Notizen synchronisieren mit Outlook 2013

I want to synchronize IPAD Notizen o Iphone Notizen with Outlook 2013

Ich benutze Outlook 2003 seit Jahren und synchronisiere damit alles perfekt mit meinem iPad 2.
Der Fehler liegt daher bestimmt nicht bei Outlook 2003.
Dies sollte helfen:
http://support.apple.com/kb/HT1296?viewlocale=de_DE
Und auch dies hier. Wichtig: "Zusätzliche Informationen" lesen:
http://support.apple.com/kb/HT1386?viewlocale=de_DE
Auch im Handbuch für den iPad gibt es wertvolle Hinweise auf Seite 17, allerdings in Englisch.
Die deutsche Fassung für iOS 7 wird bald erhältlich sein:
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf#page=17

Similar Messages

Iphone 5 synchronisiert mit outlook 2013 nur in eine Richtung

Hallo Community,
ich nutze ein iphone 5 und einen pc windows 8 mit outlook 2013 jedoch lokal installiert, das heißt meine outlookdaten sind nciht in meinem microsoftkonto hinterlegt. Nun funktioniert die synchronisation mit dem iphone via itunes (usb-kabel) nur noch von outlook zum iphone, andersherum nicht. Davon sind interessanterweise auch nur die Kalenderdaten betroffen. Ich habe schon alle auffindbaren tricks befolgt, sowohl itunes als auch outlook neu installiert, die kalneder komplett gelöscht usw, aber leider keine lösung gefunden.
Falls jemand weiter weiß, wäre ich sehr dankbar.
Simone

Die grundlegende Schritte sind:
Starten Sie ... Reset ... Aus Backup wiederherstellen ... Wiederherstellen als Neu ...
Wenn Sie versuchen, alle diese Schritte und Sie noch Fragen haben ... Dann ein Besuch in einem Apple Store oder AASP (Authorized Apple Service Provider) ist der nächste Schritt ...
Achten Sie darauf, vorher einen Termin zu machen ...

Kann Kalender vom Iphone nicht mit Outlook 2013 synchronisieren

Habe seit ein paar Wochen einen neuen Laptop mit Win 8 und Office 2013. Beim Synchronisieren wurde alles synchronisiert, nur nicht meine Kalendereinträge. Was muss ich tun??

Das wird nicht direkt unterstützt, Übertragung von Daten per Bluetooth nur für Freisprecheinrichtungen und Kopfhörer.
Aber es gibt Apps im AppStore die so etwas können, z.B. VCard Sender oder ähnliche. Einfach "Bluetooth" im Suchfeld eingeben.

Kalender Synchronisation mit Outlook funktioniert nicht mehr

Seit der Installation von Itunes 11.1.0.126 funktioniert die Kalender-Synchronisation mit Outlook 2010 über USB nicht mehr.
Der Synchronisationsprozess mit dem Kalender läuft zwar, aber es werden keine Daten ausgetauscht.
Alle anderen Sychronisationen gehen nach wie vor (Kontake, Notizen).
Kennt jemand von Ihnen das Problem und kann mir eine Lösung anbieten.
Herzlichen Dank
Alexander

Eure Antworten waren schon sehr hilfreich.
Ich hatte die gleichen Probleme mit Windows 8.1 und Outlook 2013 und der Synchronisation des Kalenders über USB über iTunes zum iPhone.
Mehrfach hatte ich erfolglos synchronisiert - einmal über 2 Stunden lang - und trotzdem waren die Daten nicht im iPhone Kalender zu sehen.
Ich habe dann auch die Serientermine wie oben beschrieben bereinigt und konnte dann aber nach einer Synchronisation die Daten noch nicht in meinem iPhone im dortigen Kalender sehen.
Bei mir passierte das Überraschende nachdem ich einfach einen ersten Test-Termin im iPhone Kalender eingegeben hatte.
Plötzlich waren alle Kalenderdaten vom Outlook 2013 Kalender auch im iPhone Kalender zu sehen.
Das gleiche Phänomen wie bei den Fotos. Dort muss auch erst ein Foto gemacht werden. Dann legt Apple automatisch einen Foto-Ordner an und danach kann eine Synchronisation erfolgen.
Klingt alles etwas merkwürdig und auch vielleicht etwas zu einfach als Lösung, aber bei mir brachte es den gewünschten Erfolg und ich habe jetzt die Daten vom Outlook 2013 Kalender sichtbar im iPhone Kalender. Es hat doch noch funktioniert.
Wäre schön, wenn es bei Euch auch funktioniert.
Viele Grüße
Matthias

Die Abgleichung mit outlook funktioniert nicht mehr

Ich benütze Outlook als Kalender etc. auf meinem Notebook. Seit drei vier Wochen kann ich die Termine mit meinem I-Phone und I-Pad über I-Cloud nicht mehr abgleichen. Im Outloo lässt sich das I-Cloud Kalender Fenster nicht mehr aktivieren. Der Terminabgleich I-Phone, I-Pad funktioniert aber.
Ich habe mich bereits einmal ab- und wieder angemeldet. Es funktioniert weiterhin nicht.

Eure Antworten waren schon sehr hilfreich.
Ich hatte die gleichen Probleme mit Windows 8.1 und Outlook 2013 und der Synchronisation des Kalenders über USB über iTunes zum iPhone.
Mehrfach hatte ich erfolglos synchronisiert - einmal über 2 Stunden lang - und trotzdem waren die Daten nicht im iPhone Kalender zu sehen.
Ich habe dann auch die Serientermine wie oben beschrieben bereinigt und konnte dann aber nach einer Synchronisation die Daten noch nicht in meinem iPhone im dortigen Kalender sehen.
Bei mir passierte das Überraschende nachdem ich einfach einen ersten Test-Termin im iPhone Kalender eingegeben hatte.
Plötzlich waren alle Kalenderdaten vom Outlook 2013 Kalender auch im iPhone Kalender zu sehen.
Das gleiche Phänomen wie bei den Fotos. Dort muss auch erst ein Foto gemacht werden. Dann legt Apple automatisch einen Foto-Ordner an und danach kann eine Synchronisation erfolgen.
Klingt alles etwas merkwürdig und auch vielleicht etwas zu einfach als Lösung, aber bei mir brachte es den gewünschten Erfolg und ich habe jetzt die Daten vom Outlook 2013 Kalender sichtbar im iPhone Kalender. Es hat doch noch funktioniert.
Wäre schön, wenn es bei Euch auch funktioniert.
Viele Grüße
Matthias

Synch iPhone Kalender mit Outlook funktioniert nicht

Synch of Outlook Calendar with Iphone 4 worked for several months. Then the triple Outlook 2007 (Windows) - iTunes - iPhone decided to change its behaviour.
For some reason they decided to quit syncing.
I set up iPhone from scratch, reinstalled iTunes. So far no success. meanwhile I believe I can reduce the whole thing to a name problem.
In Outlook it is called Kalender (german), iPhone/iTunes want´s to sync a thing called Calandar. I found no way to set the name right.
Any ideas?
havo2000

Eure Antworten waren schon sehr hilfreich.
Ich hatte die gleichen Probleme mit Windows 8.1 und Outlook 2013 und der Synchronisation des Kalenders über USB über iTunes zum iPhone.
Mehrfach hatte ich erfolglos synchronisiert - einmal über 2 Stunden lang - und trotzdem waren die Daten nicht im iPhone Kalender zu sehen.
Ich habe dann auch die Serientermine wie oben beschrieben bereinigt und konnte dann aber nach einer Synchronisation die Daten noch nicht in meinem iPhone im dortigen Kalender sehen.
Bei mir passierte das Überraschende nachdem ich einfach einen ersten Test-Termin im iPhone Kalender eingegeben hatte.
Plötzlich waren alle Kalenderdaten vom Outlook 2013 Kalender auch im iPhone Kalender zu sehen.
Das gleiche Phänomen wie bei den Fotos. Dort muss auch erst ein Foto gemacht werden. Dann legt Apple automatisch einen Foto-Ordner an und danach kann eine Synchronisation erfolgen.
Klingt alles etwas merkwürdig und auch vielleicht etwas zu einfach als Lösung, aber bei mir brachte es den gewünschten Erfolg und ich habe jetzt die Daten vom Outlook 2013 Kalender sichtbar im iPhone Kalender. Es hat doch noch funktioniert.
Wäre schön, wenn es bei Euch auch funktioniert.
Viele Grüße
Matthias

IPhone5 synchronisiert nicht mit Outlook

Iphone 5 synchronisiert nicht mit Outlook 2003 ( Kontakte, Termine ).
Beim Iphone 4s hat das tadellos funktioniert.
Hat jemand eine Ahnung was zu tun ist

Das Apple-Dokument ist ein guter Ort, um die Fehlersuche zu starten Prozess-> iPhone, iPad, iPod touch: Problembehebungsmaßnahmen für das Synchronisieren von Kontakten und Kalendern per USB unter Windows

Print to PDF is very slow showing "save as" dialog when printing from Outlook 2013

Hello,
I'm having a problem with one of my users. The problem is intermittent. At first when I was looking at the issue, here is what I saw:
In Outlook 2013, I opened an e-mail. I then selected Print, selected the Adobe PDF printer, and hit the print button. There was over a 1 minute delay before the "save as" dialog appeared to ask me where to save the document and what to name it. I did this for several different e-mails with and without attachments and the problem was consistent. I saved the e-mail to a local e-mail file and the problem was the same. This process was over 30 or 40 minutes. I was pulled away for another issue and now the "save as" dialog pops up within seconds. The user is complaining that this happens regularly. I tried a repair, cleared temp files, and was going to try printing from other apps, but then it started temporarily behaving itself, so I can't tell you if the same delay existed in other apps. I didn't see anything obvious in the event viewer logs.
Has anyone else seen this? Anyone have an idea on how to troubleshoot this?
Thanks,
Jeffery Smith

Thank for your help Bill, but changing settings in the distiller did not seem to work. As my application prints directly to the default application without using anything specific to Acrobat, I was hoping there was a simple way forward. A colleague suggested copying registry entries from the account I logged on as to the S-1-5-18 entry, then rebooting. This had no effect as the prompt still comes up.
Aandi, I don't have the Acrobat SDK or any experience of it.
Also I'm not sure where any code/script would sit since the application is stable and so I would rather not change it.
If it amounts to a few lines of javascript sitting outside the application then that would be of interest.

Outlook 2013 - User cannot send email to one person

One of our users got a new computer and is running Outlook 2013. They can send emails with no trouble, except to one of our other users. It always
gets rejected and the sender gets an email telling them the one they tried to send was undeliverable. She's running Windows 8.1.
1. Both the sender and the receiver are using Exchange accounts
2. Both computers are on the same network, but neither are on a domain.
3. Error message: The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: ORD2HUB16.mex05.mlsrvr.com
IMCEAEX-_O=MEX07a_ou=Exchange+20Administrative+20Group+20+28FYDIBOHF23SPDLT+29_cn=Recipients_cn=[REDACTED]@mex05.mlsrvr.com
#550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found ##
Original message headers:
Received: from ORD2MBX01H.mex05.mlsrvr.com ([fe80::11f4:d169:375f:62d2]) by
ORD2HUB16.mex05.mlsrvr.com ([fe80::be30:5bff:feee:c7c4%15]) with mapi id
14.03.0169.001; Tue, 10 Jun 2014 11:47:07 -0500
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: [REDACTED[ <[REDACTED]>
To: "[REDACTED] ([REDACTED])" <[REDACTED]>
Subject: email
Thread-Topic: email
Thread-Index: Ac+Ey3p8UrbavpbVRTiY+U9PepgJ0Q==
Date: Tue, 10 Jun 2014 11:47:06 -0500
Message-ID: <[email protected]com>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator: <[email protected]com>
MIME-Version: 1.0
X-Originating-IP: [23.24.160.6]

Hi,
How does the user fill the "To" field in a new message? If she fill it via auto-complete cache, please try to delete the auto-complete cache entry via clicking the "X" icon and then type the email address in the "To" filed. Send the email and check
if this issue continues.
For more causes and troubleshoot steps about this issue, please refer:
http://technet.microsoft.com/en-us/library/dn479208(v=exchg.150).aspx
Regards,
Steve Fan
TechNet Community Support

Exchange 2013 CU7 - Frequent Outlook 2013 Disconnections and Delays

We currently have the following environment:
Windows 2012 VM on Hyper-V with 24GB of RAM and 4 virtual procs (1 socket)
Cisco UCS, B200 M3 Blades
Exchange 2013 CU7
Exchange 2007 is in our environment, but public folders have been removed and only a few stale, unused accounts exist on it.
Two dual-role CAS/Mailbox servers
Mailbox servers are in a DAG
MAPI/HTTP is our connection protocol
.NET Framework 4.5.2
Clients are Outlook 2013 SP1 on Windows 7 and 8.1
(Currently round robin DNS, but we have a hardware load balancer we've temporarily taken out of the mix to solve this problem)
What we're seeing is frequent disconnections from Exchange, regardless of the CAS server. That is, both CAS servers will disconnect clients, but not at the same time. When we look at the Exchange boxes, we notice that the CPU is 99% - 100% each time the
disconnections occur. When we hunt down the IISWorker process causing the sudden CPU run, we see it comes back to the following app pools:
MSExchangeMAPIFrontEndAppPool
MSExchangeMAPIMailboxAppPool
(We were running RPC/HTTP, but switched to MAPI/HTTP to resolve the problem. We had the same issue with equivalent RPC app pools at the time.)
Eventually, within a minute or two, the CPU load will decrease and the clients connected via that CAS will regain connection. As you can imagine, the pain is felt more frequently by uncached clients--although everyone, regardless of caching, will see
the disconnections.
Basically, the problem sounds exactly as shown in this KB: http://support.microsoft.com/kb/2995145 Unfortunately, we already had .NET 4.5.2 installed, and have changed the environment variable and registry as shown in the article.
We're in contact with Microsoft Support, but thus far they're scratching their heads.
I'm clearing up all small errors to decrease the noise in the application error logs, but the most persistent one is Event ID 106 (MSExchange Common):
"Performance counter updating error. Counter name is Time in Resource per second, category name is MSExchange Activity Context Resources. Optional code: 2. Exception: The exception thrown is : System.InvalidOperationException: Instance 'ad-powershell-defaultdomain'
already exists with a lifetime of Process. It cannot be recreated or reused until it has been removed or until the process using it has exited."
Loading/reloading and recreation of the performance counters does not fix the problem, by Microsoft Support or us. Of course, this error existed before we started having issues; I'd just like to clean it up just in case it's a contributing factor.
Has anyone seen anything similar?

We're using a Barracuda load balancer (641), but we've eliminated that as a source of the problem. The CPU spikes and disconnections happen whether or not the load balancer is in use.
This problem is still ongoing, and we're still working with Microsoft Support. Right now they're focused on our environment, but having combed through it numerous times, there's nothing that stands out. I suspect this is a bug in CU7 (yet I would
readily accept our environment being at fault if it means we can identify and resolve the problem), but that's not the road Support is going down.
We've looked at storage I/O on the VM hosts (disk responses are 10 MS or less), added double the CPUs to each mail server (for a total of 8, each), disabled TCP chimney offload, run numerous Experfwiz log collections, etc... Now
the tech is focused on a particular mailbox database being the culprit because it also takes up more CPU when the MAPI app pools are gunning pretty high. I suspect that it is a symptom and not the problem, but I have no choice but to follow his lead.
What is your environment like? Are you also CU7? And did the problem show itself after a cumulative update was applied?

Drafts folder relocation Outlook 2013 and Gmail IMAP and multiple saves to trash folder

Hi,
I have Office professional 2013 32 bit running on Win 7 64bit. I have an issue that I know has been discussed but I see no resolution.
The drafts are saved on the server not locally and the trash folder fills with multiple copies of the draft, the number of copies appears to relate to the time of editing the draft. I have to go in and delete these copies in Trash after writing an email.
Outlook 2013 does not allow me to remap the drafts folder I click unsubscribe and it says the folder is a special folder and cannot be unsubscribed in Outlook. I use the account on my iPhone and this allows me to unsubscribe from the folder.
Has anyone found a solution or is anyone working on a resolution for this problem?
Best regards,
Clive
Regards, Clive

I am having a similar problem with trash receiving multiple copies of some drafts. In last 20 minutes 19 copies of a draft have been included in trash. It seems to happen when I view a draft --but not solely
Using Outlook 2013 with IMAP GMail on windows 7 on a laptop. It synchs with my IPHONE. Yesterday I called Dell Support. They said it was a virus -- though a thorough scan found one item --it was deleted and problem continues.

In outlook 2013 a folder is getting created automatically & New emails are directly going to this folder

Hi, The scenario is as follows
1. A user has wierd problem where in outlook 2013, a folder named "Junk" is created & all emails are going to that folder
2. This Junk is not the regular "Junk E-Mail" folder & it is different.
3. There is "Inbox" folder as well in the outlook
4. There are no Rules in outlook
5. I am able to delete the "Junk" folder, but again after closing & opening the outlook the folder gets automatically created.
What could be wrong here :(
Manju Gowda

Hi,
Which type of email account are you using? Do you have the email account sync to any mobile device? If so, please check the junk email option on the mobile device. You can also try to disable the sync in the mobile device and then check the issue again.
Please let me know the result.
Also see a similar issue discussed here:
http://social.technet.microsoft.com/Forums/office/en-US/d00cab48-d386-4e84-b4c2-d872d77bd26e/outlook-creates-extra-folder-called-junk-in-mailbox?forum=outlook
Thanks,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

MS Access Freezes and Closes when I save a draft email via Outlook 2013

I have Access 2013 Office 365. When I email a report from access via Outlook 2013 I have problems. Outlook opens fine. If I hit send everything is fine. However if I save the email as a draft Access freezes and then closes after a 10- 15 sec delay.
The email is saved as a draft in Outlook but very annoying to have to reopen my Database .
The message I get is : MS Access has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available
I tried compact and repair but that didn't help. Also tried turned of add ons. That didn't work.
Never had this problem with office 2010. What can I do?
I just discovered the same thing is happening in Excel and Word.

Hi all,
Thanks for visiting our forum and sharing your experience here. It'll be benefited to our communicator.
Have a good time.
Regards,
George Zhao
TechNet Community Support

Outlook 2013 - wrap text group policy applied, not working with or without digital signature

Hello,
I'm adding group policies to apply on our new installations of Windows 8.1 with Office 2013. One of the settings being applied is enforcing plain text emails and wrapping text at a certain number of characters. Policies are being added using the Outlook
2013 admx.
When I check the options inside Outlook 2013 the group policy did apply successfully (File, Options, Mail, scroll down to Message Format) The option to "Automatically wrap text at character:" is set to 132 and not adjustable as it should be.
In the group policy I have it set to wrap at 132 characters, but when I go to a client machine and send a digitally signed email, it wraps at the default 76 characters. This makes for very annoying short blocky emails and multi-line hyperlinks.
If I do not digitally sign the email then the text doesn't wrap at all! (until it meets the end of the window). So under no circumstances is it wrapping at 132 where it's supposed to.
Thanks,
-Nick

Hi,
What is your account type in Outlook? Exchange or others?
Please also let me know the email format that you are sending, Plain Text, HTML or Rich Text Format.
You can try sending the same emails in Outlook Safe Mode:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How do I leverage a custom theme for Outlook 2013?

Microsoft has a problem. They use the term "theme" in Office in 2 different ways: 1) the 3 background colors you can choose of the Office applications and 2) a collection of colors, fonts, and layout that can be customized and defined by the user
for the applications.
I know how to create a theme in PowerPoint and save it as a default for all new presentations. Allegedly you can you this across Office applications but this is where it breaks down (as far as my user experience goes).
I've created a theme in PowerPoint. It has my custom colors. I want to use that same collection in Outlook.
I can apply it on a email by email basis (Options menu for an email), but I want the default email (new or reply) to use that custom theme. I see my theme in the drop down menu under a heading of Custom, but there isn't a way to set it as default
(behavior differs from PowerPoint here).
So I look under the Outlook File menu, then Options and select Mail. You can change stationary, but the custom theme isn't an option there.
Then there is Styles under the Format Text menu when in a new email. There are color options and font options, but again, no way to leverage the work I did in creating the custom theme.
Searching on customizing themes for Outlook only gets me answers on the first use of the word theme, not the latter.
Is there no way to you the theme I created for Outlook 2013?

Its very simple - if you want a product that remains consistent and does not change its layout every few years, that is fully customizable, and will remain being supported by subsequent operating systems, then get an open source product running in an open
source OS. It seems that you can no longer rely on MS to provide consistency, stability, or support for their own products.
When will MS realise that customer familiarity with their products is their intellectual property, like branding, which you would never trash every five years. Imagine that MS wanted to change their name to a new company name, or their Outlook brand to Inlook
- it would never happen. So why is thee trade getup and arrangement changing so often and against what their customers want? Is it to justify thee new products? Maybe with cloud and 365, they will finally be happy and stop mucking about with what works (after
they change everything back to '95 /XP format?).

Notizen synchronisieren mit Outlook 2013

Similar Messages

Maybe you are looking for