Nouveau and refresh

I'm trying the nouveau driver with a dual-head setup on my GeForce 7800GS. I have an LCD and a CRT. The CRT is using a 60hz refresh, and I'd prefer a 75hz refresh rate.
I try:
xrandr --output VGA-1 -r 75
All that does is make the screen flickr one time and changes nothing.
Here is the full output from xrandr:
Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 4096 x 4096
DVI-I-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
VGA-1 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 356mm x 266mm
1280x1024 85.0 + 75.0 60.0*
1856x1392 60.0
1792x1344 65.0 60.0
1920x1200 59.9
1600x1200 75.0 70.0 65.0 60.0
1680x1050 84.9 74.9 60.0
1400x1050 85.0 74.9 60.0
1440x900 84.8 75.0 59.9
1280x960 85.0 60.0
1360x768 60.0
1280x800 84.9 74.9 59.8
1152x864 75.0
1280x768 84.8 74.9 59.9
1024x768 85.0 75.1 75.0 70.1 60.0 43.5 43.5
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
848x480 60.0
640x480 85.0 75.0 72.8 72.8 66.7 60.0 59.9
720x400 85.0 87.8 70.1
640x400 85.1
640x350 85.1
Here is my xorg.conf:
Section "Monitor"
Identifier "NEC"
EndSection
Section "Monitor"
Identifier "CRT"
Option "RightOf" "NEC"
EndSection
Section "Device"
Identifier "gf7800gs"
Driver "nouveau"
Option "Monitor-DVI-I-1" "NEC"
Option "Monitor-VGA-1" "CRT"
EndSection
Section "Screen"
Identifier "dual_head"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 2560 1024
EndSubSection
Device "gf7800gs"
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "dual_head"
Option "AIGLX" "false"
EndSection
Last edited by reuben (2010-02-27 05:15:33)

I am doing my monthly check of "nouveau" threads in Arch
All arch nouveau users should just come to #nouveau on freenode, more chances to get a question answered there than here.
01:53 < chithead> you may need to specify a resolution too
01:54 < chithead> also for 1.2 it is --rate
You should have 1.3 though, so maybe try to specify a resolution ?
I never tried that myself, the correct refresh rate was always selected automatically.
Maybe kernel and Xorg logs could help too.

Similar Messages

Same EPM Excel Report takes time to open and refresh on 1 system while it opens and refreshes faster on other system

Hi All ,
I am facing an issue where the EPM Excel Templates on SERVER ROOT FOLDER take time to open on 1 system . It also takes great amount of time to REFRESH . While on an another system the same Report opens rather quickly and refreshes also quickly .
Regards,
SHUBHAM

Hi Shubham,
Now day excel problems are due to some MS update. Not sure but have a look at below note.
2107965 - Issues in EPM Add-in after installing Microsoft updates

I am forced to hold shift and refresh the page on 99% of the sites I visit. How do I fix this from happening? If I don't the pages are missing style sheets and etc.

When ever I go to sites they half load or are missing style sheets. If I view the source for the page and click on a style sheet link I get the following error:
Content Encoding Error
The page you are trying to view cannot be shown because it uses an invalid or unsupported form of compression.
If I hold shift and refresh the page loads as normal.
It's happening on 99% of the sites I visit. I have disabled my plugins and add-ons.
I do have some add-ons or plugins that I would like to remove completely but there is no uninstall or remove option, neither in regular or safe mode.

'''I'm NOT buying a backup Computer till, Firefox will Run on Windows 8 !'''

My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is a

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [/forum/1/688252]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is always closed. I need one on one help. Please reply with resolution.
== This happened
==
Every time Firefox opened
== two or three months ago
==
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 (BT-canvas) Firefox/3.6.3 GTB7.0 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdnu
*npdnupdater2
*Coupons, Inc. Coupon Printer DLL
*Coupons, Inc. Coupon Printer Plugin
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*6.0.12.448
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
*Shockwave Flash 10.0 r45
*Yahoo Application State Plugin version 1.0.0.7
*3.0.50106.0
*My Web Search Plugin Stub for 32-bit Windows
*Google Updater pluginhttp://pack.google.com/
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll

* If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear (Firefox 3.6 on Windows) (see [[Menu bar is missing]]).
* Make sure that you have the ''Navigation Toolbar'' and other toolbars visible: View > Toolbars .
* If items are missing then see if you can find them in the View > Toolbars > Customize window.
* If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
* If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
See http://kb.mozillazine.org/Toolbar_customization

Pages slow to load or do not load, then time out, sometimes stopping page from loading will reveal it or stopping and refreshing it, though not always.

pages will not always load or take forever, if i stop it from loading and refresh it it may load right away though not always. It is like the old days @ 33K, never used to happen, basically have all the same plugins have always had.
has been doing this for several months now, finally can't take it any more, all malware, virus, scans are clean, settings are the same for last ? years.
do get script problems from time to time but not very often.
loading say New egg, will take forever or will not completely load page, have backed up all bookmarks, etc: removed and reinstalled but no change.
any Ideas would be of great help. I have been using Firefox, since it's inception and don't want to switch browsers.
Thank You,
Mark

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

I just got the new itunes and I can open itunes and see my music but whenI try and go to the itunes store it just loads to a white page. I try and refresh and go to the home page and nothing happens. I can sign into my account and the tabs for the itunes

I just got the new itunes and I can open itunes and see my music but whenI try and go to the itunes store it just loads to a white page. I try and refresh and go to the home page and nothing happens. I can sign into my account and the tabs for the itunes store pop up like they normally would when browsing the itunes store but when I click on one of them, it is a blank page. Is there a setting I need to change? Does it just take an extremely long time to load? Please help!!

Bucktr09:
I'm having the exact same problem. I upgraded to the newest version of iTunes on my iMac and ever since I did the store is a blank white screen. I can get my library content but the store is a no go. Is there any one out there with a solution?

HT4972 i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........I seem to be

i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........
I seem to be having the same problem on my brand new iPhone 4S. Everything was working fine on the phone until I updated to iOS 5.1.1, but now I no longer receive push notifications for the native Mail app, Instagram, or the Facebook app. I still seem to be receiving SMS texts and iMessages via push, but the aforementioned apps need to be opened before I can receive missed notifications (having them open in the background seems to make no difference).
Thanks for any help that you may provide!

did you try notifications under settings? You can customize it as per your requirement, for each application.
check this out: http://www.gottabemobile.com/2011/10/12/ios-5-how-to-use-notification-center/ or http://reviews.cnet.com/8301-19512_7-20120625-233/ios-5-notifications-a-deeper-l ook/

Looking for suggestions for a new display: What size, resolution and refresh is recommended?

I've been using my laptop display, 15.6" and its just too small. I figured I'd purchase a display to plug into the laptop. I'd like suggestion on specs. I figured a 20 to 23 inch would work ok but I've seen some folks with dual screens. Lastly, I have no understanding of resoution, refresh rates to look for or brands to either look at or stay away from.
Any help would be great.
Thanks.

The good news is that you don't need to worry too much about the specs -- just about any monitor you purchase will be OK. First choose a size that fits in you work area, then pick the monitor from that range of products that has the highest resolution and refresh rates -- the monitors will all have very similar specs.
I've been using PCConnection
http://www.pcconnection.com/
as my primary source for computer purchases for over 12 years and highly recommend it. They have user's comments for most of their products, so you can get a feel for the satisfaction level of the products.
I've never understood the value of having dual monitors, unless one needs to have a couple of real-time monitoring apps open at the same time for instant feedback about the data....
Ken

ALV OO and refreshing the ALV grid

Hi,
i have some problems with my ALV 00 program.
On screen 1 i have to fill in a material number.
For that material i'm getting some data and show in screen 2 in a ALV grid.
Via BACK-button i'm getting back to screen 1 and can fill in another material number.
But the 2nd (and 3rd, etc) time i fill a material, the ALV grid data from material 1 is shown. Even if the internal table I_ALV where the data is, is changed.
What should i do ?
I have initialized the customer container and the grid, but that didn't solved the problem.
regards,
Hans

Hi,
Try clearing and refreshing the alv grid data table in screen 2.
Check with this code. this code is working fine. If we go back and change the input, it is showing the output corresponding to the second input only.
Have you use this method?
 GR_ALVGRID->REFRESH_TABLE_DISPLAY
TYPE-POOLS : SLIS.
* Tables *
TABLES:
VBRK,
VBRP.
* Parameters and select options OR SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
 S_VBELN FOR VBRK-VBELN.
SELECTION-SCREEN END OF BLOCK B1.
* Internal Tables *
* work areas
DATA: BEGIN OF IT_VBRP OCCURS 0,
 VBELN LIKE VBRK-VBELN,
 POSNR LIKE VBRP-POSNR,
 UEPOS LIKE VBRP-UEPOS,
 FKIMG LIKE VBRP-FKIMG,
 NETWR LIKE VBRP-NETWR,
 MEINS LIKE VBRP-MEINS.
DATA : END OF IT_VBRP.
* Variables *
DATA : GR_ALVGRID TYPE REF TO CL_GUI_ALV_GRID,
 GC_CUSTOM_CONTROL_NAME TYPE SCRFNAME VALUE 'CC_ALV',
 GR_CCONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
 GT_FIELDCAT TYPE LVC_T_FCAT,
 GS_LAYOUT TYPE LVC_S_LAYO,
 V_FLAG VALUE 'X'.
* Start of Program *
* INITIALIZATION. *
INITIALIZATION.
S_VBELN-LOW = 1.
S_VBELN-HIGH = 1000000000.
S_VBELN-OPTION = 'EQ'.
S_VBELN-SIGN = 'I'.
APPEND S_VBELN.
* SELECTION-SCREEN *
AT SELECTION-SCREEN.
PERFORM VALIDATION.
* START-OF-SELECTION *
START-OF-SELECTION.
PERFORM GET_DATA.
CALL SCREEN 0100.
* END-OF-SELECTION *
END-OF-SELECTION.
* TOP-OF-PAGE *
TOP-OF-PAGE.
* END-OF-PAGE *
END-OF-PAGE.
* AT USER-COMMAND *
*& Form VALIDATION
* text
* --> p1 text
* <-- p2 text
FORM VALIDATION .
SELECT SINGLE VBELN
FROM VBRK
INTO VBRK-VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
 MESSAGE E000 WITH 'no billing documents found'.
ENDIF.
ENDFORM. " VALIDATION
*& Form GET_DATA
* text
* --> p1 text
* <-- p2 text
FORM GET_DATA .
SELECT VBELN
 POSNR
 UEPOS
 FKIMG
 NETWR
 MEINS
FROM VBRP
INTO TABLE IT_VBRP
WHERE VBELN IN S_VBELN.
ENDFORM. " GET_DATA
*& Module DISPLAY_ALV OUTPUT
* text
MODULE DISPLAY_ALV OUTPUT.
IF V_FLAG = 'X'.
 PERFORM DISPLAY_ALV.
 PERFORM PREPARE_FIELD_CATALOG CHANGING GT_FIELDCAT.
 PERFORM PREPARE_LAYOUT CHANGING GS_LAYOUT.
 CALL METHOD GR_ALVGRID->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME = 'VBRP'
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
 IS_LAYOUT = GS_LAYOUT
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
 CHANGING
 IT_OUTTAB = IT_VBRP[]
 IT_FIELDCATALOG = GT_FIELDCAT
* IT_SORT =
* IT_FILTER =
 EXCEPTIONS
 INVALID_PARAMETER_COMBINATION = 1
 PROGRAM_ERROR = 2
 TOO_MANY_LINES = 3
 OTHERS = 4
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 CALL METHOD GR_ALVGRID->SET_READY_FOR_INPUT
 EXPORTING
 I_READY_FOR_INPUT = 1.
 ELSE.
 CALL METHOD GR_ALVGRID->REFRESH_TABLE_DISPLAY
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
 EXCEPTIONS
 FINISHED = 1
 OTHERS = 2
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 ENDIF.
 CLEAR V_FLAG.
ENDIF.
ENDMODULE. " DISPLAY_ALV OUTPUT
*& Form DISPLAY_ALV
* text
* --> p1 text
* <-- p2 text
FORM DISPLAY_ALV .
IF GR_ALVGRID IS INITIAL.
 CREATE OBJECT GR_ALVGRID
 EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
 I_PARENT = GR_CCONTAINER
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
 EXCEPTIONS
 ERROR_CNTL_CREATE = 1
 ERROR_CNTL_INIT = 2
 ERROR_CNTL_LINK = 3
 ERROR_DP_CREATE = 4
 OTHERS = 5
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDIF.
ENDFORM. " DISPLAY_ALV
*& Form PREPARE_FIELD_CATALOG
* text
* <--P_GT_FIELDCAT text
FORM PREPARE_FIELD_CATALOG CHANGING P_GT_FIELDCAT TYPE LVC_T_FCAT.
DATA : LS_FCAT TYPE LVC_S_FCAT,
 L_POS TYPE I.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'VBELN'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Billing Document'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'POSNR'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Billing Item'.
LS_FCAT-OUTPUTLEN = '6'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'UEPOS'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Higher Level Item'.
LS_FCAT-OUTPUTLEN = '6'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'FKIMG'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Invoice Quantity'.
LS_FCAT-OUTPUTLEN = '13'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'NETWR'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Net Value'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
LS_FCAT-FIELDNAME = 'MEINS'.
LS_FCAT-TABNAME = 'IT_VBRP'.
LS_FCAT-COL_POS = L_POS.
LS_FCAT-SCRTEXT_M = 'Unit of Measure'.
LS_FCAT-OUTPUTLEN = '3'.
APPEND LS_FCAT TO P_GT_FIELDCAT.
CLEAR LS_FCAT.
L_POS = L_POS + 1.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form PREPARE_LAYOUT
* text
* <--P_GS_LAYOUT text
FORM PREPARE_LAYOUT CHANGING P_GS_LAYOUT TYPE LVC_S_LAYO.
P_GS_LAYOUT-ZEBRA = 'X'.
P_GS_LAYOUT-GRID_TITLE = 'INVOICE DETAILS'.
P_GS_LAYOUT-SMALLTITLE = 'X'.
P_GS_LAYOUT-EDIT = 'X'.
ENDFORM. " PREPARE_LAYOUT
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'CANCEL'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
 WHEN 'BACK'.
 LEAVE TO SCREEN 0.
 WHEN 'CANCEL'.
 LEAVE TO SCREEN 0.
 WHEN 'EXIT'.
 CALL TRANSACTION 'SE38'.
 WHEN 'CHANGE'.
 IF GR_ALVGRID->IS_READY_FOR_INPUT( ) = 0.
 CALL METHOD GR_ALVGRID->SET_READY_FOR_INPUT
 EXPORTING
 I_READY_FOR_INPUT = 1.
 ELSE.
 CALL METHOD GR_ALVGRID->SET_READY_FOR_INPUT
 EXPORTING
 I_READY_FOR_INPUT = 0.
 ENDIF.
ENDCASE.
Regards,
Aswin

When I click on a link the address does not display in the location bar in the new tab. Which makes the back/forward button and refresh buttons unable to be used

When opening a link any link from firefox address does not display in the location bar. Even when navigating forward from there the address does not show back/forward button and refresh all rendered unable to be used

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Download and refresh button in Dashboard

Hi,
I have a chart report and table report in the same section of a dashboard. How to have a common Download and Refresh button at the end for both the reports. If I use the report links in both the "reports link" of teh report I get two sets and one is in the middle of the section. If I use the one in the end, it downloads only the second report. Is it possible to do both with one refresh and download, and how can it be done.
Thanks for your time and help.

If the table report and the chart report are completely different, then I don't know how you would do that (except for using the dashboard refresh button and the very bottom left of the dashboard page).
But if they are of the same columns, you can create a pivot table to mimic a regular table and check the "chart pivoted results" to have a chart of that data. Then you will have only one refresh and download for both table and chart.

Blobs and refreshing the schema

Hi all,
I have two questions about Kodo 3.3.3.
1) About blobs. A blob is the serialization fof an object. Does Kodo store
the hashCode of the class (ir the serialVersionUID of the class) that was
used to serialize the object ? Will I have a problem if I want to get back
that blob with a recompiled version of that class, with a different
serialVersionUID ?
2) About the XML descriptors of the schema. I configured my mappingtool to
write the XML descriptor of the my schema in the base, it works very fine.
I can get these descriptor, class by class, with the command mappingtool
-a export -f dump.xml package.jdo, it's very handy. From the
documentation, I red that one can export this XML, edit it, import it back
in the base, and refresh the schema
(http://www.solarmetric.com/jdo/Documentation/3.3.3/docs/ref_guide_mapping_factory.html).
My problem is : I cant find the command to perform this refresh, the
schema is just not "synchronized" with the XML. Any hint ? :)
Btw, I came across a bug using SQL Server : a field named "index"
generated a column named "index", SQL Server was quite angry at that.
Sorry if this one is know already.
Thanks for your answers,
Jos__

1) About blobs. A blob is the serialization fof an object. Does Kodo store
the hashCode of the class (ir the serialVersionUID of the class) that was
used to serialize the object ? Will I have a problem if I want to get back
that blob with a recompiled version of that class, with a different
serialVersionUID ?Kodo just serializes the field value to a byte array using standard Java
serialization. So yes, you will have problems if the serialVersionUID of the
class changes. If you want more control over this process, you can create a
custom DBDictionary that overrides the serialize() method. Or you can use a
field of type byte[] and a byte-array mapping rather than a blob mapping, so
that Kodo doesn't do any serialization.
My problem is : I cant find the command to perform this refresh, the
schema is just not "synchronized" with the XML. Any hint ? :)Use the schema tool to synchronize the schema with the XML. See:
http://www.solarmetric.com/Software/Documentation/latest/docs/ref_guide_schema_schematool.html
Btw, I came across a bug using SQL Server : a field named "index"
generated a column named "index", SQL Server was quite angry at that.
Sorry if this one is know already.Thanks. We'll make sure this is fixed in Kodo 3.3.4.

Are 'Select' and 'Refresh' supposed to be sticky in VM Manager GUI?

VM Manager 2.2 - very nice GUI - pretty intuitive and easy to find your way around. Congrats to the team that added this.
I did notice a couple of things:
The 'Select' radiobutton choices and 'Refresh in:' dropdown choices are not sticky in the VM Manager GUI.
Select a 2nd (anything but first) server and select '30 seconds' for 'refresh' on the Server Pools page (or any other page).
Move to a different page; e.g. 'Servers'
Return to the original page.
The first radio button will be the one selected and not the one the user chose. Also, the 'refresh' setting will have been reset to 'Manually'.
Also the TimeStamp format for the Administration logs is different than the format for the server pool and server logs:
Admin log: 2009.12.14 at 20:52:25 GMT+00:00
Server log: 2009-12-14 12:27:19
Server pool log: 2009-12-11 21:19:53
One possibility for the refresh is to always do a refresh on a page load. Then when you tab to a new page you know you are getting fresh info. Or make the refresh choice sticky and add a '10 second' and '20 second' choice.

rp0428 wrote:
I did notice a couple of things:This forum should not be used as an enhancement request/bug reporting tool. :) You're better off logging an SR with your issues/suggestions: that can at least be assigned to the product management/development teams for review.

WIndow scrolling and refresh issues.

I am having problems with intermittent window scrolling and refreshing. I noticed it first in Safari but I have confirmed it is happening in other applications as well. Typically I have no problems with window scrolling and refreshing. At times however, it becomes sluggish. For instance, I will be reading a web page and attempt to scroll down and the there will be a delay of approximately one or two seconds before the window updates. This occurs whether I am using the keyboard, trackpad or mouse to scroll. There is no video tearing or graphics artifacts, just a delay followed by an updated window. During this time, moving windows also results in a delay of one or two seconds. Again, there is no tearing or artifacts, the window just appears in it's new positioning seconds later. This unfortunately makes the system near unusable as I can not accurately scroll or position. The problem occurs whether or not I have a significant number of applications and the CPU and memory usage is not abnormal. Restarting solves the problem temporarily but it still returns. Oddly, activating show desktop or show all windows via Expose eliminates the problem for some time as well until it returns later. My system is up to date with 10.5.6.
Seems like a problem with WindowServer. Has anyone seen this before or have any suggestions?

Did you ever get an answer to your window scrolling issue. My new PowerMac seems to always have this issue now. (I just moved to the Intel platform from the G4.) Thanks for any help you can give.

HT202856 What resolutions and refresh rates does the MacBook Pro support?

Why does this article provide lots of useful information EXCEPT the piece I want? It does not show what resolutions and refresh rates the MacBook Pro supports over Displayport:
http://support.apple.com/kb/HT6008
I've heard it only supports 4k at 30 Hz. Is this true?

For some reason Displays no longer shows that information, so I don't know what it is. However, the last time I saw the information on a 2009 MBP it was 75.
I'd think there is a utility around that might provide the info like Display Maestro 1.1.7 or SwitchResX.

Nouveau and refresh

Similar Messages

Maybe you are looking for