NotSerializableException reading file from configuration adapter

Hi!
When I try to access a file with config.getFile() that is stored in VA configuration adapter I get a P4BaseRuntimeException with an underlying NotSerializableException.
This is what I'm doing:
Context ctx = new InitialContext();
ConfigurationRuntimeInterface configInterface = 
     (ConfigurationRuntimeInterface)ctx.lookup("configuration");
cfgContext      = configInterface.getConfigurationContext();
cfgHandler      = cfgContext.getConfigurationHandler();
config     = cfgHandler.openConfiguration(path, ConfigurationHandler.READ_ACCESS);
boolean exists     = config.existsFile(filename);
InputStream is = config.getFile(filename);  // this is where the exception occurs
I've omitted handling for InconsistentReadException in this post, to keep the code short.
The existence check with config.existsFile() returns true, so configuration path and filename seem to be ok. However, config.getFile() throws a NotSerializableException.
So, how can I read a file from configuration adapter? What is my mistake?
Thanks for your help,
Frank

hi frank,
in addition to the above content
u can refer the how to use the  config.getFile()
http://kickjava.com/src/org/apache/commons/configuration/reloading/FileChangedReloadingStrategy.java.htm
let me know u need any further info
bvr

Similar Messages

  • Reading Files from an FTP location based on Timestamp

    Hi,
    I have a requirement of reading files from an FTP location. The files should be read in the order they were saved in the folder. Can someone tell me how to solve this?
    Thanks,
    Ravi

    Hi Arik,
    Thanks for your reply. I tried doing what u said, but it isn't working. My requirement is to List the files in the folder using FTP adapter and get the file name with the least file stamp from the FTP adapter and pass the FileName dynamically to another FTP adapter which reads the file based on the FileName. When i tested after including the property (for listing the files) you mentioned, it is giving the following error (copied from flow trace):
    <messages>
    <input>
    <Invoke_getFileListFTP_FileListing_InputVariable>
    <part name="Empty" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/ftp/APP_SequentialFileTransfer/PRJ_SequentialFileTransfer/WS_GetFileList_FTP"/>
    </part>
    </Invoke_getFileListFTP_FileListing_InputVariable>
    </input>
    <fault>
    <bpelFault>
    <faultType>0</faultType>
    <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
    <part name="summary">
    <summary>Exception occured when binding was invoked. Exception occured
    during invocation of JCA binding: "JCA Binding execute of
    Reference operation 'FileListing' failed due to: Exception
    occured when binding was invoked. Exception occured during
    invocation of JCA binding: "Could not instantiate
    InteractionSpec
    oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec due
    to: Cannot set JCA WSDL Property. Error while setting JCA
    WSDL Property. Property setListSorter is not defined for
    oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec Please
    verify the spelling of the property. ". The invoked JCA
    adapter raised a resource exception. Please examine the above
    error message carefully to determine a resolution. ". The
    invoked JCA adapter raised a resource exception. Please
    examine the above error message carefully to determine a
    resolution.</summary>
    </part>
    <part name="detail">
    <detail>Cannot set JCA WSDL Property. Error while setting JCA WSDL
    Property. Property setListSorter is not defined for
    oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec Please
    verify the spelling of the property.</detail>
    </part>
    <part name="code">
    <code>null</code>
    </part>
    </bindingFault>
    </bpelFault>
    </fault>
    <faultType>
    <message>0</message>
    </faultType>
    </messages>
    Thanks,
    Ravi
    Edited by: Ravi Santosh on Apr 24, 2012 11:02 PM

  • PI sender communication channel not reading files from NFS directory

    Hello,
    I have a sender communication channel configured to read file from NFS directory which is on ECC server. A program in ECC generates the file and puts it on the ECC server in the output directory. PI sender communication channel is supposed to pickup this file and process it. If I give the NFS path as the source directory, I am getting error: Configured source directory '//Server/DIR/OUT' does not exist. I tried putting '
    Server\DIR\OUT' too but same error. Do I have to add the NFS path of ECC into PI as logical path?
    Any suggestions?
    Thanks,
    Sangita

    Hello Sangita,
    Your ECC server is an external system, therefore you need to activate FTP service in that system and use the transport protocol FTP:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
    You can use NFS protocol when you have a local directory in XI server.
    Best Regards,
    .Luis Bernal.

  • Reading file from FTPs

    I have to read from different locations(FTP Servers) if there are any new files I have to transform those to my ftp, If I place a new file in my ftp it has to go to the other ftps.
    Can i achieve this with a single ESB service?
    I believe I can do it using two ESB services.
    Can I read .xls files using FTP adapter and transform them to XML??
    Any suggestions please, it is very urgent
    Thanks
    V Kumar

    Define an ESB service that:
    - read file with FTP adapter in ESB
    - From your services it writes the file to the other FTP location.
    Create the services for all ftp location to want to touch.
    Marc

  • Receive XML file from CIDX adapter and Post to SAP as IDoc using XI

    I have scenario where we will receive the xml file from CIDX adapter. I need to take the xml from CIDX, do the Database Lookup and post it to SAP as IDoc.
    Any technical documentaion or step-by-step process documents can be very helpfull to me, since I am new to XI
    Thanks
    SP

    Lookup in XI is used to call the target data storage system and get data from there to your mapping programme.
    In XI you can do Lookup in Message Mapping, Java Mapping and in XSLT Mapping. Previously Lookup in XI was system dependent. But now what ever the system are i.e. SAP system or non-sap system(Oracle,MS SQL etc) lookup API are same.
    Overview of Lookup
    - Lookups are used to identify/request the data from mapping program.
    - It interrupt the process and looking for data which was stored in target system.
    - It get that data and comeback to process and continue with that data.
    Types of Lookups in XI
    - JDBC Lookup: JDBC lookup is used for accessing data from database (non SAP).
    - RFC Lookup: RFC lookup is used for accessing the SAP Data.
    - SOAP Lookup: SOAP lookup is used for accessing data from Webservice
    Steps to perform Lookup in Mapping
    Import package com.sap.aii.mapping.lookup.*;
    Create connection to the target Database system.
    // Determine communication channel created in ID
    Channel channel = null;
    channel = LookupService.getChannel("DB-SYSTEM-NAME","DB-CHANNEL-NAME");
    // Get system accessor for the channel.
    DataBaseAccessor accessor = null;
    accessor = LookupService.getDataBaseAccessor(channel);
    Build the Query String.
    Getting Result
    // Execute Query and get the values.
    DataBaseResult resultSet = null;
    resultSet = accessor.execute(Query);

  • HOW TO DELETE ADOBE READER FILE FROM ADOBE READER

    HOW TO DELETE ADOBE READER FILE FROM ADOBE READER@ !@

    Your question make no sense. What exactly are you trying to do?

  • Reading file from an external folder.

    Iam tring to read an external file from the C:\ drive. Given below is the code.
    DATA LV_XLS(100) TYPE C.
    DATA LV_CONTENT TYPE XSTRING.
    LV_XLS = 'C:\XML\Report.xls'
    READ DATASET LV_XLS INTO LV_CONTENT.
    But when i execute iam getting an error - FILE NOT FOUND. How do i read file from an external folder. My requirement is to strictly read from an external folder. Please help.
    If this is not possible please advice as to how the file could be moved to the SAP root directory. Iam not able to locate the root.

    hi,
    This is the code to read a excel file from the local system.
    Read data set you are using in your code corresponds to files on application server thats the reason its throwing an error.
    * Parameter variable declaration for browsing the file location       *
    PARAMETERS:
      p_file TYPE ibipparms-path OBLIGATORY.
    data:
    it_text TYPE truxs_t_text_data .
    AT SELECTION-SCREEN  ON VALUE-REQUEST FOR p_file.
      CALL FUNCTION 'F4_FILENAME'
       EXPORTING
         program_name        = syst-cprog
    *   DYNPRO_NUMBER       = SYST-DYNNR
         field_name          = ' '
       IMPORTING
         file_name           = p_file.
    START-OF-SELECTION.
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
    *   I_FIELD_SEPERATOR          =
    *   I_LINE_HEADER              =
          i_tab_raw_data             = it_text
          i_filename                 = p_file
        TABLES
          i_tab_converted_data       = t_cust
      EXCEPTIONS
        conversion_failed          = 1
        OTHERS                     = 2
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    This is to read a text file from local system.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
        filename                      =  'D:\FILEINTERFACE\file.TXT'
    *    FILETYPE                      = 'ASC'
         has_field_separator           = 'X'
    *    HEADER_LENGTH                 = 0
    *    READ_BY_LINE                  = 'X'
    *    DAT_MODE                      = ' '
    *    CODEPAGE                      = ' '
    *    IGNORE_CERR                   = ABAP_TRUE
    *    REPLACEMENT                   = '#'
    *  IMPORTING
    *    FILELENGTH                    =
    *    HEADER                        =
        TABLES
          data_tab                      = t_kna1
    *  EXCEPTIONS
    *    FILE_OPEN_ERROR               = 1
    *    FILE_READ_ERROR               = 2
    *    NO_BATCH                      = 3
    *    GUI_REFUSE_FILETRANSFER       = 4
    *    INVALID_TYPE                  = 5
    *    NO_AUTHORITY                  = 6
    *    UNKNOWN_ERROR                 = 7
    *    BAD_DATA_FORMAT               = 8
    *    HEADER_NOT_ALLOWED            = 9
    *    SEPARATOR_NOT_ALLOWED         = 10
    *    HEADER_TOO_LONG               = 11
    *    UNKNOWN_DP_ERROR              = 12
    *    ACCESS_DENIED                 = 13
    *    DP_OUT_OF_MEMORY              = 14
    *    DISK_FULL                     = 15
    *    DP_TIMEOUT                    = 16
    *    OTHERS                        = 17
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    PS.  In both of the above mentioned function modules make sure that the file structure is similar to the internal tables used.
    Thanks
    Sharath

  • Reading file from a folder : File dir = new File(URL+aFile_to_add);

    Hi,
    Trying to read files from a dir on my site using a JSP and bean. I've tried nearly every option for the filepath I can think of and it doesn't seem to be finding the file...
    Here's the bit:
    String URL = "images\\wedding_photos\\";
    File dir = new File(URL+aFile_to_add);
    String[] files = dir.list();
    It's working locally, but I obviously had to change the path from c://... to the above.
    The full code is listed below in the addWedding Method
    The method removes the .jpg from the file name and then writes the new file name to a database
    Thanks for any insight.
    Regards
    Jim
    public String addWedding(String aFile_to_add)
    String feedback = "unset in scrubWedding";
    try
    String URL = "images\\wedding_photos\\";
    Class.forName("org.gjt.mm.mysql.Driver");
    java.sql.Connection connection = java.sql.DriverManager.getConnection("jdbc:mysql://localhost/rhwedd2_shop?user=**********&password=*******");
    java.sql.Statement statement = connection.createStatement();
    File dir = new File(URL+aFile_to_add);
    String[] files = dir.list();
    if (files == null)
    feedback = "Sorry, couldn't find the file "+aFile_to_add+"...no files have been added.";
    else
    for (int i=0; i<files.length; i++)
    // Get filename of file or directory
    String filename = files;
    String no_extension;
    //convert string array element into a char array
    char [] charsfilename = filename.toCharArray();
    int newlength = charsfilename.length -4;
    no_extension = String.valueOf(charsfilename,0,newlength);
    filesAdded = filesAdded+", "+no_extension;
    // Show the new file names in stack trace without extension
    //System.out.println("String no_extension " + no_extension );
    statement.executeUpdate("INSERT INTO items VALUES ('"+no_extension+"',5,'"+aFile_to_add+"')");
    // write to table with item_id and weddingid
    feedback = "The following files have been added..."+filesAdded;
    if (statement != null )
    statement.close();
    if ( connection != null )
    connection.close();
    catch(Exception e)
    feedback = "Into the catch";
    e.printStackTrace(System.err) ;
    return feedback;
    }//end addWedding

    String URL = "images\\wedding_photos\\";
    File dir = new File(URL+aFile_to_add); ok, ok, I'll answer...
    1) What gives you the impression that the relative directory "images\\..." exists (or, in other words, what makes you think your current directory is the parent of "images"?

  • Open Data Set Error while trying to read file from non SAP server

    Hi all,
    is it possible to read data from non-SAP application Sever?
    I'm using OPEN DATASET p_filin FOR INPUT IN LEGACY TEXT MODE CODE PAGE '1504',
    Where p_filin is other Windows server.Our applicition server is under Unix.Is it a problem?
    I make test to read file from SAP application server and it was ok.So how to call other server?
    Thanks!

    Hi,
    Yes it is possible to read data from a non SAP server through the statement OPEN DATASET.
    The important thing to check is that the SAP Server got enough access to the non SAP server so it can perform a reading/writing process depending on your needs.
    You should contact your network administrator and BASIS to help you check the permissions. This can be pretty tricky, specially if the servers are in different domains.
    Regards,
    Gilberto Li

  • [Urgent] How to read files from different directories?

    I am new to Java Programming, I would like to know how to read files from directories other than the current one? (example as follows)
    ProjectDirectory
    |--MainDirectory
    |--MainProgram.java
    |--SupplementDirectory
    |--SupplementProgram.java
    |--Pictures
    |--Image.gif
    What should I write in the MainProgram.java so that I can use the supplementProgram.java from MainProgram and read the Image.gif file from the MainProgram.java?
    Thanks

    Run through the I/O tutorial here. It should get you up to speed on this sort of thing...

  • Can the aTV read files from an iTunes library on my nas drive without my computer being on

    I have my itunes library on a My Book Live nas drive that contains all of my digital movies and TV shows. I want to be able to watch my movies from the library without a computer running. I understand that Apple has chosen to chain you to the computer and your itunes account through Home Sharing but I can not see why they couldn't allow you to access a nas drive without a computer running because your aTV is tied to your itunes account also so why do they force you to run a computer 24/7 365 in order to access the files you have bought and paid for.
    I have a love/hate for Apple because I love the quality of the products they make but I hate how they make all of the digital files you purchase only accessible through a computer running Home Sharing even though the files are not stored on the computer.
    I have tried several things to get this to work without a computer but no luck. The only way I have found to be able to do this is to Jailbreak your aTV and install 3rd party software (which I don't want to do) that will allow you to by pass the computer and Home Sharing (which is dumber than ****) because that is all I want to do is eliminate the need of a computer running wasting electricity (I thought Apple was supposed to be an enviro friendly company, guess not). I am not trying to steal or give someone else my purchased movies and using the aTV and an internet connection they could still be able to tie your media to your itunes account so I just don't get there thinking, or lack of thinking I should say.
    Is their a way to do this without Jailbreaking or modifying your aTV?
    If not is Apple ever going to wake up and allow there customers to actually USE the media they purchase from them without Home Sharing and a computer running?

    _Skull wrote:
    Can the aTV read files from an iTunes library on my nas drive without my computer being on
    no it can't. you need itunes open and running

  • How to read file from server

    Hi,
    When i try to read file from server,the following message is displayed .
    ORA-29532: Java call terminated by uncaught Java exception: java.security.AccessControlException: the Permission (java.io.FilePermission /tmp read) has not been granted to EWMTRACKTEST. The PL/SQL to grant this is dbms_java.grant_permission( 'EWMTRACKTEST', 'SYS:java.io.FilePermission', ' /tmp', 'read' )
    ORA-06512: at "EWMTRACKTEST.GET_DIRLIST_EWM", line 1
    ORA-06512: at line 1
    thanks and regards
    P Prakash

    it seems obvious, user EWMTRACKTEST doesn`t have access to directory /tmp and the file under that.
    try to give read permission and try again.
    you could use command line like 'chmod' to grant permissions.

  • Dynamically Reading Files From Application Server

    Hi Experts,
    Presently I have to write a program which reads files from the application server dynamically. This program will be scheduled in the background with the frequency of half an hour.
    I am Using the function module
    CALL FUNCTION 'SUBST_GET_FILE_LIST'
    EXPORTING
    DIRNAME = '/usr/sap/xxx/xxx/'
    FILENM = 'DATASET'
    PATTERN = '.txt'
    TABLES
    FILE_LIST = IT_FILELIST
    I am facing problem in specifying the parameter FILENM in the function module,
    As I have to read many files from the apps server. How to assign the parameter of function module so it can take the many files generated in the apps server.
    Thanks in Advance,
    Regards,
    Irfan Hussain

    Hi,
    Instead of the above FM, you can use the following code :
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR po_ifile.
    PERFORM get_current_directory  USING 'PO_IFILE'   po_ifile
                                              rov-home_dir rov-curr_dir.
        PERFORM get_filename-of-server TABLES itab_filename
                                           USING  rov-curr_dir rov-gen_name.
        PERFORM help_values_get_with_table_ext TABLES itab_filename
                                           USING  rov-curr_dir
                                                       po_ifile.
    *&      Form  get_current_directory
          text
         -->P_0023   text
         -->P_PO_IFILE  text
         -->P_ROV_HOME_DIR  text
         -->P_ROV_CURR_DI  text
         -->P_CALL  text
         -->P_FUNCTION  text
         -->P_0029   text
         -->P_IMPORTING  text
         -->P_FILE_NAME  text
         -->P_=  text
         -->P_PO_IFILE  text
      FORM get_current_directory  USING _fieldname
                                        _filename
                                        homedir
                                        currdir.
        IF _fieldname <> space.
          PERFORM dunp_value_read USING _fieldname _filename.
        ENDIF.
        IF _filename = space.
          currdir = homedir.
        ELSE.
          rov-work_dir = _filename.
          rov-fdpos = STRLEN( rov-work_dir ).
          DO.
            IF rov-fdpos = 0.
              EXIT.
            ENDIF.
            rov-fdpos = rov-fdpos - 1.
            ASSIGN rov-work_dir+rov-fdpos(1) TO <rov_p>.
            IF <rov_p> = rov-delchar.
              <rov_p> = space.
              EXIT.
            ELSE.
              <rov_p> = space.
            ENDIF.
          ENDDO.
          currdir = rov-work_dir.
        ENDIF.
      ENDFORM.                    " get_current_directory
    *&      Form  get_filename-of-server
          text
         -->P_ITAB_FILENAME  text
         -->P_ROV_CURR_DIR  text
         -->P_ROV_GEN_NAME  text
      FORM get_filename-of-server TABLES nametab STRUCTURE itabfilename
                                  USING  _dirname _genname.
        CALL 'C_DIR_READ_FINISH'             " just to be sure
                               ID 'ERRNO'  FIELD rov-errno
                               ID 'ERRMSG' FIELD rov-errmsg.
        CALL 'C_DIR_READ_START' ID 'DIR'    FIELD _dirname
                                ID 'FILE'   FIELD _genname
                                ID 'ERRNO'  FIELD rov-errno
                                ID 'ERRMSG' FIELD rov-errmsg.
        IF sy-subrc <> 0.
          EXIT.
        ENDIF.
        REFRESH _nametab.
        DO.
          CLEAR _nametab.
          CALL 'C_DIR_READ_NEXT'  ID 'TYPE'   FIELD _nametab-type
                                  ID 'NAME'   FIELD _nametab-name
                                  ID 'LEN'    FIELD _nametab-len
                                  ID 'OWNER'  FIELD _nametab-owner
                                  ID 'MTIME'  FIELD _nametab-mtime
                                  ID 'MODE'   FIELD _nametab-mode
                                  ID 'ERRNO'  FIELD _nametab-errno
                                  ID 'ERRMSG' FIELD _nametab-errmsg.
          _nametab-dirname = _dirname.
          MOVE sy-subrc TO _nametab-subrc.
          CASE sy-subrc.
            WHEN 0.
              IF _nametab-name+0(1) = '.'.
              ELSE.
                APPEND _nametab.
              ENDIF.
            WHEN 1.
              EXIT.
            WHEN OTHERS.                     " SY-SUBRC >= 2
              EXIT.
          ENDCASE.
        ENDDO.
        CALL 'C_DIR_READ_FINISH'             " just to be sure
                               ID 'ERRNO'  FIELD rov-errno
                               ID 'ERRMSG' FIELD rov-errmsg.
      ENDFORM.                    " get_filename-of-server
    *&      Form  help_values_get_with_table_ext
          text
         -->P_ITAB_FILENAME  text
         -->P_ROV_CURR_DIR  text
         -->P_PO_IFILE  text
      FORM help_values_get_with_table_ext  TABLES _filename
                                                 STRUCTURE itab_filename
                                          USING  _currdir
                                                _selfile.
        TYPES: BEGIN OF f4typ_head_struc,
                 tabname LIKE help_info-tabname,
                 fieldname LIKE help_info-fieldname,
                 head_text LIKE shstruc-keyword,
               END OF f4typ_head_struc.
       DATA itab_fields    LIKE TABLE OF help_value        WITH HEADER LINE.
       DATA itab_selvals   LIKE TABLE OF help_vtab         WITH HEADER LINE.
       DATA itab_values    LIKE TABLE OF rlgrap-filename   WITH HEADER LINE.
       DATA itab_header    TYPE TABLE OF f4typ_head_struc  WITH HEADER LINE.
        REFRESH itab_fields.
        REFRESH itab_selvals.
        REFRESH itab_values.
        REFRESH itab_header.
        itab_fields-tabname    = 'PS0192'.
        itab_fields-fieldname  = 'BAA01'.
        itab_fields-selectflag = ' '.
        APPEND itab_fields.
        itab_fields-tabname    = 'RLGRAP'.
        itab_fields-fieldname  = 'FILENAME'.
        itab_fields-selectflag = 'X'.
        APPEND itab_fields.
        LOOP AT _filename.
          itab_values = itab_filename-type.
          APPEND itab_values.
          itab_values = itab_filename-name.
          APPEND itab_values.
        ENDLOOP.
        CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE_EXT'
           EXPORTING
            CUCOL                         = 0
            CUROW                         = 0
            DISPLAY                       = ' '
            FIELDNAME                     = ' '
            TABNAME                       = ' '
            TITLE_IN_VALUES_LIST          = ' '
            SHOW_ALL_VALUES_AT_FIRST_TIME = ' '
            USE_USER_SHRINKING            = ' '
                titel                         = _currdir
            NO_SCROLL                     = ' '
            NO_CONVERSION                 = ' '
            NO_MARKING_OF_CHECKVALUE      = ' '
           IMPORTING
                index                         = rov-index
                select_value                  = rov-selvalue
             TABLES
                  fields                        = itab_fields
                  select_values                 = itab_selvals
                  valuetab                      = itab_values
            HEADING_TABLE                 =
             EXCEPTIONS
                  field_not_in_ddic             = 1
                  more_then_one_selectfield     = 2
                  no_selectfield                = 3
                  OTHERS                        = 4.
        IF sy-subrc = 0.
          CLEAR itab_filename.
          READ TABLE itab_filename INDEX rov-index.
          IF itab_filename-type+0(3) = 'dir'.
            CONCATENATE _currdir rov-delchar rov-selvalue  rov-delchar
                                                          INTO _selfile.
          ELSE.
            CONCATENATE _currdir rov-delchar rov-selvalue INTO _selfile.
          ENDIF.
        ENDIF.
      ENDFORM.                    " help_values_get_with_table_ext
    Best regards,
    Prashant

  • Reading file from AS with details

    Hi guys,
    I want to read files from a directory on AS.
    I used the FM SUBST_GET_FILE_LIST.
    It works fine, but I'd like to know the file creation date.
    I have to use this date time to decide which file I have to manage.
    I thought the MTIME field was the answer, but it returns to me a number that I don't understand.
    Any idea about it, or is there a FM that give to me the file creation date, modification date ecc
    Regards
    Jampierre

    From the description MTIME is the Unix time - "last modification date, seconds since 1970"; Meaning this number is time in seconds from 1970; Did you check out the MOD_DATE and MOD_TIME fields in the same output table?
    There are lot of threads in SDN regarding this and conversion of unix time to std date/time... please search in SDN,
    Convert UNIX timestamp into Date and Time
    Retrieve File creation date

  • How can I save adobe reader file from gmail into my adobe reader app?? i would like to open one file in place where I'm not able to access internet and for that reason i would like to save it. is that even possible?

    How can i save adobe reader file from my gmail into my adobe reader application. or is there any other way i can save it into my phone so I'm able to open in any situation not just from my gmail???

    Long hold on the document in mail and it should give you the open in... option, select adobe reader and the file is now saved locally for viewing even while offline.

Maybe you are looking for

  • Java.io.File and output.write to newly created file

    I'm using output.write(""); in conjunction with java.io.File to create a file with field data from a form submit. The file gets created and includes anything I add between the quotes rather then searching for it's value. My question is what is the sy

  • WebDynpro ABAP Application Guidelines

    Hello All, I need some links to the Webdynpo ABAP Application Guidelines. I found some PDF downloads in SDN saying "Webdynpro ABAP programming Guidelines", but I am not sure, it is more like complete help of WD ABAP. I am looking for more details rel

  • OS X tries to reboot every night

    In the past week I've started keeping my mac on at night to download bit torrent files. For some reason, it reboots itself every night. This is incredibly annoying, and I have my mac secured, so it doesn't automatically log in. I've checked the conso

  • Exporting from Outlook to Mail

    Well...I like many am ready to make the move from anything Microsoft and ready to swith to Mail and the other applications on a mac. I am planning on getting a new iMac with Leopard next week and would like any thoughts on the best way toe export my

  • Stored Procs not migrating to Oracle.

    I am using Oracle 8.1.5 work bench version 2.0.2.0.0. using SQLSERVER plug-in. I am able to successfully capture the source database from SQLSERVER. After creating the Oracle Model the Oracle Model tab is not showing all the user objects (tables, pro