Notifications Profile Issue

Hi,
I wounder if someone can help me. I updated my Z10 to 10.3.1.1565, since the time it got updated i am facing some issues. The battery drains very fast and i have a problem with the notifications. The Notification profile changes automatically. If i set the profile to Viberate Only or Silent or any other profile for that matter, it would automatically change to Normal. I have mostly noticed it when i get off call and restart my device. Im sure its something wrong about the new update. 
   Has anyone noticed this issue? Please help me resolve this issue.
Thank You!

Hello,
BB has released 3 updates in the last couple of weeks, so I recommend you update to the very most recent, and do so via AutoLoader. Otherwise, fall back (also via AutoLoader) to the version that was functional for you (and be sure to turn OFF automatic updates).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Notifications Profiles Functinality issue in BlackBerry Z10 OS Version 10.3.1.1565

    Hi,
    Recently, my BB Z10 phone has been upgraded to new OS Version 10.3.1.1565 which has many features.
    I am currently facing one Notification feature issue in this version -
    In the "Notifications",
    if I activate the Profile "Normal" for the first time without restart,
    then it will work fine as per the settings like incoming call sound or media volume sound.
    After this profile, next time, if i change the profile to "Phone Call only",
    then it will not give any sound for incoming calls or media volume sound.
    It will be like "Silent" Mode option.
    And, if I restart the phone, then it will work fine as per the Notification Profile "Phone Call Only"
    Until that, it will not give any sound for Media like music, vedios, or incoming calls after change of Notification Profile.
    This is one of the functionality issue in the Notifications Profiles.
    Please help to suggest anything on this.

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:Article ID: KB36747 All data is deleted following a manual restart of the BlackBerry 10 smartphone and a blue LED is displayed during boot upHopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you. If it does not apply, then the next recommended action is for you to do an OS reload via LINK.
    Good luck and let us know!

  • After updating to Firefox 7.0.1, menu bar for Google,yahoo, Facebook (message,notification,profile,home) and others site are disabled. How can solve this problem?

    after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
    How can I solve this problem?

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • My macbook pro was repaired and since then i can't get nor photoshop or bridge to initialize. a window appears that says it has  initializing problems due to an icc profile issue.

    my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
    there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
    does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanks

    thanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.

  • Colour Profile issues between North America and Europe

    I have a corporate colour, C80M80Y0K0 which creates a very attractive shade of purple. Within North America all printouts demonstrate very similar variations of that purple colour. We have an office in UK that uses the same collateral pieces. While they preview correctly on screen, they are unable to reproduce that purple in their office or with their professional suppliers (all digital processes). The resultant colour is blue (approx C92M68Y18K0).
    The files are created in Indesign, using a process colour within Indesign, and then exported to a PDF and shared with the UK office.
    My guess is that it is a colour profile issue - has anyone else had this same issue, and if it is indeed a colour profile issue, what profile would you recommend using? I've tried using some of the other default profiles within Indesign but with no luck.
    Any assistance would be really appreciated.

    The resultant colour is blue (approx C92M68Y18K0).
    What preset are you using for the Export, or what are the Output settings? Have you tried PDF/X?
    PDF/X-4 will leave color unchanged and profile everything, so a color change like you are describing most likely means the wrong output profile is being used in the UK.
    PDF/X-1a forces everything into your doc's CMYK space and makes conversions at output less likely—with X-1a your 80|80|0|0 mix will probably be output unchanged.

  • Slow Broadband Connection - Likely IP Profile Issu...

     Hello,
    For an age I've had a rubbish broadband connection, but the hassle of call centres and engineer visits have put me off sorting it out.  In August I got frustrated enough to try to get it resolved - I have a couple of work/study things that need a decent internet connection.  After repeatedly trying all the troubleshooting guides and the suchlike, I finally noticed a reference to IP Profiles on the BTW performance test results.
    Further research suggested my practice of turning the Home Hub 3 off when not in use has likely resulted in a fault profile being created, limiting me to 0.25Mbps.  This conclusion was backed up by a relative and a friend who are BT engineers.  I left the Home Hub 3 on for 30 days, but there was no improvement.  I turned the hub on and off to see if it needed to reset itself, but no improvement.  It has now been on for 12 days.  The advice on the forum and from others seems to be that I need BTW to reset my profile as it has become set at the fault level, because I left it too long to sort out. 
    I have now sent an email to BT support, but the initial response suggests they are going to go through every step on the way, despite me laying out all of this.  I keen to know your thoughts on if I'm in the right diagnosis area and whether there's a quicker way to get the IP Profile reset to see if that is the issue?
    Many thanks,
    Gavin
    BTW Performance Test now:
    Download speed achieved during the test was - 0.25 Mbps
     For your connection, the acceptable range of speeds is 0.1 Mbps-0.25 Mbps.
     IP Profile for your line is - 0.25 Mbps
    Upload speed achieved during the test was - 0.8Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 0.83 Mbps
    ASDL Line Status now:
    ADSL Line Status
    Connection Information
    Line state:  Connected
    Connection time:  12 days, 22:13:59
    Downstream:  286.3 Kbps
    Upstream:  1.016 Mbps
    ADSL Settings
    VPI/VCI:  0/38
    Type:  PPPoA
    Modulation:  G.992.5 Annex A
    Latency type:  Interleaved
    Noise margin (Down/Up):  31.5 dB / 6.0 dB
    Line attenuation (Down/Up):  13.1 dB / 8.0 dB
    Output power (Down/Up):  18.1 dBm / 12.7 dBm
    FEC Events (Down/Up):  0 / 8929
    CRC Events (Down/Up):  1 / 13883
    Loss of Framing (Local/Remote):  0 / 0
    Loss of Signal (Local/Remote):  0 / 0
    Loss of Power (Local/Remote):  0 / 0
    HEC Events (Down/Up):  0 / 2794
    Error Seconds (Local/Remote):  1 / 441

    it is not an IP Profile issue as on ADSL2+the profile follows the connection speed automatically your problem is a banded profile caused by a number of hub disconnections /restarts you need to maintain a stable connection 24/7 for the next 3/5 days and then your noise margin will then start drop and your speed start to increase this link explains more http://forumhelp.dyndns.info/speed/speed_drop.html
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
    once you have posted the information asked for then the community members can help you more
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Alert Notification Profile - Period

    Hi Experts,
    We are trying to send email alert notification to Notification Users(User/email id maintained in Notification profile) periodic.
    We maintained Recipient type as Channel, Message channel, Message Profile and set periodic indicator and Start date as current date and Period as :30 (for 30 mins) and set profile as active.
    After this notification settings for the selection has been defined for Alert type 7130 only.
    When the 7130 alert is raised, through some other profile an immediate email notification is send and when I run /SCMB/ANOTPULL program, its again generating, all alerts created for that partiular invoice in a consolidated email.
    I only wanted to display the alert for that Invoice which are valid for that period (Not all history).
    For PO changes, how alert works, because even if i specify 7052, its not getting picked up by /SCMB/ANOTPULL program
    Please give me some reference how this works.. Appreciate your reply... thanks

    Hi Arj Sekar
    In the Alert Notification Profile, there are fileds Minimum Age [hh:mm] and Maximum Age[hh:mm]
    These fields restrict the selection of alerts........
    http://help.sap.com/saphelp_scm70/helpdata/en/0f/893a40243c174ee10000000a1550b0/frameset.htm
    Please go thru the link Exception Mgmt--Alert MonitorAlert Notification--Alert Notification Profile ---Minimum Age and Maximum Age
    The fields Period and start date are basically from when it should start processing and for how long it should access the database to read the alerts
    Regarding  7052 alert, did you define alert notification profile for the same?
    While running the pull report /SCMB/ANOTPULL, does the selection application and alert notification profile are same as wat you defined for alert 7052 and message profile???
    When the 7130 alert is raised, through some other profile an immediate email notification is send!!1
    Check whether any event management profile is active for the same??
    Best Regards
    Vinod

  • Notification Profiles

    I have a new 8330 and have edited each of the notification profiles to my liking.  However, I am only getting vibrations on reciept of messages and calls, even though the profile I have activated clearly indicates tone+vibrate for the type of communication coming in.  This occurs for incoming calls, emails and SMS texts from multiple sources.  Could there be some sort of global selection I have inadvertantly selected?  LDB
    Solved!
    Go to Solution.

    You are very welcome.
    Glad you got it working again.

  • AWE Transaction Configuration Event Notification Setup issue

    AWE Transaction Configuration > Event > Notification Setup issue
    On Final Denial Event has Notifications Option set to "Requester" "Both".
    The Email URL is redirecting to the correct Approval Component mentioned under Approval Component in On Final Denial Event
    But the Worklist URL is redirecting to another Component unlike the email URL, it is sending to a different component.
    Why the same notifications via the same Event (On Final Denial) have two different URL's??

    Hi,
    The worklist/notification component is defined on several places, where the "lowest" definition applies for the action being triggered.
    1 AWE Transaction Configuration> Transaction Registry > Default Approval Component
    2 AWE Transaction Configuration > Event
    3 AWE Transaction Configuration > Event > Notification > Template Detail tab
    Be aware that the Notification section in the Transaction Configuration shows 1 row in the grid, where more than 1 row can be defined. Click on the View all to expand the grid and see all notification defined for this event.
    See if above configurations differ in menu, component, page ...
    Regards,
    Hakan

  • HT204387 BOSE Bluetooth wireless headphones work with iPhone but not iMac - Profile issue I assume - but why not!!!!

    I have a great pair of BOSE wirless headphones that connect faultlessy to my iPhone.  I'm very dissappointed however to find that I cannot use the same headphonse on my iMac or my MacBook Air.  I assume it's a bluetooth profile issue but in product utility terms it makes no sense.  Is anyone aware of a way of circumventing this resytiction (e.g. third-party product, mac setting,...etc)?

    Yes. This has to be the 8.xx iOS.
    I have experienced this since purchasing the 6+. Now, I attempting to pair the phone to Sync in my Ford F150, it
    can't find the phone. I go through any number of attempts: rebooting the phone, finding a bluetooth device on Sync, etc.
    Most of the time it shows a "cannot find bluetooth device". Or the Sync shows a pairing number to type in the phone in order
    to pair, but the iPhone doesn't see Sync, so nothing can be done.
    Sometimes, and I mean only sometime, the device is paired by itself. (On sync, "choose input: usb or bluetooth" and trying this
    several times, Lo and Behold.....wait for it......the iPhone 6+ connects!
    This is not what I had, an iPhone 4S, that one pairing, and always paired. (truck off, crank and instantly paired). The old days!
    I have check Ford to look for an update. I have the latest from 2012. The final one for my truck model year.
    This version of iOS needs works and must be updated again.
    I don't know who to contact at Apple but the mods here don't say how to do that.  It another Apple waiting and see.
    If I find a solution, I will post it immediately. I hope you will post as well. Thanks for reading.
    M.

  • Windows Server 2012 R2 Session Host Server Temp Profile issue.

    HI,
    I successfully Deployed Windows server 2012 r2 Terminal services with High Availability.
    After Rebooting Session Host Server i am facing Temp Profile issue. After i Deleted registry and rebooting server and tried to login again but same popup message you have login with temp profile.
    Any suggestions or any hints would be GREATLY appreciated
    /HR

    how did you delete the profile?
    also are you using UPD disks?
    What errors are shown in the event log if any?
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    My Blog
    LinkedIn:

  • New notification profiles? User defined notificaiton profiles?

    Is there a way to create a new notification profile? In older BB, I could setup a "Loud" profile that was extra loud, but in the OS10, i can't create a new profile at all. Note I am on OS 10.1.

    Not currently.
    If you've been helped click on , if you've been saved buy the app.
    Developer of stokLocker, Sympatico and Super Sentences.

  • Olympus EM5 - profile issue (probably), raw file example provided

    Olympus EM5 - profile issue (probably)
    raw file in question, posted by somebody in dpreview forum = https://dl.dropbox.com/u/50147350/P8261159.ORF

    As evident from your screenshot, those letters are not blown in raw - there are only a few pixels where one of the channels (blue) is reaching saturation. However, that blue color is very saturated and is mostly falling outside output color space (which is usually sRGB or Adobe RGB) or in other words, your monitor isn't able to display that color
    Conversion from raw color space to output color space is done using profiles and can be colorimetric or perceptual. If conversion is colorimetric, colors outside output color space are simply clamped into the range (for instance RGB  -15, -30, 270 --> 0, 0, 255). If conversion is perceptual, colors that would fall outside color space are compressed into it (for instance it could be  -15, -30, 270 --> 10, 5, 253). In first case, colors inside output color space are 'correct', while those outside are wrong - less saturated and possibly with wrong hue. In the second case, colors outside color space are 'less wrong', but colors inside color space are also 'less correct', but overall result is mostly more pleasing to the eye. This compression is performed differently by each manufacturer.
    Each camera model has own set of profiles. Most simple profile is an 3x3 array named color matrix, used for this color conversion - it is embedded in ACR for all supported cameras and can be also written in raw file. It is colorimetric. Then there is Adobe standard profile for all supported cameras in form of dcp file. It is a combination of matrix and lookup table conversion, which is still close to being colorimetric (however, there are several versions). Other profiles that are emulating camera rendering are perceptual (on some cameras there is also one profile said to be colorimetric, for instance Faithful profile in Canon cameras). Unfortunately, there are no camera profiles for Olympus yet, so colorimetric conversion is the only option (ok, another option is using new version of sRGB profile and its perceptual rendering intent, but it is not possible directly in ACR).
    In this particular case, you can improve the look of those letters by moving saturation slider of blue primary (camera calibration tab) from 0 to about -15, which will modify color matrix used for conversion and desaturate whole blue range. Or do the similar thing with slider in HSL tab
    If PV2010 used, some of blown blue color turns violet. It's also a know issue, actually I also reported it several years ago, and is caused by usage of Photo pro color space as intermediate and some clamping of values in ACR workflow. In this case it may be corrected in calibration tab by moving blue hue slider a bit to left, which will change hues of blue range towards cyan.
    Etc. This area is quite complex, I'm familiar only with a small part of it, which I needed for making camera profiles

  • Sound or Notification Profiles

    I've now been an iPhone user since the 3g and overall, am very happy and a big supporter of the iPhone and Apple in general.
    That being said, come on Apple! Give us the basic functionaility that every BB user loved and most WM users grew accustomed to through 3rd party applications; the ability to schedule sound changes based on various schedules or activities.
    This is basic stuff, very basic stuff that has been available on other platforms for years; years!
    I want my VERY smart iPhone to automatically switch to vibrate when it sees I am in a meeting on my calendar. I want it to switch back to my regular sound setting when I am not in my meeting. I want it to recognize I am at home either by GPS or by the SSID on my wifi router and turn off work email notifications and turn down the ringer to half volume. I want it to turn the ringer down as low as possible and turn off all other notifications between 10pm and 5am.
    Iphone developers, I call out to you for assistance. In a moment of weakness today, I almost considered switching back to WM so I could run PA from a little one guy developer in the UK that will remain nameless in hopes you will not remove my post. Please, please, please, give us the ability to have notifcation profiles with scheduling or event triggers. Please!
    If anyone is aware of a good resolution that does not involve JB my iPhone, please reply.

    Ryanladd,
    You may have been an iphone user since the 3G, but you're clearly unaware of who your audience is on this forum.  We're users.  Just like you.
    Attempting to address Apple directly "That being said, come on Apple!  Give us the basic functionality...." is a waste of your time, of my time, and goes nowhere.  And it makes you come off as a bit foolish.
    Feedback to Apple goes here:  http://www.apple.com/feedback/iphone.html
    Meantime, if you have a technical support issue appropriate for us users here, please don't hesitate to ask.
    Best,
    GDG

  • OS Update 10.2.1.537 "Profile Issues"

    The new OS is awesome!
    However, firstly as I am continually altering my profiles for silent and vibrate. You know in and out of meetings, and the Phone calls icon is crossed out. If I select it, a notification appears and States: I quote, "Your profile setting and app level settings are different'. Now I have tried to set it, but it just aint working.
    So someone please help.
    Secondly, is there a manual for the new OS. This would help
    Solved!
    Go to Solution.

    Use the Help app for good instructions.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Maybe you are looking for