobStatus <> 4
BEGIN
SELECT @JobStatus = current_execution_status FROM OPENROWSET('SQLNCLI', 'Server=localhost;Trusted_Connection=yes;',
'EXEC MSDB.dbo.sp_help_job @job_name = ''JobName'', @job_aspect = ''JOB'' ')
END
SP_Help_Job provides the status of the job
Value
Description
0
Returns only those jobs that are not idle or suspended.
1
Executing.
2
Waiting for thread.
3
Between retries.
4
Idle.
5
Suspended.
7
Performing completion actions.

Notifications from a shared mailbox calendar to a group of people

HI
When a member of staff books a meeting . They add meeting room support as an attendee of the meeting if they need IT assistance .
I would like the meeting room support to be a shared mailbox or calendar that sends notifications to a group of people when a meeting is going to start as if it was in my calendar .
The problem is at the moment we have to accept all meetings to get that notification , so my presence and other members of the groups is always set to busy
We are using Outlook 2010 . I read somewhere that was a new feature of 2010 and wasn't a feature of 2007 . Can somebody just clarify that this is possible and how best to do it
Thanks
MM

Hi,
There is no such build-in feature in Outlook. As you mentioned, you can accept a meeting and then you will get the notification, this is how it works.
Regards,
Melon Chen
TechNet Community Support

FYI notification to group of people in SSHR

We want to send a FYI notification to a group of people if the employee change his/her name. we are using 11.5.10cu2 AME.B. How do I acheive this functionality?
TIA!

Notifications have to be send to a person who has a USER on the system. To participate in SSHR workflows, the USER must also have a valid PERSON record in HR. Unless these 2 conditions are satisfied, you cannot send a notification to someone. The only option I can suggest is either an ALERT or you change the workflow so that an EMAIL is sent with the contents of the norification.
As long as your system does not prevent the sending of emails outside your domain, you can send emails to any email address.
Hopt that helps.
Regadrs
Tim

Controlling same Notification Types against few Planner groups

Dear Experts,
We have four groups of Maintenance Team (Mec, Ele, Inst & Civ) which are controlled against four roles to create same Notification types. The control factor is planner group which are linked against their required role and it is working fine to create notification (IW21) for their specific group.
The problem which we are facing is, change mode of Notification, Mech planner group team can change the details of Notification in Elec group as
same Notification types are used by 4 groups. Is there any way to restrict for the change authorization (IW22) in Notification as four teams are following four differernt roles.
Regards,
Sahu

Ajaya,
Check the values in Authorization Object I_QMEL. (PFCG tcode of the respective Role) See the picture below. Assume this is your role for Civil Notification type (CE). It should look like this.
Also, try by removing the values in TCD field in other authObjects of this Role.
One more possibility is
Some Role other than this specific Role is enabling the user for IW22. This role might have been assigned to all these 3 users. You need to trace this and remove or modify the role.
This problem is a typical one often seen to be associated with AuthObjects, This can be managed by investigation.
A last resort method can be to manage this through user-exit QQMA0014. This is possible.
KJogeswaraRao

EMail notification - While uploading any document in portal application

Is there is any way to send an email notification to the groups of users, while user is trying to create any sub pages / adding new document in oracle portal application?
--Balaji

Below link helps me to configure CMEF in portal application
http://www.oracle.com/technology/products/ias/portal/pdf/portal_cmef_bpel_integration_technote.pdf
--Balaji S

How to send location based push notification

How to send notification from website to the devices in particular latitude and longitude

I assume you mean you want the backend to send push notifications to a group of devices based on their geographical location?
In that case each device needs to register at startup with the notification service (Windows, Apple, Android, etc.), and get a handle, then register the information (along with its unique identification, such as account or phone number) with
Azure's notification hub. It also has to send its geographical location and the backend needs to keep this information somewhere (in a table, for example). The device needs to periodically update the backend for its new location. When the backend has the need
to send push notifications based on device's geographical location (based on a rectangular grid for example), then it has all the information to do it.
Frank

Notification issue:wf_notifications mail_status is null, status is CANCELED

Hi All,
In our HR systems, we use workflows extensively and in one of our custom workflows we send a notification to one group mail box. The FND_USER is defined and the group mail box address is given correctly.
In the workflow we recursively send notifications to that user as long as there are some unprocessed records in our custom table. The issue now is the users claim that the mails are not received by them in our live instance. While debugging we noticed that the mail_status is null and status is CANCELED for this particular workflow always.
I checked the following and they are correct:
1. Notification 'On Revisit' parameter set to 'Reset'
2. Checked in fnd_user and wf_local_roles, the user is active and the email id is correct there
3. No timeout parameters set for this notification
P.S. Notifications to this user are sent properly when sent from some other workflows. So not sure whether something is missing in the above workflow process.
It is really strange that the notification status is CANCELED. The begin and end date are same for such notifications. So these are not canceled by some abort process activities.
Please suggest.

Please post the details of the application release, database version and OS.
In the workflow we recursively send notifications to that user as long as there are some unprocessed records in our custom table. The issue now is the users claim that the mails are not received by them in our live instance. While debugging we noticed that the mail_status is null and status is CANCELED for this particular workflow always.
I checked the following and they are correct:
1. Notification 'On Revisit' parameter set to 'Reset'
2. Checked in fnd_user and wf_local_roles, the user is active and the email id is correct there
3. No timeout parameters set for this notification
P.S. Notifications to this user are sent properly when sent from some other workflows. So not sure whether something is missing in the above workflow process. Can you find any errors in the Workflow log file?
It is really strange that the notification status is CANCELED. The begin and end date are same for such notifications. So these are not canceled by some abort process activities.
Please suggest.How To Troubleshoot Java-based Workflow Notification Mailer [ID 242941.1]
Troubleshooting Workflow Java Notification Mailer - Technical Reference [ID 1191125.1]
A Guide For Troubleshooting Workflow Notification Emails - Inbound and Outbound [ID 831982.1]
Oracle Workflow Release 12 Diagnostics [ID 469822.1]
OWF H Diagnostics, Solutions and Information [ID 332152.1]
Thanks,
Hussein

Email notification or remedy ticket creation if BI services fails

Hi All,
we are using OBIEE 10.1.3.4.X version as our production instance.
we want to set up email notification for a group if any of the BI services fails ( presentation services, Javahost service, Scheduler service etc ). We have 2 unix servers where we check the current status of above services.
Can anybody provide me information to do the same in Unix. I heard like we can write Unix script and that can be placed in Unix box to meet above requirement. Was any body faced similar issue, any body have successfully implemented to your projects.
How will you get notified if you are suing obiee 10g in your projects
Please let me know your thoughts.
Regards,
Yuva

Hi ..
Above mentioned weblinks gives information on OBIEE 11g. We are using OBIEE10g.
It would be helpful, if anybody provides information on getting email notification if any of BI services fails. I guess, as all the BI services are maintained by Unixbox, we need to write Unix script for the same.
Thanks and Regards,
Yuva

Notification to a group

Similar Messages

Maybe you are looking for