Novell Groupwise email access

I know this isn't exactly an Apple question, but I imagine others have had similar trouble. I was recently granted a university email account with access only through Novell Groupwise webmail (V 7.0). I can't stand logging into the webmail, so I'm trying to add the account to my Mail application, and thus my iPhone as well. I can't figure out what protocol is being used, nor can I determine any server settings. Their IT department appears to be non-existent. Any ideas or help is much appreciated.
- Alex

Take a look at this thread:
http://discussions.apple.com/thread.jspa?messageID=5964059&#5964059
You'll need the appropriate server information from the university.

Similar Messages

Novell groupwise email wont work on playbook

My school uses novell groupwise for emails. My account easily works on my BlackBerry phone, but it gives errors on the playbook when setting up the account. Anybody know how to get it to work? Maybe how i can get any extra informaition i need about the account to sync it on my playbook.

Hi burton21
I would recommend contacting the IT department to verify the server settings. The following article will also assist in getting your email account configured on your BlackBerry® PlayBook™.
KB30047 - How to add a mail account to the BlackBerry PlayBook using Advanced Integration
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Synching itouch with novell groupwise

Our university uses Novell groupwise email. We are contemplating purchasing itouch for our nursing students but wonder about whether we will be able to use groupwise. any advice?

I have set up my Novell Groupwise account at two separate Universities (I study at one, work at the other) and both work fine with the Touch mail program - no need to use the web interface. You may need some help from your IT department to get port numbers or server addresses but the Touch does auto-detect quite well.
To sync calendars and things, you will need to have outlook installed on your computer and set up to access your Groupwise server - easy enough - as the Touch syncs with Outlook. Interesting thing is that you don't have to every USE Outlook, just make sure it is set up to access data from your GroupWise account.
I wish Apple would include direct GroupWise conduit!

EP 6.0 SP2 integration with Novell Groupwise

Hi,
I am trying to integrate novell groupwise (email system) with EP 6.0 Collaboration Launch pad. So user can get all the functionality of CLP. Rightnow EP6 support only lotus and MS exchange server (out of the box). Seems we need to write some email transport, using KM java API. Please send me some how to guides or step-by-step info or some sample code. It would be very helpful.
Thanks
Regards
gana

I have got very good experiences with Groupwise connectivity with the SAP Portal over KM Transport APIs.
Is your question still relevant?
If you want information, contact me.
My contact information can be found in my SDN personal profile.
Best Regards,
Hüdayi Mengus
Edited by: Hüdayi Mengus on Aug 19, 2009 12:39 AM

Novell Groupwise to Hosted Exchange Migration

We are looking to migrate a client from Novell Groupwise Email to Hosted Exchange. It seems the only toll available to assist with this type of migration is the following:
http://www.quest.com/groupwise-migrator-for-exchange/
Does anyone know of any tools that Microsoft provides that are similar to this? I cannot really find any information via searching google, the microsoft partner portal...etc...
Thanks,
Ian

Most cusotmers moving from Groupwise utilize Quest Tools.
A couple other options, depending on the size of your user base:
http://www.nucleustechnologies.com/migrate-groupwise-to-exchange.html?gclid=CI-Pu6q8sKcCFQpvbAodLGjD_w
http://www.migrationwiz.com/Public/landing/groupwisemigrations.aspx?gclid=COX0jc28sKcCFQkFbAodBFngBw
If it wasn't difficult, it wouldn't be fun, but why's it got to be this much fun.

Forwarding e-mail from Novell Groupwise

I have an iPhone 3G. For about the past year, I have had my work e-mail forwarded to my Gmail account for access outside of work. It has worked perfectly. The work e-mail sysyem is Novell Groupwise on a Dell. This past weekend, the e-mail started showing up on my iPhone mail account, using the "Mail" app, with a proper title but showing "This e-mail has no content". My regular Gmail account, using the Gmail app, on my iPhone receives the e-mail with content. I noted that last weekend Microsoft was updated on my work computer. Any ideas what causes this problem, and any solutions?

OK I think I've got an answer.
Forwarding doesn't seem to work because it now seems that Iphone can't pick up forwarded as attachment emails.
If you just forward an eamil not as an attachment it will be ok but the problem is Groupwise when it forwards by rule does it as an attachment.
If you use the delegate option instead of forward it forwards in exactly the same way except not as an attachment so you can see what has been forwarded.
Hope that makes sense - basically use delegate not forward!

Unity Connection 8.x and Novell GroupWise IMAP client.

Hi,
Unity Connection 8.x clusters, the customer is using Novell Groupwise for email message store. We would like to setup GroupWise IMAP for them.
However one of the customer's restrictions is that they locked down the end-users computers so that Unity Connection message can not be downloaded into end-user's local PC.
I understand that on Unity Connection COS we can setup the option end-user can only access message header, but they have to dial-in the main-pilot number to retrieve message or use web-inbox tool.
(1) Is there any way for us to setup the IMAP, so that end-user retrieve message while the message is still in centralized Unity Connection server?
(2) If option (1) is not possible, can we setup the message folder of IMAP client to a network shared drive such as H, M drive instead of default local drive?
(3) Any other solution or workaround?
Thanks,
JJ

See sample depiction below of applications and physical core usage on a server with 2 CPUs and 8 total physical cores. In white is the reservation of one physical core.
Regards.

Novell groupwise

Will zenworks for handheld work with novell groupwise over a wifi
connection to send and receive email real time?

On Thu, 27 May 2004 19:03:20 GMT, [email protected] wrote:
> Will zenworks for handheld work with novell groupwise over a wifi
> connection to send and receive email real time?
this is probably best asked in the GW forum... and ZFH is only management
not really access to other novell products..
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

GroupWise Web Access License?

Is GroupWise Web access available to us as users of Small Business Suite 6.5?
Thanks,
Seth Longmire

Thanks very much!
>>> Anders Gustafsson<[email protected]> 9/1/2006 11:57 AM >>>
Seth Longmire,
> Is GroupWise Web access available to us as users of Small Business Suite 6.5?
>
Yes. It is part of GW 6.5.
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195

Mac compatibility with 'Novell Groupwise' PC network

Hi all
I'm currently working on a PC, but my company is 'looking into' buying me and my colleague Macs (We're the Graphic Designers for a large organisation).
I've worked on Macs for 15+ years. However, the company uses 'Novell Groupwise' for all its e-mails and network stuff.
They are very nervous about Macs, and wouldn't want one on the network, which would make sending/receiving e-mails and printing to network printers next to impossible!
We could use a USB printer, but we also have large format stuff, which is network only.
Does anyone have any experience of using a Mac on a Novell network?
I'd welcome any information, as I would like to be able to have some definitive stuff to go to the bosses with to try to convince them that Macs aren't poisonous and likely to infect the rest of the system!

Hi Mikey.
First: sorry for my bad english
After years i work with a MacMini in a PC Network organisation.
Our mail server is a Novell Groupwise 7.x.
I have 3 choices:
1. Groupwise client 7.0.3 (a Java client similar to PC Client).
2. Groupwise web Access (web client)
3. PC Groupwise client in a virtual machine with VMWare or Parallel.
My MacMini is a 1gb machine and my light solution is 2.
Unlikely GWclient doesn't support notifications.
I'm in network and smb connection works well.
So.. i support our graphics minds all in mac.
In august is my first birthday with mac at work
Hope this can help you.
Beppe

Submit problem using Adobe Designer 7.0 form & GroupWise email

We are designing an interactive form using Adobe Designer 7.0, and would like for other people in the organization to be able to fill in the form electronically then hit the "Submit by Email" to return the data.
For email, we are using Novell GroupWise.
Problems are occurring once the recipient of the form selects the "Send Data File" button. This action either causes Adobe to crash, or causes an error message, "Acrobat is unable to connect to your email program."
Can anyone help? Is anyone successfully using this function with GroupWise email?

I don't really have a solution for you - perhaps the following may be of use though:
Try reinstalling Designer 7 and ensure that at the point where you are asked about your e-mail client that you tell it that you are using GroupWise.
You may like to see if you can send an e-mail using the same method that we employ.
This is the script we use on the 'click' event of a button that sends an e-mail with the form attached (via GroupWise) to the e-mail address as specified ("[email protected]" in the example below).
var myDoc = event.target;
myDoc.mailDoc(false,"[email protected]", "", "",
"This is will appear in the subject line....",
"Here is the message text............");

Can we pass Workflow's text description to Novell Groupwise subject line ??

Hi experts,
I have a MM workflow which runs whenever a person creates some material requirement. And that requirement goes to the approver's Groupwise(External Email).
So my requirement is:-
If there is any way to pass Workflow's text description to Novell Groupwise Subject Text, so that endusers can be informed of the nature of the workflow.
Thanks in Advance
Anu

What you need to do first is to set this mailbox as a primary profile in outlook (** temporarily - just for the purpose of creating a server side autoreply rule).
http://support.microsoft.com/kb/829918/en-us?spid=2520&sid=1309
Once this mailbox has been set as the primary profile, then go to tools => Rules and Alerts => New Rule => Start from a Blank Rule then select "check messages when they arrive" => Next=> then select "Where my name is in the To or Cc box" = Next => then select "Have server reply using a Specific Message" on the Step2 box underneath, click "a specific template" then compose the autoreply on the body of the email and put the subject you want on the sibject field. Once completed composing the autoreply dont forget to click "Save and Close". => Next => Next => Finish.
Close your outlook and let someone try to send a test email to the "secondary mailbox". They should be able to receive an autoreply regardless if your outlook is closed.

Suddenly can't open groupwise emails via groupwise app; invalid or missing cookies

Using my ipad2 I Suddenly can't open groupwise emails via groupwise app; invalid or missing cookies

Did you just upgrade to iOS v7?
Are you using Ghost Pattern software to access GroupWise?
If Yes, they have an update for iOS 7 at
https://itunes.apple.com/us/app/gw-mail/id335575354?mt=8

Novell Groupwise Setup for iPhone

I have finally set up my iPhone to receive e-mail from my Novell Groupwise 7.0 mail system. To accomplish this, I used IMAP, entered my server's host name, my user name and password as requested. The hangup appears to have been that my server did not allow me to send mail via the phone since the phone is on another network (ATT's) than the mail server and relaying was prohibited. For the outgoing settings, I entered the generic ATT smtp host name of cwmx.com with no user name or password entered.
I disabled the wireless connection to make my initial account connection and to establish the account verification. I did this because I understand that cwmx.com only works on the EDGE network. Also, while trying to set up the iPhone mail account on wireless, if you don't have all the settings correct, or can't make the full verification of both incoming and outgoing, you will get a verification failure.
Once I took these steps, I was able to immediately connect. This connection created the account on my mail application so that I could then go deeper into advanced settings. I ensured that SSL was turned off. I saw that the incoming port was set to 143. The Apple technician had suggested using the default setting of 110, however, this did not work for me. When I reverted to 143, it worked immediately. The smtp port was set automatically to the default :25
I was able to receive all my work mail, and was able to send myself a reply using the EDGE network. When I then connected to wireless, I was also able to receive an e-mail. However, when I replied using wireless, the e-mail did not send, as expected. Once it failed, I found the message in the outbox and expect that once I disable wireless, or am on the EDGE network naturally, it will send. As I type this, I am on the EDGE network and the phone indicates that it is 'connecting', so I may still have some bugs to work out, but at least 60 messages came through from the server when I had not been able to connect ever before.

I have similar settings for Groupwise at work, I believe. What you posted is similar to what I see when I try to log in and it fails. It gives me a manual log in screen which has the :1677 portion.
I'm not a tech guy, I just worked with my tech guy to figure out that our Gwise server (for a city government) wouldn't allow me to access it remotely to send an e-mail so we had to trick the phone into using the ATT outgoing server to send an e-mail.
Once I had my account set up, I was able to create an account for a colleague while she was trying to access her account on her Treo. While she was fiddling with it, I duplicated my settings with her account name and password and it immediately worked on my phone with her account.
Our settings are IMAP. We didn't have to use the 10.21.1.20 type of settings at all.
As I re-read your post, it's not clear if you are using the wireless connection or if you are on the edge network. I couldn't get the account to connect initially until I disabled wireless within the settings section. Once I did that, it connected, created the validation and gave me an established account under the mail tab. Once I had that, I could go into the advanced settings and disable SSL, etc.
Now, I seem to be able to receive Groupwise e-mail through wireless connections, but have to be on the EDGE network to send.

UCCX with Novell GroupWise

Hi,
I use integration UCCX with Novell GroupWise. All the abilities has working good. But sometimes, when i send e-mail to customer, I have double mails...
Why is this happening?
Thanks
Sergei

Hi Gergely,
UCCS Version 8.5.1 SU1
UCCX Premium ( not UCCE)
Unfortunately, I do not know what it is a problem. When i send email (answer) to a customer, it is duplicated. But it happen sometimes, about 7 out of 10 sendings. First, I thought that the problem is WAN, because of EMAIL Server and UCCX are in deferent cities, perhaps it is problem in network.
Last week, I used other EMAIL Server in the same city as UCCX (LAN), but that problem happened again
Sergei

Novell Groupwise email access

Similar Messages

Maybe you are looking for