Notification type  -change -reg

Hi,
Can the notification types in the already created notifications changed ?
example : one notification is created with notification type M1 instead of M2
Can it be changed
Normally it will not be i think , in  ECC6.0   any of thsi functionality available ?
regards
madhu kiran

Hi,
You can only change notification type of a general notification, that is a notification of category 05 (this rules out changing M1 to M2). The customizing must allow notification change - see customizing under 'Overview of Notification Type'. The notification must still have status outstanding for the change to be allowed.
The exit QQMA0029 is provided to allow some further control during the notification change procedure, it does not assist in making the feature available.
-Paul

Similar Messages

  • Regarding - Notification Type Change

    Hi,
    I want to change my notification type G0 to M1, M1 to G0, M2 to G0  etc.....In SPRO Setting i had made the changes Allowed changes to notification type,
    When i created & saved the Notification, in change mode how to change the notification type, if i want to change it, its their any other settings in spro i hav to do ?
    Regards
    Prakash.B

    Hi
    As far as my experience in this respect is concerned, while remaining with the standard functionality, configure the Notification Types (In Category 05 General Notification) for all the Notification Types you want to change to some other Notification Type. Then configure the Allowed Change of Notification Type. Create Notifications via IQS1 and thereby change the Notification Type via IQS22.
    Hope this would help you out.
    Regards
    Hunain

  • Notification Type change

    Dear Experts,
    Can we change the Notification Type after the Notification has been created. Any method ??
    Regards
    DM

    hi
    it is basically used in simplified notification processing which is used very occassionly with minium  inputs
    for details please refer the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/32/293d381f138268e10000009b38f8cf/frameset.htm
    regards
    thyagarajan

  • Deliquency Notification type  Change

    Hi Experts,
    Is there any possibility to change the notification type (NOT) DL to some other characters say DD ? if so can you please explain where to change.
    Thank you..

    hi
    it is basically used in simplified notification processing which is used very occassionly with minium  inputs
    for details please refer the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/32/293d381f138268e10000009b38f8cf/frameset.htm
    regards
    thyagarajan

  • EAM Portal, Change Notification type in the "Create Notification Request "

    Hi all,
    I can't change the "Notification Type" in the "Create Notification Request" screen, in EAM Porta. We are going to implement "Maintenance technician Role" in the EAM Portal.
    Any information would be appreciated.
    Thanks,
    Alex

    hi young
    kindly check in customizing funtions whether the field selections for notification it has been marked as display,
    also kindly inform about the detailed process you are doing(T code) while facing the said problem
    regards
    thyagarajan

  • ATTACHING WEB URL'S AS NOTIFICATIONS IN CHANGE SPECIAL INFORMATION TYPES.

    Hi,
    I want to add URLas notification in Change Special Information Types process in HRSSA workflow.How to proceed?

    The URL should appear in employee review page V4.0

  • Changes in Notification type

    Hi All,
    We want to change the Notification type - YWQN type to YCQN type in Quality Notification- 1111111. Is it possible or do we need to reject this QN and create another new qn of YCQN type. Can u please advise?
    Thanks

    I am not very sure but In the customization of notification if you have maintained setting to change YWQN type to YCQN then you can change.

  • Reg: how to get notification type QMART

    Hi experts,
    how to get notification type QMART
    BAPI_DOCUMENT_GETLIST2..
    regards,
    ramesh..

    Hi
    Get the same from <b>QMEL table
    Master table is TQ80
    and texts are TQ80_T</b>
    Reward points if useful
    Regards
    Anji

  • Quality notification type

    Dear Experts,
    I am a QM Consultant.
    How to create or include a new notification type? Can anybody brief it?
    Regs,
    RPV

    hi
    goto
    SPRO>Quality Management>Quality Notifications->Notification Creation-->Define Notification Types
    here select any existing QM notification tyrp and click on copy as button (F6)
    now change the name and descrioption and save
    ashok

  • QM_move stock to block stock through Q2 notification type

    Dear QM Experts,
    u2022 I am creating quality notification type Q2 through QM01
    u2022 After doing necessary defect entry I want to post the defective material to block stock.
    u2022 For this I am using action box transfer posting unrestricted to block.
    u2022 By doing this material can be transferred to block stock of the same storage location
    Requirements,
    u2022 Is it possible to move the material to block stock of another storage location?
    u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
    u2022 What type of setting needs to be done to achieve this effect?
    Thanks
    Anand Rao

    Hello
    u2022 Is it possible to move the material to block stock of another storage location?
       In notification action box you have the option of transferring the material from unrestricted to  block. In that you have the option inputting the storage location to which you want to transfer
    u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
    - As said this can be done through a development or other option is that you can choose the same action box( Transfer  unrestricted to block ) and change the movement type to 311. It will allow to move material from  one storage location to another
    another solution is that you can use tak with followupaction as Goods movements. its available in the standard. when u save the notification it will take you to transfer posting but wherein you will have to key in all the details
    u2022 What type of setting needs to be done to achieve this effect?
    Its available in the action setting in the configuration of notification. you will surely require ABAP help

  • Digital Signature for QM notification status change

    Hello experts,
    I need your guidance regarding implementation of user digital signature for QM notification status change. Our customer has ECC 6.0 but they are not inclined to introduce enhancement package 3 soon. Now their requirement is that while QM notification status change they want to have a user signature pop-up to verify the user authorization to do so. But they don't want to do so by using digital signature via DMS status change.
    I am really not sure if I have explained the situaion correctly or not as i am quite new to QM. But I am desparately looking forward to get your valued replies in this regard.
    Best regards,
    Anirban

    To fulfill the FDA requirement we have apply the logic to make sure that a digital signature is captured for status changes during task processing.
    To map this requirement we have developed one custom table to store remark that will be displayed on digital signature remarks textbox. This table will have following feild:
    STAT - System/ user status
    QMART - QN type
    SPARS - language
    TEXT - character text.
    Work with ABAPer to implement this, and after implementing validate following key point:
    u2022     Validate that after successful digital signature that the signature cannot be overwritten.
    u2022     Validate the locking of the User ID after customer specific number of unsuccessful signature attempts.
    u2022     Verify that the digital signature works for each status.
    u2022     Validate that if the digital signature is cancelled prior to successful entry that the system status reverts back to previous status and all processing authorizations allowed for that status still function properly.
    Hope my reply will help you.
    Thanks!!!

  • PM Notification archiving -clarification -reg

    HI,
    While planning for PM notifications archiving , io the preprocessing step  of the tcode SARA , we dont find any reference date .
    We need to archive notification which are changed before two years
    we can take the details from QMEL like table  and input in SARA , but going forward we need to schedule back ground jobs for the notifications archiving
    do we need to do customization soem where to get the option of date here in the preprocessing stpe ?
    now we have only
    notification type
    notification number
    equipment
    functional location
    where as in the case of PM orders (object :PM_ORDER) we have the DLFl date or change date as reference
    pl suggest
    regards,
    Madhu Kiran

    Hi,
    For PM Orders and Notifications two flags need to be set: deletion flag and deletion indicator.
    For PM Order, the pre-processing variant can set both: deletion flag and deletion indicator.
    For PM Notification, the pre-processing variant can only set the second one: deletion indicator. Hence, you can either manually set the deletion flag or create a custom program to set this deletion flag for you. Then SAP will analyse (in the pre-processing program), those notifications flagged for deletion and set the deletion indicator if possible.
    After this, the write archiving program will pick up those notifications with deletion indicator set and archive them.
    Hope this makes sense now.

  • Controlling same Notification Types against few Planner groups

    Dear Experts,
    We have four groups of Maintenance Team (Mec, Ele, Inst & Civ)  which are controlled against four roles to create same Notification types. The control factor is planner group which are linked against their required role and it is working fine to create notification (IW21) for their specific group.
    The problem which we are facing is, change mode of Notification,  Mech planner group team can change the details of Notification in Elec group as
    same Notification types are used by 4 groups. Is there any way to restrict for the change authorization (IW22) in Notification as four teams are following four differernt roles.
    Regards,
    Sahu

    Ajaya,
    Check the values in Authorization Object I_QMEL. (PFCG tcode of the respective Role) See the picture below. Assume this is your role for Civil Notification type (CE). It should look like this.
    Also, try by removing the values in TCD field in other authObjects of this Role.
    One more possibility is
    Some Role other than this specific Role is enabling the user for IW22. This role might have been assigned to all these 3 users. You need to trace this and remove or modify the role.
    This problem is a typical one often seen to be associated with AuthObjects, This can be managed by investigation.
    A last resort method can be to manage this through user-exit QQMA0014. This is possible.
    KJogeswaraRao

  • User Exits for IW21 - Notification Type

    Hi ,
    I need to access User Exit related to IW21 , IW22 Transactions.
    I require the user exit to customize process for a specific Notification type 'KS'.
    User exit when a notificatrion Type is created & when it is modified.

    User Exits and Badi's For IW21 & IW22
    BADI's
    IQS0_STATUS_MAINTAIN Control of Changeability of User Status
    IWO1_SUBSCREEN_0170  Display Additional Data on Object Screen 0170 PhysicalSample
    IWOC_LIST_TUNING     Performance Tuning for Lists in PM/CS
    IWOC_OBJECTINFO_CHNG Changes to Data of Object Info Screen
    NOTIF_AUTHORITY_01   Additional Authorization Checks for the Notification
    WOC_FL_DETERMINE     Determine Date for Determining Installation Loc. Equi.
    USER EXITS
    IWO10026  User check on setting status 'Do not perform'
    IWO10027  User exit: Generate user-defined settlement rule
    IWOC0001  Create PM/SM notification: Determine reference object
    IWOC0002  PM/SM notification: Check whether status change is allowed
    IWOC0003  PM/SM authorization check of ref. object and planner group
    IWOC0004  Change single-level list editing PM/QM/SM ALV settings

  • Screen Structure for Extended View" in "Overview of Notification Type"

    Dear Members,
    When I am using the function "Screen Structure for Extended View" in "Overview of Notification Type" in SPRO, I am not able to make any changes to "Tab Page Allocation" and areas under "Screen Area"  What should i do to overcome this.
    Thanks & Regards

    Hi,
    The  "Tab Page Allocation" setting determines how many sub-screens can be added to the tab. It is therefore not possible to change this field for some tabs which are designed to be single screen only. Example - 10\TAB10 (items), 10\TAB11 (tasks).
    Should be changeable on tabs that allow multiple subscreens. Exampel - 10\TAB02 (Additional data).
    -Paul

Maybe you are looking for

  • Apple mobile device support cannot install. rolling back action.

    I cannot uninstall amds. also cannot repair. I am using windows vista home premium x32. After uninstall itunes and its components, still the same instruction by apple. itunes 10.4.

  • TS3297 when accessing, iTunes store, iTunes stops working?

    When accessing iTunes store, Itunes stops working. Problem  event name : APPCRASH Application name ; iTunes.exe Application version : 10.6.3.25 Failed Module : atiumdag.dll

  • WIP report and WIP gl value differ

    Dear all, When I execute KKAO report for a particular month, the WIP values for some orders differ from the WIP Gl Balance for the particular period. Please suggest me why this difference occurs? Thanks & Regards, A.Anandarajan.

  • Modification of program LRRSVF20

    Hi Experts, I am applying doc "How to....Report Data in Alternate Units of Measure" in BW3.5 Can you mention OSS Note to modify program LRRSVF20 for unit conversion? Useful answer will be rewarded with suitable points. Thanks in advance! Sapna

  • Implementing a MousePressListener as a separate class

    I've got a MousePressListener inner class (i.e. MouseListener that listens for MousePressed event) within a MouseApplet class. I want to implement this inner class as a class of its own. I suspect that I'm going to need to store a reference to the Mo