Notifications not reflected in EP 7.0 in MSS. ECC 6.0 is Backend

Hi Gurus
We are implementing ESS/MSS in EP 7.0. In UWL We are able to see work items generating in Tasks tab. But in Notification tab the notifications which were shown in backend were not reflecting in the EP 7.0. There is no error message displayed.Please give your valuable inputs to resove the same.
Thanks and Regards
Harikiran Sahukaru
SAP-BASIS

Hi Nicholls ,
I already added in the Alias, the problem happened in ITS connection, which is working fine in EP 6.0.
In EP 6.0.
ITS Connection
Test Details:
The test performs the following:
1. Checks the validity of the system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check if the system object has a valid system alias
4. Checks if a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (https) ITS Host Name (itsw1d11.pm2s.com:xxxx)
6. The host name itsw1d11.pm2s.gov.sg was resolved successfully.
7. An HTTP/S connection to https://itsw1d11.pm2s.com:xxxx/scripts/wgate was obtained successfully.
Error in EP 7.
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (https) ITS Host Name (itsw1d11.pm2s.com:xxxx)
6. HTTP/S connection failed
Edited by: Feng Guo on Dec 15, 2008 11:29 AM

Similar Messages

Query Customization Not Reflecting in POWL WD ABAP

Hello All,
We are customizing Powl in MSS for CATS and Leave Management. Changes done in POWL_QUERY are not reflecting in POWL Application.
In MSS we have done following customization in POWL:
We are using query MSS_POWL_CATS_APPROVAL_1 for CATS approval and we are enabling search criteria through query parameters by
ticking search checkbox. We have also cleared powl cache by running POWL_D01.
2. Changes done in Powl_Query transaction are not getting reflected in Powl Application.
We have changed the Admin layout in leave approval query MSS_POWL_LEA_APPROVAL using configuration mode ( sap-config-mode
= config ) in layout variant and assigned a new layout to leave approval and cleared cache (POWL_D01 report) but still changes are not reflected in POWL.
Looking forward for your support. Any help will be highly appreciated
Regards,
Nishant Gaur

Hi.
Please try.
SQ01
Input query ID.
menu-Query-More functions-Generate program

Changes are not reflecting in Quality server

Dear All,
We have recently installed the Portal 7.4 servers.
Currently we are having two servers Development and Quality.We have Configured NWDI using CMS and created tracks(Defined run-time systems as Development and Consolidation) we are able to checkin the activities at NWDS , when we are selecting the component in the consolidation and on click of import we are getting the message as import finished, but the changes are not reflecting at the Quality server. i.e in earlier 7.01 version when we imported , the ear was deployed automatically in quality but it is not getting deployed in the new version 7.4
Regards,
Ramana.

Dear Ervin/Jun Wu,
Thanks for the Responce.
As per the given link the track is configured with out any issues (When we are clicking on Deployment in the Transport studio it is opening new tab like below and we are not having any errors when we click on Start deployment nothing is happening)
http://hostname:50000/webdynpro/dispatcher/sap.com/tc~SL~CMS~WebUI/Deployer?BS=EPD_PRTADEV_C
Please check the below log regarding deployment when we do the import
SDM-deployment-notification Log file.
20141028125231 Info :Starting Step SDM-deployment-notification at 2014-10-28 12:52:31.0994 +5:00
20141028125231 Info :Deployment is performed asynchronously.
20141028125231 Info :Following DCs are marked for deployment (buildspace = EPD_PRTADEV_C):
20141028125231 Info :
20141028125231 Info :RequestId: 152
20141028125231 Info :==> no resulting DCs for deployment
20141028125231 Info :Follow-up requests:
20141028125231 Info :
20141028125231 Info :
20141028125231 Info :Step SDM-deployment-notification ended with result 'success' at 2014-10-28 12:52:31.0995 +5:00
Regards,
Ramana.

QM03-Custom tab-Change to text field not reflecting-FG - XQQM-screen-0106

Hi,
I have a requirement to change the text field on a custom tab of QM03 transaction. Quality notification type is Z1 and the tab is "Checklist". Both are custom defined.
The existing text field is of 3 lines. The new text message is of 8 lines. When I did the changes on the custom screen 0106 in the function group XQQM, the changes are not reflected on the QM03 transaction's custom tab. Only first 3 lines were reflecting the change and rest of the 5 lines are not appearing on the screen.
Pointers on this will be definitely helpful.
Regards,
Mallika.

I had a similar problem, but it was with the message line. I found that with Web Forms, I had to issue the Synchronize; a second time, but in Client/Server Forms 6i, the first synchronize worked. Here is the code I used:
<pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy"> SYNCHRONIZE;
if Get_Application_Property(User_Interface) = 'WEB' then
synchronize;--first does not work on web
end if;</font></pre>
Let us know if this works.

Service order component not reflecting in sales order

Dear All,
I have mapped service notification type & service order type now if i create sales order directly from the service notification sales order is not reflecting the componets assigned in service order for that service notification. can anybody help me out?

Sanjay,
This is not standard, although it is possible through development (e.g. via action-box).
However, there is the advance shipment functionality in the service order which does allow you to create a sales order from the service order components...
PeteA

List view web part not reflecting changes made to list view in SharePoint Designer

Dear All,
When adding a list view web part containing a view modified in SharePoint designer (e.g. conditional formatting applied, or group headers modified) I'm finding that the changes made in SPD are not reflected in the web part.
For example, I go into SPD edit a view, and the view appears correctly when I go back into SharePoint, however when I link to the view within a list view web part it results in losing the changes made in SPD.
Becasue it's a publishing page I'm unable to edit the contents of the web part in SPD.
I'm sure this is expected behavior but how do I get around this?
Thnaks,
MDB

Try below
http://stackoverflow.com/questions/19533998/sharepoint-designer-doesnt-show-anything-in-list-and-libraries-link
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/a63a1894-6b1d-420a-95dd-b6c546eab34d/updates-made-to-sharepoint-designer-2010-workflow-do-not-show-up-on-the-server?forum=sharepointcustomizationprevious
http://stackoverflow.com/questions/5959521/sharepoint-designer-saves-the-changes-but-it-does-not-affect
http://social.technet.microsoft.com/Forums/en-US/1e9a8c27-bbc5-4a6f-8daf-4b243182f543/changes-in-sharepoint-designer-2010-not-showing-in-sharepoint-server-2010-page?forum=sharepointadminprevious

Free goods not reflecting in PO from Info Record

Hi,
My requirement is , when ever i order 100 qty from a vendor 10 qty should be delivered free of cost.
I am trying to maintain Info record for the same..
Now when i created PO for the same...I entered 100 qty..it is not reflecting 10 qty in another line in PO..
Where i am wrong?
Uts

HI,
Have maintained the values in
*Spro-Purchasing-Discount in kind-Define & assign discount in kind schema-Maintain free goods schema*
It will be available in standard SAP if not do the following configuration
Here
Usage -N
Application -M
create procedure NR0001
In control data
step-10
Cond Type-NR00
Then save.
Next
Define free good schema
Here assign ur schema grp of vendor
Then assign the procedure created previously (i-e) NR001 & THEN SAVE.
The above configuration is very important for the free goods scenario to work.
Then go to MM and in purchasing view and give the value 2.
Then in MBN1 create the condition record for the IR -0.
Then create the PO it will work definetly.
9884057038
murugan
Edited by: Murugan mgl on Jun 17, 2009 6:58 AM
Edited by: Murugan mgl on Jun 17, 2009 6:59 AM

DataGrid not reflecting changes after INSERT into Table. Delete from Table does.

Wow, it's been a while.
Hope you guys can help.
This is my DataGrid:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
<DataGrid.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="BorderThickness" Value="0"/>
</Style>
</DataGrid.CellStyle>
<DataGrid.Columns>
<DataGridTextColumn x:Name="NodeColumn" Binding="{Binding node}" Header="VS Number" Width="*"/>
<DataGridTextColumn x:Name="SerialColumn" Binding="{Binding serial}" Header="Serial Number" Width="*"/>
<DataGridTextColumn x:Name="NameColumn" Binding="{Binding name}" Header="Asset Name" Width="*"/>
<DataGridTextColumn x:Name="TypeColumn" Binding="{Binding type}" Header="Asset Type" Width="*"/>
<DataGridTextColumn x:Name="_dateColumn" Binding="{Binding date}" Header="Date Allocated" Width="*"/>
<DataGridTextColumn x:Name="PoColumn" Binding="{Binding po}" Header="Purchase Order" Width="*"/>
</DataGrid.Columns>
</DataGrid>
This is where I add a new Row to the Table:
Private Sub Button_Click_1(sender As Object, e As RoutedEventArgs)
Dim cbblocation As ComboBox = Me.FindName("LocationComboBox")
Dim row As DataRowView = DirectCast(cbblocation.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
Dim cbbtype As ComboBox = Me.FindName("comboBoxType")
Dim cbbtext2 As String = cbbtype.Text
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.AddNewAsset(cbbtext, txbSerial.Text, txbName.Text, cbbtext2, Date.Today, txbPO.Text)
node = cbbtext
Dim mp As New MainPage
mp.RefreshGrid(node)
Me.Close()
End Sub
The RefreshGrid method:
Public Sub RefreshGrid(node As String)
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.FillByNode(RETAILISOAMDDataSet.tableAssets, node)
Dim TableAssetsViewSource As System.Windows.Data.CollectionViewSource = CType(Me.FindResource("TableAssetsViewSource"), System.Windows.Data.CollectionViewSource)
Dim be As BindingExpression = BindingOperations.GetBindingExpression(TableAssetsViewSource, CollectionViewSource.SourceProperty)
be.UpdateTarget()
End Sub
And this is what I use to delete a row from the table (and without doing anything special, the DataGrid auto-updates with the changes):
Private Sub Button_Click_4(sender As Object, e As RoutedEventArgs)
If TableAssetsDataGrid.SelectedIndex = -1 Then
MsgBox("You have selected nothing to Delete!", MsgBoxStyle.OkOnly, "Nothing Selected")
Else
Dim dgv As DataGridTextColumn = Me.FindName("NodeColumn")
Dim row As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText As String = row.Item("node")
Dim dgv2 As DataGridTextColumn = Me.FindName("SerialColumn")
Dim row2 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText2 As String = row.Item("serial")
Dim dgv3 As DataGridTextColumn = Me.FindName("NameColumn")
Dim row3 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText3 As String = row.Item("name")
Dim dgv4 As DataGridTextColumn = Me.FindName("TypeColumn")
Dim row4 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText4 As String = row.Item("type")
Dim dgv5 As DataGridTextColumn = Me.FindName("_dateColumn")
Dim row5 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText5 As String = row.Item("date")
Dim dgv6 As DataGridTextColumn = Me.FindName("POColumn")
Dim row6 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText6 As String = row.Item("po")
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.RemoveAsset(dgvText, dgvText2, dgvText3, dgvText4, dgvText5, dgvText6)
Dim cbb As ComboBox = Me.FindName("cbbLocation")
Dim row7 As DataRowView = DirectCast(cbb.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
RefreshGrid(cbbtext)
End If
End Sub
--------- End of Edit
It is bound to a Dataset which gets it's data from a SQL Database.
Loading the Data and Filtering the data based on certain conditions work 100%. The problem I am having is as follows:
I have a form on the Page that takes input and inserts a row into the Database. When this happens, the DataGrid won't automatically reflect the changes (even if I recall the Fill Method of the Dataset). No matter what I do, I have to refresh the entire page
and THEN Fill the Dataset to see any changes.
This is what strikes me as odd...
When I do a delete row operation on the Database (Custom Method on the Dataset with conditions), and just Fill the Dataset again (without doing anything special), the row deletes and the changes is reflected IMMEDIATELY.
What am I doing wrong here? Why would Delete Row reflect the changes on the DataGrid but no Insert Row?
Thanks in Advance.
(P.S. I am very rusty with my developing skills, I haven't done this in YEARS)

>>And what about the the most important question, how exactly is TableAssetsViewSource defined in the XAML markup and what is
its Source property set or bound to? And what about the reproducable sample...?
Here is the Markup of the TableAssetsViewSource:
<Page.Resources>
<local:RETAILISOAMDDataSet x:Key="RETAILISOAMDDataSet"/>
<CollectionViewSource x:Key="TableRegionsViewSource" Source="{Binding tableRegions, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableLocationsViewSource" Source="{Binding tableLocations, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableAssetsViewSource" Source="{Binding tableAssets, Source={StaticResource RETAILISOAMDDataSet}}"/>
</Page.Resources>
The ItemsSource of the DataGrid is bound to the TableAssetsViewSource:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
Just remember, this code was auto-generated with the drag & drop onto the Page, so I did little in terms of setting the actual bindings.
All in all, what I have done so far works as intended, except that when I want to add a row to the table it does not reflect, and that it only shows after refreshing/restarting the application.
I will try and put together a reproducable sample.

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

UI Screen Configs not reflecting on the web

For doing screen configuration, when I click on the frame to configure, the system is picking up std key and not the custom key zpartman though zpartman key is there in the list. ( Note: Zpartman key is the one assigned to this role ). Therefore if I do config in zpartman key, it's not reflecting on the web. Please reply what could be the reason and the solution.
Thanks
TR

Hi TR
first access the standard and check the configuration info such as what is the configuration key , object and subobject .
Then access your custom configuration screen and check what it was looking for and what is it picked , change your custom configuration accordingly what it was looking for (by making changes to configuration key, object and sub object).
Check that you are accessing in the same client if not transport the request to other client using SCC1 transaction.
Thanks & Regards
Raj

ER Contribution for Pension not Reflecting in Payroll.

Hi Experts,
I have an issue in Pension ER contribution in Payroll.
We have created a function to calculate the ER contribution and incorporated in Schema (INT). while running the payroll
ER contribution is not reflecting Payroll.
Note: We are passing the calculated result to WT0902 Pension ER contribution in RT directly by referring structure PC207.
Correct me if this is the rite approach.
Regards
Raj

Hi,
Insted of going through SCHEMA please configure this table in simple way and check whether your client need is getting fullfilled if it is for indian payroll.
V_T7INF1,V_T7INF5,V_T7INF5,V_T7INF3
Go to pa30 and choose infotype 0587 and fill the details and for pension you can either give percentage or the fixed amount and run the payroll
Thanks
Vibin

2LIS_02_ITM deleted line items are not reflected in BW

Hi,
Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
Thanks

Yes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL

PO no not reflecting in GL/ Vendor line item display

Hi Guys,
Please let me know that why PO no (column is displaying but) data not reflecting in GL/ Vendor line item display using TCode FS10N? What may the possible reasons and how I can get the data flow in the column?

Hi Amit,
You are right and I've changed the layout. I've already said that the field displaying there but data is not flowing in the field. I mean to say that PO no is not reflecting in the specified field. However I am able to get the PO no. in Assignment field. What may be the reason and how I get the data (PO no.) in this field?

Recievables amoint is not reflecting in credit exposure value

"FBL5N - Account Receivable Reports-FI-SAP" is showing updated field of "Credit Control Area". But the same items are not reflected in the "Receivables" field of Credit Management Report hence not updating the Credit Exposure. What can be the reason for this?

solved!

Changes in server side java file not reflecting in Client side java code?

Hi friends,
iam using eclipse IDE, JBoss server, SWING GUI and Oracle DB
( looks like : SWINGGUI (Client) <--> EJB's (serverside) <---oracle )
my problem is , when i make change in server side bean file, that changes are not reflecting in GUI programs.
(for ex: iam adding settr and getter for a field and using that in GUI program. but its not identifying that setter or getter).
please tell me what should i do for every change done to server side program, that should reflect / available to GUI?

my problem is , when i make change in server side bean file, that changes are not reflecting in GUI programs.
(for ex: iam adding settr and getter for a field and using that in GUI program. but its not identifying that setter or getter).what do you mean it's not "identifying" the methods?
you have to call those methods you know
are you getting NoSuchMethodError?
please tell me what should i do for every change done to server side program, that should reflect / available to GUI?you haven't posted any code or error messages that might help us debug

Notifications not reflected in EP 7.0 in MSS. ECC 6.0 is Backend

Similar Messages

Maybe you are looking for