Notifications and auto-start for Droplets ?

there is no way to set a notification when a batch is done... it can be done in Compressor by selecting an action and running a workflow... which is cumbersome by the way, I mean, can't we just get a notification center alert automatically ? ... in droplets there is no way to notify when a batch is finished.. in droplets there should also be an option to start batch automatically, without having to see the droplet window and clicking on "Start Batch"..

We are all hoping that Notifications support is added to Compressor in an update soon, it is not yet supported as it is in FCPX.  Fill out the feedback form and request it.
http://www.apple.com/feedback/compressor.html

Similar Messages

  • There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.

    HI
    in sharepoint 2013 WFE servers event viewer i receive following error many times
    Log Name:      Application
    Source:        Microsoft-Windows-IIS-W3SVC-WP
    Date:          4/14/2015 2:23:56 PM
    Event ID:      2303
    Task Category: None
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      TSharepint2013.test.com
    Description:
    There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.  Some application services may not have been processed correctly.  Please check the configuration for application
    service auto-start for the application(s) assigned to this application pool.  The data field contains the error code.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
        <EventID Qualifiers="32768">2303</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
        <EventRecordID>183840</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>Application</Channel>
        <Computer>TSharepint2013.test.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
        <Binary>02000780</Binary>
      </EventData>
    </Event>
    adil

    HI
    in sharepoint 2013 WFE servers event viewer i receive following error many times
    Log Name:      Application
    Source:        Microsoft-Windows-IIS-W3SVC-WP
    Date:          4/14/2015 2:23:56 PM
    Event ID:      2303
    Task Category: None
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      TSharepint2013.test.com
    Description:
    There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.  Some application services may not have been processed correctly.  Please check the configuration for application
    service auto-start for the application(s) assigned to this application pool.  The data field contains the error code.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
        <EventID Qualifiers="32768">2303</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
        <EventRecordID>183840</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>Application</Channel>
        <Computer>TSharepint2013.test.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
        <Binary>02000780</Binary>
      </EventData>
    </Event>
    adil

  • Partition failing and auto-starting

    Hi,
    Can anybody help regarding this problem
    We have problem in our production environment regarding the partitions.
    one of our partition(partA) crashing and auto starting frequently.
    We were not getting any information (exceptions) in the log files.
    We set some flags(memory and user defined) and checked the log files
    eventhough we haven't got any messages or exceptions.
    The partA having 3 Service Objects doesn't have DB conections.
    Client partition will call this partition(partA) and from
    here it will go to
    the another partition(partB) to talk with database.
    The partA doesn't have replicates and
    partB has 6 replicates.
    All Server partitions running on UNIX
    Client Partition running on NT.
    Forte 3.0.M.7
    Thanks,
    Satish.

    @Gran
    If you have carried out a FOTA update, re-installing existing device software upon N9 with http://betalabs.nokia.com/trials/nokia-suite-beta can be worth a try, sign in with Nokia ID & password.
    Happy to have helped forum with a Support Ratio = 42.5

  • Error in Setting Auto Start for Oracle DB on Sun Solaris 10

    Hi Gurus,
    I am trying to set my DB to auto start when server reboots. Fllowing is my setting and the error. The issue is that the DB starts but LISTENER is not running...
    Please please help me...
    This is what I used for setting the auto start.
    Thanks,
    Jayant
    SETTING:
    =======
    #!/sbin/sh
    #Match ORACLE_HOME with whatever is in ~oracle/.profile!!!
    ORACLE_HOME=<whatever is Orcale home is>
    case $1 in
    start)
    su - oracle -c $ORACLE_HOME/bin/dbstart
    su - oracle -c "$ORACLE_HOME/bin/lsnrctl start"
    exit 0
    stop)
    su - oracle -c "$ORACLE_HOME/bin/lsnrctl stop"
    su - oracle -c $ORACLE_HOME/bin/dbshut
    esac
    You're not done yet! You now have to dl
    ln -s ../init.d/oracle /etc/rc3.d/S95oracle
    ln -s ../init.d/oracle /etc/rc0.d/K15oracle
    chmod 0755 /etc/init.d/oracle
    ERROR:
    ======
    LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 02-DEC-2006 10:09:24
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Message 1070 not found; No message file for product=network, facility=TNSTNS-12545: Message 12545 not found; No message file for product=network, facility=TNS
    TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
    TNS-00515: Message 515 not found; No message file for product=network, facility=TNS
    Solaris Error: 2: No such file or directory
    root@zngds1gk #

    Bingo.... I got it.
    Thanks for your hint about the ./.profile. I was setting env variables in .cshrc file and my default shell for "oracle" user was sh.
    Then I changed the default shell for oracle user to csh and viola..... it works.
    root@zngds1gk # su - oracle
    $ id
    uid=100(oracle) gid=101(dba)
    $ setenv
    HOME=/space/oracle
    PATH=/space/oracle/app/oracle/product/10.2.0/Db_2/bin:/usr/bin:
    LOGNAME=oracle
    HZ=100
    TERM=xterm
    SHELL=/bin/sh
    $ exit
    root@zngds1gk # usermod -u 100 -s /bin/csh oracle
    root@zngds1gk # su - oracle
    zngds1gk%
    zngds1gk% setenv
    HOME=/space/oracle
    PATH=/space/oracle/app/oracle/product/10.2.0/Db_2/bin:/usr/bin:
    LOGNAME=oracle
    HZ=100
    TERM=xterm
    SHELL=/bin/csh
    zngds1gk% cat .cshrc
    umask 022
    setenv ORACLE_BASE /space/oracle/app/oracle
    setenv ORACLE_SID adm
    setenv DISPLAY 47.102.212.108:0.0
    setenv ORACLE_HOME /space/oracle/app/oracle/product/10.2.0/Db_2
    setenv PATH /space/oracle/app/oracle/product/10.2.0/Db_2/bin:$PATH
    And now it works...
    Thanks.
    ~Jayant

  • Yosemite and auto start

    Does anyone know how to to set up an application to auto start on boot up?
    Doesn’t seem to work in Yosemite….you set it up….but when it reboots nothing changes
    Thanks for any help
    Marilyn

    Go to System Preferences > Users > [your username], tap on Login Items in the right pane. If the app you want to load isn't listed, you can click the "+", navigate to the app and tap "Add". Is this the procedure you are following?

  • Auto start for all services under solaris 10 ?

    Hi,
    Can I set the oracle auto start ? include listener, sqlplus...etc.
    Thanks.

    Hi,
    Yes I am using oracle as id.
    here is the output:
    solaris10% pwd
    /export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/bin
    solaris10% sh -x ./dbstart
    + :
    LOGMSG=logger -puser.alert -s
    + trap exit 1 2 3
    SAVE_LLP=/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/lib:/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/network/lib
    ORACLE_HOME_LISTNER=
    + [ ! ]
    ./dbstart: test: argument expected
    solaris10%
    By the way, here is my environment variables setting:
    solaris10% env
    HOME=/export/home/oracle
    PATH=/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/bin:/usr/bin:LOGNAME=oracle
    HZ=
    TERM=xterm
    SHELL=/bin/csh
    MAIL=/var/mail/oracle
    LANG=C
    LC_CTYPE=C
    LC_ALL=C
    TZ=Hongkong
    PWD=/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/bin
    USER=oracle
    DISPLAY=solaris10:0.0
    ORACLE_BASE=/export/home/oracle/u01/app/oracle
    ORACLE_SID=orclnew
    TMP=/export/home/oracle/tmp
    TMPDIR=/export/home/oracle/tmp
    ORACLE_HOME=/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3
    LD_LIBRARY_PATH=/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/lib:/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/network/lib
    ORATAB=/var/opt/oracle/oratab
    solaris10%
    Thanks.

  • My ipod wont tell me when i get new notifications and it started happening right after i updated it

    after i updated my ipod it wont tell me when i get new notifications and it says i shuld sync it to itunes i did that and im still not getting new notifications also my imessage and facetime aren't working
    Message was edited by: max83636893

    Go into your settings, are the push notifications turned on? Same with messages.

  • Is there a way to create a rule that sends and Auto Response for a shared mailbox?

    I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
    [email protected]
    [email protected]
    [email protected]
    I would like to create a rule that would send an auto response when someone emails one of these addresses.  However, I don't want an auto response sent to [email protected] so I can't just set up an "out of office" reply for the mailbox.
    Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
    Nate

    Hi 
    we can enable the shared mailbox in ADUC and create Outlook rules for it in Outlook to achieve it. please follow these steps:
    1. In Active Directory Users and Computers, right-click the shared mailbox and click Enable Account.
    2. Configure the Outlook account for the shared mailbox in Outlook.
    3. Click Rules > Manage Rules & Alerts.
    4. Create a rule like the following format:
         Apply this rule after the message arrives
         Have server reply using a specific message
         Except if the subject contains specific words
         Select exception(s) (if necessary) of the Outlook Rule - (“except if from people or public group“)
    5. Apply the auto reply rules for this shared mailbox.
    Then users can receive auto reply of the shared mailbox except the exceptions we have set  when they send messages to this shared mailbox.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

  • Jabber 9.0.2 cloud deployment and Auto-Start options

    We're getting ready to roll out Jabber 9.0.2 to about 2,000 users in a Cloud scenario (WebEx Connect + SAML).  We have our software deployment package set and tested, but we are unable to programatically tick the 'Automatically start Cisco Jabber when my computer starts' check box.  Since we're not running anything on-prem, I don't think we can do anything with a jabber-config.xml, can we?
    Thanks!

    Hi,
    In the 9.1 release of Jabber for Windows, there will  be an option to configure it via jabber-config.xml file but that will  still require the manual start of client atleast once. So the only  seemless option is to add it to the 'Run' registry folder as Aaron  mentioned in the above post.
    Selecting/unselecting the option "Automatically start Cisco Jabber when my computer starts" in Jabber options creates/deletes a system registry in Run folder:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run]
    Key Name = Cisco Jabber
    Key Type   = String
    ValueData  = "C:\Program Files (x86)\Cisco Systems\Cisco Jabber\CiscoJabber.exe"
    Thanks,
    Maqsood

  • About notification and auto forward

    Hi all,
    i'm new on nw-bpm
    1. (send a message to let the requester know if the task has finished successfully in the end)
    Could BPM use u201CNotification" tab in UWL?
    if yes, which element should i choose in process composer of NWDS?
    or i have to do some coding to send one "Notification"?
    2. Could i set auto forward to make my SMTP mailbox receive the Notification at the same time?
    Thanks and Best regards,
    Fisher

    Hi Fisher,
    1. BPM doesn't support UWL Notifications so far. What you could do is implementing a Web Service which creates UWL Notifications via UWL API ([Link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/802bfda2-8a85-2b10-9290-d67da32d0c01?quicklink=index&overridelayout=true]).
    2. You could use static notifications to send eMails to potential owners of a task [Link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd5f0c-74ab-2c10-f79e-98d7869db972?quicklink=index&overridelayout=true]
    Best Regards
    Andreas

  • Safari auto starts for no apparent reason

    Having problems with Safari 3.1 automatically starting on my second user profile on my iMac. Under this user profile, no matter what I click on the screen, it opens Safari. When I quit or shut down Safari, it automatically starts up again and prevents me from using any other function. Anyone have an idea on how to resolve this?

    If you're using the mouse, It's the double tap with one finger gesture (smart zoom).  You can turn it off in System Preferences > mouse > Point & click.   There is also a gesture for the trackpad.
    Captfred

  • Back-up and New Start for my iBook

    I have an iBook (Power PC G3) which is running on Mac OS X 10.1.5 at the moment and struggling with that. I have just got an external firewire hard drive and an extra 256 MB RAM to help it along, and am now considering how best to back up what's on it, completely clear it and restart, possibly with a newer OS. As I've never done anything like that before I would be very grateful to anybody who can give me directions on how best to do it.
    I have also heard that partitioning the hard drive could be a good idea, to put the OS and software on one partition and my files on another - is that to be recommended? Is there anything I need to be careful of? Do I also need to partition my external drive for the back-up? I already have some files on it - would I have to put them on a CD first and reformat?
    What's the best way of backing up my files and programmes? Can I just copy my hard drive to the external drive or do I need to use a special programme to make a backup?
    Thanks in advance for your help!
    Sarah

    Sarah:
    How large is your internal Hard Disk Drive (HDD)?
    How large is your external FireWire HDD?
    Some observations:
    Good move getting an external HDD. The larger the better.
    If you have a very small internal HDD you might want to replace that eventually.
    Creating partitions, if you have a very large external, can be useful. However, it is not a good idea to put your OS, applications or data on different partitions. It has a number of drawbacks. One of them is that as your data grows if you need the space that is on one of the other partitions, you have a real problem. Another, the whole OS is designed to work together, and is more efficient if the OS, applications and data are on the same partition.
    I have my external FW HDD set up so that I have a partition of the size of my internal HDD for backing up my internal HDD. I have a partition on which I have the previous OS installed. I have one that I call Scratch, but for moving things around or storing odds and ends etc.
    You need to upgrade your OS to a more stable version of OS X. I suggest Panther (10.3x) but your computer will support Tiger as well (10.4x) Here are the minimum system requirements for Panther, and for Tiger. You will need to purchase the Full Retail version of Tiger or of Panther . Be aware that Computer specific or upgrade versions should be avoided as they can cause problems. Besides, it may be a violation of the Software License Agreement which statesThis License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...Tiger can be purchased from the Apple Store and Panther (or Tiger on CDs) from applerescue.
    Finally, how to backup your internal HDD to your external Firewire HDD. The preferred method is to clone your entire internal HDD using a utility like Carbon Copy Cloner(CCC) or SuperDuper(SD). You will first need to format your external HDD using Disk Tuility (post back for more help with this). Make sure that the Volume Format is Mac OS Extended. When you use either CCC or SD, make sure you select the option to Make Bootable.
    So much for now. You are on the right track. Post back with further questions or comments.
    Good luck.
    cornelius
    Message was edited by: cornelius

  • Push Registry and Auto Start

    I need to set and alram using Push Registry that will survive after the phone is turned off and turned on again.
    Can I register more than one alarm at a time or do I have to register alrams one by one?
    Thanks

    I need to set and alram using Push Registry that will survive after the phone is turned off and turned on again.
    Can I register more than one alarm at a time or do I have to register alrams one by one?
    Thanks

  • Auto Starting E530c and E545 laptops

    I have been trying for ages to get both of these models to auto start for updating purproses. These machines are stored in a cart so no matter what route I took, I enabled them to stay on even when the lid was closed. This cart is wired with network and power to each laptop as well. The routes I have taken:
    1. Wake on Lan. At best this works 20% of the time. I set each laptop up, test it and then put it back into the cart. Once the cart is full, I do a full WoL test and every single unit turns on. I leave for the night and let the scheduled task try to turn the laptops on overnight... most don't. I have been pulling my hair out, changing settings all over the place but it always works in limited tests but then never works in mass.
    So I looked into other options:
    2. RTC Alarm (aka: Auto power on at a certain time in bios)... but this setting is not in the bios. At least, I can't find it. If it is there, please let me know. There is a good chance I am blind!
    3. I would even take just auto turn on when AC power is plugged in. Again though, I can't find any option in the bios for either unit.
    So... is there some secret setting to making WoL work all the time? Is there a RTC alarm setting in bios? Is there an auto turn on when AC power in bios? Any of those solutions would work for me!
    Thanks!

    I was wondering if was something to do with VLANs being mucked up, since I only use 4 (it tells me I can't use more than four if I try to use more), plus it used to all work until a power interuption.. hah!
    would removing vlan.dat then a reload  force the router to re-write without any suspected problems ?
    I've just pulled off all the encryption, and vlan3 works, but simple wep back on... and the client can't see the dhcp-offer going back....

  • Elements 12 and auto-blend layers

    Hi,
    I've seen references to using photomerge and auto-blend for focus stacking in Elements - however I cannot locate this option in my v12 installation. I'm thinking this might be for one of the following reasons:
    1) I'm not looking in the right place
    2) What I've seen online may be referring to other versions of Photoshop (i.e. CS) and *assuming* elements has it as well
    3) It used to be available in Elements but was removed or renamed
    Any ideas which is the case?
    Thanks!

    Have a look at this thread at elements village.
    http://www.elementsvillage.com/forums/showthread.php?t=77567

Maybe you are looking for

  • Standard And Customized BEx Reports & workbooks for the Modules FI,SD,MM

    Hi..All Can any one explain about Standard and customized BEx Reports and workbooks which were frequently used in implementation projects for the modules SD,MM and FI? Thanks & Regards Jonn

  • Full internet routes in MPLS-VRF

    hi~ all I just have some confused , whether it's good way load full internet routes in MPLS VRF , which there's no any service routing in core network but topology routing . but there's dual upstream ISP connecting ASBR , I'm afraid if I load these t

  • ORABPEL-09903 when deploying BPEL project

    Hi, When I am deploy a BPEL project, below error is reported: C:\jdevstudio10133\jdev\AppsCreateOrder\AppsCreateOrder\build.xml:79: A problem occured while connecting to server "col-hydra2" using port "7777": bpel_AppsCreateOrder_1.0.jar failed to de

  • MenuBar in Applet using AWT

    I want to create menu in applet that uses only AWT components. (applet will be run inside HTML page, not in separate window) Method setMenuBar released only in Frame class. So problem is how to get current frame of applet correctly. To get current fr

  • Perian 1.1 + 10.4.11 + QTP 7.4.1 + FLV = Crash

    I know, I think so, this is a Perian issue, but there's always good people here with wonderful ideas to beat strange problems. Since Perian 1.1 it's on my Mac I can't see FLV files, Quictime jumps onece, then it's dead, crashed. Any clue? At Perian f