Notification widgets are not displayed - iOS 8
Hi community,
i have a problem regarding the new widget feature in notification center.
Although activated, Wunderlist and Apple's own reminders app (I hope it's called like that, as it has a different name in Germany) are not displayed. It is not like this happened right from the start but since I deleted one of my list in reminders, I'm not able to display a new one in notification center.
With Wunderlist it's a similar behavior. When I first activated it, it has been displayed. The problem was that I had just installed the app and didn't even log in. Therefore I opened Wunderlist via notification center, but wasn't able to log in. Subsequently I shut it down, no change. So I deleted the app, downloaded it again and logged in. Since then, Wunderlist is gone from notification center (although activating again).
Any suggestions?
Thank you in advance!
Tim from Germany
hello
I am using iphone 5 having ios 8 .. my notification center widgets are appearing but are not updated automatically ..
If you have any solution then please share ,,, I did restoring my device and installed fresh ios
so is it a network issue, ios issue or application issue?
Similar Messages
-
Weather and Stocks widgets are not appearing in my notification center
I just updated my iPad 2 to iOS 5 and the weather and stock widgets are not appearing in my notification center. I tried to look for them under the notificatns tab in the settings app to activate them (which I read in an unofficial article) but they're not there. Can anyone please help?
Tgara wrote:
There are plenty of apps in the App Store that can do what you want, and many are free.
There are not currently (or at least I haven't found any) any weather apps that will appear in the Notifications Center the way the included app does on the iPhone. It's not a big deal for me but I can understand the people who want it. -
On our ipad 2, after upgrading to iOS 7, the photo album is completely screwed, and the saved photos are not displaying correctly. How do we get our photos Back?
OK, tried the reset and it seems to have cleared up some problems; however, the picture problem remains.
Maybe there is something further we could do in settings? My wife uses the iPad as her constant companion and likes to take screen shots (pictures) of recipes and such. She keeps them in albums. Before the update to iOS 7 they all displayed correctly regardless of physical machine orientation. Now, post update, when in landscape mode, which she uses 99.9% of the time, her pics do do fully display. By physically rotating the machine, they will appear correctly. We have noticed that there is a new "function" in edit pics for "aspect ratio."
Should we be using this? If so, she'll have to edit a very large number of pics. So I'm wondering if we're missing some new setting. BTW- this display problem also occurs with pics taken with the camera as well. -
Scientific fluorescence figures are not displayed correctly on iPad
I use the iPad 1 for reading scientific papers, and I figured out that some fluorescence figures are not displayed correctly. The colours are not correctly distinguished, even some colours are completely missing. Is this a limitation of the iPad display or the current version of iOS.
I am really disappointed. So, is there any solution?
Many thanks.
On MacBook Pro
On iPad 1I am woundering if anyone can suggest any solution? Thank you.
-
ICamera photos are not displayed in iPhoto
HI!
I have a big problem: Whan I make photos with the included camera in my iPad,
these photos are not displayed in the iPhoto app supplied with my iPad. I can't find
them.
I'm using IOS 5.0.1.
Any help? PLEASE!!!After you snap the photo with the iPad, and that picture shrinks down to the corner, you should ba able to tap that little picture - and it should open in the Camera Roll in the Photos app.
I'm not sure what to suggest other than the basic, first try, troubleshooting steps.
Quit the camera app and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?
That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first. -
Video chapters are not displayed anymore
Since a lot of weeks and many ios updates the video chapters are not displayed anymore. The thumbnails disappered and the chapetr names are gone.
Before ios 5 both did work.
Is there a solution?
Thanks HansDisclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
It remains the same with the video app in iOS 5.1.1, no chapter names.
Give Apple feedback and request chapter titles;
http://www.apple.com/feedback/ipad.html
Search for a 3rd party iOS video app that perhaps provides this functionality. -
Umlauts are not displayed correctly in different programs
Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)Did you check the locale settings on your Windows machine?
-
Chinese characters are not displayed in the Firefox bookmarks
Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
I googled and got some tips:
1) Set your browser to recognise Chinese language internet sites.
Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
- I did this.
2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
Encoding settings can be changed under the "View" option in your browser's menu-bar.
- It was already set to UTF-8.
3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
- This has been done when I installed Windows.
I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla. -
Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?
Hi,
I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
METHODS:
display IMPORTING l_table TYPE string
l_fcat TYPE string.
ENDCLASS. "lcl_report DEFINITION
CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
DATA: gr_table TYPE REF TO cl_salv_table.
DATA: gr_columns TYPE REF TO cl_salv_columns_table,
gr_column TYPE REF TO cl_salv_column_table,
ls_fcat TYPE slis_fieldcat_alv.
DATA: gr_display TYPE REF TO cl_salv_display_settings.
DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
l_field TYPE string.
FIELD-SYMBOLS : <fs_table> TYPE STANDARD TABLE,
<ft_fcat> TYPE STANDARD TABLE.
Get the ALV object refering to the output table
ASSIGN (l_table) TO <fs_table>.
ASSIGN (l_fcat) TO <ft_fcat>.
TRY.
cl_salv_table=>factory(
IMPORTING
r_salv_table = gr_table
CHANGING
t_table = <fs_table> ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
Add basic default functionality in the ALV report
Functions
l_o_functions = gr_table->get_functions( ).
l_o_functions->set_all( abap_true ).
gr_columns = gr_table->get_columns( ).
gr_columns->set_headers_visible( abap_true ).
Display the list
gr_table->display( ).
ENDMETHOD. "extract
ENDCLASS. "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
get_storecodes USING p_stfile
CHANGING it_t001w,
fetching mard data
read_mard_data,
preparing fieldcatalog for Final Data
create_filedcat USING it_t001w
it_site
CHANGING it_fieldcat,
preparing structure & internal table for Final Data
create_final_table_structure USING it_fieldcat,
prepare output data
prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
display_data USING l_table
l_fcat.
*& Form get_storecodes
FORM get_storecodes USING p_p_stfile
CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw TYPE truxs_t_text_data,
rs_site LIKE LINE OF rt_site,
l_index LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_line_header = 'X'
i_tab_raw_data = lt_raw
i_filename = p_p_stfile
TABLES
i_tab_converted_data = p_it_t001w[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
l_index = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = <fs_t001w>-werks
IMPORTING
output = <fs_t001w>-werks.
MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
append site to ranges
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = <fs_t001w>-werks.
APPEND rs_site TO rt_site.
CONTINUE.
ENDIF.
ENDLOOP.
SORT p_it_t001w BY werks.
SORT rt_site.
ENDIF.
ENDFORM. " get_storecodes
*& Form create_final_table_structure
FORM create_filedcat USING p_it_t001w LIKE it_t001w[]
p_it_site LIKE it_site[]
CHANGING p_it_fieldcat LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site> LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname TYPE slis_fieldname,
workarea for site ranges
rs_site LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING : 'MTART' 'CHAR' '5' ,
'MTBEZ' 'CHAR' '25' ,
'MATKL' 'CHAR' '6' ,
'WGBEZ' 'CHAR' '20' ,
'MATNR' 'CHAR' '18' ,
'MAKTX' 'CHAR' '30' ,
l_fieldname 'CHAR' '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
'Divsion Description',
'MC Code',
'MC Description',
'Article',
'Article Description',
l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t001w> IS ASSIGNED AND
<fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
CLEAR : l_fieldname, rs_site.
l_fieldname = <fs_site>-werks.
prepare fieldcatalog
PERFORM build_fieldcatalog USING : l_fieldname 'CHAR' '17'.
create header for excel
PERFORM create_excel_header USING l_fieldname .
CONTINUE.
ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM. " create_final_table_structure
*& Form build_fieldcatalog
FORM build_fieldcatalog USING p_fieldname TYPE slis_fieldname
p_datatype TYPE datatype_d
p_length TYPE intlen.
DATA : ls_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname = p_fieldname.
ls_fieldcat-datatype = p_datatype.
ls_fieldcat-intlen = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM. " build_fieldcatalog
*& Form create_final_table_structure
FORM create_final_table_structure USING p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM. " create_final_table_structure
*& Form create_excel_header
FORM create_excel_header USING p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM. " create_excel_header
*& Form prepare_final_data
FORM prepare_final_data .
DATA : l_matnr LIKE g_matnr,
l_werks LIKE g_werks,
l_index LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard> LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
l_index = sy-tabix.
IF l_matnr IS INITIAL.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSEIF l_matnr <> <fs_mard>-matnr.
APPEND <fs_final> TO <ft_final>.
CLEAR l_matnr.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSE.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
ENDIF.
IF l_index = g_lines.
APPEND <fs_final> TO <ft_final>.
ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM. " prepare_final_data
*& Form get_other_data
FORM get_other_data USING p_l_matnr
p_l_werks.
FIELD-SYMBOLS : <fs_mara> LIKE LINE OF it_mara,
<fs_t023t> LIKE LINE OF it_t023t,
<fs_t134t> LIKE LINE OF it_t134t,
<fs_makt> LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr. " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-mtart.
ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-matkl.
READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr BINARY SEARCH.
IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_makt>-maktx.
ENDIF.
READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t023t>-wgbez.
ENDIF.
READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t134t>-mtbez.
ENDIF.
ENDIF.
ENDFORM. " get_other_data
*& Form display_data
text
FORM display_data USING p_l_table
p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
l_fcat = p_l_fcat ).
ENDFORM. " display_dataI don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
call method set_colname
EXPORTING iv_tab = alv_tab
iv_colid = 'xxxx' "fieldname from the table
iv_stxt = text-t54
iv_mtxt = text-t55
iv_ltxt = text-t55.
METHOD set_colname .
data:
alv_cols type REF TO cl_salv_columns_table,
alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
IF iv_stxt <> ''.
CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
ENDIF.
IF iv_mtxt <> ''.
CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
ENDIF.
IF iv_ltxt <> ''.
CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
ENDIF.
CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname -
Items are not displayed --- REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi experts,
i'm stuck in this weird problem.
Items (it_items) are not displayed in table. I've cheked with debugger and it_items contains lines.
Thanks in advance.
REPORT z_hier.
TYPE-POOLS: slis.
DATA: fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: it_header LIKE STANDARD TABLE OF zvend_header WITH HEADER LINE,
it_items LIKE STANDARD TABLE OF zvend_items WITH HEADER LINE,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
gs_keyinfo TYPE slis_keyinfo_alv.
PARAMETERS: lifnr LIKE lfa1-lifnr.
INITIALIZATION.
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'LIFNR'.
gs_keyinfo-item01 = 'IDNLF'.
g_tabname_header = 'it_header'.
g_tabname_item = 'it_items'.
START-OF-SELECTION.
PERFORM retrieve_data.
END-OF-SELECTION.
PERFORM build_fieldcatalog.
PERFORM display_list.
FORM build_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_header
i_structure_name = 'ZVEND_HEADER'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_item
i_structure_name = 'ZVEND_ITEMS'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "build_fieldcatalogHi Dan M.,
Please follow this...
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = w_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
is_layout = wa_layout
it_fieldcat = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = I_SORT
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = i_event
IT_EVENT_EXIT =
i_tabname_header = 'i_ekpo' <----
Pass here header table name
i_tabname_item = 'i_eket' <----
pass here item table name
I_STRUCTURE_NAME_HEADER =
I_STRUCTURE_NAME_ITEM =
is_keyinfo = wa_keyinfo
IS_PRINT =
IS_REPREP_ID =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab_header = i_ekpo -<<----
Pass here header internal table
t_outtab_item = i_eket <<----
Pass here item internl table
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
for wa_keyinfo:
You need to use common fields between header & item.
for ex:
wa_keyinfo-header01 = 'EBELN'.
wa_keyinfo-item01 = 'EBELN'.
wa_keyinfo-header02 = 'EBELP'.
wa_keyinfo-item02 = 'EBELP'.
Hope this can solve your problems.
Regards,
Tutun -
Excise duty rates are not displayed in J1IEX
Dear friends,
Excise duty rates (BED, ECS, SECESS) are not displayed in item level in excise invoice J1IEX, But excise values are updated correctly. I have maintained duty rates in J1ID. Kindly give your valuable inputs.
Thanks and Regards
ETR.Hi Maladri,
Thanks for your reply.
I have maintained my condition types BED, ECS, SEcess in respective fieslds of BED Condition, ECS condition, SEcess condition already, eventhough the % not updated in J1IEX Excise invoices.
But it has updated 10 days before all values came properly in J1IEX.
Can you explain which condition type we have to maintain in BED %, ECS%, SEcess % in Maintain excise defaults, I didnt maintain any condition types there. If it is the reason then how it updated correctly 10 days before?
Kindly guide me
Thanks and Regards
ETR -
I have restored my new replacement iPhone from my latest iCloud back up. However my camera roll pictures are not displaying. Its not saying I don't have any pictures in my camera roll, it has all the spaces for them, but it just shows empty white squares? How do I get my pictures back? Thanks!
It's difficult to say whether it's stuck or not as the time to restore a backup can depend on many factors. You'll have to decide when you think it's just not continuing. You could try turning the phone off (hold the power button until you see the red off slider, then slide to turn off), then back on to see if that would get it going again.
When you're convinced it's just hung, you can go back to settings and tap Stop Restoring iPhone to stop the restore. You'll then have to try restoring it again (Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens and when given the option, choose Restore from iCloud Backup). Be sure it's connected to your charger and wifi while it's restoring the backup.
You might also try the approach posted here by ezjules: https://discussions.apple.com/message/19518589#19518589. This seems to have worked for some people who had trouble restoring their photos from an iCloud backup. -
Search for member activities - points are not displayed correctly
Hi experts,
I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
Can anyone tell me why the points in the result list are not displayed correctly?
Thanks and best regards
AnneSometimes threads are deleted if they violate the Rules of Engagement. If that happens, you'll lose points that were allocated to you. Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this. I'd guess, it's more likely you'd responded to a post that broke the rules.
Really important
1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable).
2. Don't ignore rejection emails or other communications from moderators. They are followed up, and, if warnings are ignored, then accounts will be deleted. Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
matt -
Entity Descriptions are not displayed correctly in Combo box dropdown list
In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
Example:
'Entity A. LTD' becomes 'LTD'
'Entity B Inc.' becomes blank
It seems that everything before the dot is not displayed when opening the combobox.
It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
Does anybody knows the sollution or have seen this issue before?Hi,
This is a known issue with combo box list of values.
Please follow this workaround:
- Remove ComboboxLOV on Deptno
- Create an updateable transient attribute(Say Dname) of type String
- Define combobox lov with following values:
List Data Source: DeptView1
List Attribute: Dname
List Return Values:
Dname - Dname
Deptno - Deptno
UI Hints: Display Attribute - Dname
- Edit Dname(transient attribute) and provide following groovy expression
oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
Sireesha
Maybe you are looking for
-
Problems in creating Profit Center : Message KM019
Hi All, Please suggest the tcode for viewing the sap messages. I am creating profit center but system shows an error while assigning it profit center group. System shows an error that this profit center group cannot be assigned. I tried to assign ano
-
Dear All, How can we call web service from SAP? Thanks in Advance, Ramana
-
To populate value in the 2 field given the first field valu
hi, I got an answer from sdn i tried with my prg its not working can u tell me what mistake i have done. data: begin of iitab occurs 0. include structure dynpread. data: end of iitab. data: begin of rtab occurs 0. include structure DDSHRETV
-
I have a test and production server running Fedora Core 4, JDK 1.5.0.12, and Tomcat 5.5. On my test machine, the JRE finds the ZoneInfoMappings file correctly and all valid timezone IDs, including aliases, are found. If I rename the zi directory to s
-
My Photoshop CS5 for Mac stopped working. I got an error message stating that some of the components were missing and I should reinstall. I tried to reinstall using the CD, but I get the same results -- error message and no functioning icon. What d