Notified thread,although the method notify()/notifyAll() hasn't been called

Hello,
I know that thread that is waiting for notify signal can got it, although another thread within our app and within written code didn't call the method notify()or notifyAll(). Can somebody link me that "strange occurrence" on sun's site or in documentation? Thank you.

Not sure what you are asking for. The Object.wait docs themselves talk about spurious wakeups.
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Object.html#wait()

Similar Messages

TS3992 my ipad mini is stuck with the message on the screen 'this ipad hasn't been backed up in 5 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi' with OK button. If you click button nothing happens and I can't move an

Ipad mini is stuck with the message 'this ipad hasn't been backed up in 5 weeks....' if you click the OK button nothing happens, cannot get rid of the message and cannot even power off b/c the message is on the screen.
The ipad had not been backed up b/c it kept saying not enough storage available

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

My ipad has the message-This ipad hasn't been backed up in two weeks. Backups happen when this ipad is plugged in, locked, and connected to wi-fi. I press ok and nothing happens. I have it locked, plugged into wall, and conected to wi-fi.

My ipad has the message-This ipad hasn't been backed up in two weeks. Backups happen when this ipad is plugged in, locked, and connected to wi-fi. I press ok and nothing happens. I have it locked, plugged into wall, and conected to wi-fi. How do I get it past ok?

Go to Settings, iCloud, and then Storage and Backup. You will then see a button to backup your iPad. It may be that you have much stuff (i.e. photos, apps) for it to do a full backup but you will be able to tell what the estimated backup should be and what it will consist of so that you can choose to prune down items. If you don't want to backup and get rid of the messages you can just turn backup off from this area as well.

HT4847 My iPad has the message, "iCloud backup - hasn't been backed up in 2 weeks. Back ups happen when the iPad is plugged in and connected to WiFi. The device will not let me click "ok" it is frozen and will not turn off allow access to other functions

My iPad is locked up, the message "iCloud backup hasn't been backed up in 2 weeks, needs to be plugged in, locked and connected to WiFi." It is unresponsive to the "ok" command to move forward with the backup. It is stuck.

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

The SMD Agent 'slcxemw04vu' hasn't been found!

Hi,
We are have problem with SMD agent.
We are executing Setup wizard ( for managed system ) but getting following message
The SMD Agent 'slcxemw04vu' hasn't been found!
Thing is SMD agent is running on host slcxemw04vu but somehow it is not able to detect.
System Install Path: /usr/sap/<Agent SID> :Is this correct Path?
Instance Path:/usr/sap/<Agent SID>/<AgentSID97>Is this correct Path?
Please let me know if you have any information for message'
The SMD Agent 'slcxemw04vu' hasn't been found!
Best Regards,
Tushar
Edited by: TusharC Chavan on Oct 21, 2009 5:44 PM

Hi Rahu,
Now Remark are "
Setup data must be entered for with servers : server0 (running EM Core, Application Server Java) (ITS port number must be provided)"
Now AS Java system will not have ITS . So entered solution manager ITS info.Then I got
"with servers : server0 (running EM Core, Application Server Java)
No setup or configuration steps performed yet"
By the way I can't find Diagnostics Administration --> Diagnostics System --> Self Check. Select your Solution and start a Self Check.Can you please explain it in detail.
Best Regards,
Tushar

The SMD Agent 'Hades' hasn't been found!

Hello,
I started to install and configure Wily Introscope on one of my satellite
system.
I have one problem on some systems with the name of the server. The name of the satellite system is "hades" with lower letter. I installed the SMDagent on this hades system, this was installed successful (please see the [Agent Administration picture|http://img28.imageshack.us/img28/4707/agentadministration.jpg]). My problem is when I start to configure the agent for hades system on Managed Systems running Managed Systems, here I get "The SMD Agent 'Hades' hasn't
been found!".(please see the [picture|http://img831.imageshack.us/img831/1260/setupwizard.jpg]) I think the problem is because the difference of capital
letter for server name "hades". The server name is "hades" (with lower"h"), and this is the name in Agent Administration (please see the difference between ["Hades and hades|http://img15.imageshack.us/img15/4707/agentadministration.jpg]"), but in Setup Wizard the name of the server is "Hades"(upper "H"). Can you help me with this issue, because I am not able to
continue because Agent is not available.
I want to inform you that I ran SMSY_SETUP in to transfer all the SLD information to SMSY and this was successful transferred.
Can you please tell me from where can come this server name with upper "H(ades)" . Only some systems have this problem, I configured another systems and those worked fine (the name of server was correctly (with lower characters).
Best regards,
Florin Radulea

There are two possibities.
1) You specified the SLD option when you installed the agent (I think this requires NW 7 SMD agent > ~14).
- On SM system go to RCA work center, select Agent Administration, then Agent Candidates. As long as you registered the agent in the same SLD as SM uses, it should be visible in the SLD view. You need to associate the agent with this SM and supply connection information - there is a button for this, but you need to fill in a userid and password...
The agent retrieves connection information (eventually) from SLD.
2) You didn't register the agent in SLD or the agent needs special information to connect to managing SM.
On OS level User smdadm (or DAAadm) there is a scripts directory
/usr/sap/SMD/J##/script - SMD 7.0
/usr/sap/DAA/SMDA##/script -- Diagnostic agent 7.1 or 7.2
Run smdsetup.sh (.bat for windows) - no options gives all the possible sub commands.
You need to specify info for "managingconf" sub command.
If you provided wrong SLD connection information you can correct with this script too. (sldconf subcommand)
You can also specify saprouter info...
With supplied (correct) managing connection information, the agent should show up on the Agent Administration page.
Note hostname is managing hostname, servername should be managed hostname.
smdsetup managingconf      hostname:"sapms://<fqn>" port:"<MS httpPort>"
                              [optional user:"<...>" pwd:"<...>" servername:"<...>"]
smdsetup managingconf      hostname:"<fqn>" port:"<p4 port>"
                              [optional user:"<value>" pwd:"<value>" servername:"<value>"]
The first form uses load balancing the second doesn't. The port in the second should be 5##04.
Ckeck logs in work directory for error information (in case of typos, etc). I think there may be a log in SMDAgent directory too.
Ken

The SMD Agent 'server' hasn't been found

I've seen this question posted, but no answer provided. I'm trying to install Wily Introscope on a Java-only (Netweaver 7) system. The SMD software is installed and the agent is running. I can see in the log files that the Wily agent has connected to the management console.
I'm running EHP1 on the Solution Manager server.
When I go to Introscope Agent - Detailed Selection   and select this server this message is displayed "Failed to connect to server: "server" - Please make sure SMD Agent is up and running"
When I attempt to run the Diagnostic Setup Wizard. I get the following message "the SMD Agent "server" hasn't been found"
1.) I've stopped and started the SMD agent on the client serveral times - Does not fix the problem
2.) I've restarted Solution Manager - does not fix problem
Any idea how to trouble shoot this issue?

Thanks for pointing me in the right direction - here are the steps to resolve this issue.
In my case the problem was caused by dual entries in smsy for the server. I had the hostname and a DNS u2013 cname u2013 for the server in smsy. This was confusing Solution Manager.
1. Use SOLMAN_WORKCENTER
2. GoTo      ROOT CAUSE ANALYSIS  COMMON TASKS  ADMINISTRATION  AGENT ADMINISTRATION
    a. Right-click on the server with the problem and select u201CRESET SERVER NAMEu201D
        i. The SMD agent will be disassociated with the server. Restart the SMD agent on the server.
3. Steps to reassign the server name
    a. Use SOLMAN_WORKCENTER
    b. GoTo     ROOT CAUSE ANALYSIS  COMMON TASKS SETUP and CHECK  DIAGNOSTIC SETUP  DIAGNOSTIC SYSTEMS  UPGRADER
        i. Select the UPGRADE NOW button
    c. Once the UPGRADER tasks completes
    d. GoTo     ROOT CAUSE ANALYSIS  COMMON TASKS SETUP and CHECK  DIAGNOSTIC SETUP MANAGED SYSTEMS  SETUP WIZARD
        i. Select the server
        ii. Reassign the SMD agent to this server
           1. The SMD agent will restart with the correct server name

TS3992 so how do you clear the message "This iPad hasn't been backed up . . . "

How do you get this message off the screen "This iPad hasn't been backed up in 5 weeks. Backups happen when this iPad is plugged in, locked, . . . "

Some users have reported that the iPad freezes on this screen. Try resetting:
Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

The SMD Agent 'ServerNWD' hasn't been found!

Hello.
I have a problem with SMD (server sm) server and smd agent (server ServerNWD)
I have running SMD agent on the client (ServerNWD). I can see the alerts of this server in Solman rz20. Everithing fine.
But when I enter to SMD to configure Diagnostic, this told me that "The SMD Agent 'ServerNWD' hasn't been found!".
SMD is the only one service in Solution Manager that can't see the agent on ServerNWD.
What can I do?
Thanks for your help.
Esteban G.

Hello,
I also have this error and I found hte solution in :
1. https://service.sap.com/diagnostics
2. Click on "Wily Introscope 8.0 Installation Guide" under "Installation and Configuration"
3. In this guide - Read page 5 and page 38
Did you add your user in users.xml and authorizations in domains.xml ?
Do not forget that there is a direct link between the SMD Agent and both Wily IS Agent.
When you configure SMD in Diagnostics Setup from SMD, if the SMD Agent in the managed system in not started,
you cannot configure your Wily Host-Level Agent in Introscope Setup, which is a step of the Managed System Configuration
of SOLMAN_SETUP.
Hope it helps you
Best regards
Pascal

The SMD Agent 'HOSTNAME hasn't been found!

Dear,
I have already upgrade the Solution Manager 7.0 EHP1 . I have a problem with my SMD error The SMD Agent 'BASAPI02' hasn't been found!
I want to setup E2E Root Cause Analysis for ERP 6.0 Stack Java system.
So I configured SMSY, I've already installed SMD Agent in managed system successfully also.
When I run the Diagnostics Setup -> Managed System -> Setup WIzard,
in the Setup Parameter Step , it said that " No SMD Agent is currently available (ie not assigned). Please install an agent for BASAPI02 or unassign an existing agent in Agent Administration Why is that so ?
In the Agent Administration ( DIagnostics Administration -> Managed SYstem -> Agent Administration) found that the agent is online.
does anyone know why this happens and how to resolve
Thanks in advance,
Antonio

Hello Antonio
The agent name registration or agent registration on it's own depends on the version of your diagnostics agent.
From diagnostics agent 7.20 and higher if you have installed it using default connection setting in sapinst then you don't need to seperately register the diagnostics agent in the agent candidate management.
Once the agent is known you should see it in the agent administration list. If you don't see the agent in the agent administration list it would mean it is not yet known and you have to go through the agent candidate management first.
The server name assignment is normally done through the managed system setup. After selecting your SAP system to be configured and pushing the setup button you get a screen in which you have to fill in the hostname, user+pass and so on at the left side bar. On the right side you should see one or more lines that represent your SAP system.
You have to expand that line and then select the appropriate agent from the list. After selecting the correct agent from the list your diagnostics agent will get the hostname assignment and you will be prompted to wait and refresh because the agent is then automatically restarted.
Kind regards
Tom

HT4847 my ipad has locked with the note:- this ipad hasn't been backed up in two weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi. How do i get into my ipad again.

my ipad has locked with the note " this ipad hasn't been backed up in two weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi.............I dont have a lock on it but i cant get rid of the above message bow to allow me access to back-up as requested. Any ideas?

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use the device again

TS4036 my ipad is displaying the message 'this ipad hasn't been backed up in 2 weeks. Back ups happen when the ipad is plugged in, locked, and connected to wi-fi. I cannot get rid of this message at all, I've tried plugging in and locking etc but it won'

Hi, my ipad has a pop up message saying 'this ipad hasn't been backed up in the last 2 weeks. Backups happen when this Ipad is plugged in, locked, and connected to wi-fi' I've tried everything from locking and plugging in, tyo trying to shut down but can't for the life of me budge the message, ANY IDEAS???

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

How can I allow a sub-vi to run independent of the main program once it has been called while still sending data to the sub-vi

I have a main program where I call a sub-vi. In this sub-vi, there is a while loop that is used to wait for commands in the sub-vi. While the while loop is running, I cannot continue with normal operation of the main program. I would like get the sub-vi to run independently once it has been called, but not hold up the main program. As well, I need to still be able to send data to the sub-vi

One way is to use VI Server, which has been mentioned by others. This will allow you to start another VI (by name) and run it entirely independently of the calling VI. This is a good way to start various independent VIs from a main menu, for example. None of the VIs thus called need have any connection to the others.
Another way it to have the SubVI in a separate while loop on the calling VI's BD. Then, use a local var to start this sub VI from the main loop. The calling VI sets a local START bit and continues running. The sub VI's while loop watches for this START bit to go true, and then runs the Sub VI. The advantage here is that one can more easily pass arguments to the SubVI when it is started, using local vars, which are preferable to globals. Once the Su
bVI is running, however, you must use a global Stop Bit, set in the calling VI, to stop it when the calling VI exits, or the calling VI will hang up, waiting for the Sub VI to close and exit its while loop.
If you need an example of this, email me. ([email protected]). I can also recommend Gary W. Johnson's excellent book which discusses this. ("LabVIEW Graphical Programming", 2nd Ed).
Note: Where possible, I try to call a subvi from within the main VI, wait till it is done, then continue. It avoids the use of locals & globals, and results in cleaner code, with fewer "race" conditions. However, the main VI stops until the subVI is done, hence one should make the subVI modal.

Restrictions passcode does not wok anymore. If I restore factory settings and do a back up will it restore the old passcode? Hasn't been backed up in a while

The restriction passcode stopped working. I did not forget it. The iPad has not been backed up for a long time. If I back up then restore factory settings then restore backup will it still be restricted with the old passcode?

1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

TS4006 I got a email saying my lost iPhone has been found , but I went and checked and it isn't showing up on the map and it hasn't been 24hrs yet since I received the email! Why is this?

I received a email saying my iPhone has been found and when I went to find it on the map in the app , it wasn't showing up on the map and it was in the 24hr time period , is there a way to locate my iPhone?

Sounds to me like there may be a hardware failure involved. Where exactly did you get the phone? Did you ever have it "unlocked"? If so, by whom? Did you ever jailbreak it?

Notified thread,although the method notify()/notifyAll() hasn't been called

Similar Messages

Maybe you are looking for