Notification to Windows 2000 machine

Does anyone know of a way to post a windows popup notification from a Solaris box to a windows 2000 machine?

franksalot wrote:
I have an ancient window 2000 PC that is used as a cash register for my business. I know it is a dinosaur but it is stable and works well for us.
I hope you have a backup plan not only for your data but for that hardware when it decides to fail!
Any suggestions as to how we can assign a static IP to the old machine?
Use AirPort Utility to put the Express into "manual setup" mode. Select the Internet panel, then the DHCP tab. Add the Windows box to the "DHCP Reservations" at near the bottom. I'd use the MAC address feature. If you have trouble identifying that piece of information, you might find it in the "DHCP Clients" table under the menu item Base Station -> Logs and Statistics.

Similar Messages

Unable to install Net8 on Dell P4 Windows 2000 machines

We are unable to install Oracle 8i on our new Dell P4 Windows 2000 machines. The error comes from jrew.exe.
The following is the error messages that appears when trying to configure Net8 on these machines:
java.lang.ExceptionInInitializerError
     at oracle.ewt.UIManager._loadUserProperties(Unknown Source)
     at oracle.ewt.UIManager._initialize(Compiled Code)
     at oracle.ewt.UIManager._maybeInitialize(Unknown Source)
     at oracle.ewt.UIManager.getLookAndFeel(Unknown Source)
     at oracle.ewt.lwAWT.BufferedApplet.<init>(Unknown Source)
     at oracle.net.ca.NetCA.<init>(NetCA.java)
     at oracle.net.ca.NetCA.main(NetCA.java)
Exception in thread "main"
This is the detail for Net8 Configuration Assistant message.
Any help is appreciated.
Thanks
Mike

There is a KB on the web that explains how to get over this problem and the reference number for this is 2U6ETM44
I have also attached a copy of MSIBlast to make your life doing this a little easier.
Good luck, and hope this helps
Attachments:
msiBlast.exe ‏232 KB

.mac email troubles on windows 2000 machine

I posted this on another mac discussion board but didn't get any answers, so i thought i'd try here.
During the time that I am unable to access the internet with my iMac, I'm using my Windows machine, WIndows 200 and Outlook Express to get my .mac email. I can't seem to get it to set up properly to send mail, though. I'm mirroring the Outlook Express configuration on the iMac but it won't send using my mac address. I am able to send using my hotmail address. ANy thoughts?
thanks in advance.

i my view of thing the only thing that has to do with swing is your title. this is not the right form for this type of thing......
Try
one of these
http://forum.java.sun.com/forum.jspa?forumID=37
http://forum.java.sun.com/forum.jspa?forumID=32
David

My Windows 2000 machine has trouble booting up after instaling PCI-6503 card

After I installed the card in my Dell Desktop has trouble booting up. I have to pull the power cable out and then reconnect for it to come up.

Hello;
The best way to go about that is to completely uninstall the NI-DAQ driver you have installed on that machine, turn the computer of and remove the board from it.
You then reintall NI-DAQ, and put the board back. If the same behavior shows, the best bet is to search for some other peace of Software/Hardware currently installed on the machine that might be conflictant with NI-DAQ.
Regards
Filipe A.
Applications Engineer
National Instruments

Why the jsp tag jsp:forward page="page.jsp" / works when i work with web server iPlanet in a Solaris machine and doesn't work with the same web server, in a Windows 2000 machine ?

The request parameters don't go to the "page.jsp"...

If someone else runs into this, here is how I solved the problem -
          If you create a PrintWriter object with the autoflush option, it
          doesn't flush the underlying buffer till you call println on it. I
          looked through the generated code for the servlet, and it was doing a
          JSPWriter.print() to output information.
          So, I changed the ResponseWrapper to keep a handle to the PrintWriter
          object, and then flush it in the filter, and that works.
          Why the same code behaves differently in JRun & Weblogic, I'm not sure
          --Sridhar

Installation problem on windows 2000

Hi,
Please help!
I've been tring to install oracle on windows 2000 machine unsuccessfully. the setup program aborted without error message. I've tried many versions of oracle database, 8.1.7 all editions, 8.1.6ee, 9iAS. the only message error I got when 9iAS failed to install (iSetup.exe). the problem seems to be with the java runtime environment. the jre 1.1.7 came with 9iAS would not run properly. I've tried to install java2 and jdk1.1.8 from javasoft, still no luck.
Any idea?
Thanks,
Jay Lee
[email protected]
null

Hi,
The problem of installing Oracle Product on P4 computers comes from the symcjit.dll (Java Jusit in time compiler) which doesn't recognize the P4.
I installed Oracle products on my P4 just by copying the CD's on a harddisk and manually replacing the dll (which is Version 3...) by a one I found to be Version 4.0.0.7.
It is maybe not the best solution as it can result some instability (I don't know yet) but at least I didn't bought a brand new computer for nothing.
The question is to know when Oracle will deliver some patches to allow a normal installation on P4s.
Let me know if you want me to send you the dll.
Regards,
Jacques.

Installation Problem Personal Oracle 8.0.4 on Windows 2000

When trying to install Personal Oracle 8.0.4 on a Windows 2000 machine, i get an Error:
"Unable to delete the NT Service for the SQL *Net V2 Listener".
No previous installation of Personal Oracle is present on this machine as it's a newly installed OS.
Any Help would be appreciated

I tried installing Oracle 8i Personal Edition in Windows 2000. The installer loads and it start installing the files, except when it goes half way through the installation, it quits. I don't know if this is a bug in 8i Personal Edition or not. Because I am unable to install the software on my machine.

Error in webstart install in windows 2000

When I try to install webstart on my windows 2000 machine I get this error: "Error opening file for writing: C:\Program Files\Java Web Start\javawebstart.dll"
I am installing as administrator also so I don't have a clue why this is happening. Any help would be greatly appreciated. Thanks.

Use the task manager to see if another copy of Java Web Start is running.
Windows will not let you overwrite an open file.
If that dosn't help, try uninstalling the old version of Java Web Start first.

Error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000

Hi folks,
I am getting the following error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000 machine:
Error 1327. Invalid Drive: H:/.
I have downloaded the exe and kept in C drive. Just clicked that exe to install. I haven't set any info. like drive settings. Why I am getting "Invalide Drive" Error?
Please help me.
Thanks in advance.
Pavan

if my above link doesn't satisfy you, try this one : http://support.installshield.com/kb/view.asp?articleid=q107033

Installing SQL Server 2008 Express on windows 2000 server ?

Is is possible to install SQL Express 2008 on a Windows 2000 machine. Has anybody come across any issues doing this. any advice would appreciated.
Thanks in advance
Jayce.

Hi Jayce,
The web page "Hardware and Software Requirements for Installing SQL Server 2008 R2" does not list Windows 2000 as a compatability option as follows; -
http://msdn.microsoft.com/en-us/library/ms143506.aspx#Express32
The earliest desktop operating system listed is Windows XP.
So I understand you can't successfully install SQL Express 2008 on a Windows 2000 machine.
Kind Regards,
Kieran.
If you have found any of my posts helpful then please vote them as helpful. Kieran Wood PGD SoftDev (Open), MBCS http://uk.linkedin.com/in/bileeds

PDF conversion with windows 2000 not working

Hello all, I have a BSP application that is up and running. When I print with an XP machine, I have no problems. When I print with a windows 2000 machine, I am looping and never getting to the PDF open screen. It just keeps looping but if I try from a XP machine, everything works.
Any help would be appreciated. i have included some of the code.
* Conversion of output format OTF into PDF format
* now convert the final document (OTF format) into PDF format
call function 'CONVERT_OTF'
       exporting
         format                      = 'PDF'
*         MAX_LINEWIDTH               = 132
*        ARCHIVE_INDEX               = ' '
*        COPYNUMBER                  = 0
       importing
         bin_filesize                = l_pdf_len
         bin_file                    = l_pdf_xstring       " binary file
       tables
         otf                         = ls_output_data-otfdata
         lines                       = lt_lines
       exceptions
         err_max_linewidth           = 1
         err_format                  = 2
         err_conv_not_possible       = 3
         err_bad_otf                 = 4
         others                      = 5
if sy-subrc <> 0.
*   error handling
*    message id sy-msgid type sy-msgty number sy-msgno
*            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
* Fill HTTP request
response->set_header_field( name = 'content-type'
                              value = 'application/pdf' ).
* response->delete_header_field( name = 'pragma' ).
* response->delete_header_field( name = 'expires' ).
* response->delete_header_field( name = 'cache-control' ).
* some Browsers have caching problems when loading PDF format
response->set_header_field(
                    name = 'cache-control'
                    value = 'max-age=0' ).
* start PDF viewer either in the Browser or as a separate window
if pdf_in_browser is initial.
     response->set_header_field(
                        name = 'content-disposition'
                        value = 'attachment; filename=BenConf.pdf' ).
endif.
* finally display PDF format in Browser
l_pdf_len = xstrlen( l_pdf_xstring ).
response->set_data( data   = l_pdf_xstring
                      length = l_pdf_len ).
navigation->response_complete( ).

You must remove all the no-cache headers and definitely disable GZIP compression for PDF files.
Look at <a href="https://wiki.sdn.sap.com/wiki/display/BSP">BSP Wiki</a>:
Handling Binary Data
PDF

Trouble connecting Windows 2000 PC to Airport Extreme

I'm having trouble connecting a PC running Windows 2000 to my Airport Extreme Base Station. The PC is using a D-Link wireless USB 2.0 adapter (802.11g) to connect to the internet. The PC would connect without problem when I was using a D-Link wireless router but will not connect with the new Apple base station.
In addition to the Windows 2000 PC I have a Windows XP PC (connected via ethernet), an iBook G4 and an Epson printer connected to the Airport Extreme and they all work without a problem.
Can anyone tell me how to solve my problem with the Windows 2000 machine?
Thanks.

I am having the same issue; since you did not seem to receive any replies on this forum, am wondering if you resolved the problem; am also wondering if my issue is the distance from my Airport Extreme base to the Windows PC. My next step is going to be to try moving the Apple router closer to the Windows PC and see if that Linksys wireless picks up the signal.

Problem Starting WLS 5.1 from windows 2000 program group

Hi
I couldn't able to start Weblogic server 5.1 from windows 2000 program
group(start > Programs > Weblogic 5.10 > Weblogic Server). I can start WLS
without any problem from the console . I've check every configuration and
environment setting, the problem still come out. Whenever I start WLS from
program group , a window dialog with error messages will come out , here's
the error messages :
wlserver.exe - Application Error
The instruction at "0x04d5d0d6" referenced memory at
"0x00000000". The memory could not be "written".
Click on OK to terminate the program
Click on CANCEL to debug the program
Any suggestions/solution will be appreciated .
Thanks
Chew Leong
[email protected]

look for weblogic.system.password property in your weblogic.properties
file and see what's in there.
Shailesh Mungikar wrote:
I am trying to install WLS 5.1 SP12 on my Windows 2000 machine.
I have WLS 6.1 already installed my PC.
When I try to install, at the very end when
"System" password required
dialog pops up, I get another dialog box saying
WLPASS~1.exe Application Error
The exception Floating point division by zero (0xc000008e) occured in
the application at location 0x50147c14
When I press OK, it kill the "System password" dialog.
The installation seems to be complete.
If I go ahead and try to start weblogic, I get Exceptio
java.security.AccessControlException: access denied
(java.lang.RuntimePermission createSecurityManager)
Any solution/workaround?
thanks,
_shailesh

Installing j2sdk1.4.1_02 on Windows 2000

I just downloaded and installed the sdk on a new Windows 2000 machine.
I can execute a program from the command line (java MyProgram) ok. However I can not compile one (javac MyProgram).
When I attempt to compile I get a pop up with the following three line message:
javac.exe has generated errors and will be closed by Windows.
You will need to restart the program.
An error log is being created.
In looking at the windows event logs I can find no reference to this problem. Does anybody know what other logs this problemn might have been written to?
restarting just ends up giving me the same pop up.
reinstalling didn't help either.
I then installed Visual Cafe Version 3c and attemprted to run it. On launch of Visual Cafe the same pop up occurs.
Anybody have any ideas? Both ClassPath and Path look good.
I did download Netscape7 earlier. Is there a possible conflict here with its Java plug-in?

got javac to work redownloaded the SDK and then reinstalled it. There was a 2k difference in the javac.exe files between the two downloads so some how I corrupted the first one.

Has anyone had success with Messaging Server 5.2 under Windows 2000 Server?

Just to be up front - we MUST use Windows 2000 - they're not giving me a choice to move to Solaris or Sun Hardware. Linux isn't even a choice, nor is WinNT. (I know, it's annoying).
I've managed to get Directory Server 5.1 to run under windows 2000 without active directory installed. I found that I needed to modify the ims_dssetup.pl script that comes with the Messaging Server 5.2 to reference the full path to my ldapsearch and ldapmodify executables. Apparently, this is a win2k specific problem, and is not necessary on WinNT. This made ims_dssetup.pl work and the install of Messaging Server 5.2 work on a windows 2000 machine.
However, at reboot, the job controller and dispatcher do not automatically start. When I try to start the services manually, I get "Error 1067: The Service terminiated unexpectedly".
Any ideas? I'm desperate here - they're gonna make us use exchange if I can't get >>something<< working. Even a 4.x version of messaging server will do.
Thanks

Well, I do understand that.
However, I've installed iMS 5.2 on win2k several times (I admit, w2k pro, not server), and i've never installed AD.
If you can get it installed and working for your default domain, but not for other domains, then most likely it has nothign to do with AD or AD domains. iMS idea of domains is very different from AD's idea of domains. We need to be very clear about such.
for iMS, you have to create additional domains through Delegated Admin, as either "Hosted Domains" or as "Vanity Domains". We do not suggest using "Vanity Domains", and support for such is deprecated.
Once you have created "Hosted Domains" through Delegated Admin, you can add users to those domains, and they should work, just fine.

Notification to Windows 2000 machine

Similar Messages

Maybe you are looking for