Notifications are not sent to some users, even after the status is green.

Hello
There are some notifications sent to many(4 to 5 users and i am one of them) users from the SAP system. And i can see in the SCOT transaction that the notifications are sent successfully to all the users. Status is Green(transmitted). But,the issue is that, Some users are getting the notifications and some(Incliding myself) are not.
The users who has mail id say for example  [email protected] are getting the notifications within no time but some usres who has maild id like [email protected] are not getting the notifications even after a day.
There are two Nodes are active in the SCOT transaction, One is SMTP and other one is Dummy.
In the address area of the Node SMTP, around 11 users mail ids are maintained, which includes both type mail ids xxxxxxx@xyz and
[email protected]
And the * (star) is maintained in the address area of the Node Dummy.
Can you please give me some clue which can help me in resolving this issue.
Thanks for your time.
Chetan....

Hello Balaji,
Thanks for your inputs.
As i informed that, there are two nodes active in the SCOT transaction. Address area of the NODE A is already set as '*'. So, it was not possible for me to set the start * value in the address area of the NODE B. I dont think its possible to maintain * in Both the NODES.
In the Node A, we have maintained * and in the Node B we have maintained some users mail ids. Because, as this is Quality system we dont want everyone to get the notifications.
Thanks for your inputs.

Similar Messages

  • Am I correct in assuming that the NIKON D810 can still not be tethered in Lightroom even after the 5.6 upgrade

    Am I correct in assuming that the NIKON D810 can still not be tethered in Lightroom even after the 5.6 upgrade ?

    ...And google says:
    Tethered camera support in Lightroom

  • Line items are not appearing for some users

    Hi
    In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
    Regards
    John.

    Hi,
    What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
    Please clarify your issue.
    Regards,
    RS

  • WIs  are not sent to any user

    Hi,
        We are working on CRM 5.0 and have created a custom rule for a workflow. When we simulate this rule, it returns 3 users but when workflow is triggered, Possible agents and Actual agents are blank.
        We are able to see the WI only through SWEL. If the agent determination did not fail then what could be the problem ?
    Thanks,
    Shounak

    hi,
    the list of agents are classified into 3 types
    1. Responsible agents
    2. Possible agents
    3.All agents.
    If the task created is of type general task, it gives a list of responsible agents using the rule determination.Only one of them can execute the workitem,then he/she becomes the actual agent and the rest becomes the possible agents.
    if the rule resolution is not failed,then check after which the workitem is being sent or not.May be there is some issue in sending the workitems to the user.
    Use transaction SWUD, inorder to check the workflow and transcation SWI2_ADM1 to check whether the workitem has agents or not.
    Hope this helps.
    Regards,
    Saujanya

  • Special characters in SBWP dynamic columns are not showing for some users

    Hi experts,
    We have set up a dynamic columns for business workplace. One of the field displays the comments entered by the user. Some users are able to see the values entered perfectly. But for some users, if we enter special characters like @gopal, it is not displaying the value in dynamic column.
    Are there any workflow/user settings need to be changed.
    Thanks
    Gopal

    I had the same issue, you should check the link between AD and CRM, so you could make a new user in AD and connect your CRM account with it, then you should return the old AD account back. It worked for me, try it :)

  • After upgrading to 5.0.2, notifications are not shown on lock screen - even missed calls

    I need to enter the pin everytime just to check for messages, mails, missed calls etc. Any fix for this?

    I have exactly the same problem - but only after connecting my phone via exchange active sync to our companies server.
    all lollipop useres except for the sony users don't have this problem.
    settings (of all, only non sensitive, no notifications shown) don't make any difference.
    My boss contacted someone at support and got some feedback that needed him to reset phone to initial, and "repair" it via companion. Did work for him (Z3), doesn't work for anyone else...
    looking for a solution desperately since i have several people to service... and no idea how to solve this...

  • I purchased some songs on my mac book air and they are not available on my Mac even after some days and running Match

    Hi,
    I purchased some songs on iTunes using my mac book air. I tried to play them some days later on my Mac but are not available. I tried updating /  running Match no joy.
    any ideas?
    thanks,
    Kim Johnson

    Thanks for the response. That was helpful. However, I still want to know why did the songs I purchased yesterday appear on my IPod for downloading but the those I purchased today did not? After you rassistance I went to settings and turned on automatic downloading for my ipod. So if it wasn't enabled yesterday, how was I able to see the purchases I made yesterday on my computer on the ipod and then download them to the ipod? That is what I expected to see today but all I was seeing were the songs I purchased yesterday and not the ones I did today.

  • New computer has been loaded with old Itunes library but a number of earlier purchases say they are not "authorized" on this computer even though the bulk of my library works-- this is only about 5% of the total but were all purchased 9/18/2008 or before?

    New computer has been loaded with old Itunes library but a number of purchases prior to 9/18/08 are not "authorized" when I try to play them.
    They are all items I purchased from Itunes but they won't play any longer even though they show in my Itunes library.
    Doesn't work when I enter account info and password either.
    This is only about 5% of my library and many purchased items play no problem.
    Any help would be appreciated.

    Two words, Migration Assistant. It will transfer files between two Macs using a firewire cable automagically.
    http://www.apple.com/pro/tips/migration.html
    Three words, Target Disk Mode. Use a firewire cable to connect two Macs and then hold down the T key when you boot the Mac you want to transfer files from, G4 Tower. It will appear as a hard drive on the desktop of your Macbook Pro. Then you can just drag and drop the whole folder.
    http://docs.info.apple.com/article.html?artnum=58583
    Message was edited by: Jon Thornburg

  • FileReceiver communcation channel inactive even after the status  is Active

    Hi,
    i am not able to find whats the problem. i have activated the communation channel and the status is also Active. still when i do a CC monitoring it shows as the CC is inactive.
    i have refereshed the cache.
    CPA referesh is also done
    modified and activated again and again
    object is not locked
    can some one tell what can be the problem

    HI Deepika,
    Is the yellow status is just for your CC or for all File receivers ?
    If its just in your case, try to create a new Receiver CC and see if it helps.
    Thanks,
    Pooja Pandey

  • My responses are not coming back to me even after they have been submited

    I have created a fill in form and have distributed it on a web page.  It can be opened and information filled in. When they hit the submit button - It states that it hase been submitted. I don't receive any of them. What can be my problem?

    How do you figure this is a Thunderbird problem? Thunderbird hands the email off to your providers SMTP server and then it is done. It has no control over what the servers that the message pass through do with it.

  • Macbook screen not working, now it is, even after the service centre told me it needed replaceing, what gives?

    My son's Macbook was taken to the local Mac service centre as the screen had suddenly gone blank.
    I was told that the screen needed to be replaced.
    This evenimng my son opend it up and hay it's working again.
    Could anyone tell me if the Service centre has been pulling my chain or was it just a loose conection after all?
    Cheers
    Jon

    Hi Jon
    I think you're being somewhat unfair.  The repair guy can only give a diagnosis from the information he has available at the time, which was a completely dead screen. The screen springing back to life is new information he didn't have.
    I can't comment on the $115 charge. As with car repairs, it's always cheaper to do your own, but laptops are at least 10 times more difficult to repair than desktops. I'm happy to dive inside a desktop computer but I've always left laptops to the professionals.  I'll also add that I always buy the extended warranty for a laptop.
    Bob

  • Notifications are not being sent when Bulk Load is done

    Hi All,
    I have OIM 11g setup on my machine. I use the bulk load utility for loading the user data. Now in my OIM setup, the notifications are being sent for all stuff like Reset Password. New account creation and other. However when I bulk load the users, notifications are not sent to their mail ids. I am running the scheduled job "Bulk load Post Process" which is necessary so that the users are synced to the LDAP repository. I have the LDAP Sync option checked and also the Notifications option set to yes in this scheduled job. Though the users are loaded successfully and are synced properly, the notifications are not sent. Can some one please guide me as to what could be the problem here?
    Thanks,
    $id

    The code is probably only called in the Event method of the event handler that sends the notification. You can check the mds files and find the notification you are looking for and then use a code decompiler to find the class that is called. You can then use this code as a sample, or write your own notification code and create an event handler that runs in the BulkEvent.
    And on another note there is also this System Configuration Variable: Recon.SEND_NOTIFICATION which is set to FALSE by default.
    -Kevin

  • SUS - MM Scenario: notification mail not sent to all Supplier Users

    Hi,
    we're in a SUS-MM scenario and we publish Purchasing documents (PO and/or SAR) to SUS portal.
    The notification mail for new published documents are sent only to the e-mail address of the Supplier (imported from SAP to SUS) which is in the SAP Supplier Master data. But if the Admin supplier creates other users for the supplier (F1 / F2 / F3), the notification mail for new published PO/SAR are not sent to the mail address of F1 / F2 / F3 users. Is it the standard behavior or is there some missing customizing setting missing?
    Our customer wants that notification mail are sent to all the mail addresses of the Supplier Users.
    Has someone had this kind of requirement? and, if it is not achievable via standard customizing, which could be the right solution to meet this requirement?
    Thanks in advance

    Hi,
    This is a standard SAP process which SAP has provided,
    The other way is to develop a custom program,
    1) Select the Supplier.
    2) Check the available contact persons of the Supplier.
    3) When a document is created in ECC (Hope you are in MM-SUS), select the list of contact persons for Supplier. (I assume need a RFC FM to develop to SUS)
    4) Send a e-mail to all users linked with this Supplier.
    You can find the linked Contact persons in BP transaction and Table BUT000.
    Please change the Status of the Issue once your problem solved, other will get benefitted. If possible post the soulution.
    Thank you,
    Anil

  • Mail notifications are not getting sent from a Calendar client

    Mail notifications are not getting sent from a Calendar client
    <p>
    On the client, after creating an event and electing to send a mail notification,
    the following error appears in a pop up box:
    "module:mailmsg.ctp,label 190, service error"
    Also, in the /users/unison/log/cws.log file on the Calendar Server, there is an
    error from the corresponding time that the client receives one:
    DEXOTEK ERRCODE Ox132B0 -> CWTCP_RemoteSecurityModified: RNC_SecurityModified
    -> Request 0x443 for NodeId 10002,
    status set to CANTSERVICE
    Solution:
    If this is only happening for one user, then check for the presence of a dbv.log
    file in the /users/unison/log directory. If present this implies db corruption
    and the /users/unison/bin/unidbfix tool should be run.
    Note: For details on "unidbfix", please read the man page and also the online
    Calendar Administrators Guide.

    I am having the exact same problem sending through a comcast smtp server to a mac.com email address:
    Reporting-MTA: dns; qmta11.emeryville.ca.mail.comcast.net
    so some problem they are having in emeryville today? I too am waiting for it to clear up.

  • SahrePoint 2013 Server & Project Server 2013 - Notifications and reminders are not received by certain users

    Dears,
    We have recently implemented MS EPM 2013 where we started to face some strange behavior with the standard alerts and reminders sent from the system.
    Minor number of the users (with different levels of privileges from administrators to team members) are receiving emails and alerts normally (either when they are assigned on project schedule tasks or SharePoint list items alerts) without any issues however
    the. on the other hand the other majority number of resources are not receiving any kind of alerts from the system (neither from Project Server Nor from SharePoint).
    knowing that, all the resources/users have their emails configured properly, and their other attributes are almost the same for all users. all the emails are stored on the same exchange server.
    Anyone can help on this please.
    Appreciate your cooperation.
    Ibrahim Al-Masri Technology Manager at MethodCorp

    Thanks Dinesh, 
    Actually the users have this global permissions configured for them and yet they weren't receiving emails.
    We Just could solve this puzzle, all what we needed to do is to configure the
    RBS for the majority for the users who weren't receiving emails. 
    Welcome to EPM 2013 UN-unannounced changes.
    Ibrahim Al-Masri Technology Manager at MethodCorp

Maybe you are looking for