Notification to the standard task.

Hi all,
i use the standard task '17900102' which create workitem .
i want to send some notification along with the workitem.
how to do in the standard task.

Hi
Notification - Just information
Workitem- Executable.
if you wanna change workitem text .it can be changed via PFTC transaction right
regards
Muthu

Similar Messages

How to create a custom task in SRM for the standard task

Hi Gurus,
How to create a custom task in SRM for the standard task eg: TS10407929
regards,
George.

from PFTC itself. Same.

How can i add one field in the container for the standard task-90310004?

Hi,
Please let me know thw steps to add one field in the container for the standard task-90310004.
Usefull suggestions will be rewarded.
Regards,
Neslin.

<b>Hi,
Containers are used for holding Application data for Workflow purposes.
Event container
Task container
Workflow container
Role container
Binding is the linking of data from one container to the other for making data available all across the workflow.
But you can get values from one container to another container like this
Container(Con)
1. WF Con to Role, Wf con to task con, Wf con to event
and
2. Event con to wf con, task con to wof con
and
3. Method con to task con
and
4. Task con to method con
So, we don't have direct possible binding from task con to task con.
Thanks and Regards,
Prabhakar Dharmala</b>
Message was edited by:
Prabhakar Dharmala
But you can do pass values from first task con to wf con and again from wf con to another task con

When someone modify the coding in the notification, a new notification with the same task is created (QM02)

Hi,
When someone modify the coding in the notification, a new notification with the same task is created (QM02).
How to stop this duplicate notification?
Regards,
Shiva

Hello Shivasharanappa,
This is due to your Inspection type configuration. I guess "One Q-Notification per Insp. Lot" Indicator is not set for the inspection type you are using.
Go to QCC0>Quality inspection>Inspection Lot Creation>Maintain Inspection Types>Select Inspection type
Here, Set indicator for "One Q-Notification per Insp. Lot". If this indicator is set system will combine all newly added defects into previously created notification.
Amol.

Users as other task owners are receiving 5 emails notification for the same task

users as other task owners are receiving 5 emails notification for the same task in Sharepoint 2010. I have tried to add a 5 minutes delay on the other task owners workflow with no luck.any suggestions? Thanks

The Book confuses me. I still think assignment delay and leveling resources are the same. Here is the explanation from the book for the three concepts.
" Project offers two types of delays:
Leveling delay. This type of delay applies to tasks; it pushes out the start date for the task and all its resource assignments. It’s meant specifically for remov-ing resource overallocations. With the Leveling Delay field, you can remove
all leveling delays by choosing Resource➝Level➝Clear Leveling.
Assignment delay. This type of delay applies to a single assignment within a task. Suppose you have a security consultant coming in to help lock down your site. However, your employees have prep work to do before the consultant can get started.
You can assign everyone to the same “Try hacking into office” task but delay the consultant’s assignment by 5 days. "
After a couple of pages;
" Leveling Resources
In Project 2010, you can level the entire project, tasks you select, or a single resource. By leveling several tasks that are all vying for the resource, or alternatively, leveling only the most in-demand resources, you can focus on the problematic
portions of your project. Project automatically chooses popular settings in the Resource Level-ing dialog box. In most situations, you might as well run Resource Leveling with these settings. You can undo the leveling if you don’t like the results, but you
can get some clues from the initial results to help you determine the settings you need. Here’s how to level different parts of your project using the leveling settings cur-rently in place:
Level a resource. Select the resource you want to level, and then choose Resource➝Level➝Level Resource"

Edit the standard task mail Text

Hello Experts,
Could any one help me to change the text for the standard task mail content. Here I am applying a loan and approver approves the task this generates the mail and mail is being received. But I need to change the content of that mail as per my BP. Where can I find to change the content.
Thanks & Regards
Kannan
Edited by: Kanna83 on Dec 13, 2011 6:04 PM

Hello,
If you know which workflow is sending the mail, then use e.g. PFTC_DIS to look at the workflow and figure out which task (TS....) contains the text. In some cases SAP lets you customise the text in the standard task, otherwise you could create a custom task and replace it (the standard task).
If you don't know which workflow it is, look in SWI1 at the time the mail was sent.
regards
Rick Bakker
hanabi technology

How to format the Workflow standard task description

Hi experts,
I am trying to put an SAP icon in the Workflow standard task description. But it is not appearing.
Also, is there any way to change the color and font of the text entered in the the description of the standard task?
To put an icon, i am following the steps mentioned below:-
then I am choosing a particular Icon, and its corresponding code comes in the editor, <718> in this case.
But the output does not show any Icon.
Please advice.
Thanks

Hi argadip,
Please help me tooo...
Task has been transported from develpment client to another client for integration testing.
in the shopping cart advice product has been created by the employee.
then it goes to advisor for the approval
This has been done by the workflow.
It is implemented in both dutch and english.
English - it is working fine.
Dutch - the task is not defined.(the code is missing)
after transporting , we did changes in the task created for implementing this approval description.
It was working fine in both dutch and english.
But the corrections in the code are there....
only in the output After transported to another client dutch part approval description is not correct some part of it are missing
Is the problem related to the transport or with the modifications of task defined ??
Can anyone suggest me how to solve this problem.

Removing the user from standard task group

Experts,
I need to remove the one user from the standard task "Display MC Document (outbound w/o IDoc)". Since it is a standard task I'm not able to make any changes.
I hope I need to change in the agent which is assigned to this task. But donno how to find the agents assigned to this task.
Please help me in resolving this.
Thanks,
Naveen

Hi Naveen,
If that user assigned as the 'Possible agent' of the task then you can remove the user easily.
In the workflow template, go that activity. Under the Task ID there is a option called 'Agents' and click that icon to open. In the new screen, the possible agents of this task will be displayed.
Select the desired user and delete it.
Thanks,
Viji.

How to trigger standard task manually in Process controlled workflow?

Hi All,
I would like to trigger a task mannually in BRF, process controlled workflow. My requirement is to send an approval notification to the approvers at the current approval level, at any instance by the requestor of the shopping cart. In that case, will it be possible to trigger the standard task 40007953 (SRM Shopping Cart Approval (1)) with the workitem of Shopping cart under consideration?
I have tried searching for the same in SDN and other forums but most of the information was regarding application controlled workflows. None of those function modules seems to be working in PCW.
Any pointers on how to trigger a standard task (using FM or code) in BRF(process controlled workflow) environment is also highly appreciated.
Thanks,
S.H@ri

Hi,
Use this FM [SAP_WAPI_START_WORKFLOW|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/bb9100f8-0c01-0010-ac8e-e017351f3fc1].
Regards,
Surjith

How to use save data in Background by using standard task?

Hi,
I have worked with PD Process for PD. I try to find background process to run after manager approve. I use the standard task 17900108 but it seem does not work. What should I did before I use this standard task?
Please help me out how to use this standard task.
Thanks a lot,
Regards,
Visut

Hi All,
Thanks for your reply. Actually the key word of my case is I put the class in Program Exit instead of let it blank. The standard task that I use is 17900108.
I can use it to update data now....
But it seem does not update to DPF (Digital Personal File). Anyone has idea why it does not?
Thanks again.
Regards,
Visut

Problem in standard task TS20000139 in quality

Hi friends
The task TS20000139 is used for sending reason for rejection in my travel request workflow. Its working fine in development but after transporting to development when rejection button is clicked below task TS20000139 is not opened, it immedietly closes and comes to inbox when i try to click that workitem its not opening. Am using standard task only. This problem is only in quality. Can any one point the solution.
Regards
vijay

Hi
I think the problem is solved. Now its comming correctly. i dont the what is the problem what i was going on clicking the workitem suddenly it opened. Now i tested with 10 rejection now its working fine.
There is another problem exist. I have copied the standard task TS20000118 and in this task there is an attachment. But this attachement is not opening in quality. But in development is working fine.
Regards
vijay

Combine standard task (ABAP method call) and additional UWL Action Handlers

Hi, i have defined a task with an asynchronous ABAP method call and a terminating event which i want to use "as is" in the universal worklist, that means that the standard action has to be the ABAP method call defined for the task.
In addition to that i want to add an extra button to the workitem view in the worklist which opens a web dynpro application. The web dynpro needs a parameter from the workitem container. Opening the web dynpro is not required for completing the task, so i do not consider using secondary methods.
I created an UWLConfiguration for the task type without defining the defaultAction attribute, since defaultAction should not be overwritten. I wanted to use SAPWebDynproABAPLauncher to generate the button since i can easily include values from the workitem container in the call.
When executing a workitem from the worklist the ABAP method call is not performed, instead a window opens which just displays the workitem. The button to web dynpro is generated and works fine.
Does anyone have a clue how i can use UWL to define an additional button with SAPWebDynproABAPLauncher without overwriting the standard task definition?
My definition:
<ItemTypes>
    <ItemType
name="uwl.task.webflow.TS95100103"
connector="WebFlowConnector"
defaultView="DefaultView">
      <ItemTypeCriteria
systemId="ED1CLNT100"
externalType="TS95100103"
connector="WebFlowConnector"/>
      <CustomAttributes>
        <CustomAttributeSource
id="WEBFLOW_CONTAINER"
objectIdHolder="externalObjectId"
objectType="WebFlowContainer"
cacheValidity="final">
          <Attribute
name="HROBJECT_OBJEKTID"
type="string"
displayName="HROBJECT_OBJEKTID"/>
        </CustomAttributeSource>
      </CustomAttributes>
      <Actions>
        <Action
name="launchWebDynPro"
groupAction=""
handler="SAPWebDynproABAPLauncher"
returnToDetailViewAllowed="yes"
launchInNewWindow="yes"
launchNewWindowFeatures="resizable=yes,scrollbars=yes,
status=yes,toolbar=no,menubar=no,
location=no,directories=no">
          <Properties>
            <Property
name="WebDynproApplication" value="hr01_app"/>
            <Property
name="newWindowFeatures"
value="resizable=yes,scrollbars=yes,status=yes,
toolbar=no,menubar=no,location=no,directories=no"/>
            <Property
name="DynamicParameter"
value="candidacy_id=${item.HROBJECT_OBJEKTID}
&from_workflow=X"/>
            <Property
name="openInNewWindow" value="yes"/>
            <Property
name="System" value="SYSTEM_ALIAS_ERP"/>
            <Property
name="WebDynproNamespace" value="hr01"/>
          </Properties>
          <Descriptions default="Show"/>
        </Action>
      </Actions>
    </ItemType>
</ItemTypes>
Thank you very much, best regards, Martin
Edited by: Martin Sommer on Dec 1, 2008 5:51 PM

found a solution with transaction launcher and custom transaction

How to raise a Terminating Event for a Standard Task?

Hi Experts,
I have a standard task where I have defined the Terminating event to stop the workflow.
This Task/Workflow will be triggered by a batch program.
Also in a class method I am using function module SWE_EVENT_CREATE to raise a event which should complete the workflow. But somehow the work items are still in In Process status.
May be I am passing wrong parameters OR using wrong FM to raise a terminating event.
Request you to help me on this. Thanks in Advance.
Regards,
Sudhakar.

Hi Sudhakar,
Since there are entries in SWE3 which show link each time event is triggered. So I would suggest you will have to check the standard task you are using is working. So create a parallel branch with activity on one end and wait for event step on other. See if the the wait for event step works, when you create the event using create event. If it works then most likely your task binding has a problem. If not then event that is triggered does not getting picked by workflow. So based on the finding we can find a solution.
I notice that you are calling the event from an ABAP class, so in that case the code for calling event seems to be different. Check out the below SAP help documentation.
http://help.sap.com/saphelp_nw2004s/helpdata/en/a1/172437130e0d09e10000009b38f839/frameset.htm
Regards,
Kartik N.
Edited by: KARTIK Nayak on Dec 12, 2008 8:25 PM

TS - Standard Task object type

Hi Gurus,
I am trying to assign the object type TS - Standard task for the tcode - PO13 (position), but i am getting the error as Standard task does not exist (ID of related object field). I have searched in R/3 to create TS - Standard task, but not available. Please suggest me where to be done.
Vijay.

Standard Task mainly used by Tech consultants in Workflows.
Inputs from SAP doc......
The standard tasks provided by SAP are generally used as steps in a workflow template. They are available as "modules" which you can use for your own developments.
If a workflow scenario only involves one standard task, it can usually be regarded as a minimal solution for showing the connection between application functionality and SAP Business Workflow. For differentiated workflow management, this standard task should be replaced by a customer-specific workflow task
Mohan

Populate information to standard task

I am using standard task TS20000139 for a reason for rejection in my custom workflow.
In the Workflow container, I have the receiver name and receiver type in variable and I want to have the receiver name and receiver type to be automatically populated in the task.
I want to know whether it is possible to populate the above to data to standard task. If so, how can I populate these in the standard task.
Regards

Hi,
Are you new to workflow?
I think you can search sdn for more on binding.
And at present, solution to your problem would be,
copy that std task.
Call this task in your workflow instead of std task.
Then open that task and go to containers tab.
Create a container similar to your workflow container for Receiver name & receiver type with import/export parameters set.
Once this is done, save it, come back and click on the binding icon.
Try with auto binding there. If that doesn't work, try manual binding. (just drag and drop your workflow & task containers).
Hope it helps.
Regards,
Raj

Notification to the standard task.

Similar Messages

Maybe you are looking for