Novedades y Cambios Legales 2013

Bienvenidos a todos,
El objetivo de este hilo (thread) es completar la información entregada por SAP a través de la nota de novedades 167718.
Se continúa así lo iniciado en anteriores años con los hilos del año 2011 y 2012.
Pueden iniciar cualquier pregunta o discusión creando un nuevo hilo, o responder a otras cuestiones planteadas: les animamos a todos a colaborar.
Pueden acceder al New Legal Change Report desde este link.
Información de CLCs para España en este link (corresponde a la nota 1672404).
Un cordial saludo.

Buenas tardes:
Algunos clientes han manifestado no estar de acuerdo con la Base de Cotización mínima diaria calculada con el report RPUDBSE0. En concreto han indicado que para los grupos 8 a 11 dicha base debería tener un importe de 25,09.
El cálculo de la base reguladora mínima diaria para los grupos 8 a 11 se hace en función del Salario mínimo interprofesional diario.
En concreto el cálculo de este año es:
SMI diario = 21.51 se considera el ajuste por la 14 pagas en las que siempre se considera el SMI
21.51 * 14 / 12 = 25.095 -> redondeado 25.10, que es el importe calculado actualmente por el report.
Ahora bien la cifra que está considerando el cliente daría una cifra por
debajo del mínimo de cotización anual fijado en el:
Real Decreto 1717/2012, de 28 de diciembre, por el que se fija el
salario mínimo interprofesional para 2013.
Artículo 3. Compensación y absorción
1. La revisión del salario mínimo interprofesional establecida en este
real decreto no afectará a la estructura ni a la cuantía de los salarios
profesionales que viniesen percibiendo los trabajadores cuando tales
salarios en su conjunto y en cómputo anual fuesen superiores a dicho
salario mínimo.
A tales efectos, el salario mínimo en cómputo anual que se tomará como
término de comparación será el resultado de adicionar al salario mínimo
fijado en el artículo 1 de este real decreto los devengos a que se
refiere el artículo 2, sin que en ningún caso pueda considerarse una
cuantía anual inferior a 9.034,20 euros.
La cifra que calcula el cliente de 25.09 daría un mínimo anual inferior
a los 9034.20 euros
25.09 * 30 * 12 = 9032.40
Por lo tanto no está previsto cambiar este cálculo al menos hasta la
publicación de la ley de cotización y su correspondiente boletín RED.
El cliente puede realizar el ajuste manual de las entradas generadas por
el report si así lo cree conveniente.

Similar Messages

Novedades y Cambios Legales 2014

Bienvenidos a todos,
El objetivo de este hilo (thread) es completar la información entregada por SAP a través de la nota de novedades 167718.
Se continúa así lo iniciado en anteriores años con los hilos del año 2011, 2012 y 2013.
Pueden iniciar cualquier pregunta o discusión creando un nuevo hilo, o responder a otras cuestiones planteadas: les animamos a todos a colaborar.
Información de CLCs para España en este link (corresponde a la nota 1672404).
Pueden acceder al New Legal Change Report desde este link.
Para informaciones generales de todo soporte, pueden seguir nuestro Twitter.
Un cordial saludo.

Buenas tardes:
La nota 2082255 entrega los cambios del ámbito de AFI y TC relacionados con el boletín RED 08/2014.
Como novedad en esta nota se ha utilizado el Upport Downport Overview para los objetos de diccionario DDIC y evitar la creación manual de los mismos.
Podrán ver que la nota tiene como prerequisito la nota 2086001 que es el report que permitirá crear dichos objetos. Este report no debe ser transportado sino que deberán transportar los objetos que genera el report.
Prestén atención a los pasos de implementación descritos en la nota 2082255:
Aplicar la nota 2086001
Ejecutar el report de creación de los objetos de DDIC
Activar los objetos de DDIC
Aplicar la nota 2082255 y pasos manuales pos-implementación
Saludos

Novedades y Cambios Legales 2011

Bienvenidos a todos:
El objetivo de este hilo (thread) es completar la información entregada por SAP a través de la nota de novedades 167718.
Para evitar un manejo ineficiente de este hilo, sugerimos que cualquier pregunta/discusión que se quiera iniciar sobre un tema concreto se haga con la creación de un nuevo hilo.
Les animamos a todos a colaborar.

Buenos días,
Sobre el Real Decreto 1493/2011 (inclusión en el régimen general de personas que participen en programas de formación)
Según el siguiente extracto del Boletín RED 2011/11
Estas modificaciones estarán implementadas en el Sistema RED en el mes de febrero de 2012, por lo que
será a partir de esa fecha cuando las empresas podrán presentar y transmitir las liquidaciones
correspondientes a tales cuentas de cotización a través de dicho Sistema y obtener el Recibo de Liquidación
correspondiente para su pago electrónico o cargo en cuenta. Las liquidaciones que se presenten con
anterioridad a dicha fecha serán rechazadas por el Sistema.
A tales efectos, el Director General aprobará próximamente una Resolución por la cual las empresas podrán
presentar e ingresar en febrero de 2012, sin recargo, las cuotas referidas a los periodos de liquidación de
noviembre y diciembre de 2011
los cambios para la cotización no se podrán reportar hasta febrero de 2012, y entonces también se podrán reportar las liquidaciones de noviembre y diciembre sin recargo para estos casos. Por el momento no hay previsión de la disponibilidad de estos cambios en SAP. Por otro lado se está revisando si es necesaria alguna modificación por parte de SAP para el tema de Afiliación.
Actualización: Sí parece ser que la cotización tiene que estar bien calculada según la nueva normativa a partir del 1 de noviembre y también el tema de Afiliación, aunque no se vaya a poder reportar correctamente por Sistema RED hasta febrero del 2012. Desarrollo está analizando y trabajando en los cambios que pudieran ser necesarios y actualizaremos el hilo con las novedades.
Saludos.
Edited by: Guillermo Ballesteros on Nov 4, 2011 11:40 AM

Novedades y Cambios Legales 2012

Bienvenidos a todos,
El objetivo de este hilo (thread) es completar la información entregada por SAP a través de la nota de novedades 167718.
Se continúa así lo iniciado con el anterior hilo del año 2011.
Pueden iniciar cualquier pregunta o discusión creando un nuevo hilo, o responder a otras cuestiones planteadas: les animamos a todos a colaborar.
Pueden acceder al New Legal Change Report desde este link.
Información de CLCs para España en este link (corresponde a la nota 1672404).
Un cordial saludo.

Buenos días,
A fecha de ayer se ha corregido el report RPUDBSE0 en la ultima versión de la nota 1669941, para evitar que reaparezca el problema descrito en la nota 1595807 con las cuotas de IT e IMS de contratos de formación.
Si ya han ejecutado el report RPUDBSE0 anteriormente, bastará con que sigan los pasos descritos en la nota 1595807, pues los valores no han cambiado del año 2011 al 2012.
Adicionalmente, comentar que está disponible la versión 5 de la nota 1669941: se ha corregido un problema por el que podía llegar a actualizarse erróneamente la constante SIPRE, se adjuntan los valores de la constante para que puedan realizar las comprobaciones necesarias:
01.01.1985     31.12.1997     2.071      ESP
01.01.1998     31.12.1999     2.268      ESP
01.01.2000     31.12.2000     2.356      ESP
01.01.2001     31.12.2001     2.404      ESP
01.01.2002     31.12.2002     14,74      EUR
01.01.2003     30.06.2004     15,04      EUR
01.07.2004     31.12.2004     15,35      EUR
01.01.2005     31.12.2005     15,66      EUR
01.01.2006     31.12.2006     15,97      EUR
01.01.2007     31.12.2007     16,64      EUR
01.01.2008     31.12.2008     17,23      EUR
01.01.2009     31.12.2009     17,57      EUR
01.01.2010     31.12.2010     17,75      EUR
01.01.2011     31.12.9999     17,75      EUR
Saludos.
Edited by: Guillermo Ballesteros on Jan 25, 2012 11:01 AM

Nivel Support Packages

Hola Lucia,
Con respecto a la información publicada En el thread "Novedades y Cambios Legales 2014" respecto al nivel mínimo de Support Packages que se requiere para la aplicación de Cambios Legales 2015.
Indicas que para SAP ECC 6.0 el nivel mínimo es:
SAP_HR ECC 6.0      B0
EA-HR ECC 6.0         B0
¿ Es obligatorio que estén a nivel B0 los dos componentes ?.
O es posible que el nivel de EA-HR ECC 6.0 sea inferior.
Gracias.
Saludos.
Rosa Quirós.

Hola Lucia Iturbe
Tenía entendido que los cambios publicados en Enero requieren un SP no anterior a 18 meses atrás.
En nuestro sistema hemos actualizado al SP75, justo un nivel inferior al que mencionas en tu post.
SAP_HR EnhP6.04 76
EA-HR EnhP 604     76
Puedes confirmar pf que es así y que no habrá problemas para implementar los cambios legales de Enero 2015?
PD: estoy buscando por estos foros... Sabes si hay ya alguna nota/novedad respecto a la publicación en el Boletín Oficial del Estado de la Ley 26/2014 (el pasado 28 de noviembre)
gracias

Nuevos conceptos de nomina nota 1915035

Hola en la nota
Actualización 30 Septiembre: se ha liberado la nota 1915035 con este cambio legal descrito en el Boletín RED 05/2013.
han aparecido 3 nuevos conceptos de nomina
/356 Trab.solidar.jub.parcial
/357 Emp.solidar.jub.parcial
/3CR Horas trab. sin decimales
pero no he logrado encontrar donde se generan dentro de la ESV00 ¿sabe alguien en que situaciones se generan?
Un saludo.
Gustavo.

Estupendo Gustavo.
Bueno por si lo necesitas:
Las CC-nóminas /356 Trab.solidar.jub.parcial y /357 Emp.solidar.jub.parcial se generan en la subrutina calc_solidarity_jp del programa RPCS96E0 (Cálculo de bases cotización y cotizaciones a la Seg.Social). Esta subrutina se llama desde la subrutina “cotizaciones”.
*       Form CALC_SOLIDARITY_JP                                       *
*       Calculation of the special solidarity contribution for         *
*       partially-retired pensioners                                   *
FORM calc_solidarity_jp USING ps_in         TYPE pess0_in
                              ps_out        TYPE pess0_out
                     CHANGING cs_cot        TYPE pess0_cot
                              cv_returncode TYPE pesu0_greturncode.
DATA lv_contrib_company TYPE t5e45-emppc.
DATA lv_contrib_employee TYPE t5e45-trapc.
* Only relevant if the employee is a partially-retired pensioner
IF cl_hrpayes_ss_util=>is_ee_part_retired(
       iv_metod = ps_in-contract_class-metod
       iv_meto2 = ps_in-contract_class-meto2
       iv_meto3 = ps_in-contract_class-meto3
       iv_meto4 = ps_in-contract_class-meto4 ) = abap_false.
    RETURN.
ENDIF.
PERFORM re5e45_n
            USING
              ps_in-contract_class-jpsol-tipo
              ps_in-tpccc
              ps_in-begda
            CHANGING
              lv_contrib_company
              lv_contrib_employee
              cv_returncode.
IF cv_returncode <> 0.
    RETURN.
ENDIF.
cs_cot-ejps = cs_cot-ejps + ps_out-base_cot_cco * lv_contrib_company / 100.
cs_cot-tjps = cs_cot-tjps + ps_out-base_cot_cco * lv_contrib_employee / 100.
ENDFORM.
Corresponde a la base de cotización por el porcentaje de contribución del empleado y de la empresa.
Respecto a la CC-nómina /3CR Horas trab. sin decimales el valor que tiene se genera en la subrutina copy_sv_into_in del include RPC_PAYES_CALC_ESV00.
Saludos,
Antoine

Dynamically assigning aggregation type in a matrix table

I have a matrix table that will produce multiple summary columns. These columns should not all use Sum in the Totals row at the bottom. Some will any of these to be determined at runtime: Sum, Avg, Count, Min, Max. I have a column in the
underlying dataset that will tell me which aggregation type to use and now I need some logic in the summary cell to use the correct aggregation type. I tried different variation of this:
=IIF(Fields!AgType = "Sum",   Sum(Fields!VI_Impact.Value), … next IIF statement….
And here’s the full line
=IIF(Fields!AgType = "Sum",   Sum(Fields!VI_Impact.Value), IIF(Fields!AgType = "Avg",   Avg(Fields!VI_Impact.Value), IIF(Fields!AgType = "Cnt",   Count(Fields!VI_Impact.Value), IIF(Fields!AgType
= "Min",   Min(Fields!VI_Impact.Value), IIF(Fields!AgType = "Max",   Max(Fields!VI_Impact.Value), 0)))))
I also replaced the zero at the end with another sum statement as a default if nothing else is used.
Just to keep it real simple for proof of concept, I used:
=IIF(Fields!AgType = "Sum",   Sum(Fields!VI_Impact.Value), Sum(Fields!VI_Impact.Value))
But the report gets the error:
The Value expression for the textrun ‘VI_Impact.Paragraphs[0].TextRuns[0]’ contains an error: [BC30311] Value of type ‘Microsoft.ReportingServies.ReportProcessing.ReportObjectModel.field’ Cannot be converted to ‘String’
Any idea how I can make this work?

Thanks Jason. I've put an sql script below that will create a test table and populate it with test data. I also attached an rdl file so after you run the script and load the report, all you need to do is update the report's data source
to the correct database and you will see exactly what I'm trying to do.
This report table creates a maxtrix with 4 SUM columns to the right. as you will see in the data, the column headers are named by "VA", and column "AgType" shows how the column should be aggregated. Once you run the report
and look at the data it should be easy to understand.
Thanks for any help you can offer.
DESCRIPTION: Schema Synchronization Script for Object(s) \r\n
tables:
[dbo].[zzzRptValueImpactListing]
AUTHOR: [Insert Author Name]
DATE: 11/19/2014 5:17:57 PM
LEGAL: 2013[Insert Company Name]
SET NOEXEC OFF
SET ANSI_WARNINGS ON
SET XACT_ABORT ON
SET IMPLICIT_TRANSACTIONS OFF
SET ARITHABORT ON
SET NOCOUNT ON
SET QUOTED_IDENTIFIER ON
SET NUMERIC_ROUNDABORT OFF
SET CONCAT_NULL_YIELDS_NULL ON
SET ANSI_NULLS ON
SET ANSI_PADDING ON
GO
USE [VME_KP]
GO
BEGIN TRAN
GO
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
GO
IF @@ERROR<>0 OR @@TRANCOUNT=0 BEGIN IF @@TRANCOUNT>0 ROLLBACK SET NOEXEC ON END
GO
-- Create Table [dbo].[zzzRptValueImpactListing]
Print 'Create Table [dbo].[zzzRptValueImpactListing]'
GO
CREATE TABLE [dbo].[zzzRptValueImpactListing] (
[Id_Number] [int] NULL,
[Id_Name] [nvarchar](4000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[VA] [nvarchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[VI_Impact] [decimal](18, 3) NULL,
[Id_Assignees] [nvarchar](500) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[AgType] [nvarchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Pj_Id] [uniqueidentifier] NOT NULL
GO
IF @@ERROR<>0 OR @@TRANCOUNT=0 BEGIN IF @@TRANCOUNT>0 ROLLBACK SET NOEXEC ON END
GO
ALTER TABLE [dbo].[zzzRptValueImpactListing] SET (LOCK_ESCALATION = TABLE)
GO
IF @@ERROR<>0 OR @@TRANCOUNT=0 BEGIN IF @@TRANCOUNT>0 ROLLBACK SET NOEXEC ON END
GO
IF @@TRANCOUNT>0
COMMIT
SET NOEXEC OFF
DESCRIPTION: Synchronization Script for Object(s)
Tables:
[dbo].[zzzRptValueImpactListing]
AUTHOR: [Insert author name]
DATE: 11/19/2014 5:50:25 PM
LEGAL: 2014 [Insert company name]
SET NOEXEC OFF
SET ANSI_WARNINGS ON
SET XACT_ABORT ON
SET IMPLICIT_TRANSACTIONS OFF
SET ARITHABORT ON
SET NOCOUNT ON
SET QUOTED_IDENTIFIER ON
SET NUMERIC_ROUNDABORT OFF
SET CONCAT_NULL_YIELDS_NULL ON
SET ANSI_NULLS ON
SET ANSI_PADDING ON
GO
BEGIN TRAN
-- =======================================================
-- Synchronization Script for Table: [dbo].[zzzRptValueImpactListing]
-- =======================================================
Print 'Synchronization Script for Table: [dbo].[zzzRptValueImpactListing]'
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (5, N'Change from double tape to liquid glue', N'Prod Cost', CONVERT([decimal](18, 3),-0.050), N'Philipp Bart
Steve Stewart', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (7, N'Position of NTC out of contact area', N'Complexity', CONVERT([decimal](18, 3),-170.000), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (7, N'Position of NTC out of contact area', N'Mrk Conf', CONVERT([decimal](18, 3),8.000), NULL, N'Avg', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (8, N'Change type of patches', N'Mrk Conf', CONVERT([decimal](18, 3),7.000), NULL, N'Avg', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (9, N'Reduce winding turns for harness', N'Mrk Conf', CONVERT([decimal](18, 3),8.000), NULL, N'Avg', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (9, N'Reduce winding turns for harness', N'Relblty', CONVERT([decimal](18, 3),1.500), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (11, N'Use fix sizes of carrier material rolls', N'Prod Cost', CONVERT([decimal](18, 3),-0.310), N'Marc Pauwels', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (11, N'Use fix sizes of carrier material rolls', N'Prod Cost', CONVERT([decimal](18, 3),-0.310), N'Marc Pauwels', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (12, N'Cold pressing process for laying or needle technology', N'Prod Cost', CONVERT([decimal](18, 3),0.080), N'George Padvorac', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (12, N'Cold pressing process for laying or needle technology', N'Relblty', CONVERT([decimal](18, 3),0.500), N'George Padvorac', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (13, N'Liquid cold gluing instead of hot processing', N'Complexity', CONVERT([decimal](18, 3),-100.000), N'Philipp Blattert', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (13, N'Liquid cold gluing instead of hot processing', N'Mrk Conf', CONVERT([decimal](18, 3),8.000), N'Philipp Blattert', N'Avg', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (14, N'Confidential', N'Prod Cost', CONVERT([decimal](18, 3),-0.020), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (16, N'Decrease positioning tolerances to reduce distance between parts', N'Complexity', CONVERT([decimal](18, 3),-40.000), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (16, N'Decrease positioning tolerances to reduce distance between parts', N'Prod Cost', CONVERT([decimal](18, 3),-0.060), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (17, N'Control and reduce amount of thermoactive glue', N'Prod Cost', CONVERT([decimal](18, 3),-0.030), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (18, N'Pull off force harness: reduce spec', N'Complexity', CONVERT([decimal](18, 3),-50.000), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (18, N'Pull off force harness: reduce spec', N'Complexity', CONVERT([decimal](18, 3),-50.000), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (18, N'Pull off force harness: reduce spec', N'Mrk Conf', CONVERT([decimal](18, 3),6.000), NULL, N'Avg', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (18, N'Pull off force harness: reduce spec', N'Mrk Conf', CONVERT([decimal](18, 3),6.000), NULL, N'Avg', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (18, N'Pull off force harness: reduce spec', N'Prod Cost', CONVERT([decimal](18, 3),-0.040), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (18, N'Pull off force harness: reduce spec', N'Prod Cost', CONVERT([decimal](18, 3),-0.040), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (23, N'Simplify and stabilize contact process', N'Mrk Conf', CONVERT([decimal](18, 3),6.000), NULL, N'Avg', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (23, N'Simplify and stabilize contact process', N'Prod Cost', CONVERT([decimal](18, 3),-0.320), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (23, N'Simplify and stabilize contact process', N'Relblty', CONVERT([decimal](18, 3),1.500), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (24, N'Decrease positioning tolerances to reduce distance between parts', N'Prod Cost', CONVERT([decimal](18, 3),-0.210), N'Mark Powel
Philipp Bart', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (25, N'Separate extension of carrier material, than assembly by gluing', N'Complexity', CONVERT([decimal](18, 3),-20.000), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (25, N'Separate extension of carrier material, than assembly by gluing', N'Prod Cost', CONVERT([decimal](18, 3),-0.230), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (26, N'Use higher emission foam/fleece where possible', N'Mrk Conf', CONVERT([decimal](18, 3),7.000), N'Craig Squires
Stacy Johnson', N'Avg', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (27, N'Reduce material variance fleece: width, composites, glue or not,', N'Complexity', CONVERT([decimal](18, 3),-5.000), N'Stacy Johnson', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (28, N'Confidential', N'Relblty', CONVERT([decimal](18, 3),4.000), NULL, N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (29, N'Reduce material variance tape: width, composites', N'Complexity', CONVERT([decimal](18, 3),-3.000), N'Steve Stewart', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (29, N'Reduce material variance tape: width, composites', N'Prod Cost', CONVERT([decimal](18, 3),-0.350), N'Steve Stewart', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
INSERT INTO [dbo].[zzzRptValueImpactListing] ([Id_Number], [Id_Name], [VA], [VI_Impact], [Id_Assignees], [AgType], [Pj_Id]) VALUES (29, N'Reduce material variance tape: width, composites', N'Relblty', CONVERT([decimal](18, 3),3.000), N'Steve Stewart', N'Sum', '47c9efba-f25e-4ffe-be66-5c5e7f3a3e18')
GO
-- TRANSACTION HANDLING
IF @@ERROR<>0 OR @@TRANCOUNT=0 BEGIN IF @@TRANCOUNT>0 ROLLBACK SET NOEXEC ON END
GO
IF @@TRANCOUNT>0
COMMIT
SET NOEXEC OFF
GO
Here's the code for the rdl file:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<Body>
<ReportItems>
<Tablix Name="matrix1">
<TablixCorner>
<TablixCornerRows>
<TablixCornerRow>
<TablixCornerCell>
<CellContents>
<Textbox Name="textbox3">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>#</Value>
<Style>
<FontWeight>Bold</FontWeight>
<Color>#054974</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox3</rd:DefaultName>
<ToolTip>Idea Number</ToolTip>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#fafafa</BackgroundColor>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
<TablixCornerCell>
<CellContents>
<Textbox Name="Textbox13">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Idea</Value>
<Style>
<FontWeight>Bold</FontWeight>
<Color>#054974</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Left</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox13</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#fafafa</BackgroundColor>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
<TablixCornerCell>
<CellContents>
<Textbox Name="Textbox1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Assignees</Value>
<Style>
<FontWeight>Bold</FontWeight>
<Color>#054974</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Left</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox1</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#fafafa</BackgroundColor>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
</TablixCornerRow>
</TablixCornerRows>
</TablixCorner>
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>0.95in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.3in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="textbox2">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Sum(Fields!VI_Impact.Value)</Value>
<Style>
<Format>#,###.###</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Right</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox2</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>None</Style>
</Border>
<TopBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</TopBorder>
<BottomBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</BottomBorder>
<LeftBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</LeftBorder>
<RightBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</RightBorder>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>4pt</PaddingRight>
<PaddingTop>3pt</PaddingTop>
<PaddingBottom>3pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
<DataElementOutput>Output</DataElementOutput>
</TablixCell>
</TablixCells>
</TablixRow>
<TablixRow>
<Height>0.25in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="VI_Impact">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Sum(Fields!VI_Impact.Value)</Value>
<Style>
<FontWeight>Bold</FontWeight>
<Format>#,###.###</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Right</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>VI_Impact</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>None</Style>
</Border>
<TopBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</TopBorder>
<BottomBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</BottomBorder>
<LeftBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</LeftBorder>
<RightBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</RightBorder>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>4pt</PaddingRight>
<PaddingTop>3pt</PaddingTop>
<PaddingBottom>3pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
<DataElementOutput>Output</DataElementOutput>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="matrix1_VA">
<GroupExpressions>
<GroupExpression>=Fields!VA.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!VA.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.3in</Size>
<CellContents>
<Textbox Name="VA">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!VA.Value</Value>
<Style>
<FontWeight>Bold</FontWeight>
<Color>#054974</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Right</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>VA</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>WhiteSmoke</BackgroundColor>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>4pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="Id_Pj_Id">
<GroupExpressions>
<GroupExpression>=Fields!Pj_Id.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!Id_Number.Value</Value>
</SortExpression>
</SortExpressions>
<TablixMembers>
<TablixMember>
<Group Name="matrix1_Id_Number">
<GroupExpressions>
<GroupExpression>=Fields!Id_Number.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!Id_Number.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.4in</Size>
<CellContents>
<Textbox Name="Id_Number">
<CanGrow>true</CanGrow>
<CanShrink>true</CanShrink>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Id_Number.Value</Value>
<Style />
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>Id_Number</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BottomBorder>
<Color>LightGrey</Color>
</BottomBorder>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember>
<Group Name="matrix1_Id_Name">
<GroupExpressions>
<GroupExpression>=Fields!Id_Name.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!Id_Name.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>4.81979in</Size>
<CellContents>
<Textbox Name="Id_Name">
<CanGrow>true</CanGrow>
<CanShrink>true</CanShrink>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Id_Name.Value</Value>
<Style />
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Id_Name</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>None</Style>
</Border>
<TopBorder>
<Style>Solid</Style>
</TopBorder>
<BottomBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</BottomBorder>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>3pt</PaddingTop>
<PaddingBottom>3pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember>
<TablixHeader>
<Size>1.33333in</Size>
<CellContents>
<Textbox Name="Id_Assignees">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Id_Assignees.Value</Value>
<Style />
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Id_Assignees</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>None</Style>
</Border>
<TopBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</TopBorder>
<BottomBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</BottomBorder>
<LeftBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</LeftBorder>
<RightBorder>
<Color>LightGrey</Color>
<Style>Solid</Style>
</RightBorder>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>3pt</PaddingTop>
<PaddingBottom>3pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
<DataElementOutput>Output</DataElementOutput>
</TablixMember>
<TablixMember>
<TablixHeader>
<Size>0.4in</Size>
<CellContents>
<Textbox Name="Textbox35">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style />
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox35</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>None</Style>
</Border>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember>
<TablixHeader>
<Size>4.81979in</Size>
<CellContents>
<Textbox Name="Textbox36">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Right</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox36</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>None</Style>
</Border>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>4pt</PaddingRight>
<PaddingTop>3pt</PaddingTop>
<PaddingBottom>3pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember>
<TablixHeader>
<Size>1.33333in</Size>
<CellContents>
<Textbox Name="Textbox6">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Totals</Value>
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Right</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox6</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>None</Style>
</Border>
<VerticalAlign>Middle</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>4pt</PaddingRight>
<PaddingTop>3pt</PaddingTop>
<PaddingBottom>3pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixMember>
</TablixMembers>
<KeepWithGroup>Before</KeepWithGroup>
</TablixMember>
</TablixMembers>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<RepeatColumnHeaders>true</RepeatColumnHeaders>
<RepeatRowHeaders>true</RepeatRowHeaders>
<DataSetName>DataSet1</DataSetName>
<Top>0.30375in</Top>
<Height>0.85in</Height>
<Width>7.50312in</Width>
<Style />
</Tablix>
</ReportItems>
<Height>1.845in</Height>
<Style />
</Body>
<Width>8.42925in</Width>
<Page>
<PageHeight>8.5in</PageHeight>
<PageWidth>14in</PageWidth>
<LeftMargin>0.25in</LeftMargin>
<RightMargin>0.25in</RightMargin>
<TopMargin>0.25in</TopMargin>
<BottomMargin>0.25in</BottomMargin>
<Style />
</Page>
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="VEMasterDataSource">
<DataSourceReference>VEMasterDataSource</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>c76f7aa3-8f20-4495-a1bf-0b7a2ede98e3</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="DataSet1">
<Query>
<DataSourceName>VEMasterDataSource</DataSourceName>
<CommandText>select * from zzzRptValueImpactListing</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="Id_Number">
<DataField>Id_Number</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="Id_Name">
<DataField>Id_Name</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="VA">
<DataField>VA</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="VI_Impact">
<DataField>VI_Impact</DataField>
<rd:TypeName>System.Decimal</rd:TypeName>
</Field>
<Field Name="Id_Assignees">
<DataField>Id_Assignees</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="AgType">
<DataField>AgType</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="Pj_Id">
<DataField>Pj_Id</DataField>
<rd:TypeName>System.Guid</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<Language>en-US</Language>
<ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
<rd:ReportUnitType>Inch</rd:ReportUnitType>
<rd:ReportID>86e382ea-6e9e-46b0-a5c1-7bf67abfdcf5</rd:ReportID>
</Report>

Informe 347

Buenos dias a todos, Tengo la version 2005 A PL 46.
El informe 347 para su calculo coge solo las facturas, yo en la empresa hago tambien asientos manuales y los asientos de Adquisicion de Activos fijos que tambien quiero que entren en este Informe.
He visto en el Registro diario que hay un check de Informe 347 para los asientos, lo he marcado pero sigue sin congerme estos asiento en el Informe.¿He hecho algo mal? . Si no es asi como habria que proceder para que te coja estos asientos.
Muchas gracias de antemano a todos
Edited by: Rui Pereira on Feb 23, 2009 4:33 PM

No te los coge ni los cogerá.
Tienes dos opciones:
1.- En el portal en la localización para España tienes un AddOn (uno para sql2000 y otro para sql2005)que lo calcula.
2.- SAP España ha desarrollado un AddOn de impuestos (300, 347 y 349) que lo calcula lo puedes obtener via el denominado paquete Easy Start. Este paquete también te incluye el AddOn para Crystal Reports.
Por desgracia no hace ni el 303 ni el 340 y creo que si lo hacen será vía pagándolo.
La verdad es que en cuanto a adecuaciones legales deja bastante que desear tanto el programa como SAP dando soluciones. Para España ha habido multitud de cambios legales que no hace el programa y que no se ha adaptado para que lo haga ni tiene visos que lo vaya a hacer. En resumen "lamentable".

Cotización de ccnómina calculado después de función ESV00

Buenas tardes,
Tenemos un concepto que se genera una vez calculada la base de cotización del mes (después de la función ESV00).
Dicho concepto no cotizaba, pero con los cambios legales de principios de año, tiene que empezar a cotizar.
El problema está claro... como se puede hacer que cotice un concepto, una vez procesada la ESV00??
La opción de calcularlo con la base reguladora del mes previo no es viable.
Volver a procesar la ESV00 (restaurando la IT vía AIT) tampoco, ya que da errores la función por tablas internas ya cubiertas.
Se os ocurre alguna alternativa (que no sea replicar el cálculo de la ESV00)?
Un saludo,

Hola Beatriz, efectivamente se trata de lo mismo, el pago del EPSV, ya me preguntaba si era el único con este problema, veo que no.
La verdad es que en nuestro caso el número de empleados afectados son bastantes, con salarios variables de un mes a otro, por lo que estar realizando cargas mensuales, es algo que los usuarios de nóminas no verán con buenos ojos.
De todas formas es una solución, pero me gustaría pensar que temporal, y que SAP nos ofrecerá alguna solución estándar que no pase por un desarrollo a medida.

Préstamos con tipos de interés inferiores al legal del dinero

En art.109 publicado en RDL 16-2013 aunque no se señala como cambio, se hace referencia a que para los préstamos se debe cotizar y tributar por la diferencia entre el interés pagado e interés legal del dinero vigente (4% año 2013 y 2014).
¿Ha montado alguien en su sistema algún desarrollo para contemplar este requerimiento? ¿Hay alguna nota SAP que trate sobre este tema?
Muchas gracias.

Perdón Carlos, cuando inicié la consulta la escribí y parecía correctamente pero luego se me juntaron todas las palabras en una sola línea.
La consulta es la siguiente:
El problema que se está dando es al realizar la estimación de ingresos para octubre de una empleada con contrato 430 minusvalía entre 33% y 65%
Tiene un contrato mayor de un año, lleva desde el 22.06.2010, y renovó el contrato por otro año, desde el 22.06.11 al 21.06.12, debería calcular su IRPF como para un indefinido, por los ingresos del año 2011, teniendo en cuenta que tiene una minusvalía de entre el 33 % y el 65%, el IRPF que le corresponde en función de sus ingresos hasta final de año seria 0 % y le está proponiendo un 2%
Existe una reclamación de ésta empleado por su retención en nómina, se le está practicando una retención superior a la legalmente establecida según R.D.RD 1841/1991, Art 45, 46-Dos-2, 46-Dos-3, 46-Dos-4; RD 214/1999, Art 78, 80-2, 81-2-1º
Muchas gracias por su atención,

Office 2013 Std (local) in combination with Office 2013 Pro (App-V)

Hello,
I have multiple RDS servers, that have Office 2013 Std installed locally. I did this on purpose, after reading some blogs pointing out Office 2013 is a complicated applicatie to stream well. And of course Office 2013 is highly critical to my clients.
So I have a local installation of Office 2013 Std on every RDS server.
The catch is, that the client also has an open license for Office 2013 Pro. This is because some users need to work with 'Access 2013'.
So I thought it would be nice to use App-V to stream Access 2013 to the RDS servers. I have created the package for Office 2013 Pro, with Access in it. And I succesfully published Access 2013 to the group of users. So I can use Access on the RDS servers.
The problem is, that when I click on the appliation "MSACCESS.exe", the application pops up in taskmanager and is immidiatly shut down again. So it never launches. No error, no nothing.
I can't find any directions in the server, applicatie or App-V logs in the eventviewer. Does anyone have a clue where to look?
Thanks in advance

I think to be on a safe side, using a 'true' control system like AppSense or using dedicated RDS servers would be the only legally valid option.
Even when Office (or at least Access) is virtualized, the licensing part and product key handling is done natively on the RDS servers by the 'Office 2013 Deployment Kit'. Besides others this includes a locally installed 'licensing stump'. Therefor there
can be only one Office Suite product key be assigned to a RDS server machine.
In fact you could tell the Deployment Kit to use the Office Pro key (allowing a virtualized Access to run), but then also the locally installed Office Version would (attempt to ) be licensed as 'Pro'. That potentially won't work. In fact you could re-configure
the local Standard Office installation to consume Pro licenses, but that doesn't fit to your legal licenses.
As Aaron write, legally an Office license is bound to the endpoint device, so you'd have to make sure that your Access App-V package can only be access by permitted client machines. And while App-V can filter application on the accessing user and the executing
machine, it can't filter on the accessing end-point.
Though we don't like it... 3rd party or a server silo seem the way to go.
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Mid 2013 Macbook Air fully charged but wont power on

Used my computer after 2.5 weeks and it powered on just fine - then suddenly shut off and restarted. Then it soon shut off and didnt power on again. Thought the battery had drained out so i charged it - in some time the led went from orange to green, yet it still didn't power on.
Took it to an Apple authorized service center here in my town and they diagnosed -
" Tried SMC and PRAM reset.Check with known good power adapter
mac not powering on.Check with minimal config same issue.Try to
reseat the top case same issue.Tried to reseat the Main logic board
same issue persists.No sign of physical and liquid damage.Hence need
to replace the Main logic board under exchange price. "
Saying it costs almost as much money to buy a new laptop....... And i didn't extend my AppleCare (i know, i know.. i forgot! Thought i'd wait till the end of year 1.).
Help, please!

Below is the repair Genius Bar Work Confirmation resulting from my mid 2013 MBA 1.7GHz 8GB RAM 512 GB SSD machine that was failing to start-up with or without power attached. The conclusion was it needed a new logic board. However, less than a week after receiving the machine back with a new logic board, the same symptoms (machine going to sleep and not restarting without a reset) have returned. SURELY, APPLE MUST HAVE A KNOWN ISSUE LOG OF THIS NOW WELL DOCUMENTED WIDESPREAD PROBLEM?
=========
Thank you for visiting the Apple Store. Below is a copy of your service record.
Apple Store The Oracle
20-Nov-14
0118 925 4500
Genius Bar Work Confirmation
Repair No: R139586832
Customer Information
Product Information
Craig ******
Warranty Status: Protection Plan(A)
GBR
Model: MACBOOK AIR (11-INCH,MID 2013)
Date of Purchase: 27-Jun-13
IMEI
Serial No: C0******5YW
Parts and Services
Item Number
Description
Price
Amount Due
Customer KBB
661-7472
Board, Logic, 1.7 GHz, 8 GB, Ultimate
£ 310.00
£ 0.00
S1490LL/A
Hardware Repair Labor
£ 24.00
£ 0.00
VAT
£ 0.00
Total
£ 334.00
£ 0.00
Thank you for choosing AppleCare for the repair of your Apple Product. To ensure the highest level of quality and reliability, all work is performed by AppleCare certified technicians using genuine Apple parts. If you need any future technical or administrative assistance, please contact AppleCare Support by calling (44) 0844 209 0611. Also, answers to many questions regarding the operation of your Apple Product can be found at:http://www.apple.com/uk/support. All Apple products come with a one-year limited warranty and up to 90 days of complimentary telephone technical support. To extend your coverage further, purchase the AppleCare Protection Plan. Because Apple makes the hardware, the operating system, and many applications, only the AppleCare Protection Plan gives you one - stop service and support from Apple experts, so most issues can be resolved in a single call. For more details, talk to a Specialist at your local Apple Store or visit www.apple.com/uk/applecare. Except when service is covered under Apple's one year limited warranty, an AppleCare service contract, or statutory consumer rights, the service of your product, as described above, is governed by the Apple Repair Terms & Conditions, as set forth on the Work Authorisation you signed when you originally authorised service. Note: The items identified above have been exchanged by Apple for new or refurbished parts or products. Any applicable cost is indicated adjacent to the the part(s) or product description. Service parts are subject to tax.
To view the full terms and conditions of your service, please visit:http://www.apple.com/legal/terms/repair/retailservice.html.
<Personal Information Edited by Host>

Microsoft Office Home and Business Edition 2013

Dear Team,
We are planning to procure microsoft office home and business edition 2013. We want to procure 50- Microsoft office home and business edition. Please let us know if there is any limitations in the licensing part as you have spoken to one of your
executive in microsoft. As per him we procure as many as per our requirement, it is legal for 200 users.
Thanks,
Rakesh Kumar

Hi,
I haven't found any other limitation in the licensing part except you should install Office on one PC at a time.
If you want to purchase 50 copies, I'm pretty sure there's no problem. But you may have to maintain 50 licence keys along with boxes and invoice, be careful and don't mess them up :)
Regards,
Melon Chen
TechNet Community Support

Lenovo IdeaCentre A720 - Clean Installation Windows 8.1 Pro x64 and Office 2013 x64

GUIDE: Clean Installation Windows 8.1 Pro x64 and Office 2013 x64
Note: for a good performance is recommended to use a SSD for Windows with a minimal of 128GB and use the HDD for Data
Driver up to date - Sep 2014
First you need to download and have ready the following softwares:
Classic Shell V4.1: To get back the Start Button like Windows 7
http://www.fosshub.com/Classic-Shell.html/ClassicShellSetup_4_1_0.exe
Broadcom BT for Windows 7 (64-bit) - to enable dongle, Windows 7 Live DVD and USB Drive.
http://download.lenovo.com/consumer/desktop/h1100174.exe
Realtek Cardreader Driver Windows 8.1 (64-bit) V6.2.9200.29070. To be able to use the card reader
http://download.lenovo.com/consumer/desktop/h1101061.exe
NV VGA Driver for Windows 8.1 (64-bit) V340.52. Latest video driver for NVIDIA video cards
http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/340.52/340.52-n...
Lenovo Silver Silk Keyboard Driver for Windows 8.1 (64-bit) V1.05. To be able to see when Caps Lock or Number Lock is press
http://download.lenovo.com/consumer/desktop/h1100842.exe
Yuan MC907 TV Tuner Driver for Microsoft Windows 7 (64-bit) V6.14.10.416. To be able to use the Yuan TV card
http://download.lenovo.com/consumer/mobiles/tvt129w8164.exe
OSD APP for Windows 8.1 (64-bit) V1.1.06. To be able to use UP or Down Volume for Touch keys in the screen.
http://download.lenovo.com/consumer/desktop/h1100547.exe
Windows 8.1 x64 Installation DVD and Office 2013 x64
Follow this procedure for the installation:
Install Windows 8.1 Pro x64 using the general or personal key
Just to avoid install an old Video Driver from windows update, disable the Wi-Fi or Interned connection
Install Office 2013 x64
Install the Video Driver “340.52-notebook-win8-win7-64bit-international-whql.exe” just let the setup to uncompress the files in “C:\NVIDIA” folder, do not continue to avoid the installation of other software that you may never use. Go to “Device Manager” and Right click properties in the display adapter, press “Driver” - “Update Driver” select browse my computer and give the path “C:\NVIDIA” press next and close after installation finish
Enable Wi-Fi and open Control Panel – Programs – Turn Windows features on or off and select “.NET Framework 3.5” hit OK, after the installation finish, reboot PC
Install “ClassicShellSetup_4_1_0.exe” follow instruction and configure the way you may like
Run file “h1101061.exe”, unselect “Install Realtek Card Reader Driver” and press finish. Path for driver is "C:\EXEBuild\Realtek Card Reader Driver”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\EXEBuild\Realtek Card Reader Driver” press next and close after installation finish
Install “h1100842.exe” backup driver location is “C:\EXEBuild\Lenovo Silver Silk Keyboard Driver” after installation is done, go to “C:\Program Files (x86)\Lenovo\Lenovo Silver Silk Wireless Keyboard” and Right Click in the file ‘”skd8861.exe” properties – compatibility – change setting for all users and select run compatibility mode for “Windows 7” press OK and OK
Run “tvt129w8164.exe” unselect “Install TV Tuner” and press finish. Path for driver is “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)” press next and close after installation finish
Run “h1100547.exe” unselect “Install A7 OSD APP now” and press finish. Path for driver is “D:\EXEBuild\A7 OSD APP”. Run the file “setup.exe” do not reboot the PC and ensure the folder been created during the installation “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll”, if this fail go to next step, if not, avoid next step. Normally a successful installation of this file depend of “.NET framework 3.5”
Go to control panel and uninstall “Lenovo OSD”, run the previous “setup.exe” and during the process of the installation, be ready to make a copy for the temporal file name “setup.msi” created in  “C:\Users\YOURUSERNAME\AppData\Local\Temp”, copy file “setup.msi” in “C:\” and run CMD in administrator mode and go to “C:\” using “CD \ + ENTER”, now use the following command “C:\msiexec.exe /a c:\setup.msi + Enter” the folder “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll” will be created
Create a shortcut “BrgVolOSD” and copy this in the startup folder “C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp”
Update Bluetooth driver using windows update if Windows detect the dongle, if not go to next step
If Bluetooth is not detected, mean that the actual hardware somehow is disabled. In order to enable, boot the PC with a Windows 7 live DVD with the USB drive installed in the PC. After PC been running with Windows 7 live, Install the file “h1100174.exe” previously copy in the USB drive. Use the USB drive also as installation path for the Bluetooth software, when the installation is done, look in the folder “X:\Program Files\Lenovo\Bluetooth Software” and run the file name “BTTray.exe”, press right click in the Red Bluetooth icon on the taskbar to enabled the Bluetooth dongle. Reboot PC in Windows 8.1 without any DVD media inside, this time Windows 8.1 will be able to recognize the Bluetooth and install the respective drivers.
     Another way, install the latest release from Broadcom BTW_12.0.0.9820 from the following link:
                                                                        BTW_12.0.0.9820.zip
    directly in Windows 8.1. Remember if the software is uninstall the Bluetooth will be disabled and
     Windows will not be able to see the device in the “Device Manager”
Last step, use your own Windows 8.1 Pro Key and Office 2013 key to register and activated your legal copy of the Microsoft software’s.
Final, enjoy.
This guide was creates for me to help peoples like me in this community.

bump

Outlook 2013 and Icloud issues.

To whom it may concern,
I use to have Windows 7 32 Bit and Office 2010 synced with my icloud and it worked wonderfully.
I made some changes in to my operating system and changed to Windows 7 64bit. Also I went ahead and updated to Office 2013.
Lately, I been having issues with the calendar synchronization between my Outlook 2013 and My iPhone 6 calendar and contacts. I went ahead unclicked the "contacts, calendar, and tasks (with outlook) Tab from the Icloud menu. a few second later, I proceeded to re click on the same tab to add this option previously mentioned and after clicking on "apply" a window pops up prepping a download of 0 of 10 items and inmedialy I get an error that says "Your setup couldn't be started because and expected error"... and my options are: report, try again or cancel.
After uninstalling icloud several times and reinstalling I decided to report this issue and so far have not heard back from anyone.
If anyone can help... would be greatly appreciated it.!
Thanks,
The report reads as follows:
TO: [email protected]
SUBJECT: iCloud Setup for Outlook Error Report (v4.8.12.0) - - Error: 0x80004005: Got no WebDAV objects!
Help Apple improve its products by sending us diagnostic and usage information about iCloud.
By sending this message, you agree that Apple will collect and use this information as part of its support services and to improve its products and services. To learn more about Apple's Privacy Policy, see http://www.apple.com/legal/privacy.
Your setup couldn't be started because of an unexpected error.
Error: 0x80004005: DownloadCalendars
Error: 0x80004005: Got no WebDAV objects!
AppleOutlookDAVConfig version: 4.8.12.0
Windows version (6.1.7601): Windows 7 Professional Service Pack 1 (build 7601), 64-bit
Local app data directory test: Pass
Temp directory test: Pass
Account GUID: EFF4E5AA-9847-40E3-9858-F674646C00B7
Cache Size: <Not found>
Outlook version: 15 (15.0.4693.1000), x86
Outlook location (installed): C:\Program Files\Microsoft Office 15\root\office15\outlook.exe
MAPI location: C:\Program Files\Microsoft Office 15\root\VFS\ProgramFilesCommonX86\SYSTEM\MSMAPI\3082\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
iCloud, 425DC1A925AC47B5A636EEF64AD9B6B4
Archivo de datos de Outlook(default), 4E495441F9BFB80100AA0037D96E0000
Carpetas Internet, E92FEB759650448683B87DE522AA4948
Carpetas Internet, E92FEB759650448683B87DE522AA4948
Contents of C:\Program Files\Microsoft Office 15\root\VFS\ProgramFilesCommonX86\SYSTEM\MSMAPI\3082\mapisvc.inf
[APLZODSERVICE]
PR_SERVICE_DELETE_FILES=C:\PROGRA~2\COMMON~1\Apple\INTERN~1\APLZOD.dll
PR_SERVICE_DLL_NAME=C:\PROGRA~2\COMMON~1\Apple\INTERN~1\APLZOD.dll
PR_SERVICE_SUPPORT_FILES=C:\PROGRA~2\COMMON~1\Apple\INTERN~1\APLZOD.dll
PR_DISPLAY_NAME=iCloud
PR_RESOURCE_FLAGS=SERVICE_NO_PRIMARY_IDENTITY|SERVICE_SINGLE_COPY
PR_SERVICE_ENTRY_NAME=APLZODServiceEntry
Providers=APLZODMP
[APLZODMP]
PR_PROVIDER_DLL_NAME=C:\PROGRA~2\COMMON~1\Apple\INTERN~1\APLZOD.dll
PR_DISPLAY_NAME=iCloud
PR_PROVIDER_DISPLAY=iCloud
PR_RESOURCE_FLAGS=STATUS_DEFAULT_STORE
PR_RESOURCE_TYPE=MAPI_STORE_PROVIDER
[Services]
APLZODSERVICE=iCloud
Contents of C:\Windows\system32\mapisvc.inf
[Services]
MSFAX XP=Fax Mail Transport
[Default Services]
MSFAX XP=Fax Mail Transport
[MSFAX XPP]
PR_PROVIDER_DLL_NAME=FXSXP.DLL
PR_RESOURCE_TYPE=MAPI_TRANSPORT_PROVIDER
PR_RESOURCE_FLAGS=STATUS_NO_DEFAULT_STORE
PR_DISPLAY_NAME=Fax Mail Transport
PR_PROVIDER_DISPLAY=Fax Mail Transport
[MSFAX XP]
PR_DISPLAY_NAME=Fax Mail Transport
Providers=MSFAX XPP
PR_SERVICE_DLL_NAME=FXSXP.DLL
PR_SERVICE_SUPPORT_FILES=FXSXP.DLL
PR_SERVICE_ENTRY_NAME=ServiceEntry
PR_RESOURCE_FLAGS=SERVICE_SINGLE_COPY|SERVICE_NO_PRIMARY_IDENTITY
Contents of c:\windows\Sysnative\mapisvc.inf
<Not found>
Contents of HKLM Software\Microsoft\Office
HKLM\Software\Microsoft\Office\15.0\Outlook
Capabilities
    FileAssociations
    StartMenu
    URLAssociations
InstallRoot
HKLM\Software\Microsoft\Office\Outlook
Addins
    Apple.DAV.Addin
    avast.AsOutExt
    OutlookChangeNotifier.Connect
    Search.OutlookToolbar
FormRegions
    IPM.Appointment
Contents of HKCU Software\Microsoft\Office
HKCU\Software\Microsoft\Office\15.0\Common\General
LastUILang: <Not Found>
HKCU\Software\Microsoft\Office\15.0\Common\HelpViewer\Applications\OUTLOOK
AdditionalCollections
    0
    3082
HKCU\Software\Microsoft\Office\15.0\Common\LanguageResources
UILanguage: 3082
UIFallback: ( 0;3082 )
UISnapshot: ( 3082 )
InstallLanguage: 1033
PreviousInstallLanguage: 1033
HKCU\Software\Microsoft\Office\15.0\Common\Migration\Outlook
    LastUILanguage: <Not Found>
HKCU\Software\Microsoft\Office\15.0\Common\Toolbars\Outlook
    LastUILanguage: <Not Found>
HKCU\Software\Microsoft\Office\15.0\Outlook
    LastUILanguage: 3082
AddInLoadTimes
Addins
    Apple.DAV.Addin
    avast.AsOutExt
    ColleagueImport.ColleagueImportAddin
    Microsoft.VbaAddinForOutlook.1
    OneNote.OutlookAddin
    OscAddin.Connect
    OutlookChangeNotifier.Connect
    Search.OutlookToolbar
    UmOutlookAddin.FormRegionAddin
Appointment
Appointment Request
Appointment Response
AutoDiscover
    RedirectServers
Contact
Display Types
    Balloons
Message
Office Explorer
Options
    Calendar
    General
        LastUILang: 3082
    MSHTML
      International
    Reminders
Perf
    RoamingStreamsCache
      1B86AA78E73FAC43A5DB0FEDF8AEC132
      27E892D36AE26F43951965924DE62881
      2C6DFABD29C58E43AC228E2FA9C726D4
      6338C7D4B9395045B3E9123A60868011
      A11F6597EB2FE24B898983591C704216
      B699EE5EC03FF94BA0BAD62D6E7D8F2B
      C0EA7EC50D52024BAB48C26EEC76148C
      D3E5E49672CE024E8AD8394EE56AC13C
      D53ECC084747FF40B69CE8BC8569AC47
Preferences
Printing
Profiles
    Pedro M Davila
      0a0d020000000000c000000000000046
      0c1cfef1d66fe04594f7749a06451614
      12154a8f4defeb4eb1d6e458048e56d4
      13dbb0c8aa05101a9bb000aa002fc45a
      195fec11873b9641a161392120bcf9d4
      1f1d53d9861b8142bc0dbdea29edaaf6
      2d649a90af183e499b7819646b31f314
      30c900fce395bc44b13c83276886c106
      3517490d76624c419a828607e2a54604
      357e19fc3ab27b4e9bd9cf5c15a45bd6
      4c4683e0b93f83469c44b263ddea3960
      5d907fd4f80e9d499fcb2665421bdd09
      5dd239710e234d428f12a7bc5fe3fef8
      682ff9621b724040b0b7a625785fe21c
      8503020000000000c000000000000046
      859c451ffda3b348a9b6c6ae25378b70
      8c27550e63df2449809d0820e9322208
      9207f3e0a3b11019908b08002b2a56c2
      92396cadf7c6fe439b97da2b994ca444
      9375CFF0413111d3B88A00104B2A6676
        00000001
        00000002
        00000004
        00000005
        00000006
      a667fea1e3efe249a72f1f3fd951a565
      c8a2db0f78e732428fb3bbd3951f4ccc
      cc3d97b0bb160449be76369048fd57bf
      cff756223ae64d4ab524d1c900f4471e
      ddb0922fc50b8d42be5a821ede840761
      e339afbc374eaa49be8ee55b89eabf73
      eca8e90edd5e7642a94f20cdfb76cf06
      f86ed2903a4a11cfb57e524153480001
Resiliency
    CrashingAddinList
    DisabledItems
    DoNotDisableAddinList
Search
    Catalog
Security
Setup
SQM
Today
    Folders
UserInfo
HKCU\Software\Microsoft\Office\15.0\User Settings\Outlook_Core
HKCU\Software\Microsoft\Office\15.0\User Settings\Outlook_Intl
HKCU\Software\Microsoft\Office\15.0\User Settings\Outlook_SocialConnector
HKCU\Software\Microsoft\Office\15.0\User Settings\Outlook_SocialProviderFB
HKCU\Software\Microsoft\Office\15.0\User Settings\Outlook_SocialProviderLI
HKCU\Software\Microsoft\Office\15.0\User Settings\Outlook_SocialProviderMOSS
HKCU\Software\Microsoft\Office\8.0\Outlook
    LastUILanguage: <Not Found>
HKCU\Software\Microsoft\Office\Outlook
    LastUILanguage: <Not Found>
Addins
    ColleagueImport.ColleagueImportAddin
    iTunesAddIn.CalendarHelper
    OscAddin.Connect
    TelemetryAddin.Connect
SocialConnector

Hello davilapm,
Thanks for using Apple Support Communities.
If you are having issues with iCloud Calendar on your Windows PC, then I'd like you to please follow the troubleshooting in the article linked to below. The reports you are sending are a great help to our engineering team.
Get help using iCloud Calendar - Apple Support
Take care,
Alex H.

Novedades y Cambios Legales 2013

Similar Messages

Maybe you are looking for