NotificationExec pop-up after installing Free Agent Drive Manager

I've just installed the Free Agent Drive Manager for a Maxtor 4 One Touch. Now I'm getting a NotificationExec pop-up after installing Free Agent Drive Manager. I've trashed the drive manager but I can't seem to get rid of the pop up. Any suggestions?

Hi Todd,
That's incompatible software, and from reading other posts, it sounds like even the official uninstaller does not get rid of everything. Do a Spotlight search for file name "NotificationExec" and "Free Agent Drive Manager" and include system and invisible files. Trash the files you find, empty your trash and you should be good to go.

Similar Messages

Free agent drive installation help

When I try to reformat my external free agent drive I get an error message saying that it quit unexpectedly. Anyone know the problem?
I can't use my drive until it is reformatted.

That's not how you format the drive. Do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

I am having problem with Segate free agent drive.

Since I installed Mountain lion on my iMac 24" I am having problem with a previously installed Seagate drive. When I am in finder and click on the Free Agent drive, I get the following error. VTDecoderXPCService quit unexpectedly. I click reopen and a few seconds later I get same message. This did not occur when I was using Snow Leopard Very annoying. Any suggestions? Note I have many movies and important data on this drive and don't want to lose. What does this error mean and is there some way to correct?

http://changux.co/solving-vtdecoderxpcservice-quit-unexpectedly

After install of OS X ML, do I need to re-install Adobe Flash Drive Manager?

Do I have to re-install Adobe Flash Drive Manager? I do not see it after instaling ML.

If you own a license for License then you should be able to download it as needed.
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

"low disk space hp_tools" after installing HP external drive

I have this message displayed "low disk space hp_tools" after installing HP external drive with simple save. A new drive was created on my internal hard drive and apparently the allotted space is not enough. How do I get rid of the partition and the error message?

Install WinDirStat from below link and see whats consuming more space in E:\ drive and post results here with a screenshot
http://windirstat.info/wds_current_setup.exe
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Can I get my bookmarks back after installing new hard drive?

Can I get my bookmarks back after installing new hard drive?

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

Trouble with my free agent drive

hi
im having some trouble with my seagate freagent drive. ive been using it for about 4-5 months now but now when i just moved and plugged it in (ethernet) it worked but then the next time i retsrated my computer it wont show up on my desktop.. i tried plugging it in through usb AND ethernet and no go. i also unplugged the power and plugged it back in. the light is on on the free agent drive but it wont show up on my desktop.. any help?
i dont know too much about external harddrives, i only have mine to put all my music on it, so i feel like this could be some stupid idiot easy problem on my side haha, but let me know, thanks!

I'm having the same problem, and out of no where.I found this old forum http://discussions.apple.com/thread.jspa?threadID=1126326 which didn't work for me, but it might for you . . .

Remote backup to Free Agent Drive: OSStatus error -6602 ??

Reposted with minor edits from the Leopard section...
We are trying to back up our desktop Macs to a Seagate Free Agent disk locally attached to a Mac Pro running Mac OS X Server v.10.5.5. The desktop nodes are all iMacs running 10.5.6. When we try to set up Time Machine to use the remote disk, we get an error "Operation could not be completed. OSStatus error -6602"
We get the same error on 3 different nodes whether the disk is shared or NFS mounted. It is not that the Free Agent drive is in power saving shutdown as we have seen this error whilst Time Machine running locally on the Mac Pro was backing up to it. That backup, BTW, was successful.
At this point I wonder if this is some incompatibility with the Seagate firmware. Has anyone else encountered this problem? A quick Google search on the error code turns up scant information -- perhaps something to do with permissions, the details of which I'm not too familiar on Macs.

I may have found a solution... if I connect to the server from the remote machine I see the backup volume with a -1 appended to its name. If I first open that volume from the Finder and then try to set up TM, I can select the Backups-1 volume, authenticate as myself, and TM will back up to that volume. I'm not sure yet whether the connection has to be kept open somehow for unattended backups to work.

MBP 15" freezes up when in active after install of 500GB drive

Hi,
MBP freezes up when in active after install of 500GB drive, the details are:
MBP,
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
And the hard drive is:
Intel ICH8-M AHCI:
Vendor: Intel
Product: ICH8-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
ST9500325AS:
Capacity: 465,76 GB
Model: ST9500325AS
Revision: 0001SDM1
Serial Number: 5V****
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 465,44 GB
Available: 270,65 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
And it all freezes up only when i do no use it for about 10 minutes, dunno whats going on, please advise.
Message was edited by: Moderator

Is the Mac set to sleep the drive after 10 minutes or so?
What are the other symptoms with regards to your freeze? Does the screen go dark? Is the clock still running?
Luck-
-DP

Windows 8.1 doesn't hibernate or sleep after installing amd catalyst driver

hi i am using windows 8.1 64 bit but after installing a amd catalyst center windows behaviour changed it doesn't go for hibernate and sleep and after unstall it windows comes into normal position please refered me proper solution to install amd driver wihout any issue and also suggest me which version will be compatible with my device i have tried amd 14.9 and also 14.11 but issues didn't solve i am curretnly using intel Version10.18.10.3325 windows update show me amd wddi 1.3 driver but it always failed not installing..
Hp pavilion-15 n037tx Notebook
core i5 4200U
4gb ram
This question was solved.
View Solution.

Hi @Ahmed-Aslam
I understand that you are have problems with hibernate and sleep on your notebook.
I would review the attached document. I realize from your post that you have tried some of the things listed, but just check it and see if anything there was missed, perhaps the section on malware issues.
Troubleshooting sleep and hibernate issues in Windows 8
You can also try using system restore to roll back to before the software update to see if that resolves the issue.
Using Microsoft System Restore (Windows 8)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Hp mini 110 boot disk error after installing new hard drive and system recovery

Need help, HP mini 110 Windows 7 32 bit. using my recovery disks I created i was able to recover to the old 160 gb hard drive. After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.

If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
Can't get enough of this Envy...

How to move files after installing new hard drive

I am considering the installation of a new 80 or 100 GB hard drive. I purchased the new iLife 06 program but I do not have enough space to install on my present 60 GB unit. I only have 3 GB available. I've read all the posts involving the possible brands, downloaded the instructions how to swap out the units. My question is how to backup and install my files and applications so I may reinstall onto the new drive. Can I just copy my hard drive volume onto my external Lacie storage unit and then drag the volume back to the new hard drive after booting off my OS disk? Any advice on how to move my apps and files? Do I need to purchase cloning software?

The easiest way is buy an external firewire enclosure and put your new drive in it. Then format your new drive. then use Carbon Copy Cloner to copy your internal drive onto your new drive. Then install your new drive and put your old one in the enclosure. You are now in business with an external backup on your old drive.

How do you upgrade OS X server 4.0 to another drive after installing on primary drive

I've upgraded OS X Server to version 4.0 after installing the Yosemite OS X. As usual, the server does not work properly after the upgrade. I've installed Yosemite on another boot drive to rebuild the system. I'm trying to upgrade the new install of Yosemite to the Server 4.0 version but when clicking the upgrade button, it just sits there with the wheel spinning. Has anyone seen this and how can I get the copy downloaded again to install version 4.0 of OS X Server?

I appreciate both of your prompt replies. According to the following support page (http://docs.info.apple.com/article.html?artnum=107037), I only needed OS X 10.1 or later (more specifically, it says that 10.0.X or earlier cannot be upgraded without erasing). This page was directly referenced by this page (http://docs.info.apple.com/article.html?artnum=301270) which is on the very post that Ferd referenced ("10.4 Tiger Upgrade: Decision tree+Checklist" at http://discussions.apple.com/thread.jspa?threadID=121773). I can find nothing on official Apple websites that says anything about needing OS X 10.2 to upgrade to 10.4. The bottom line is that most of my harddrive is consumed with my music (approx 15 MB) and there is no convenient way for me to back it up or move it without buying an external hard drive. It just seems absurd to me that in order to use my new $300 iPod that I need to both invest $120 in new software and then another $100-200+ in an external hard drive so that said new software can be installed over my existing data. It's really bad enough that Apple gives you no charger and no case for the iPod, charges you for new software versions, and then makes their new software so incompatible that you have to erase your hard drive just to install it. Exactly why do people love their Macs over their PCs? If I have to buy an external hard drive, why shouldn't I simply take all my data off of my iBook and be done with Macs forever?

GNOME3 is not working well after install the nvidia driver

I changed my graphic device from intel (integrated in i5 sandy bridge) to nvidia (GTX550 Ti).
When I reboot my PC, an error about GNOME failed something was showned.
I ignored it and installed nvidia package using pacman.
After that, I installed new nvidia driver but GNOME is not working properly.
Terminals which I can see when type ctrl + alt + function key are not working either.
This is part of my desktop screenshot.
http://s18.postimage.org/gew6dx5gp/screenshot.png
How can I restore GNOME?
Moderator edit: The included image is too big. It has therefore been reduced to its URL. Please also have a look at these screenshot posting rules.
Last edited by bernarcher (2012-04-05 09:38:39)

I have no big issues with gnome3 and nvidia, in case you haven't, make sure your xorg.conf is correct or you can let nvidia make it for you, just backup/delete your current one (if any) https://wiki.archlinux.org/index.php/NV … figuration

Error message after installing external zip drive

After installing a replacement zip drive (and accompanying software from CD), I'm confronted with a periodic error message advising that hardware has not been closed properly disk ejected prior to removal? I'm not removing anything--the zip disk is remaining in the external drive. I've turned off all power, rebooted and reinserted USB connections and the error message keeps coming up periodically. Iomega web site isn't much help. An suggestions, please. Thanks.

Thanks for your quick reply! I was wondering if anyone would reply!
I made the copies on a suggetion that the original may be scratched or something so I figured what the heck? I did format the hard drive though. It is a Seagate 500gb hard drive. I only formatted the whole drive and figured that the restore disks would make the additional partition.
Aside from that, it's the same error message that I had on the original drive. The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean. What can be causing the error message, and what IS the error message?
Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
Thanks again for replying!

NotificationExec pop-up after installing Free Agent Drive Manager

Similar Messages

Maybe you are looking for