Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

Hi,
I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
Any clues why this is happening ?
I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
Thanks.

Hi Blaze,
I tried your settings, but no change, the Remote SL is still frozen showing :
"Logic Automap" on the left LCD .
You mention setting "Mixer View 64" well the parameter I see is called :
"Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
Thanks.

Similar Messages

Apple remote is not working with Logic Pro 8

Hi all
Anyone any idea why, it would really help me as I need to remotely activate the record button. Many thanks Dave

My guess: it is simply not compatible with 10.6.8 (which was released well after Logic Pro 8)

HT1619 my remote is not working with the new imac 27" :(

my remote is not working with the new imac 27" i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

<http://store.apple.com/us/product/MC377LL/A/apple-remote>
"Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
<http://www.iospirit.com/products/remotebuddy/>

Apple Remote won't work with Logic

I bought a new iMac (3.06 GHz Intel Core 2 Duo) and the Apple Remote won't work with Logic 8. It worked fine on my MacBook Pro.

jazzmaniac, I did something by holding down two buttons on the remote for a few seconds. I guess that is called registering. But when I try to play a song file in Logic, Front Row pops up instead.
I've searched the Internet and am finding little on this topic.

Apple remote contra not working with Lion

I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
Is there any solution for that?
Thanks

It's not working for me either.
I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
Please somebody help us!

USB superdrive not working with Mac Pro

Is there a trick to getting a USB Superdrive working with a Macpro?
The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
Any pointers in the right direction would be much appreciated.

I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to to "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
Try going to; System Preferences/ CDs & DVDs
Change these two settings to this:
When you insert a blank CD: Ask what to do
When you insert a blank DVD: Ask what to do
NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
And
Then go to Finder Preferences
Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
Try to burn the DVD again (reload Disc- perhaps restart) and try again.
Don't know how these setting changed but they did. It worked for me.
Message was edited by: pj176

Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

Ahmed
Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
Pattie

LP X 10.1 not working with MCU Pro control surface

Since installing LPX 10.1 my MCU Pro (firmware version 4.0.2) no longer works with Logic. Logic is still reporting the existence of a "Logic Control" in the control surfaces list, but doesn't send anything to or receive anything from the controller, and the controller itself remains completely unresponsive.
I've read multiple reports of other MCU Pro owners having the same problem after installing 10.1. Has anyone found a way around this, or do I just have to wait and hope that Apple will address it to restore the functionality of my studio?
(I'm also running Yosemite 10.1 for an OS, BTW.)

Thanks for the link, although I already knew about that thread. The solutions listed therein did not help.
However, I MAY have resolved my problem (although I guess only time will tell for certain). I was running the next-to-latest firmware for the MCU Pro (4.0.2) and assumed that there was unlikely to be anything in the most recent 4.0.3 firmware that would help, since it still predated the release of 10.1. However, I finally went looking for the 4.0.3 firmware this afternoon, and one of the items in the short list of updates was:
"Fixed soft reset bug that could cause the MCU Pro or XT Pro to freeze when being reset by a DAW application."
That sounded exactly like what I was seeing, even though I'd not seen it happen prior to installing LPX 10.1. So I managed to get the MCU Pro firmware updated; Logic could send MIDI to it once the MCU Pro was in an update mode rather than trying to act as a control surface, fortunately. After updating the firmware, selecting for the unit to act as a Logic Control again and then re-adding it to Logic's control surfaces setup, it once again seemed to lock up ... that is, until I then shut down and restarted both it and Logic Pro X. At that point, it started working again (hallelujah!), and has continued to work normally through a couple of shutdown and restart cycles since. So for now I am keeping my fingers crossed, and would recommend to any other MCU Pro owners that, if they aren't already running the latest firmware for their MCU Pro, to try doing that upgrade first before they despair.

External Monitor Not Working With Macbook Pro

My computer was working fine with an external monitor, then my computer froze, and I had to hold down the power button. When I turned it back on, my computer would not work with an external monitor. I've tried different cables, so it's not the cable. The monitor is being detected by the computer, but nothing is showen on the external monitor. When connecting the monitor to the computer, the computer's screen goes blue, then turns back to normal. I
I cannot reset the SMC by removing the battery, I do not have the confidence to remove my battery, and do not have the time to send the computer to someone else to do it.
I also tried updating my OS from 10.7.4 (Might've been 10.7.3) to 10.7.5.
My computer is a MacBook Pro (13-inch, Mid 2010), running OS X 10.7.5 Lion.
I need to get this problem fixed ASAP, any help is appreciated.
Kind Regards,
Sergee237

I forgot to mention, I'm connecting the monitor via MiniDisplay -> HDMI. I've also tried USB -> HDMI and USB -> DVI -> HDMI but none of them seem to work.

External isight not working with Macbook Pro early 2008

My external isight is not working with my Macbook Pro early 2008 (2.4 GHz, Intel Core 2 Duo, 6 GB RAM, OSX Lion). It goes warm when plugged into the firewire port but is not recognized in system prefs (lists as "unknown device" and also does not turn on (green light. I tried resetting PRAM and all the other stuff as suggested here but no luck. It used to work fine on a 1st generation Macbook and I remember that one of the first times I tried it with this machine here it turned on for a few secs (green light) but then it just simply stopped.
Unfortunately, I have no other firewire device to check the port.
Any ideas, dear community?

Our (old) external Firewire iSights can be sensitive to dust, shock, vibration, humidity, and other environmental factors in storage. (I store my spare in its original plastic shipping case with a new desiccant pack on a solid shelf - never in a desk drawer or other container that moves.)
You have tried several good things and may be finding that your old iSight needs work.
Here are the alternatives I can offer. Consider any you have not tried in any order you like:
(1) You can try Apple's suggestions from http://support.apple.com/kb/HT2090
Test in more than one user account and with more than one Apple softwre application.
(2) My expanded suggestions here: http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
(3) Reset Firewire ports using the info from this old archived Apple article: http://web.archive.org/web/20090331211534/http://support.apple.com/kb/HT1317
(4) If you have no local Apple Authorized service Provider who can help you, other service options are here: http://www.apple.com/support/isight/service/
(5) Consider a new USB cam with current warranty such as one of these: http://www.mac-compatible-web-cam.com/
Message was edited by: EZ Jim

My canon EOS DIGITAL ver 24.0 in not working with mac pro os x

MY CANON EOS DIGITAL SOFTWARE VER 24.0 IS NOT WORKING WITH THIS VERSION OF MAC OS X

Atiya wrote:
I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?
I use a 24" LED with my Mac Pro. Works a treat!
Does this help you? http://support.apple.com/kb/TS2400
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Behringer UCA200 not working with Logic

I recently received a Behringer 1222FX mixing board for christmas. It came with a UCA200 which is a little RCA-USB product. I want to use this board with Logic 9 but i can't seem to get it to work. I added a track and selected Input 1 but when i hit record the only sound that was recorded was from the internal computer speakers.
I have already tried the board with Garageband and it worked fine. I was wondering if anyone would steer me in the right direction and help me get this to work with Logic.
Please note that this question maybe simple to answer as I am new to Logic.
Thank You

Chance has it I just tested the UCA-200, and its' quality is very clearly inferior to my ancient Macs' built in 16 bits audio. So don't use it, use the Macs' own built in audio instead. Chances are that the BIA of your Mac is 24 bits (which Mac do you have?), whereas the UCA200 is only 16 bits. That thing is only an improvement if you have an old PC with 8-bits audio. Sorry Uli (Behringer).
regards, Erik.

Melodyne 2.6 not working with Logic 7.1.1

Hi,
those of you who are using Melodyne with Logic and Tiger, does it
work with the Bridge mode ?
I've been trying it now with several different takes and all I get
out of it is sort of a hummingbird like a whistle
or pigs been strangled..take your pick..is it just me ??
It's the 2.6.0.6 Bridge version with Logic 7.1.1 and Tiger 10.4.2.
Thanks

Wll first answering my own question I may have found out the culprit.
After launching my mLan auto connector and looking at MIDI/Audio set up I found that even Logic was working allright with my 01X though it still insisted I was using Internal audio instead of mLan. After changing that, the first and so far only test, I was able to use Melodyne OK.
Otherwise I repeat what others already said here that although Logic lists Melodyne 2.6.0.6 as incompatible it will work.
I guess now that v3 is due out in about a month we'll never see the 2.6. updated to fully work with Logic 7.

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

Garritan, Aria Player not working with Logic Pro X

heading says it all. Spent all day downloading latest Arai PPlayer and Logic will not recognise...
Currently ARIA works with Windows 64 bit, but not yet with Mac 64 bit OS.
There is this in the pdg Manual...
Steve

Sorry, that's the only option I didn't cover in my answer - I should have said: fades only work on unflexed audio regions that are not in take folders.
You can create a comp, export or flatten that and create takes on the exported track/regions, but you can't create fades inside take folders.

Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

Similar Messages

Maybe you are looking for