Novell groupwise

Will zenworks for handheld work with novell groupwise over a wifi
connection to send and receive email real time?

On Thu, 27 May 2004 19:03:20 GMT, [email protected] wrote:
> Will zenworks for handheld work with novell groupwise over a wifi
> connection to send and receive email real time?
this is probably best asked in the GW forum... and ZFH is only management
not really access to other novell products..
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Similar Messages

New meeting in my BB Calendar not visible in Novell Groupwise

Hello,
I have a little problem with my BB 8900 Curve.
When i want to create a new "meeting" in the calendar and check the "all the day" option, i can't see it in my Novell Groupwise client.
It's registered as a "Note", but not as a "Meeting".
Do you have and idea or a solution to help me ????
Thx a lot
SMO

Hi and Welcome to the Forums!
Due to the specialness, MAC/BB integration actually has a complete forum on this site...and I'm thinking that you'll find your best help there. Don't double post, though -- we'll have the mods move this to:
http://supportforums.blackberry.com/rim/board?board.id=blackberryformac
and that way the right experts will have the greatest exposure.
Good luck!
Message Edited by sdgardne on 09-03-2009 01:49 PM
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Reset password in Novell GroupWise from OIM

Hi , I am encountering the following problem
1. we have set up Provisioning in Novell eDirectory and Novell GroupWise
2. the accounts are provisioned succesfully
3. when we change the password from OIM, the change is reflected in eDirectory , but not in GroupWise.
Also. in the User Detail >> Resource Profile >> Resource Provisioning Details for GroupWise , the Change User Password Task is 'Completed' and the following information can be seen in the log:
INFO RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - NWDSLogin was successful
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ~~~~~~~~~~Exiting ndsconnect:connectToNDS(0)~~~~~~~~~~
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ~~~~~~~~~~Exiting main:jproxyConnectToNDS(0)~~~~~~~~~~
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ----------Entering resetUserPassword()----------
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - Params rcvd: pDomainPath=( cn=ase-do.o=ase )
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - Params rcvd: pEDirTree=( ase-tree )
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - Params rcvd: bstrUserID=( TESTUSER07 )
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - Params rcvd: varPostOfficeDN=( cn=ASE-PO.o=ASE )
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - Params rcvd: varPasswordFlag=( 1 )
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ----------Entering initGroupWise()----------
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - Params rcvd: pDomainPathToConnect=( cn=ase-do.o=ase )
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - Params rcvd: pEDirectoryTree=( ase-tree )
INFO RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - Connected by connectByDN() method( cn=ase-do.o=ase )
INFO RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - connected to groupwise sytem of name= ASE-MAIL
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ~~~~~~~~~~Exiting initGroupWise(0)~~~~~~~~~~
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - IsUserNameUnique returned ( 0 )
INFO RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - User Reset Password update success (Ret code: 1 )
INFO RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - User Reset Password commit success (Ret code: 0 )
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ----------Entering exitGroupWise()----------
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ~~~~~~~~~~Exiting exitGroupWise(0)~~~~~~~~~~
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ~~~~~~~~~~Exiting resetUserPassword(0)~~~~~~~~~~
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ----------Entering ndsconnect:disconnectFromNDS()----------
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ~~~~~~~~~~Exiting ndsconnect:disconnectFromNDS(-1)~~~~~~~~~~
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ~~~~~~~~~~Exiting main:Java_tcUtilGroupWise65RemoteLib_resetUserPassword(0)~~~~~~~~~~
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ----------Entering gwerrorcodes:getErrorString()----------
INFO RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - returning response code=( GW_PASSWORD_RESET_SUCCESSFUL )
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - ~~~~~~~~~~Exiting gwerrorcodes:getErrorString()~~~~~~~~~~
DEBUG RMI TCP Connection(48)-192.168.3.57 XL_INTG.GROUPWISE - =~=~=~=~=~=~=Exiting tcUtilGroupWiseOperations:gwResetUserPassword(0,GW_PASSWORD_RESET_SUCCESSFUL) =~=~=~=~=~=~=
DEBUG RMI TCP Connection(48)-192.168.3.57 XELLERATE.REMOTEMANAGER - o : GW_PASSWORD_RESET_SUCCESSFUL
DEBUG RMI TCP Connection(48)-192.168.3.57 XELLERATE.REMOTEMANAGER - Class/Method: RemoteManager/invokeInstanceMethod left.

Provide the OIM links for registration and forgot password.
If your OAM has a user store(LDAP) where OIM is provisioning, your changes will be reflected in OAM
Hope this helps,
Sagar

Does iPhone calendar sync with Calendar in Novell GroupWise?

My business calendar is on Novell GroupWise; will the iPhone sync with this calendar if I set up iTunes on my office PC?

Here is an update for anyone who has a similar problem. I worked with our IT guy for most of a week. I also used this thread and a conversation with the iPhone call in support. Alexander at iPhone support really took time and consulted others. No one could come up with a solution. Finally, the IT guy and I found a computer in our office that was still using GW 6.5. After adding Outlook 2003 and iTunes, the sync worked. We then stripped Groupwise, Outlook, all the .ics files and profiles, and iTunes from my computer. We added GW 6.5, Outlook 2003 and iTunes that order. The sync worked. We added GW 7 to the other computer and got the orginal error message about the file store. In adding GW 7 to the other computer, the IT person noticed that GW 7 gives a notice tha GW 7 is changing some files. We then added the GW 7-Outlook Connector. The connector allowed Outlook to open and see the GW 7 calendar. However, ITunes could not sync the iPhone with Outlook. Even completely stripping iTunes completely and reinstalling did not allow Outlook to sync through iTunes to the iPhone. I am back to using 6.5. My conclusion is that GW7 makes changes in the files that do not allow syncing to an iPhone at present in Window XP. I cannot speak to whether it would work on a Mac. This is an issue that Apple needs to address (are you listening Apple?)

EP 6.0 SP2 integration with Novell Groupwise

Hi,
I am trying to integrate novell groupwise (email system) with EP 6.0 Collaboration Launch pad. So user can get all the functionality of CLP. Rightnow EP6 support only lotus and MS exchange server (out of the box). Seems we need to write some email transport, using KM java API. Please send me some how to guides or step-by-step info or some sample code. It would be very helpful.
Thanks
Regards
gana

I have got very good experiences with Groupwise connectivity with the SAP Portal over KM Transport APIs.
Is your question still relevant?
If you want information, contact me.
My contact information can be found in my SDN personal profile.
Best Regards,
Hüdayi Mengus
Edited by: Hüdayi Mengus on Aug 19, 2009 12:39 AM

Mac compatibility with 'Novell Groupwise' PC network

Hi all
I'm currently working on a PC, but my company is 'looking into' buying me and my colleague Macs (We're the Graphic Designers for a large organisation).
I've worked on Macs for 15+ years. However, the company uses 'Novell Groupwise' for all its e-mails and network stuff.
They are very nervous about Macs, and wouldn't want one on the network, which would make sending/receiving e-mails and printing to network printers next to impossible!
We could use a USB printer, but we also have large format stuff, which is network only.
Does anyone have any experience of using a Mac on a Novell network?
I'd welcome any information, as I would like to be able to have some definitive stuff to go to the bosses with to try to convince them that Macs aren't poisonous and likely to infect the rest of the system!

Hi Mikey.
First: sorry for my bad english
After years i work with a MacMini in a PC Network organisation.
Our mail server is a Novell Groupwise 7.x.
I have 3 choices:
1. Groupwise client 7.0.3 (a Java client similar to PC Client).
2. Groupwise web Access (web client)
3. PC Groupwise client in a virtual machine with VMWare or Parallel.
My MacMini is a 1gb machine and my light solution is 2.
Unlikely GWclient doesn't support notifications.
I'm in network and smb connection works well.
So.. i support our graphics minds all in mac.
In august is my first birthday with mac at work
Hope this can help you.
Beppe

Forwarding e-mail from Novell Groupwise

I have an iPhone 3G. For about the past year, I have had my work e-mail forwarded to my Gmail account for access outside of work. It has worked perfectly. The work e-mail sysyem is Novell Groupwise on a Dell. This past weekend, the e-mail started showing up on my iPhone mail account, using the "Mail" app, with a proper title but showing "This e-mail has no content". My regular Gmail account, using the Gmail app, on my iPhone receives the e-mail with content. I noted that last weekend Microsoft was updated on my work computer. Any ideas what causes this problem, and any solutions?

OK I think I've got an answer.
Forwarding doesn't seem to work because it now seems that Iphone can't pick up forwarded as attachment emails.
If you just forward an eamil not as an attachment it will be ok but the problem is Groupwise when it forwards by rule does it as an attachment.
If you use the delegate option instead of forward it forwards in exactly the same way except not as an attachment so you can see what has been forwarded.
Hope that makes sense - basically use delegate not forward!

GW POA Can't write .pid file to var/run/novell/groupwise

I'm running GW 8.0.2 HP2 on SLES 10, and just recently figured out after trying to set up a CRON job that I can't restart my POA without rebooting the server. When I run a rcgrpwise status, the POA shows as "unused." Running rcgrpwise stop or restart fails to stop the POA, though the domain goes up and down with no issue. I've checked my gwha.conf file, and everything appears to be in the correct case, and referencing the correct locations. The domain can create its .pid file in /var/run/novell/groupwise just fine.....
I've read and followed the directions in the tid 7003322 (which sounded like a direct match for this issue), but when I edit the header for the POA an rcgrpwise status returns that it is "unable to check [@gw4post.poa]"
The forum thread titled: "rcgrpwise status shows "unused", but it is running." also sounds like the same problem, but there was no resolution.
Anyone have any ideas? Please let me know if I can provide any further informnation - I'm writing this at 0-dark-30 and probably left something out....
Thanks,
Stacey

Okay, so your stuff looks good.
Yes, when the system boots it's supposed to basically load/fire up the rcgrpwise script (more or less, but it reads the gwha.conf file)
That is quite odd that if you bounce the server, it's fine.
Greg is correct that the PID file(s) get written to the directory where your log files are at.
Do you know where you log directories are at for the MTA/POA?
They should be in diff. directories.
Brief section from the docs:
If you selected Launch GroupWise Agents on System Startup in the Installation program, the Installation program configured your system so that the agents start automatically each time you restart your server. The Agent Installation programs always creates a grpwise startup script in /etc/init.d for starting the agents, as described in Starting the Linux GroupWise Agents as Daemons. To enable automatic startup, the Agent Installation programs also create symbolic links named Snngrpwise in the rc3.d and rc5.d directories so that the agents load on restart into level 3 or 5, depending on the configuration of your Linux system. The value of nn is determined by the chkconfig command during installation so that the GroupWise agents are started in the proper sequence with other processes running on the server.
When the grpwise script runs and starts the GroupWise agents, the agents read the agent startup files in /opt/novell/groupwise/agents/share to check for configuration information provided by startup switches. Because the --show switch cannot be used in the startup files, the agents do not run with server console interfaces when started automatically when the server restarts, unless you modify the gwha.conf file as described in Enabling the High Availability Service for the Linux GroupWise Agents.

Can we pass Workflow's text description to Novell Groupwise subject line ??

Hi experts,
I have a MM workflow which runs whenever a person creates some material requirement. And that requirement goes to the approver's Groupwise(External Email).
So my requirement is:-
If there is any way to pass Workflow's text description to Novell Groupwise Subject Text, so that endusers can be informed of the nature of the workflow.
Thanks in Advance
Anu

What you need to do first is to set this mailbox as a primary profile in outlook (** temporarily - just for the purpose of creating a server side autoreply rule).
http://support.microsoft.com/kb/829918/en-us?spid=2520&sid=1309
Once this mailbox has been set as the primary profile, then go to tools => Rules and Alerts => New Rule => Start from a Blank Rule then select "check messages when they arrive" => Next=> then select "Where my name is in the To or Cc box" = Next => then select "Have server reply using a Specific Message" on the Step2 box underneath, click "a specific template" then compose the autoreply on the body of the email and put the subject you want on the sibject field. Once completed composing the autoreply dont forget to click "Save and Close". => Next => Next => Finish.
Close your outlook and let someone try to send a test email to the "secondary mailbox". They should be able to receive an autoreply regardless if your outlook is closed.

SAP Groupware Connector for Novell GroupWise

Hi all,
I have a task that "investigate SAP CRM and Novell GroupWise integration". I wanna ask you that:
Can SAP CRM synchronizes with groupwise?
do we have a SAP Groupware Connector for Novell GroupWise?
Regards,
Chuong Hoang

Hi,
sorry for my slowly respond.
according to information shared from help.sap.com. I know that:
"SAP provides two SAP Groupware Connectors, one for MS Exchange Server and the other for Lotus Domino Server."
"The SAP Groupware connector consists of:
      _ SAP Groupware connector.
      _ SAP Groupware connector proxy."
in case that I need a connection between SAP CRM and Novell GroupWise, what will I can do???
     1. Do I need to develop my own SAP Groupware connector, which consists of 2 listed things above?
     2. Is it possible to do that?
Please help me answer these questions.
Regards,
Chuong Hoang

Novell Groupwise 8.0

At my work we use a e-mail system called Novell Groupwise 8.0. We are allowed to check e-mails at home either by using a web version of this or simply downloading the program from the website at the job. I prefer using the program that you can download because it works better.
When I bought the Imac I tried downloading the version for Macs. I downloaded, followed the instructions and was able to install. There's a problem though once I tried signing on I kept getting a message stating: "Cannot Launch Java Application: Uncaught exception in main method: Java.lang.nullpointer exeception". Anyone familiar with this issue? I tried uninstalling and reinstalling it a dozen of times but I still get the same thing. Also, when this happen I have to force quit groupwise because it just doesn't close.
I did put in a work ticket at my job on their IT site but I figured I post this here since they tend to take forever.

Good day
We use GW 6,7 and going to 8 throughout our company. When we started to rollout Intel based macs, the software was available to download but the exact same java exception errors occurred. We noticed some macs had an older java client installed and the software would launch. This lead us to believe Novell was producing their software on older non-apple patched systems. The software would only run if your system matched theirs software level for level.
We approached Novell and they recompiles the java application again using newer java and the problems was solved. The updates received were tiny upgrades to the web posted version. Contact them of have your IT Support do so and request a newer version.
Take care

Setting up work e-mail account - Novel Groupwise Webmail

How do I go about setting up my work e-mail? It is through a server called Novel Groupwise Webmail and I can't seem to figure it out. Is this server even compatible?

http://blog.oit.wvu.edu/2009/04/07/gmigrate/
http://www.macnn.com/articles/08/08/14/groupwise.iphone.sync/

Novell Groupwise to Hosted Exchange Migration

We are looking to migrate a client from Novell Groupwise Email to Hosted Exchange. It seems the only toll available to assist with this type of migration is the following:
http://www.quest.com/groupwise-migrator-for-exchange/
Does anyone know of any tools that Microsoft provides that are similar to this? I cannot really find any information via searching google, the microsoft partner portal...etc...
Thanks,
Ian

Most cusotmers moving from Groupwise utilize Quest Tools.
A couple other options, depending on the size of your user base:
http://www.nucleustechnologies.com/migrate-groupwise-to-exchange.html?gclid=CI-Pu6q8sKcCFQpvbAodLGjD_w
http://www.migrationwiz.com/Public/landing/groupwisemigrations.aspx?gclid=COX0jc28sKcCFQkFbAodBFngBw
If it wasn't difficult, it wouldn't be fun, but why's it got to be this much fun.

Novell Groupwise Setup for iPhone

I have finally set up my iPhone to receive e-mail from my Novell Groupwise 7.0 mail system. To accomplish this, I used IMAP, entered my server's host name, my user name and password as requested. The hangup appears to have been that my server did not allow me to send mail via the phone since the phone is on another network (ATT's) than the mail server and relaying was prohibited. For the outgoing settings, I entered the generic ATT smtp host name of cwmx.com with no user name or password entered.
I disabled the wireless connection to make my initial account connection and to establish the account verification. I did this because I understand that cwmx.com only works on the EDGE network. Also, while trying to set up the iPhone mail account on wireless, if you don't have all the settings correct, or can't make the full verification of both incoming and outgoing, you will get a verification failure.
Once I took these steps, I was able to immediately connect. This connection created the account on my mail application so that I could then go deeper into advanced settings. I ensured that SSL was turned off. I saw that the incoming port was set to 143. The Apple technician had suggested using the default setting of 110, however, this did not work for me. When I reverted to 143, it worked immediately. The smtp port was set automatically to the default :25
I was able to receive all my work mail, and was able to send myself a reply using the EDGE network. When I then connected to wireless, I was also able to receive an e-mail. However, when I replied using wireless, the e-mail did not send, as expected. Once it failed, I found the message in the outbox and expect that once I disable wireless, or am on the EDGE network naturally, it will send. As I type this, I am on the EDGE network and the phone indicates that it is 'connecting', so I may still have some bugs to work out, but at least 60 messages came through from the server when I had not been able to connect ever before.

I have similar settings for Groupwise at work, I believe. What you posted is similar to what I see when I try to log in and it fails. It gives me a manual log in screen which has the :1677 portion.
I'm not a tech guy, I just worked with my tech guy to figure out that our Gwise server (for a city government) wouldn't allow me to access it remotely to send an e-mail so we had to trick the phone into using the ATT outgoing server to send an e-mail.
Once I had my account set up, I was able to create an account for a colleague while she was trying to access her account on her Treo. While she was fiddling with it, I duplicated my settings with her account name and password and it immediately worked on my phone with her account.
Our settings are IMAP. We didn't have to use the 10.21.1.20 type of settings at all.
As I re-read your post, it's not clear if you are using the wireless connection or if you are on the edge network. I couldn't get the account to connect initially until I disabled wireless within the settings section. Once I did that, it connected, created the validation and gave me an established account under the mail tab. Once I had that, I could go into the advanced settings and disable SSL, etc.
Now, I seem to be able to receive Groupwise e-mail through wireless connections, but have to be on the EDGE network to send.

UCCX with Novell GroupWise

Hi,
I use integration UCCX with Novell GroupWise. All the abilities has working good. But sometimes, when i send e-mail to customer, I have double mails...
Why is this happening?
Thanks
Sergei

Hi Gergely,
UCCS Version 8.5.1 SU1
UCCX Premium ( not UCCE)
Unfortunately, I do not know what it is a problem. When i send email (answer) to a customer, it is duplicated. But it happen sometimes, about 7 out of 10 sendings. First, I thought that the problem is WAN, because of EMAIL Server and UCCX are in deferent cities, perhaps it is problem in network.
Last week, I used other EMAIL Server in the same city as UCCX (LAN), but that problem happened again
Sergei

Unity Connection 8.x and Novell GroupWise IMAP client.

Hi,
Unity Connection 8.x clusters, the customer is using Novell Groupwise for email message store. We would like to setup GroupWise IMAP for them.
However one of the customer's restrictions is that they locked down the end-users computers so that Unity Connection message can not be downloaded into end-user's local PC.
I understand that on Unity Connection COS we can setup the option end-user can only access message header, but they have to dial-in the main-pilot number to retrieve message or use web-inbox tool.
(1) Is there any way for us to setup the IMAP, so that end-user retrieve message while the message is still in centralized Unity Connection server?
(2) If option (1) is not possible, can we setup the message folder of IMAP client to a network shared drive such as H, M drive instead of default local drive?
(3) Any other solution or workaround?
Thanks,
JJ

See sample depiction below of applications and physical core usage on a server with 2 CPUs and 8 total physical cores. In white is the reservation of one physical core.
Regards.

Novell groupwise

Similar Messages

Maybe you are looking for