Novation Remote SL Help

Okay so I used v7 of the installer on Novation's site (so the Novation OS is on 1.015), but the Logic automapping doesn't seem to work right. I read that one thread on it, but nobody seemed to have a clearcut way to get it to work.
Am I supposed to do something else?

I got a SL Remote 25 and it's fine. I downloaded all drivers and templates, and when I scroll through the menu it displays all templates from Logic to Bass station. When I open Logic it recognizes it and switches to automap. Can't get the transport to work though.
In Reason the automapping is amazing. Logic isn't fully operational yet, but Reason is and I can't wait till it works like Reason.
I'd say install every driver available, start with the first one and finally v7. Then try again. Maybe open the free bass station included in Logic and select the mapping for the bass station on the SL. That's how I did it.
From there on, try a few plugins in Logic and use automap to display the parameters on the SL.

Similar Messages

  • Novation ReMote : Please help !

    Hi,
    I´ve just purchased a Remote 61 and I´mn totaly disappointed with this tool. Ok, the keys are great and the knobs looks good, but how can I use it to controll Logic Pro 7.1 ??
    I did all thing which are described in the manual. So I changed the prference files , I loaded the Logic 7 remotLSO, but nothing works.
    It´s nearly uselesse at the moment and I´m really depressed, cause I thought that I am able to controll a lot of AU instruments as well as Logic too.
    I would like to know if somebody here in that forum can show me a way how I can use the Remote with the templates. Or maybe someone has written his own template which works fine ?
    Thank you very much , all help and hints are welcome so much .
    best regards
    udap

    I own a Novation Remote as well and like any MIDI controller, it takes learning how to setup your MIDI controller to work with your DAW. If you read the Novation Manual, download the appropriate template editor, drivers, etc... then you'll be up and running in no time. It took me about 2 days to build all of my templates (for all the synths) and get total control of logic just using the Remote. Just have patience. One thing I've noticed though is the Novation drivers seem to be very buggy in OSX Tiger. I've had continuous crashes with the Remote and my friend just installed the Novation Remote and said Logic has been crashing on him since installing it. So, if you can, run the controller through an Audio interface to avoid potential issues.

  • Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

    Hi,
    I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
    I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
    Any clues why this is happening ?
    I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
    I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
    This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
    The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
    I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
    Thanks.

    Hi Blaze,
    I tried your settings, but no change, the Remote SL is still frozen showing :
    "Logic Automap" on the left LCD .
    You mention setting "Mixer View 64" well the parameter I see is called :
    "Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
    Thanks.

  • Novation remote sl25 toggling screensets

    i am using a novation remote sl25 and suddenly upon pressing a key on the keyboard it starts randomly toggling the screensets and flickering between them and i cant stop it unless i quite logic. can anyone offer some help i'd appreciate it.
    thanks

    Well touch wood all seems to be working. Would you believe turning sl25 off and on sorted out errors . I have new issues though now but they are for another post. I have to say on the whole the set up of this daw has been much easier than my other setups. I live in hope the anxiety will fade soon and I can get down to the business of making music.

  • About Running Remote Search Helps in SRM via Webdynpro ABAP

    Hi there,
    I am having troubles trying to implement an input help for a custom field in the standard Shopping Cart Portal page for item level.
    I would like to implement the same input help used in field Network of Activities, but as I can see in WDA component '/SAPSRM/WDC_UI_DO_ACC', it seems to use another component in order to run a remote Search Help (I assume it is an original search help from PS system).
    Does anybody know how to use this backend search help WDA Component? (/SAPSRM/WDC_UI_BACKEND_SH)
    I haven´t found any information regarding that :S.
    Another option would be to create a new RFC FM in PS returning the expected values, and use these entries to build a list value selector associated to the corresponding context attribute (This is not what I would like...)
    Thanks in advance!

    Vicente Ángel Lopez Romero wrote:
    > Hi there,
    >
    > I am having troubles trying to implement an input help for a custom field in the standard Shopping Cart Portal page for item level.
    >
    > I would like to implement the same input help used in field Network of Activities, but as I can see in WDA component '/SAPSRM/WDC_UI_DO_ACC', it seems to use another component in order to run a remote Search Help (I assume it is an original search help from PS system).
    >
    > Does anybody know how to use this backend search help WDA Component? (/SAPSRM/WDC_UI_BACKEND_SH)
    >
    > I haven´t found any information regarding that :S.
    >
    >
    > Another option would be to create a new RFC FM in PS returning the expected values, and use these entries to build a list value selector associated to the corresponding context attribute (This is not what I would like...)
    >
    > Thanks in advance!
    Figured it out.
    /SAPSRM/WDC_UI_BACKEND_SH is a 'freely programmed' search help used in SRM.
    1. Add this helpview (HV) component usage to your component controller, and view controller.
    2. Map HV SELECTION context to your view
    3. Modify the context attribute you want backend searchhelp to 'freely programmed', and select the component usage created in step above (note this is done dynamically in SAP code, b/c attribute is defined as dictionary search help in SAP components) -- this took a bit to figure out.
    4. IMPORTANT: Give your context attributes the SAME NAME (COST_CTR in my case) as those in structure /SAPSRM/S_CH_WD_MAP_ACC (how obvious was that)
    5. IMPORTANT: Set your LOGSYS in /SAPSRM/CL_PDO_VALHELP_FACTORY class - love those those factories (tic)
    DATA: lo_helper TYPE REF TO /SAPSRM/IF_PDO_ACCT_ASSGT_HLPR,
    CALL METHOD /SAPSRM/CL_PDO_VALHELP_FACTORY=>GET_ACCT_ASSGT_HELPER
    RECEIVING
    RO_ACC_ASSGT_HELPER = lo_helper.
    CALL METHOD lo_helper->set_searchhelp_control
    EXPORTING
    iv_logsys = ls_logsys-logsys.
    6. Now handle event DATA_SELECTED to get data from SELECTION, and move to your Context field.
    How simple was that? Yikes. I should have just built a custom dictionary search help to RFC over and call the BAPI for Cost Center List.
    - Tim

  • Questions about Novation Remote 25SL integration with Logic Pro 8

    Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
    I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
    - Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
    - Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
    - I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
    Thanks in advance for all your feedback.
    Message was edited by: Jason Lixfeld

    Follow-up research:
    Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
    1. disconnect the alphatrack.
    2. launch Logic and then turn on the ReMOTE SL.
    3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
    So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
    As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
    I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

  • Novation ReMOTE 25SL

    Hello forum,
    I'm trying to get a Novation ReMOTE 25SL MIDI controller to work with GarageBand 08. I'm not that concerned about being able to program the pots and sliders. I'd just like to get the keyboard working.
    When I plug in the USB cable for the ReMOTE, GarageBand tells me:
    The number of MIDI inputs has changed.
    Now 3 inputs are available.
    When I play something on the keyboard, nothing happens. However, when I tap the drum trigger pads, I get notes for whatever instrument is selected.
    In the MIDI Devices screen of the Audio MIDI Setup utility, the device shows up as ReMOTE SL. It has 3 pairs of in/out arrows underneath it, as expected. If I select "Test Setup" tapping on a drum trigger will make a "tink" sound and the "in" arrow of the leftmost in/out pair will briefly turn blue. I haven't found what activates the other two "in" arrows. I was hoping one would be for the keyboard keys and the other for the aftertouch function.
    Can someone give me a clue about what I failed to do right or even just failed to do?
    Thanks!

    Contacted Novation Support. They pointed me to a utility called MIDI monitor at www.snoize.com. I used this utility to check every pot, button, pad, slider, and key on the unit. The only things that weren't working were the keys and the octave buttons.
    Novation suggested that the ribbon cable that connects the keyboard to the circuit board may have come loose. I opened the unit up and sure enough, the ribbon cable was not connected to the circuit board. I connected it, closed it up, started up GarageBand and now everything works fine.

  • While updating Apple TV now unit is locked up. Tried resetting with remote no help. Connected to iTunes Apple TV comes up to reset but when you hit reset fails and said it can't find any apple tv

    While updating Apple TV now unit is locked up. Tried resetting with remote no help. Connected to iTunes Apple TV comes up to reset but when you hit reset fails and said it can't find any apple tv

    Dear Brian:
    Create a Play List in iTunes.
    Control-Click and open "Export" in the highlighted Playlist in iTunes.
    With "Export" opened:
    1. Click on "Format" and choose "M3U";
    2. In "Save As" name your "WhatEverNamePlaylist.m3u"; and
    3. In "Where" tell the program where to send your "WhatEverNamePlaylist.m3u".
    You are done creating the Playlist.m3u in iTunes.
    Open "Subsonic Web Page".
    Left hand column open "Import playlist".
    In "Import playlist" click "Choose File" and open the "WhatEverNamePlaylist.m3u"; you created in iTunes.
    The "WhatEverNamePlaylist.m3u" should now occupy the space between "Choose File" and "OK".
    Click "OK".
    The file should now be in the "Playlist" on the left.

  • NOVATION REMOTE ZERO SL and  Apple Final Cut

    Hi all!
    Have you guys tested NOVATION REMOTE ZERO SL with FCP.
    Thank you
    HBars

    If FCP recognized this device at all, it would definitely not support all of the features that the unit offers. In order to work with FCP an audio control surface needs to support either the Mackie Control protocol or Logic Control protocol. And even then the only controls you actually can utilize are the faders for levels, mute and solo buttons, pans, and transport controls. If your device can display timecode, that will show up as well.
    Now if you use Pro Tools or Logic or some other DAW this would be a great control surface and it would be a bonus if it worked with FCP. However, for just using with FCP it would be overkill and most features would remain inactive.
    If you are looking for a cheap control surface consider the Behringer BCF2000. For about $200 it gives you nearly everything that a Mackie MCU gives you.

  • Remote desktop help windows 7

    Hallo
    Im work as a help desk . i use remote desktop help windows 7 but some time i have to wait 10 min to the end user because he is not in his place or ...
    can i use another software without enduser permission? if yes then wich one
    Thanx

    Hi,
    Based on my research and test, it's impossible. Even shortening time is also unreachable.
    Karen Hu
    TechNet Community Support

  • Novation ReMote SL Compact 49

    Hi,
    I'm new to midi controllers but I've been doing some research on the Novation ReMote Sl Compact 49 controller and have the following queries:
    1) Does it work well with Login Pro 8?
    2) Is it a good controller to use with Logic Pro 8?
    3) From my research, there seems to be issues with the Automap Universal 3 software with Logic Pro 8 - is this correct?
    4) Is this controller difficult to use for a complete newbie?
    5) What other controllers would people recommend?
    Thanks.
    Tony.

    The novation compact works well with logic but there is a few issues.
    Like stated above you have to use hui mode to control plug in fx. Its not that stable (with my very limited use). You can control all of logics instruments with a template included in the firmware. The mixer control works well and if you set the controller settings properly it will show you your parameters of your logic instrument on the screen. For some reason every time I reboot logic I have to reset the controller settings though.
    I dont use it as an exclusive controller but for AU plugs ive not had many problems. The UI had some issues but those seemed to be fixed with version 3.
    I was hard pressed to find a better controller for the price. It was between mpk49 and the novation and automap was the selling point for me. Its not without flaws but im happy with it.

  • Multiple USB inputs - Keyboard/Mouse, Novation Remote, and Mackie MUC Pro

    Im running a Macbook Pro, 10.4 with Logic 8. I just got a Mackie Universal Controller Pro and also use a Novation Remote 49. Ive got an additional 20" screen, with the USB inputs as well.
    Im trying to hook up:
    - External keyboard and mouse
    - Mackie Universal Control Pro
    - Novation Remote
    If I plug in the Mackie and the Novation directly to the laptop, everything works. Of course, this then doesnt allow me to plug in the keyboard/mouse as there are only 2 usb ports on the laptop.
    Since Im using the external screen, I have the additional usb inputs on there. So, I plug either the mackie or the novation into one of the usb ports, and then the screen/aux cables into the other. Then I plug the other controller into the screen.
    With this configuration - one of the controllers wont be recognized. I generally get a message about reassigning or not reassigning them as well.
    Regardless of which I choose, the second controller wont come up. Using the midi preferences and controller parameters within Logic doesnt seem to do much either.
    Whats the work around here? If I get a multi USB hub, will this fix it? Im wondering why daisy chaining these pieces doesnt allow the midi to be properly routed or recognized.
    Hopefully this makes sense and someone has the solution! Thanks.

    Hey - Thanks for the quick response.
    'Why don't you leave the controllers connected directly to the computer, and connect your keyboard/mouse to the screen's USB ports?"
    Problem is - there are only two USB ports on the compute. In order for the external displays USB port to work, it has to be plugged in to the computer via USB as well. I have the mouse plugged in to the qwerty keyboard, but they both need to be plugged in to a USB port somewhere regardless.
    Am I missing something?
    It seems like the problem is really trying to plug an external controller in to an apple displays USB port (so that could be a power issue, although the Mackie is self powered, or just general connectivity).
    Based on the above, suggestions?

  • Frontier AlphaTrack and Novation ReMOTE both unusable with Logic Express 8

    After reading all the hype about Logic 8 I went and picked up a copy of Express to see how easy it was to learn -- and indeed, it's MUCH easier than 7 and the interface is absolutely beautiful. It's exactly the way I would have designed it, both in layout and aesthetics.
    However, I'm a bit disappointed that I can't use my brand-new Novation ReMote 25SL with Logic. During the first launch, the Automap server seemed to launch and quit in an endless loop until I force quit it. Logic doesn't seem to properly recognize it either as a controller or as a MIDI keyboard.
    Likewise, my Frontier Alphatrack unit, which is supposed to be supported by Logic 8, doesn't really do anything -- it displays a few random parameters, nothing responds properly.
    I've been using Mackie Tracktion 3 and Reason 4 with these controllers quite successfully. I'm a little frustrated as this means I can't really get started to use Logic without a lot of mousing, and my carpal tunnel tends to protest when I do that.
    One fix I read online involved hacking files in Logic 8 to remove the AlphaTrack support in order to get the Novation keyboard to work -- but I'm not going that far!
    Frontier, for their part, say they have provided all the data to Apple to allow them to implement support -- nearly a year ago actually -- but their feeling is that it got lost in the race to release Leopard and Logic 8. I'm not sure about Novation but they might need to update their software and firmware for Leopard / Logic.
    Is anyone else having the same experience? Any success / frustration / news you'd care to share?
    cheers and thanks in advance --

    Follow-up research:
    Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
    1. disconnect the alphatrack.
    2. launch Logic and then turn on the ReMOTE SL.
    3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
    So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
    As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
    I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

  • DVR/STB/Remote issues - Help Needed

    New to Verizon FIOS (Installed about 2 weeks ago).  Have a few issues. Any help is appreciated
    1) When im on the Home Media DVR and i fast forward through a program, when i stop or hit play, an extremely loud beep that lasts for 1-3 seconds comes from the speakers.  How do i get this to stop, what is causing it, etc?
    2) When i fast forward from one of the STB (regular HD box), if i hit FF once, it fast forwards pretty slow, if i hit it again, it goes somewhat faster.  The problem is.  When i hit it that 2nd time, it seems that 70-80% of the time, it jumps me back to an early portion of the program.  I.E.  Was watching the 2 hour episode of "24", was one hour and 20 min in, got to commercials, i hit FF twice and it jumped me back to 23 minutes in.  Tried again at next commercial break and it jumped me back to 11 minutes in.  What is the deal here?  How do i fix it?
    3) Are there only 2 fast forward speeds on STB?  I came from Brighthouse that had 4 speeds, im a little disappointed with only 2 speeds.  Can anyone verify?
    4) The remotes seem to take 2 seconds or so to register when performing any function other than changing channels.  When i hit FF or REW, DVR or Last, it seems to take a few seconds to kick in.  Is this a known issue, or possibly my box or remotes?
    Thanks for any and all help

    Sorry the ff speeds are the same. On the main MR-DVR there are 3 ff speeds, where the remote STB has 2 ff speeds. I think they did that because how the remote system works, it has slower responses being remote. But with the update you will not need to worry about the ff, because you will not get the hub error. I was one of the first people to get the update and I have not seen the hub error yet.
    As far as a time frame I don't believe there is any thing public about it, I think the only thing they have said is it is going to be rolled out per market, and one market a week. But nothing on the order of the markets.  

  • My Apple TV is showing no signs of reconnecting a remote! Help!

    I cant get my 3rd generation Apple TV to connect to any of my remotes. I've tried restarting it & trying to reconnect the remote or remote app to the Apple TV but the TV shows no signs of a connection. Ive tried all the troubleshooting things for reconnecting the remote & none of them work. The TV still comes on but only if I unplug it & plug it back in. Pleaseeee help me!!

    Welcome to the Apple Community.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Maybe you are looking for