Novell-proxydhcpd option 97 at DHCP_ACK fail
Hi,
my ZfD server with workin PXE Booting on OES 2 (Suse) after installing new DNSDHCP console crash. In the log file I see that proxydhcp send nonsens (DHCP_ACK after option 54). How I repair this ?
Feb 08, 2010 10:57:28 > DHCP_ACK sent to 10.29.2.153:68
Feb 08, 2010 10:57:28 > Opcode: 2 Feb 08, 2010 10:57:28 > BOOTREPLY
Feb 08, 2010 10:57:28 > Hardware address type: 1
Feb 08, 2010 10:57:28 > Hardware address len: 6
Feb 08, 2010 10:57:28 > Hop count: 0
Feb 08, 2010 10:57:28 > Transaction ID: 0x4c1a288e
Feb 08, 2010 10:57:28 > Client elpased time: 0x10
Feb 08, 2010 10:57:28 > Flags: 0x0
Feb 08, 2010 10:57:28 > Client self-assigned addr: 0.0.0.0
Feb 08, 2010 10:57:28 > Client IP address: 0.0.0.0
Feb 08, 2010 10:57:28 > Next server IP address: 10.29.2.1
Feb 08, 2010 10:57:28 > Gateway IP address: 0.0.0.0
Feb 08, 2010 10:57:28 > Client hardware address: Feb 08, 2010 10:57:28 > 6c Feb 08, 2010 10:57:28 > f0 Feb 08, 2010 10:57:28 > 49 Feb 08, 20
Feb 08, 2010 10:57:28 > 00 Feb 08, 2010 10:57:28 > 00 Feb 08, 2010 10:57:28 > 00 Feb 08, 2010 10:57:28 > 00 Feb 08,
Feb 08, 2010 10:57:28 > Server host name: Novell Proxy DHCP Server
Feb 08, 2010 10:57:28 > Boot file name: nvlnbp.sys
Feb 08, 2010 10:57:28 > Option magic cookie: 0x63825363Feb 08, 2010 10:57:28 > valid
Feb 08, 2010 10:57:28 > Options:
Feb 08, 2010 10:57:28 > option 53 (len = 1): Message typeFeb 08, 2010 10:57:28 > Feb 08, 2010 10:57:28 > DHCPACK
Feb 08, 2010 10:57:28 > option 54 (len = 4): Server IDFeb 08, 2010 10:57:28 > 10.29.2.1
Feb 08, 2010 10:57:28 > option 0 (len = 0): PadFeb 08, 2010 10:57:28 >
Feb 08, 2010 10:57:28 > option 0 (len = 0): PadFeb 08, 2010 10:57:28 >
abou 60 lines
Feb 08, 2010 10:57:28 > option 0 (len = 0): PadFeb 08, 2010 10:57:28 >
vogl,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
Hierarchy on HANA Calculation View with Optional Input Parameters Fails
Hi,
Has anyone succeeded in building a hierarchy on top of a calculation view with optional input parameters, where an input parameter is not filled?
The original requirement came from the wish to create a parent child hierarchy on a calculation view that was copied into the customer space from a HANA Live Financial Statement query view, but I have found the following when creating a simple level hierarchy on a calculation view that consumes one table. The Calculation View has one Input Parameter where the 'mandatory' box is unchecked.
Calculation view reads ECC table FAGLFLEXT
Simple level based hierarchy on fields PRCTR, RACCT and SEGMENT
Input parameter is used as a filter for PRCTR with logic ("EMPTY" = '$$P_PROFITCTR$$' or "PRCTR" = '$$P_PROFITCTR$$')
When I run the view I see the following behaviour in HANA Studio and Analysis for Excel
Before building the hierarchy I could run the view with or without the Input Parameter
After building the hierarchy I can run the view with the Input Parameter filled, but it fails when the Input Parameter is not filled.
Error message is "error: search table error: [2426] missing placeholder; missing value for mandatory parameter P_PROFITCTR"
P_PROFITCTR is not a mandatory parameter, but the selection for the hierarchy view thinks it should be. I don't find any notes around this issue, so I don't think it's version related, however the version I have used for this test is 1.00.70.
It's a shame we can't currently build the hierarchy as the parent child relationship is provided in HANA Live view NewGLFinancialStatementQuery.
Thanks,
KenHi Ken,
We have been facing similar issue. We have even tried to set default value and as optional parameter. View still fails to create hierarchy (we are not using HANA live). As mentioned on page 97 of HANA modelling guide input parameter is mandatory from engine point of view. Hierarchy is generated as column view during the initial activation of calculation view and therefore expect a value by caller.
This seems to be a product error. Some one from HANA development team should explain this issue in detail. I would expect someone like Thomas Jung reply to us.
At the moment, we cant use input parameter for date prompt which gives us calendar popup feature for date selection. Hierarchies just don't work with input parameter. We are missing something.
Regards
Angad -
"Connect as..." option in Finder fails using "Apple ID"
Hi,
I've got a problem that's been bugging me for a very long time and I'm stumped as to what might be the issue.
Both my Desktop and Laptop are logged in to iCloud with the same Apple ID, both are running the most recent version of Yosemite, and both are on my home WiFi network managed by a Time Capsule with UPnP turned on.
When I open a Finder window on the Laptop, choose the Desktop in the side bar under Shared and choose "Connect As...", then select "Using an Apple ID", the dialog box shakes "No". I had Console running while this happens, and it spits out the following three lines:
4/1/15 9:34:30.852 PM NetAuthSysAgent[586]: NAHSelectionAcquireCredential complete: iakerb 2CD016C0-813B-3FAC-6A18-1F76D38D083E - [email protected]: GSSCred: 0x7fa239c38d70 <MC: iakerb com.apple.idms.appleid.prd.6179422f71707949426b776f666f6561707437396d773d3d@WEL LKNOWN:COM.APPLE.LKDC>
4/1/15 9:34:30.978 PM NetAuthSysAgent[586]: major error <1> Miscellaneous failure (see text)
4/1/15 9:34:30.983 PM NetAuthSysAgent[586]: ERROR: AFP_OpenSession - Login failed with 80
Doing the same thing the other way around, connecting to my Laptop from the Desktop, everything connects right away, so it's clearly something wrong with the Laptop, though I'm stumped as to what it is.
thanks!
dennis
Message was edited by: .dennis Removed some personal informationEvery time I've posted a question, I try to be as thorough as possible to make sure I'm not wasting someone else's time by giving me information that either I've tried or takes me down a path to a solution tangental to my actual problem.
Every time, I fail.
Yes, I have tried logging in with a user account instead of the Apple ID. Yes, it does work. Thank you for your suggestion, but my ability to log in at all is not the issue.
If you've got any other suggestions to help me with my Apple ID not working, I'm happy to try them out.
thanks!
dennis -
Purchased 14 Jimmy Buffett songs from "Fin City" and four will not play. All remedies suggested on Apple Support have failed.
If only some of the tracks from the album are throwing authorisation errors at you, that suggests that the tracks are damaged.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the tracks and try redownloading fresh copies:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
Hi,
When I tried to install iTunes update this failed, then tried to uninstall and reinstall itunes twice. Failed again. Could not open iTunes. I use an HP PC. Even tried to disable Macafee firewall, still itunes failed to install. Please help!!Followed these instructions with a few changes. (Windows 7 x64)
Uninstalled programs in the following order:
- Itunes
- Apple Application Support
- Apple Software Update
- Bonjour
- Apple Mobile Device Support (uninstall failed due to Apple Mobile Device failure)***
- Restarted System
- Redownloaded Itunes from website.
- Run installer as Administratot
- Succefully installed
***To uninstall Apple Mobile Device Support
- Right clicked on Apple Mobile Device Support, Clicked Charge (second option), Repair, Next (failed to repari)
- Right clicked the Apple Mobile Device Support in the Programs and Features window and clicked Repair (third option in drop down list). (repaired successfully)
- Uninstall successful after the repair.
Below is a guess at a quicker solution:
Looking at the uninstalls, it may be worth trying to repair the Apple Mobile Device Support through the Program and Features window before trying to uninstall everything. It may be a faster fix for the freezing service. After the repair is successful the itunes update may work.
Hope this helps. -
HDD stuck in clag, seems to pass tests (or at least, not fail them)
About 12 months ago, my PB had a new HDD installed because of failure to boot with the old one. It ran fine for ~10 months, then a couple of months ago it had an episode of problems, where it ran unbelievably slowly (say 20 mins to get to the login screen, another 5 to got the login prompt, etc). But it would run OK once it had apps in memory. Seemed a very clear HDD problem again. But at that time, I had some time critical stuff to do, so I hacked my way through it as I couldn't afford the five days repairs take here. After about three days, it suddenly recovered (in the meantime, we had bought a new MacBook as backup - my wife's using it now). When I finally got to the point where I could afford to risk a full failure, and ran techtools pro on it, nothing showed - esp., no recorded SMART errors. So I decided to wait till the end of term before I took it off to the repairers. Well, that's Thursday. But in the meantime, the gremlins have reappeared. It's pretty clearly disk-related - and pretty clearly low level, because when I do an <option> reboot, it takes forever to bring up the icon of the built-in HD. However it seems a little strange, because sometimes when I do an <option> reboot, it fails to find the attached firewire drives - but when I start it again, it finds them. So that makes it look like something might be injecting noise onto the bus - except that, when I do manage to boot from one or other of the firewire drives, it runs beautifully, at normal speed.
Of course, I have also tried to check it with techtools pro. But it shows no errors - though it did hang once in the middle of the disk controller test (but stopping it and re-running it gave a green light). However I had to abort the surface scan, it clearly wasn't going to finish within my lifetime.
What happens when it starts to give problems, is I can hear it doing endlessly repeated seeks, but it eventually seems to get to read the block and goes on to the next. Then every now and then it will give a faint (and I do mean faint) squeak. It actually sounds more mechanical than electronic, though hard to be sure. So presumably something is detecting that there was some sort of hardware error. So why don't I see hard controller errors, seek errors or SMART errors in the techtools logs? Any ideas what could be the problem?
I should add that the machine has about two months of its applecare warranty left. If possible, I don't want to get (say) the HDD replaced, only to find one week after the end of warranty that it was really a motherboard problem and I'm left with a pretty paperweight... Any help in getting the right diagnosis on this would be greatly appreciated.Well the local apple guys were very fast, my wife picked the machine up Wednesday morning, though I was a bit suspicious - I got her to boot it while I talked her through it on the phone, while she was still in the shop. It booted, but veeerrry slowly. The shop guys claimed it was normal.... When it came home and I tried to re-install my backups, it failed with hard errors. I then ran techtools on the new disk, this time it showed hard read/write/seek errors (I probably should have checked whether it was really a new drive, or whether they just reformatted). Anyway, with the printouts from techtools, there wasn't any argument about replacing the disk this time (and it's definitely new - hitachi rather than toshiba). This time, reinstallation wasn't too bad, and I'm writing this from the machine now. It still seems a little slow, but maybe that's because in the interim I've been using my wife's macbook...
Thanks for all your help. I still don't understand why none of this showed up in SMART status, but I guess I don't know enough about that. -
Configuration Mail Store Failed
Could someone help me ?
This is my log :
Using paramFile: D:\OCS_ONEBOX\mtier\oes\config\Disk1\install\win32\oraparam.ini
Checking requirements...
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.
Actual 5.0 Passed
Checking monitor: must be configured to display at least 256 colors.
Actual 4294967296 Passed
Checking if CPU speed is above 300 MHz.
Actual 2405MHz Passed
All requirements met.
Environment Variables:
ORACLE_HOME =
PATH = C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;Z:.;Y:.;
CLASSPATH = D:\OCS_ONEBOX\mtier\jlib\ldapjclnt9.jar;D:\OCS_ONEBOX\mtier\jlib\repository.jar;D:\OCS_ONEBOX\mtier\jlib\esinstall.jar;D:\OCS_ONEBOX\mtier\jlib\esldap.jar;D:\OCS_ONEBOX\mtier\jlib\providerutil.jar;D:\OCS_ONEBOX\mtier\jlib\ldap.jar;D:\OCS_ONEBOX\mtier\jlib\jndi.jar;
Username:Administrator
This installation is being performed using response file D:/OCS_ONEBOX/mtier/oes/config/Disk1/stage/Response/oracle.um.UM_Config.Typical1.rsp.
Oracle Universal Installer version is 2.3.0.8.0
This installation is being performed using response file D:/OCS_ONEBOX/mtier/oes/config/Disk1/stage/Response/oracle.um.UM_Config.Typical1.rsp.
Setting variable 'FROM_LOCATION' to 'D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\products.jar'. Received the value from response file.
Setting variable 'ORACLE_HOME' to 'D:\OCS_ONEBOX\mtier'. Received the value from response file.
Setting variable 'TOPLEVEL_COMPONENT' to 'oracle.um.UM_Config,9.0.4.1.0,'. Received the value from response file.
Setting variable 'SHOW_SPLASH_SCREEN' to 'false'. Received the value from response file.
Setting variable 'SHOW_WELCOME_PAGE' to 'false'. Received the value from response file.
Setting variable 'SHOW_CUSTOM_TREE_PAGE' to 'false'. Received the value from response file.
Setting variable 'SHOW_COMPONENT_LOCATIONS_PAGE' to 'false'. Received the value from response file.
Setting variable 'SHOW_SUMMARY_PAGE' to 'false'. Received the value from response file.
Setting variable 'SHOW_INSTALL_PROGRESS_PAGE' to 'false'. Received the value from response file.
Setting variable 'SHOW_REQUIRED_CONFIG_TOOL_PAGE' to 'true'. Received the value from response file.
Setting variable 'SHOW_CONFIG_TOOL_PAGE' to 'true'. Received the value from response file.
Setting variable 'SHOW_RELEASE_NOTES' to 'true'. Received the value from response file.
Setting variable 'SHOW_ROOTSH_CONFIRMATION' to 'true'. Received the value from response file.
Setting variable 'SHOW_END_SESSION_PAGE' to 'true'. Received the value from response file.
Setting variable 'SHOW_EXIT_CONFIRMATION' to 'true'. Received the value from response file.
Setting variable 'NEXT_SESSION' to 'true'. Received the value from response file.
Setting variable 'NEXT_SESSION_ON_FAIL' to 'true'. Received the value from response file.
Setting variable 'NEXT_SESSION_RESPONSE' to 'D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\Response\oracle.um.UM_Config.Typical1.rsp'. Received the value from response file.
Setting variable 'DEINSTALL_LIST' to 'oracle.um.UM_Config,9.0.4.1.0,'. Received the value from response file.
Setting variable 'SHOW_DEINSTALL_CONFIRMATION' to 'true'. Received the value from response file.
Setting variable 'SHOW_DEINSTALL_PROGRESS' to 'true'. Received the value from response file.
Setting variable 'ACCEPT_LICENSE_AGREEMENT' to 'true'. Received the value from response file.
*** Welcome Page***
Initializing install inventory
Setting up install inventory
*** Specify File Locations Page***
Setting the 'SourceLocation ( FROM_LOCATION )' property to 'D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\products.jar'. Received the value from response file.
Setting the 'OracleHome ( ORACLE_HOME )' property to 'D:\OCS_ONEBOX\mtier'. Received the value from response file.
Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OCSHome_mid'. Received the value from the default settings.
Initializing OUI access setup
Setting variable 'ORACLE_HOME' to 'D:\OCS_ONEBOX\mtier'. Received the value from response file.
Performing operation for OUI access setup
Setting variable 'CLUSTER_NODES' to ''. Received the value from a code block.
*** Select a Product to Install Page***
Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.um.UM_Config, 9.0.4.1.0, >0.0.0.0.0, [ 912 ][OH:2]'. Received the value from the default settings.
*** Select Installation Type Page***
Setting the 'InstallType ( DEP_MODE )' property to 'Typical'. Received the value from the default settings.
Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Typical,'. Received the value from the default settings.
The selected install type is "typical".
Install type for "UM configurator 9.0.4.1.0 " is "typical".
*** Language Selection Page***
*** Specify Local Host Name Page***
Setting the 'HostName ( OUI_HOSTNAME )' property to 'oramail.exp.com'. S_LOG_VAR_VALTYPE_CLONE
*** Component Locations Page***
*** Entering Component: oracle.um.UM_Config installation
Setting variable 'system_passwd' to '*Protected value, not to be logged*'. Received the value from response file.
Setting variable 'sys_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'summary_str' to 'summary'. Received the value from the variable calculation.
Setting variable 'start_proc_flag' to 'true'. Received the value from the variable calculation.
Setting variable 'start_proc' to '1'. Received the value from the variable calculation.
Setting variable 'port_number' to '389'. Received the value from the variable calculation.
Setting variable 'out_str4' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'out_str31' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'out_str3' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'oid_flag' to '1'. Received the value from the variable calculation.
Setting variable 'link_htdocs' to 'cal90jsp'. Received the value from the variable calculation.
Setting variable 'isportinuse_flag' to 'true'. Received the value from the variable calculation.
Setting variable 'install_cal' to 'false'. Received the value from the variable calculation.
Setting variable 'host_name' to 'host_name'. Received the value from the variable calculation.
Setting variable 'global_db_name_list' to ''. Received the value from the variable calculation.
Setting variable 'global_db_name' to '<SID>.<Domain Name>'. Received the value from the variable calculation.
Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'domain_name' to 'oracle.com'. Received the value from the variable calculation.
Setting variable 'ctxsys_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'create_domain_flag' to 'false'. Received the value from the variable calculation.
Setting variable 'cookie_domain' to '.oracle.com'. Received the value from the variable calculation.
Setting variable 'connect_str' to 'connect_str'. Received the value from the variable calculation.
Setting variable 'config_type' to '0'. Received the value from the variable calculation.
Setting variable 'config4' to 'false'. Received the value from the variable calculation.
Setting variable 'config3' to 'false'. Received the value from the variable calculation.
Setting variable 'config2' to 'false'. Received the value from the variable calculation.
Setting variable 'config1' to 'false'. Received the value from the variable calculation.
Setting variable 'cal_umadmin_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'cal_dad_name' to 'cal_dad_name'. Received the value from the variable calculation.
Setting variable 'b_configureUM' to 'true'. Received the value from the variable calculation.
Setting variable 'app_svr_port' to 'app_svr_port'. Received the value from the variable calculation.
Setting variable 'app_svr_host_name' to 'app_svr_host_name'. Received the value from the variable calculation.
Calling Query WindowsGeneralQueries2.3.0.6.0 getWindowsSystemDirectory
Query Returned: C:\WINNT\system32
Setting variable 'SystemRoot' to 'C:\WINNT\system32'. Received the value from the variable calculation.
Setting variable 'SID' to 'iasdb'. Received the value from the variable calculation.
Setting variable 'ORAHOME' to ''. Received the value from the variable calculation.
Setting variable 'Net9_Connect_String' to 'ora9i'. Received the value from the variable calculation.
Setting variable 'Index_Tblspace' to 'escalindxtbl'. Received the value from the variable calculation.
Setting variable 'Img_Prefix' to '/i/'. Received the value from the variable calculation.
Setting variable 'INSTALLHOME' to ''. Received the value from the variable calculation.
Setting variable 'INSTALLATION_NAME' to ''. Received the value from the variable calculation.
Setting variable 'HOSTNAME' to ''. Received the value from the variable calculation.
Setting variable 'Flow_User_Passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'Flow_User' to 'es_cal'. Received the value from the variable calculation.
Setting variable 'Def_Tblspace' to 'escaldeftbl'. Received the value from the variable calculation.
Setting variable 'App_User_Passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'App_User' to 'es_cal'. Received the value from the variable calculation.
Setting variable 'umadmin_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
Setting variable 'out_str22' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
Setting variable 'es_mail_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
Setting variable 'out_str2' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'out_str24' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
Setting variable 'global_db_name_list' to '<SID>.<Domain Name>,'. Received the value from a code block.
*** Unified Messaging Configuration Page***
Setting the 'TitleLabel' property to 'Unified Messaging Configuration'.
Setting the 'SubTitleLabel' property to ''.
Setting the 'Prompt' property to 'Select one of the following options :'.
Setting the 'Choices' property to 'Mail Store Database Configuration -
Installs the mail store schema into a dedicated tablespace in a previously installed
Oracle 9i database.,Middle Tier Configuration -
Configures the Unified Messaging protocol servers on this host: SMTP, IMAP4, POP3
and House Keeper.,'.
Setting the 'BottomDescLabel' property to ''.
Setting the 'Descriptions' property to 'null'.
Setting the 'SelectedIndex ( config_type )' property to '0'. Received the value from the UI page.
Setting variable 'INSTALLATION_NAME' to 'UM_SYSTEM'. Received the value from a code block.
Setting variable 'config1' to 'false'. Received the value from a code block.
Setting variable 'config2' to 'false'. Received the value from a code block.
Setting variable 'config3' to 'false'. Received the value from a code block.
Setting variable 'config4' to 'false'. Received the value from a code block.
Setting variable 'install_cal' to 'false'. Received the value from a code block.
Setting variable 'oid_flag' to '0'. Received the value from a code block.
Setting variable 'system_passwd' to '*Protected value, not to be logged*'. Received the value from a code block.
*** Mail Store Database Configuration Page***
Calling Query generalQueries2.3.0.6.0 getOS
Query Returned: Windows 2000
Calling Query SpawnQueries1.1.4 Spawn
command = Protected value, not to be logged
Query Returned: 0
Error:*** Alert: System password is invalid, please reenter. ***
User Selected: Yes/OK
Calling Query generalQueries2.3.0.6.0 getOS
Query Returned: Windows 2000
Calling Query SpawnQueries1.1.4 Spawn
command = Protected value, not to be logged
Query Returned: 0
Error:*** Alert: System password is invalid, please reenter. ***
User Selected: Yes/OK
Calling Query generalQueries2.3.0.6.0 getOS
Query Returned: Windows 2000
Calling Query SpawnQueries1.1.4 Spawn
command = Protected value, not to be logged
Query Returned: 0
Error:*** Alert: System password is invalid, please reenter. ***
User Selected: Yes/OK
Calling Query generalQueries2.3.0.6.0 getOS
Query Returned: Windows 2000
Calling Query SpawnQueries1.1.4 Spawn
command = Protected value, not to be logged
Query Returned: 0
Error:*** Alert: System password is invalid, please reenter. ***
User Selected: Yes/OK
Calling Query generalQueries2.3.0.6.0 getOS
Query Returned: Windows 2000
Calling Query SpawnQueries1.1.4 Spawn
command = Protected value, not to be logged
Query Returned: 0
Error:*** Alert: System password is invalid, please reenter. ***
User Selected: Yes/OK
Calling Query generalQueries2.3.0.6.0 getOS
Query Returned: Windows 2000
Calling Query SpawnQueries1.1.4 Spawn
command = Protected value, not to be logged
Query Returned: 2
Setting the 'TitleLabel' property to 'Mail Store Database Configuration'.
Setting the 'SubTitleLabel' property to ''.
Setting the 'Prompt' property to 'Enter the values for the service name connect string and system password of this mail store database. These values are used by the Universal Installer to install the mail store schema.'.
Setting the 'Labels' property to 'Database Host Name,SID,Port Number,System Password,'.
Setting the 'Types' property to 'TEXTFIELD,TEXTFIELD,TEXTFIELD,SECURE,'.
Setting the 'Choices' property to ''.
Setting the 'BottomDescLabel' property to 'null'.
Setting the 'Selections ( out_str2 )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
Calling Query generalQueries2.3.0.6.0 getOS
Query Returned: Windows 2000
Calling Query SpawnQueries1.1.4 Spawn
command = Protected value, not to be logged
Query Returned: 2
*** CTXSYS Password Page***
Calling Query generalQueries2.3.0.6.0 getOS
Query Returned: Windows 2000
Calling Query SpawnQueries1.1.4 Spawn
command = Protected value, not to be logged
Query Returned: 0
Error:*** Alert: Ctxsys password is invalid, please reenter. ***
User Selected: Yes/OK
Calling Query generalQueries2.3.0.6.0 getOS
Query Returned: Windows 2000
Calling Query SpawnQueries1.1.4 Spawn
command = Protected value, not to be logged
Query Returned: 0
Error:*** Alert: Ctxsys password is invalid, please reenter. ***
User Selected: Yes/OK
Calling Query generalQueries2.3.0.6.0 getOS
Query Returned: Windows 2000
Calling Query SpawnQueries1.1.4 Spawn
command = Protected value, not to be logged
Query Returned: 1
Setting the 'TitleLabel' property to 'CTXSYS Password'.
Setting the 'SubTitleLabel' property to ''.
Setting the 'Prompt' property to 'This is the password for the ctxsys schema.'.
Setting the 'Labels' property to 'Enter Password:,'.
Setting the 'Types' property to 'SECURE,'.
Setting the 'Choices' property to ''.
Setting the 'BottomDescLabel' property to 'null'.
Setting the 'Selections ( out_str24 )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
Setting variable 'ctxsys_passwd' to '*Protected value, not to be logged*'. Received the value from a code block.
Setting variable 'host_name' to 'ormail'. Received the value from a code block.
Setting variable 'SID' to 'ocsstore'. Received the value from a code block.
Setting variable 'port_number' to '1521'. Received the value from a code block.
Setting variable 'connect_str' to '''. Received the value from a code block.
Setting variable 'connect_str' to '"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))"'. Received the value from a code block.
Setting variable 'system_passwd' to '*Protected value, not to be logged*'. Received the value from a code block.
Setting variable 'ORAHOME' to 'D:\OCS_ONEBOX\mtier'. Received the value from a code block.
Setting variable 'config2' to 'true'. Received the value from a code block.
Setting variable 'summary_str' to 'Click 'Next' to install and configure Unified Messaging mail store , click 'Previous' to go back to the previous page .'. Received the value from a code block.
*** ES_MAIL Password Page***
Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
Setting the 'TitleLabel' property to 'ES_MAIL Password'.
Setting the 'SubTitleLabel' property to ''.
Setting the 'Prompt' property to 'This is the password for the e-mail server schema.'.
Setting the 'PasswordLabel' property to 'Enter Password:'.
Setting the 'ConfirmLabel' property to 'Confirm Password:'.
Setting the 'BottomDescLabel' property to 'null'.
Setting the 'Password ( es_mail_passwd )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
Calling Query fileQueries2.3.0.6.0 exists
filename = D:\OCS_ONEBOX\mtier/oes/log/exists.txt
Query Returned: false
*** UMADMIN Password Page***
Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
Setting the 'TitleLabel' property to 'UMADMIN Password'.
Setting the 'SubTitleLabel' property to ''.
Setting the 'Prompt' property to 'Enter and confirm the password for the UMADMIN user in the Internet Directory.'.
Setting the 'PasswordLabel' property to 'Enter Password:'.
Setting the 'ConfirmLabel' property to 'Confirm Password:'.
Setting the 'BottomDescLabel' property to 'null'.
Setting the 'Password ( umadmin_passwd )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
Setting variable 'oid_flag' to '1'. Received the value from a code block.
*** Unified Messaging Domain Page***
Setting the 'TitleLabel' property to 'Unified Messaging Domain'.
Setting the 'SubTitleLabel' property to ''.
Setting the 'Prompt' property to 'Enter the name of the new Unified Messaging Domain to be created.'.
Setting the 'TextLabel' property to 'Domain Name'.
Setting the 'BottomDescLabel' property to 'null'.
Setting the 'TextField ( domain_name )' property to 'oramail.exp.com'. Received the value from the UI page.
*** Summary Page***
Setting the 'TitleLabel' property to 'Summary'.
Setting the 'SubTitleLabel' property to ''.
Setting the 'InfoLabel' property to 'Click 'Next' to install and configure Unified Messaging mail store , click 'Previous' to go back to the previous page .'.
Setting variable 'create_domain_flag' to 'true'. Received the value from a code block.
*** Summary Page***
Summary
Global Settings
Source: D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\products.jar
Oracle Home: D:\OCS_ONEBOX\mtier (OCSHome_mid)
Installation Type: typical
Product Languages
English
Space Requirements
C:\ Required 261KB (includes 258KB temporary) : Available 1.94GB
D:\ Required 536KB : Available 15.16GB
New Installations (1 products)
UM configurator 9.0.4.1.0
Starting install Install Phase 1 of component UM configurator
Starting install Install Phase 2 of component UM configurator
Initializing OUI save inventory
Unable to read C:\Program Files\Oracle\Inventory/Contents/LibsList.ser. Some inventory information may be lost.
Current Inventory:
Independent Products:
Oracle Windows System Files Fullmode 9.0.2.0.1 Development
Oracle Windows System Files Installation 9.0.2.0.1 Development
Java Runtime Environment 1.1.8.16.0a
Oracle Windows System Files Verification 9.0.2.0.0 Development
Oracle Home: OUIHome
This Oracle Home has not been changed in this session.
Oracle Home: OCSHome
This Oracle Home has not been changed in this session.
Oracle Home: OCSHome_stg
This Oracle Home has not been changed in this session.
Oracle Home: OCSHome_inf
This Oracle Home has not been changed in this session.
Oracle Home: OCSHome_mid
Oracle Collaboration Suite 9.0.4.1.1
Sun JDK extensions 9.0.2.0.0
Sun JDK extensions Patch 9.0.2.3.0
Sun JDK 1.3.1.0.2a
Java Runtime Environment 1.4.1.3.0a
Java Runtime Environment 1.3.1.6.0a
Installer SDK Component 2.3.0.8.0
Oracle Universal Installer 2.3.0.8.0
RDBMS Required Support Files 9.0.1.4.0
Enterprise Manager Minimal Support Files 9.0.2.0.1
Collaboration Suite Wireless Server Management 9.0.3.2.0
Perl Interpreter 5.6.1.0.0a
Advanced Queueing (AQ) API 9.0.1.4.0
XML Parser for Java 9.0.2.0.0
Oracle Dynamic Monitoring Service 9.0.2.0.1
Oracle Dynamic Monitoring Service Patch 9.0.2.3.0
regexp 2.0.21.0.0
Bali Share 1.1.17.0.0
Oracle9i Application Server Object in OID 9.0.2.0.0
Oracle9iAS Application Server WebCache Core to non-Core Upgrade 9.0.2.0.0
Oracle JDBC Development Drivers 9.0.1.4.0
JDBC Common Files 9.0.1.4.0
JDBC/OCI Common Files 9.0.1.4.0
Oracle Trace Required Support Files 9.0.1.0.1
Oracle Client Required Support Files 9.0.1.4.0
Agent Required Support Files 9.0.2.0.0a
SSL Required Support Files 9.0.1.4.0
LDAP Required Support Files 9.0.2.1.0
LDAP Required Support Files Patch 9.0.2.3.0
Parser Generator Required Support Files 9.0.1.0.0
PL/SQL Required Support Files 9.0.1.4.0
Oracle9iAS Application Server Core to non-Core Upgrade 9.0.2.0.0
Repository Config Assistant 9.0.2.0.0
XML Class Generator for Java 9.0.2.0.0
Oracle JDBC Thin Driver for JDK 1.1 9.0.1.4.0
Oracle Extended Windowing Toolkit 3.4.12.0.0
Oracle Ice Browser 5.06.8.0.0
Oracle Collaboration Suite Quick Tutorial 9.0.4.1.1
Java Authorization 9.0.2.0.1
Java Authorization Patch 9.0.2.3.0
Enterprise Login Assistant 9.0.2.0.1
Oracle JFC Extended Windowing Toolkit 4.2.6.0.0
Oracle 9iAS Single Sign On Registration 9.0.2.0.1
Oracle Ultra Search Common Files 9.0.3.4.0
Oracle JDBC Thin Driver for JDK 1.2 9.0.1.4.0
XML Parser for PL/SQL 9.0.2.0.0
Platform Required Support Files 9.0.1.4.0
Oracle Core Required Support Files 9.0.1.4.0
Oracle Help For Java 3.2.12.0.0
Extended Windowing Toolkit 3.3.18.0.0
Oracle interMedia Java Advanced Imaging 9.0.2.0.0
Oracle Help For Java 4.1.12.0.0
Oracle interMedia Java Media Framework Client 9.0.2.0.0
Oracle9i Globalization Support 9.0.1.4.0
Oracle interMedia Java Client 9.0.2.0.0
Oracle XML SQL Utility 9.0.1.4.0
Oracle Net Required Support Files 9.0.1.4.0
Precompiler Required Support Files 9.0.1.4.0
XML Class Generator for C++ 9.0.2.0.0
Oracle Code Editor 1.2.1.0.0A
XDK Required Support Files 9.0.2.0.0
XML Parser for C 9.0.2.0.0
Java Naming and Directory Interface Libraries 1.2.1.0.0
Oracle Dynamic Services Core 9.0.2.0.1
Oracle Internet Directory Tools 9.0.2.1.0
Required Support Files 9.0.1.4.0
UM common 9.0.4.1.0
Utilities Common Files 9.0.1.4.0
Oracle JDBC/OCI Driver for JDK 1.2 9.0.1.4.0
Oracle Internet Directory Client Common Files 9.0.2.1.0
Oracle Database User Interface 2.2.11.0.0
Oracle Ultra Search Middle-Tier 9.0.3.4.0
Assistant Common Files 9.0.2.0.1
XML Parser for C++ 9.0.2.0.0
Oracle Intelligent Agent Base Component Files 9.0.2.0.0a
Oracle Intelligent Agent 9.0.2.0.0a
Oracle Property Inspector 4.1.8.0.0
Oracle EMD Agent Extensions 9.0.2.0.0a
Oracle Forms Extensions 9.0.2.0.0a
Database SQL Scripts 9.0.1.4.0
Oracle Applications Extensions 9.0.2.0.0a
Oracle Collaboration Suite Release Notes 9.0.4.1.1
Oracle Portal Data 9.0.2.2.22
Oracle Net Configuration Assistant 9.0.1.4.0
Enterprise Manager Translated Files 9.0.2.0.1
Enterprise Manager Base Classes 9.0.2.0.1
Oracle HTTP Server Extensions 9.0.2.0.0a
Oracle Net Manager 9.0.1.4.0
Oracle Java Portal Development Kit 9.0.2.2.22
Oracle Portal Community Portlets 9.0.2.2.22
Oracle9iAS Repository API 9.0.2.1.0
Oracle JDBC/OCI Driver for JDK 1.1 9.0.1.4.0
Oracle Java Object Cache 9.0.2.0.0
Oracle Java Object Cache Patch 9.0.2.3.0
Oracle Process Management Notification 9.0.2.0.0
Oracle Process Management Notification Patch 9.0.2.3.0
Visigenics ORB 3.4.0.0.0
Oracle Enterprise Java Beans and CORBA Tools 9.0.1.1.1
Oracle Dynamic Services Server 9.0.2.0.1
Apache Configuration for EJB 9.0.1.0.1
HTTP Server files 1.3.22.0.1a
HTTP Server Files Patch 1.3.22.0.1d
Oracle OC4J Module 9.0.2.0.0
Oracle OC4J Module Patch 9.0.2.3.0
Oracle Ultra Search Server 9.0.3.4.0
Oracle Wallet Manager 9.0.1.4.0
Oracle Net 9.0.1.4.0
Oracle Java Tools 9.0.1.4.0
Secure Socket Layer 9.0.1.4.0
Oracle9iAS Clickstream Intelligence Common 9.0.2.2.0
Enterprise Manager Process Utility 9.0.2.0.0
Oracle9i Syndication Server Core 9.0.2.0.1
Oracle Distributed Configuration Management 9.0.2.0.0
Oracle Distributed Configuration Management Patch 9.0.2.3.0
Enterprise Manager Encapsulated J2EE 9.0.2.0.0
Bali Resource Translation System 2.0.5.0.0
Oracle9i Syndication Server 9.0.2.0.1
Oracle JDBC Drivers 9.0.1.4.0
Oracle9iAS Mapviewer 9.0.2.0.0
XSQL Servlet 9.0.2.0.0
SQLJ Runtime 9.0.2.0.0
Oracle Java Server Pages 9.0.2.0.1
Oracle Java Server Pages Patch 9.0.2.3.0
Oracle9iAS Containers for J2EE 9.0.2.0.1
Oracle9iAS Containers for J2EE Patch 9.0.2.3.0
Oracle Display Fonts 9.0.2.0.0
Oracle UIX 2.0.21.0.0
Oracle SOAP Client files 2.2.0.0.0b
Oracle SOAP Client Files Patch 2.2.0.0.0e
Oracle Help for the Web 1.0.7.0.0
Oracle Enterprise Manager Web Site 9.0.2.0.0
Unified Messaging EMD configuration 9.0.4.1.0
Oracle9iAS Clickstream Intelligence Collector Agent Management 9.0.2.2.0
BC4J Runtime Sample for Oracle9iAS 9.0.2.799.0
Oracle Ultra Search Extension for EMD 9.0.3.4.0
JSDK 2.0.0.0.0d
Apache JServ 1.1.2.0.0a
Apache JServ Patch 1.1.2.0.0d
Discoverer Services Manager 9.0.2.39.02
Oracle9i Delegated Administration Service 9.0.2.1.0
Oracle9i Delegated Administration Service Patch 9.0.2.3.0
Export/Import 9.0.1.4.0
SQL*Loader 9.0.1.4.0
Oracle SOAP Server 2.2.0.0.0b
Oracle SOAP Server Patch 2.2.0.0.0e
Oracle eBusiness Management Extensions 9.0.2.0.0a
Apache Module for Oracle Distributed Authoring and Versioning 9.0.2.0.0
SQL*Plus 9.0.1.4.0
XML Transviewer Beans 9.0.2.0.0
Reports OEM Extension 9.0.2.0.3
Forms EMEXT 9.0.2.9.0
Apache Configuration for Oracle Java Server Pages 9.0.2.0.0
BC4J Runtime for Oracle9iAS 9.0.2.799.0
Oracle9iAS Configuration for OC4J 9.0.2.0.1
Oracle XML Runtime Components 9.0.2.0.0
Oracle Mod PL/SQL Gateway 9.0.2.0.0
Patch of Oracle Mod PL/SQL Gateway 9.0.2.6.0
Oracle9iAS Web Cache 9.0.2.0.0
Oracle9iAS Web Cache Patch 9.0.2.3.0
Oracle Agent Extensions 9.0.2.0.0a
Oracle Internet Directory Client 9.0.2.1.0
Oracle Internet Directory Client Patch 9.0.2.3.0
Apache Configuration for Oracle XML Developer's Kit 9.0.2.0.0
Oracle Net Listener 9.0.1.4.0
Oracle Portal Help 9.0.2.2.22
Oracle Portal Integration with Reports 9.0.2.2.22
Oracle Portal Configuration Assistant 9.0.2.2.22
Oracle Portal CAT 9.0.2.2.22
Oracle Portal Images 9.0.2.2.22
Oracle Portal NLS 9.0.2.2.22
Oracle Portal Common Services 9.0.2.2.22
Oracle Portal Sitebuilder 9.0.2.2.22
Oracle Portal Demos 9.0.2.2.22
Oracle Portal Documentation 9.0.2.2.22
Oracle Portal Java 9.0.2.2.22
Oracle Portal SSO 9.0.2.2.22
Oracle Portal Servlets 9.0.2.2.22
Oracle Portal PLSQLToolkit 9.0.2.2.22
Oracle Portal Utilities 9.0.2.2.22
Oracle Portal VPD Policy 9.0.2.2.22
Oracle9iAS Clickstream Intelligence Collector Agent 9.0.2.2.0
Oracle9iAS Clickstream Intelligence Core 9.0.2.2.0
Voicemail Fax Middletier 9.0.4.1.1
BC4J Config Assistant 9.0.2.799.0
Email Server Webmail 9.0.4.1.0
Unified Messaging 9.0.4.1.0
Oracle HTTP Server 9.0.2.0.0
Oracle Portal Config Dialogs 9.0.2.2.22
Oracle9i Application Server Core Products 9.0.2.0.0
Oracle9i Application Server Middle Tier Products 9.0.2.0.0
Oracle Portal Monitoring 9.0.2.2.22
Oracle Portal Database Objects 9.0.2.2.22
Oracle9i Application Server Instance 9.0.2.0.0
Oracle Portal 9.0.2.2.22
Patch of Oracle Portal 9.0.2.3.0B
Management Tools 9.0.2.0.0
Oracle Workflow 2.6.2.0.0
Oracle Collaboration Suite One-offs 9.0.4.1.1
Collaboration Suite Wireless Server 9.0.3.2.0
Oracle Calendar application system 9.0.4.1.1
Oracle Calendar web services 9.0.4.1.1
Oracle Calendar SDK 9.0.4.1.0
Oracle Sync Server 9.0.4.1.1
Oracle Calendar web client 9.0.4.1.1
Collaboration Suite Wireless 9.0.3.2.0
Oracle9i Application Server 9.0.2.0.0
Oracle Collaboration Suite Upgrade Assistant 9.0.4.1.1
Oracle Files 9.0.4.3.0
Oracle Calendar server 9.0.4.1.1
Oracle Calendar administrator 9.0.4.1.1
Oracle Calendar configuration 9.0.4.1.1
Oracle Collaboration Suite Web Client 9.0.4.1.1
Oracle Real-Time Collaboration Core Components 2.0.4.2.0
UM configurator 9.0.4.1.0
Starting to execute configuration assistants
Launched configuration assistant 'Config MailStore'
Tool type is: Optional.
The command being spawned is: 'D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
Start output from spawned process:
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
The system cannot find the path specified.
The system cannot find the path specified.
== was unexpected at this time.
End output from spawned process.
Invalid Exit Code. The following result code will be used for configuration assistants: 1
Configuration assistant "Config MailStore" failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
The system cannot find the path specified.
The system cannot find the path specified.
== was unexpected at this time.
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
User Selected: Yes/OK
Starting to execute configuration assistants
Launched configuration assistant 'Config MailStore'
Tool type is: Optional.
The command being spawned is: 'D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
Start output from spawned process:
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
The system cannot find the path specified.
The system cannot find the path specified.
== was unexpected at this time.
End output from spawned process.
Invalid Exit Code. The following result code will be used for configuration assistants: 1
Configuration assistant "Config MailStore" failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
The system cannot find the path specified.
The system cannot find the path specified.
== was unexpected at this time.
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
Starting to execute configuration assistants
Launched configuration assistant 'Config MailStore'
Tool type is: Optional.
The command being spawned is: 'D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
Start output from spawned process:
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
The system cannot find the path specified.
The system cannot find the path specified.
== was unexpected at this time.
End output from spawned process.
Invalid Exit Code. The following result code will be used for configuration assistants: 1
Configuration assistant "Config MailStore" failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
The system cannot find the path specified.
The system cannot find the path specified.
== was unexpected at this time.
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
Execute file D:\OCS_ONEBOX\mtier\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
echo Config MailStore
D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com
Error:*** Alert: One or more configuration assistants have not completed successfully. However these are optional, so they are not required for the correct configuration of your system. A list of the configuration assistants that need to be run is generated in the log of this session which is located at:
C:\Program Files\Oracle\Inventory\logs\installActions2006-02-02_01-53-52PM.log ***
User Selected: Yes/OK
Warning:*** Alert: Do you really want to exit? ***
User Selected: Yes/OK
The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
*** End of Installation Page***
The installation of UM configurator was successful, but some optional configuration assistants failed or were canceled.Hi Andreas,
I already tried your solution but still got error, this is the log file :
Starting to execute configuration assistants
Launched configuration assistant 'Config MailStore'
Tool type is: Optional.
The command being spawned is: 'D:\ocs_onebox\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore oramail.exp.com 1521 UM_SYSTEM D:\ocs_onebox\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
Start output from spawned process:
C:\TMP>rem --- running install_mailstore.bat
"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\ocs_onebox\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
The system cannot find the path specified.
The system cannot find the path specified.
== was unexpected at this time.
End output from spawned process.
Invalid Exit Code. The following result code will be used for configuration assistants: 1
Configuration assistant "Config MailStore" failed
C:\TMP>rem --- running install_mailstore.bat
"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\ocs_onebox\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
The system cannot find the path specified.
The system cannot find the path specified.
== was unexpected at this time.
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\ocs_onebox\mtier\oui\bin\ouica.bat.
The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
Execute file D:\ocs_onebox\mtier\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
echo Config MailStore
D:\ocs_onebox\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore oramail.exp.com 1521 UM_SYSTEM D:\ocs_onebox\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com
Error:*** Alert: One or more configuration assistants have not completed successfully. However these are optional, so they are not required for the correct configuration of your system. A list of the configuration assistants that need to be run is generated in the log of this session which is located at:
C:\Program Files\Oracle\Inventory\logs\installActions2006-02-07_06-35-23PM.log ***
User Selected: Yes/OK
*** End of Installation Page***
The installation of UM configurator was successful, but some optional configuration assistants failed or were canceled.
Warning:*** Alert: Do you really want to exit? ***
User Selected: Yes/OK
The OUICA command is launched from D:\ocs_onebox\mtier\oui\bin\ouica.bat.
User Exit -
10g installation on linux 4 failed
I trying to install oracle software on linux 4 but installation has been failed please find the below steps
[oracle@sos02 database]$ ./runInstaller -silent -responseFile /u01/g/Ora_grid10g/DB_SOFT/database/response/standard.rsp
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-02-01_03-21-55PM. Please wait ...[oracle@sos02 database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
You can find a log of this install session at:
/home/oracle/oraInventory/logs/installActions2011-02-01_03-21-55PM.log
.................................................................................................... 100% Done.
Loading Product Information
................................................................................................................... 100% Done.
Analyzing dependencies
Starting execution of Prerequisites...
Total No of checks: 11
Performing check for CertifiedVersions
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
Actual Result: redhat-4
Check complete. The overall result of this check is: Passed
Check complete: Passed
=======================================================================
Performing check for Packages
Checking operating system package requirements ...
Checking for make-3.79; found make-1:3.80-6.EL4. Passed
Checking for binutils-2.14; found binutils-2.15.92.0.2-21. Passed
Checking for gcc-3.2; found gcc-3.4.6-3. Passed
Checking for libaio-0.3.96; found libaio-0.3.105-2. Passed
Check complete. The overall result of this check is: Passed
Check complete: Passed
=======================================================================
Performing check for Kernel
Checking kernel parameters
Checking for semmsl=250; found semmsl=256. Passed
Checking for semmns=32000; found semmns=32000. Passed
Checking for semopm=100; found semopm=100. Passed
Checking for semmni=128; found semmni=142. Passed
Checking for shmmax=536870912; found shmmax=4294967295. Passed
Checking for shmmni=4096; found shmmni=4096. Passed
Checking for shmall=2097152; found shmall=2097152. Passed
Checking for file-max=65536; found file-max=16025260. Passed
Checking for VERSION=2.6.9; found VERSION=2.6.9-42.ELsmp. Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=9000 - 65500. Failed <<<<
Checking for rmem_default=262144; found rmem_default=262144. Passed
Checking for rmem_max=262144; found rmem_max=4194304. Passed
Checking for wmem_default=262144; found wmem_default=262144. Passed
Checking for wmem_max=262144; found wmem_max=1048576. Passed
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to update the kernel parameters.
=======================================================================
Performing check for GLIBC
Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.4-2.25
Check complete. The overall result of this check is: Passed
Check complete: Passed
=======================================================================
Performing check for TotalMemory
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 16236MB
Check complete. The overall result of this check is: Passed
Check complete: Passed
=======================================================================
Performing check for SwapSpace
Checking available swap space requirements ...
Expected result: 12177MB
Actual Result: 16386MB
Check complete. The overall result of this check is: Passed
Check complete: Passed
=======================================================================
Performing check for DetectIfDHCPAssignedIP
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Passed
Check complete: Passed
=======================================================================
Performing check for OracleBase
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
Check complete: Passed
=======================================================================
Performing check for OracleHomeSpace
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
Check complete: Passed
=======================================================================
Performing check for DetectAnyInvalidASMHome
Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
Check complete: Passed
=======================================================================
Performing check for CompatibilityChecks
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
Check complete: Passed
=======================================================================
PrereqChecks complete
.......................................... 100% Done.
Summary
Global Settings
Source: /u01/g/Ora_grid10g/DB_SOFT/database/stage/products.xml
Oracle Home: /u01/app/oracle/10g/db (ORADB10g_HOME)
Installation Type: Standard Edition
Product Languages
English
Space Requirements
/ Required 1.36GB (includes 108MB temporary) : Available 34.19GB
/home/ Required 206KB : Available 34.70GB
New Installations (105 products)
Oracle Database 10g 10.2.0.1.0
Enterprise Edition Options 10.2.0.1.0
Oracle Spatial 10.2.0.1.0
Oracle OLAP 10.2.0.1.0
Oracle Enterprise Manager Console DB 10.2.0.1.0
Oracle Net Services 10.2.0.1.0
Oracle Database 10g 10.2.0.1.0
Oracle Net Listener 10.2.0.1.0
HAS Files for DB 10.2.0.1.0
Oracle Internet Directory Client 10.2.0.1.0
Oracle Call Interface (OCI) 10.2.0.1.0
Oracle Programmer 10.2.0.1.0
Oracle interMedia 10.2.0.1.0
Enterprise Manager Agent Core 10.2.0.1.0
Oracle JVM 10.2.0.1.0
Database Configuration and Upgrade Assistants 10.2.0.1.0
Oracle interMedia Locator 10.2.0.1.0
Oracle XML Development Kit 10.2.0.1.0
Oracle Text 10.2.0.1.0
Oracle Database Utilities 10.2.0.1.0
Generic Connectivity Common Files 10.2.0.1.0
Oracle Advanced Security 10.2.0.1.0
Enterprise Manager Repository Core 10.2.0.1.0
PL/SQL 10.2.0.1.0
Oracle Net 10.2.0.1.0
Assistant Common Files 10.2.0.1.0
Enterprise Manager plugin Common Files 10.2.0.1.0 Beta
Buildtools Common Files 10.2.0.1.0
Installation Common Files 10.2.0.1.0
Oracle LDAP administration 10.2.0.1.0
Oracle Java Client 10.2.0.1.0
Precompiler Common Files 10.2.0.1.0
Oracle Recovery Manager 10.2.0.1.0
SQL*Plus 10.2.0.1.0
iSQL*Plus 10.2.0.1.0
Enterprise Manager plugin Common Files 10.2.0.1.0
HAS Common Files 10.2.0.1.0
Oracle Clusterware RDBMS Files 10.2.0.1.0
Oracle Wallet Manager 10.2.0.1.0
Enterprise Manager Minimal Integration 10.2.0.1.0
Oracle Database User Interface 2.2.13.0.0
Secure Socket Layer 10.2.0.1.0
Oracle ODBC Driver 10.2.0.1.0
Required Support Files 10.2.0.1.0
Database SQL Scripts 10.2.0.1.0
OLAP SQL Scripts 10.2.0.1.0
PL/SQL Embedded Gateway 10.2.0.1.0
Oracle Globalization Support 10.2.0.1.0
Character Set Migration Utility 10.2.0.1.0
LDAP Required Support Files 10.2.0.1.0
Oracle Help for the Web 1.1.10.0.0
Oracle JDBC Thin Driver for JDK 1.4 10.2.0.1.0
Oracle JDBC Thin Driver for JDK 1.2 10.2.0.1.0
Oracle interMedia Client Option 10.2.0.1.0
Oracle Notification Service 10.1.0.3.0
Oracle Code Editor 1.2.1.0.0I
Perl Interpreter 5.8.3.0.2
JDBC Common Files 10.2.0.1.0
Oracle Locale Builder 10.2.0.1.0
Oracle Containers for Java 10.2.0.1.0
Database Workspace Manager 10.2.0.1.0
Oracle Core Required Support Files 10.2.0.1.0
Platform Required Support Files 10.2.0.1.0
Oracle interMedia Locator RDBMS Files 10.2.0.1.0
Oracle JDBC/OCI Instant Client 10.2.0.1.0
Oracle interMedia Annotator 10.2.0.1.0
SQLJ Runtime 10.2.0.1.0
Oracle interMedia Java Advanced Imaging 10.2.0.1.0
Oracle Database 10g interMedia Files 10.2.0.1.0
Oracle Data Mining RDBMS Files 10.2.0.1.0
Enterprise Manager Baseline 10.2.0.1.0
Oracle Help For Java 4.2.6.1.0
Oracle UIX 2.1.22.0.0
XML Parser for Java 10.2.0.1.0
Precompiler Required Support Files 10.2.0.1.0
XML Parser for Oracle JVM 10.2.0.1.0
Oracle Starter Database 10.2.0.1.0
Sample Schema Data 10.2.0.1.0
Parser Generator Required Support Files 10.2.0.1.0
Agent Required Support Files 10.2.0.1.0
Oracle RAC Required Support Files-HAS 10.2.0.1.0
RDBMS Required Support Files 10.2.0.1.0
RDBMS Required Support Files for Instant Client 10.2.0.1.0
Oracle Label Security 10.2.0.1.0
XDK Required Support Files 10.2.0.1.0
Oracle OLAP API 10.2.0.1.0
DBJAVA Required Support Files 10.2.0.1.0
SQL*Plus Required Support Files 10.2.0.1.0
Oracle JFC Extended Windowing Toolkit 4.2.33.0.0
Oracle Ice Browser 5.2.3.6.0
Oracle Display Fonts 9.0.2.0.0
Oracle Extended Windowing Toolkit 3.4.38.0.0
Enterprise Manager Common Files 10.2.0.1.0
Enterprise Manager Agent DB 10.2.0.1.0
Oracle Net Required Support Files 10.2.0.1.0
Enterprise Manager Repository DB 10.2.0.1.0
SSL Required Support Files for InstantClient 10.2.0.1.0
regexp 2.1.9.0.0
Bali Share 1.1.18.0.0
Oracle Universal Installer 10.2.0.1.0
Oracle One-Off Patch Installer 10.2.0.1.0
Installer SDK Component 10.2.0.1.0
Java Runtime Environment 1.4.2.8.0
Sun JDK 1.4.2.0.8
Sun JDK extensions 10.1.2.0.0
Installation in progress (Tue Feb 01 15:22:07 IST 2011)
............................................................... 11% Done.
............................................................... 23% Done.
............................................................... 35% Done.
............................................................... 47% Done.
........................................... 55% Done.
Install successful
Linking in progress (Tue Feb 01 15:23:24 IST 2011)
. 55% Done.
Link successful
Setup in progress (Tue Feb 01 15:23:56 IST 2011)
.................... 100% Done.
Setup successful
End of install phases.(Tue Feb 01 15:24:02 IST 2011)
Starting to execute configuration assistants
Configuration assistant "Oracle Net Configuration Assistant" succeeded
Configuration assistant "Oracle Database Configuration Assistant" failedSEVERE:OUI-10104:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them.
The "/u01/app/oracle/10g/db/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
The "/u01/app/oracle/10g/db/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
WARNING:The following configuration scripts
/u01/app/oracle/10g/db/root.sh
need to be executed as root for configuring the system. If you skip the execution of the configuration tools, the configuration will not be complete and the product wont function properly. In order to get the product to function properly, you will be required to execute the scripts and the configuration tools after exiting the OUI.
The installation of Oracle Database 10g was successful, but some optional configuration assistants failed, were cancelled or skipped.
Please check '/home/oracle/oraInventory/logs/silentInstall2011-02-01_03-21-55PM.log' for more details.Hi ,
Same thing
Unable to find product oracle.swd.jre[1.4.1, 1.4.1.9.9] in Oracle Inventory
SEVERE:OUI-10104:Some of the configuration assistants failed. It is strongly rec
ommended that you retry the configuration assistants at this time. Not successfu
lly running any "Recommended" assistants means your system will not be correctly
configured. Select the failed assistants and click the 'Retry' button to retry
them.
WARNING:The following configuration scripts
/u01/app/oracle/10g/db/root.sh
need to be executed as root for configuring the system. If you skip the executio
n of the configuration tools, the configuration will not be complete and the pro
duct wont function properly. In order to get the product to function properly, y
ou will be required to execute the scripts and the configuration tools after exi
ting the OUI.
The installation of Oracle Database 10g was successful, but some optional config
uration assistants failed, were cancelled or skipped.
You have new mail in /var/spool/mail/oracle -
Import tablespace failed due to different release version for 10g
I try to exp tablespaces from 10.2.0.2 (Enterprise Edition, UNIX) to our test server 10.2.0.1 (express eidtion, linux) with transportable tablespace, when import the tablespaces, get the following error:
Export file created by EXPORT:V10.02.01 via conventional path
About to import transportable tablespace(s) metadata...
import done in AL32UTF8 character set and AL16UTF16 NCHAR character set
import server uses WE8MSWIN1252 character set (possible charset conversion)
export client uses US7ASCII character set (possible charset conversion)
export server uses UTF8 NCHAR character set (possible ncharset conversion)
. importing SYS's objects into SYS
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 721:
"BEGIN sys.dbms_plugts.checkCompType('COMPATSG','10.2.0.2.0'); END;"
IMP-00003: ORACLE error 721 encountered
ORA-00721: changes by release 10.2.0.2.0 cannot be used by release 10.2.0.1.0
ORA-06512: at "SYS.DBMS_PLUGTS", line 2004
ORA-06512: at line 1
IMP-00000: Import terminated unsuccessfully
I have done the transportable tablespace between 2 test servers before, which are both on the 10.2.0.1. It's done sucessfully at the same target server (LINUX, XE edition). So this is the 1st time I get into this problem. Does anyone know that I can have the express edition upgrade/apply patches so that it will be on 10.2.0.2? Or is there anything I can try to import the tablespace from 10.2.0.2 to 10.2.0.1?
Thanks,
HongmeiDue to no patchset for XE edition, I try to import the tablespace to another LINUX server with EE edition, which is 10.2.0.2, I thought I should be ok for this time. But I get the same error again. I have applied the patches set for 10.2.0.2, and I have followed all steps in the poststeps. Do I miss somthing? Why it still mention it's 10.2.0.1. Thanks for your help. I attached the output here:
Import: Release 10.2.0.2.0 - Production on Mon Jul 21 09:20:57 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
IMP-00002: failed to open /tmp/3tbsp_exp.dmp for read
Import file: expdat.dmp > /tmp/3tbsps_exp.dmp
Export file created by EXPORT:V10.02.01 via conventional path
About to import transportable tablespace(s) metadata...
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export server uses UTF8 NCHAR character set (possible ncharset conversion)
. importing SYS's objects into SYS
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 721:
"BEGIN sys.dbms_plugts.checkCompType('COMPATSG','10.2.0.2.0'); END;"
IMP-00003: ORACLE error 721 encountered
ORA-00721: changes by release 10.2.0.2.0 cannot be used by release 10.2.0.1.0
ORA-06512: at "SYS.DBMS_PLUGTS", line 2004
ORA-06512: at line 1
IMP-00000: Import terminated unsuccessfully
Here is the imp -help output (top lines), it looks like the 10.2.0.2 version:
$ imp -help
Import: Release 10.2.0.2.0 - Production on Mon Jul 21 09:58:56 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved. -
JAI extension automatic installation fail with Java Plug-in 1.4.1_01
Hi everyone,
i have a html page with an applet that use the JAI (Java Advanced imaging) extension. I used to run it with java plug-in 1.3.1_03.
When the JAI extension was not installed, it was automatically downloaded and installed. I use the sun "Signed Auto Installation for browsers" jar available on the JAI download page.
But with Java Plug-in 1.4.1_01, it seems to have a security problem. Is the "Signed Auto Installation for browsers" only java plug-in 1.3 compatible or is there a way to install it with 1.4.
If anyone has encountered the same problem with another extension, it could help me to know how to have it installed automatically with java Plug-in 1.4.
I tested on IE 4 and 6 on Windows NT4 & IE 6 on Windows 2000, and i have the same results.
Thanks
Philippe
see the following java console output :
Java(TM) Plug-in: Version 1.4.1_01
Using JRE version 1.4.1_01 Java HotSpot(TM) Client VM
Modality popped
User selected: 0
Optional package download granted by user, download from http://xxxxxxxxxxxxxxxxxxxxxx/jai_windows-i586.jar
Connecting http://xxxxxxxxxxxxxxxxxx/jai_windows-i586.jar with no proxy
Connecting http://xxxxxxxxxxxxxxxxxx/jai_windows-i586.jar with cookie "JIGSAW-SESSION-ID=J986902630-19"
Loading Root CA certificates from D:\PROGRA~1\Java\J2RE14~1.1_0\lib\security\cacerts
Loaded Root CA certificates from D:\PROGRA~1\Java\J2RE14~1.1_0\lib\security\cacerts
Loading JPI certificates from D:\WINNT\Profiles\qpbl\.java\jpicerts141_01
Loaded JPI certificates from D:\WINNT\Profiles\qpbl\.java\jpicerts141_01
Loading certificates from JPI session certificate store
Loaded certificates from JPI session certificate store
Checking if certificate is in JPI permanent certificate store
Checking if certificate is in JPI session certificate store
Checking if certificate is in Root CA certificate store
Checking if certificate is in Root CA certificate store
Checking if certificate is in Root CA certificate store
sun.misc.ExtensionInstallationException: User deny optional package installer to be launched.
at sun.plugin.extension.ExtensionInstallationImpl.verifyJar(Unknown Source)
at sun.plugin.extension.ExtensionInstallationImpl.access$100(Unknown Source)
at sun.plugin.extension.ExtensionInstallationImpl$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.plugin.extension.ExtensionInstallationImpl.installExtension(Unknown Source)
at sun.misc.ExtensionDependency.installExtension(Unknown Source)
at sun.misc.ExtensionDependency.checkExtension(Unknown Source)
at sun.misc.ExtensionDependency.checkExtensions(Unknown Source)
at sun.misc.ExtensionDependency.checkExtensionsDependencies(Unknown Source)
at sun.misc.URLClassPath$JarLoader.parseExtensionsDependencies(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getClassPath(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Modality pushed
Modality popped
Optional package installation failed.
Installation successfulI seem to be having the same problem. If you figured out the solution, can you please post it?
Thanks -
Trying to run in FPGA mode with VCS Diag fails
I am trying to run OpenSparc with vcs in FPGA mode. The command I used is
sims -sim_type=vcs -group=thread1_mini -novera_build -novera_run -max_cycle= 50000 -config_rtl=FPGA_SYN -config_rtl=FPGA_SYN_NO_SPU -config_rtl=FPGA_SYN_1THREAD
The Diag I used is bypass_win.s The status.log shows it failed
When I remove FPGA option the diag pass.
Can anyone please let me know which diag I should use in FPGA mode.
I wanted to remove latches so I use FPGA_SYN. Also, is it necessary to run FPGA using script rsynp.
Can I synthesize the design other than Simplicity.
Thanks
UpendraHi Durgam,
Thanks for quick reply. I use these options but sim fails at compile time
[upendra@dev2 sim]$ sims -sim_type=vcsi -group=thread1_mini -novera_build -novera_run -max_cycle=50000 -vcs_build_args=FPGA_SYN -vcs_build_args=FPGA_SYN_NO_SPU -vcs_build_args=FPGA_SYN_1THREAD
sims -sim_type=vcsi -group=thread1_mini -novera_build -novera_run -max_cycle=50000 -vcs_build_args=FPGA_SYN -vcs_build_args=FPGA_SYN_NO_SPU -vcs_build_args=FPGA_SYN_1THREAD
sims: ================================================
sims: Simulation Script for OpenSPARC T1
sims: Copyright (c) 2001-2006 Sun Microsystems, Inc.
sims: All rights reserved.
sims: ================================================
sims: start_time Tue Nov 25 15:03:26 PST 2008
sims: running on dev2.liga.local
sims: uname is Linux dev2.liga.local 2.6.9-11.ELsmp #1 SMP Wed Jun 8 17:54:20 CDT 2005 i686 i686 i386 GNU/Linux
sims: version 1.262
sims: dv_root /pub/upendra2/t1_1.6/sim
sims: model_dir /pub/upendra2/t1_1.6/sim/OpenSPARC_model
sims: tre_search /pub/upendra2/t1_1.6/sim/2008_11_25_1/tre/sims.iver
sims: Frozen tre_search /pub/upendra2/t1_1.6/sim/tools/env/tools.iver
sims: processing diaglist /pub/upendra2/t1_1.6/sim/verif/diag/master_diaglist () ..
sims: processing group thread1_mini
sims: using config file /pub/upendra2/t1_1.6/sim/tools/src/sims/sims.config ()
sims -nosimslog -sim_build -novera_build -sys=core1 -vcs_rel_name=thread1_mini_2008_11_25_1 -novera_run -max_cycle=50000 -vcs_build_args=FPGA_SYN -vcs_build_args=FPGA_SYN_NO_SPU -vcs_build_args=FPGA_SYN_1THREAD -nosas -novcs_run
sims: ================================================
sims: Simulation Script for OpenSPARC T1
sims: Copyright (c) 2001-2006 Sun Microsystems, Inc.
sims: All rights reserved.
sims: ================================================
sims: start_time Tue Nov 25 15:03:27 PST 2008
sims: running on dev2.liga.local
sims: uname is Linux dev2.liga.local 2.6.9-11.ELsmp #1 SMP Wed Jun 8 17:54:20 CDT 2005 i686 i686 i386 GNU/Linux
sims: version 1.262
sims: dv_root /pub/upendra2/t1_1.6/sim
sims: model_dir /pub/upendra2/t1_1.6/sim/OpenSPARC_model
sims: tre_search /pub/upendra2/t1_1.6/sim/2008_11_25_1/tre/sims.iver
sims: using config file /pub/upendra2/t1_1.6/sim/tools/src/sims/sims.config ()
sims: using random seed 3932776618
sims: creating model directory /pub/upendra2/t1_1.6/sim/OpenSPARC_model/core1/thread1_mini_2008_11_25_1
sims: setenv VERA_LIBDIR /pub/upendra2/t1_1.6/sim/OpenSPARC_model/core1/thread1_mini_2008_11_25_1/vera
sims: LM_LICENSE_FILE : /apps/mentor/modeltech/license.dat
sims: Building rtl model
sims: Caught a SIGDIE. sim_build_cmd not defined at /pub/upendra2/t1_1.6/sim/tools/src/sims/sims,1.262 line 2456.
sims: Caught a SIGDIE. Could not build model for regression at /pub/upendra2/t1_1.6/sim/tools/src/sims/sims,1.262 line 1281.
I looked at DVGuide. In section 5.3 "Additional FPGA Support in OpenSPARC T1" section It talks about +define. then I serch sims script & found -rtl_config option which I previously used. But with this option the diag fails.
What should I use in order to compile & run successfully. Pl. let me know.
Thanks,
Upendra -
Fail the message in PI, on validation failure
Hi all,
We are working on PI 7.4 SP07 single stack system.
For a particular interface (File(FTP)-->PI-->ABAP Proxy) the requirement is to fail the message in PI and raise an alert if the value for a specific field (say BatchID) in the source file is maintained in lower case.
What is the best way to achieve this requirement.
Please share your thoughts and inputs.
regards,
YounusHi Yonus,
I would recommend the below option rather than failing the mapping in PI .
Check the condition and notify to Business for condition failure .So that they can correct the file and places again
1)Use the Enhanced Receiver Determination and check the condition based on this open either mail or ECC Business component/Business system.
2)Create 2 mappings one for mail and other for ABAP Proxy communication.
There is also an option to fail @ mapping level by throwing a custom exception .
throw new StreamTransformationException("$$$BatchID field value is in lower case$$$");
Regards
Venkat -
Hi,
What are the options of handling failed messages that sit in the message monitor? These are IDoc messages coming from SAP and are processed by the 'Transaction' type. I prefer the failed messages to automatically reprocess. Please advise. Thanks.
Regards,
V M.V M,
if you feed the Query Message action like Christian said, then you should configure a repeater with the string output of the action:
getMessageList.BufferListDoc{/JCOMessageList/JCOMessage}
Inside the repeater use a Read Message action and link the Message ID which comes from the repeater to the Read Message property "MessageId":
forAllMessages.Output{/JCOMessage/MessageId}
If there are no messages found, the repeater will not execute and there will be no error.
Michael -
Clean install mavericks failed. No bootable USB drive either. Help please.
HI guys I really would appreciate some help here.
i Saw on apples site how to do a clean install of mavericks. In disk utilities I erased my osx drive and began The download of a fresh copy. I didn't back up my files as I was going to manually install my applications etc. When the download finished and it tried installing mavericks it failed, I restarted as it was the only option and it failed again. I ran disk repair and it said everything was ok. I only have Internet access at the cafe near where I live so only have it during the day. I checked online with my iphone for similar troubles and found everyone mentioning making a bootable USB version but... As it did not say that on the mac website where it showed how to erase and install a clean copy I never made a USB copy. I'm left with my macbook not able to install my os. Please can anyone advise, I have no way of getting to a Genius Bar and there is no mac service repairs in my area.
I'm now using Internet recovery. I rebooted with option-command-r. A globe came up, I am now downloading mountain lion. Is this the right procedure now or am I wasting time as I only have a few hours left in the cafe with my macbook on? Thank you in advance.
Gregg
ps- I had mavericks up and running on my previously but wanted to basically clean my system of preference files, unwanted folders etc etc. Lesson learnt. I just need advice on the steps I must take to have my system working again .What you are doing now is the correct procedure, install the Mac OS X that came on the machine. From that you can have a working machine and then install Mavericks again.
Building a bootable/installable Mac OS X on a USB drive is time consuming and not necessary for most users...it is not difficult but it takes time and precision to get it right. Perhaps something to do in the future when you have the time.
Using a coffee shop internet connection is not a good idea for installing Mac OS X...you need a good, solid internet connection to do that, one that is reliable and offers sufficient bandwidth. But you don't have much option at this point since you say an Apple store and the genius bar is not available to you.
Finish the Mountain Lion install, reinstall your applications, get the Mac up and running well, then do the Mavericks install on top of the Mac OS X you have.
You would do well to get an external hard drive, great ones are available from OWC http://www.macsales.com and make a good backup of your entire system as soon as you are finished installing Mac OS X. If you make the external a bootable copy, such as by cloning with Carbon Copy Cloner or SuperDuper, you can always have a working computer...life will be much easier with that.
Good luck building Mountain Lion, and get the system running again before upgrading Mac OS X -
Solution for "Continue on fail"?
In think this issue exists not only for my specific example: whenever an action fails, Automator stops. End of workflow. This might be ok if there is a logic error in the workflow but if not, this can be really frustrating...
What I'm trying to do is download images from webgalleries which works perfectly fine in the beginning of the workflow, at least to the point where it comes to actually downloading the files. Since it happens every now and then that links to images are broken or an image is corrupted, Automator will start downloading the images until one of those broken links comes up and then Automator stops, reporting an error "Could not download suchandsuch.jpg: file doesn't exist (-1) occurred in Download URLs".
I don't care if there's one or two images that it can't download but at least it should download the rest of them regardless and continue with the workflow. In that manner, Automator acts like the Finder... if you copy 5000 files from one place to another and file 21 has an error, it will stop right there and not care about if the rest of the 4979 files were ok. So an option "Continue on fail" would be helpful but there isn't any.... :o(
Any suggestions on how to get around this?
PMG5 Dual 2GHz Mac OS X (10.4.9)Replace the Download URLs action with the following AppleScript action:
on run {input, parameters}
repeat with this_item in input
tell application "URL Access Scripting"
set new_path to (reverse of every item of this_item as string)
set new_path to (items 1 thru ((offset of "/" in new_path) - 1) of new_path)
set new_path to reverse of new_path as string
try
download this_item to ("path:to:download:folder:" & new_path)
end try
end tell
end repeat
end run
(21484)
Maybe you are looking for
-
Same Apple ID doesn't work between Macbook and iDevices
I only have one Apple ID. Bought an iPhone game on iTunes while using my Macbook (Republique). Now I can't buy in-app purchase (season pass) on my iPhone or my iPad because it's saying that this game was purchased with a different Apple ID. I've a
-
Trying to update my software (iPhone and iPad) it says my iTunes software needs to be updated, but it is already is. I try this over and over again. I've already reinstalled iTunes and have shut down and restarted my Mac several times. How can I fix
-
Okay, had trouble using a template I purchased. It was extremely difficult to edit the flash template, so I decided to use the html one supplied and edited that one. After years of trying to figure it out, I was able to get it to almost where I want
-
MI31 Inventory: Max. number of selected materials
Hello, we are actually working on the selection of physical inventory documents (transaction MI31). When we select all materials of a plant (by only selecting the plant and leaving the material fields empty) the transaction works fine. But when we se
-
How to eliminate "deleted" images from the .key package?
I've noticed that sometimes, when I delete an image (or movie) from a keynote file, it disappears from the slide show... but the actual image (or movie) file remains in the keynote package. If those images (or movies) are large, it creates enormous u