Novell Vibe 3.3 Virtual Evaluation Problem

Hi,
I have downloaded Novell Vibe 3.3 Virtual Evaluation trial version for testing
After installation, I start the Firefox to access http://localhost and it has redirect to http://localhost:8080/ssf/a/ return HTTP Status 404 error
Any idea about this case?
Thanks

Originally Posted by magic31
Sorry, that still leaves use clueless of where you are at/what you have done. ;-)
Installing Vibe "just out of the box" will most probably not work, as prerequisites need to be configured/set before starting the Vibe install (also have a look at the online documentation: Novell Documentation )
As for my previous questions:
Which OS (vendor/version, service pack level, arch [32/64bit]) have you installed Vibe on?
Which Java JDK version are you using, and how have you configured it?
Cheers,
Willem
Willem,
The OP is using the Virtual machine provided by Novell, it includes -
The Vibe Virtual Eval is a VMware image for use with VMware Player on Linux or Windows. It provides a "test drive" alternative to installing the Vibe evaluation software yourself. The Vibe Virtual Eval includes the following preinstalled software:
Novell Vibe 3.3, ready to configure for immediate use in your existing network environment
Novell Vibe 3.3 60-day evaluation license
SUSE Linux Enterprise Server 11 32-bit
MySQL 5.0.67 database
DN

Similar Messages

Novell Vibe. Bad Idea

Hello.
My first idea is Novell add the capabilities of Novell Pulse and Novell Teaming on a new product named Novell Vibe. Guau, what pretty cool product i have with the capabilities of Teaming and the capabilites of Pulse
But two days ago, i saw y the have DIFFERENT products for the same PRODUCT NAME. They are causing a lot of confusion on my hand.
I Think its a BAD idea to put two different products with different funcionalitys with the same name.
The idea of sell the product on Cloud or OnPremise its a choice of the client, or the manner of sales a product. But to get two differentes products with the same name its a BAD idea.
If you want to offer one product , on the cloud or on promise, fantastic but, you can not putt a name with a different funcionality because you are adding confusion on what do you need and how do you get.
I Am seeking a forum for vibe, but i don t see any .
Regards
Victor

vgalino,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Leopard - QMaster and Virtual Cluster problem

Hi guys,
Up until yesterday I had my MacPro Octo running under 10.4 where I did succesfully set up a Virtual Cluster using 4 instances for Compressor. It worked as a charm and my MacPro was doing it's job perfectly.
Today, I made a bootable backup of my 10.4 install and installed 10.5 using the erase and install options ( clean install ). I installed all my software again and tryed setting up my Virtual Cluster again, using the same settings I had under 10.4. Sadly I can't seem to get it working.
In the QMaster Preferences pane, I have the QuickCluster with Services option checked. For the compressor entry in the Services I have the Share Option checked and used 4 isntances for the selected service. The Quickcluster received a descent name and the option to include unmanaged services from other computers is checked.
I have the default options set in the Advanced tab, ( nothing checked except log service activity to log file and Show QMaster service status in the Menu Bar). I then started the Cluster using the Start Sharing button.
Now I open u Compressor and add a file to process ( QT encode to iPod ), but when I hit the Submit button, my Virtual Cluster doesn't show up in the Cluster Dropdown. If I now leave the Compressor GUI open for 5 minutes, it will eventually show up in the list, and I can pick it. Sadly, picking it from the list at this point and hitting the Submit button makes Compressor Hang.
I checked my logs, but the only thing concerning Compressor I could find is this :
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:41 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488391.647220 218488361.647369) 1'], server [tcp://10.0.1.199:49167]
4/12/07 20:12:41 Batch Monitor[190] exception caught in -[ClusterStatus getNewStatusFromController:withOptions:withQueryList:]: NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488391.647220 218488361.647369) 1'
4/12/07 20:17:55 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488705.075513 218488675.075652) 1'], server [tcp://10.0.1.199:49167]
I tried Stopping and then Restart Sharing and I noticed the follwoing entries in my log :
4/12/07 20:23:26 compressord[210] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 compressord[211] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 compressord[213] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 qmasterca[269] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 qmasterqd[199] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:27 QmasterStatusMenu[178] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489009.603992 218489007.604126) 1'], server [tcp://10.0.1.199:49407]
4/12/07 20:23:27 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489037.738080 218489007.738169) 1'], server [tcp://10.0.1.199:49407]
4/12/07 20:23:27 Batch Monitor[190] exception caught in -[ClusterStatus getNewStatusFromController:withOptions:withQueryList:]: NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489037.738080 218489007.738169) 1'
Batch Monitor immediately detects the cluster being active again, but Compressor doesnt, leaving me only This Computer available in the Cluster drop down when submitting a batch.
In my Activity Monitor, I notice that CompressorTranscoder is not responing ( the 4 CompressorTranscoderX processes are fine ) and the ContentAgent proces isn't responding neither.
Does anyone have any clue on what I could check next or how I could fix my problems ?
Thanks a lot in advance,
Stefaan

Bah, this is crazy, today it doesn't work anymore. Yesterday my cluster was showing up in the Dropdown window, and I could submit a batch to it, and it got processed over my virtual cluster.
Today, after finishing the second part of my movie, I tried it again. I didn't change anything to my settings, my machine hasn't even rebooted (just recovered from sleep mode) and my cluster isn't showing up at all anymore. Even the Qmaster menu doesn't show it
Guess, I'll have to wait out until it appears again, or try a few things out

Virtual function problem with SC 4.2

Hi
I'm using SC CC 4.2
[CC -V
CC: WorkShop Compilers 4.2 18 Sep 1997 C++ 4.2 patch 104631-04]
not the latest patch, I realize.
The following bit of code:
ProcessParameters *ppp = &(_config.process_params_);
ppp->save_to_file(String("abc"));
config.processparams_.save_to_file(String("xyz"));
does not work as I'd expect it to!
config.processparams_ is of type ProcessParametersEnhanced,
and the definition of this, and its base class, looks like:
class ProcessParameters
public:
virtual int save_to_file(String filename);
and
class ProcessParametersEnhanced : public ProcessParameters
public:
virtual int save_to_file(String filename);
(I've cut everything else out of the class definitions for clarity, and I've changed the names a bit as well, hopefully without typos).
ppp->save_to_file(String("abc"));
calls ProcessParameters::save_to_file(String)
even though ppp points to an instance of ProcessParametersEnhanced, and the function is virtual.
I've tried building a small test application, using the minimum class interfaces, but this works as I'd expect (it also works fine with gcc).
I'm getting deseperate. Is there a bug in SC4.2 whereby it fails to resolve virtual functions correctly?
TIA
Paul Floyd

Oh well, it was an SC4.2 bug
Patch-ID# 104631-07
Keywords: C++ 4.2 SC4.2
Synopsis: SPARCompiler C++ 4.2: C++ 4.2 patch for Solaris 2.x
Date: Jul/17/98
4066271 C++ has a problem with a copy constructor using virtual and multiple inheritance
It seems as though the copy ctor doesn't copy the vtbl.
Cheers
Paul

Custom Report Item CustomData evaluation problem in a subreport loop

Came across a strange problem with the custom report item CustomData property evaluation when using a sub report loop.
I have a master report, which contains a sub report component within a List. The List is bound to a dataset from which a numeric value is passed on to a sub report's report parameter, and from there further down as an argument to a sub report dataset. The sub
report contains our custom image CRI, which is bound to the said dataset. This dataset outputs a base64 encoded image data value, which the CRI then renders.
Now the problem is that only the first sub report iteration gets evaluated correctly, rest of them seem to get their CRI CustomData from the first iteration. So essentially the loop just outputs the same first sub report over and over again.
However, if I make the List component do a page break after each sub report, then all the sub reports start getting rendered correctly.
Here's how the CustomData gets initialized in the CRI designer class:
this.CustomData = new CustomData();
this.CustomData.DataRowHierarchy = newDataHierarchy();
this.CustomData.DataRowHierarchy.DataMembers.Add(newDataMember());
this.CustomData.DataRowHierarchy.DataMembers[0].Group = newGroup();
this.CustomData.DataRowHierarchy.DataMembers[0].Group.Name = this.Name + "_SingleGrouping";
this.CustomData.DataRowHierarchy.DataMembers[0].Group.GroupExpressions.Add(new ReportExpression());
this.CustomData.DataColumnHierarchy = new DataHierarchy();
this.CustomData.DataColumnHierarchy.DataMembers.Add(new DataMember());
DataRow row = new DataRow();
DataValue value = new DataValue();
value.Name = "Base64";
value.Value = "";
DataCell cell = new DataCell();
cell.Add(value);
row.Add(cell);
this.CustomData.DataRows.Add(row);
The CRI also exposes the CustomData's DataSetName and a Base64 property.
Has anyone else seen something like this happen? Not sure if this could be an issue with our CustomData configuration/usage, the API documentation is pretty much non-existent as usual. Seems more like bug to
me.
Leo Wartinen, Predisys Inc.

Hi WarLe,
If I understand correctly, you are using a list control to contain the subreport in the master report. The dataset of the list contains the field which is passed as the parameter values of the subreport. When you render the report, only the first subreport
gets evaluated correctly, rest of them seem to get their CRI CustomData from the first iteration, right?
If in this scenario, it seems that you haven’t add a group in the list. We can try to add a group grouped on the field which is passed as the parameter values of the subreport to check the issue again. Besides, could you mind post the sample data for the
dataset of the list and tell us the settings for the list control? Then we can make further analysis.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Novell client on Vista log-in problem.

(Netware 6.5) Installing a Vista pro with the latest Novell VISTA
client ( 1.0), I ran into problems. It's like the client won't browse
the tree and therefore can't log in. If I enter the server's IP
address in the tree field, it finds both the context and the server
right away. But after a reboot, that's gone again and you have to
enter the server IP manually again to log in?
This works fine on the XP clients in the same network. I have tried
to enter the server IP in the SLP scope list and add DHCP to the
protocol list - but that didn't make any difference.
It's like the NW naming disappears after each reboot.
Any suggestions?

these are the classic "slp is not configured correctly" symptoms...
slpinfo /all shows what?
and do you have the proper DA IP# and scope configured?
there are MANY threads discussing this in this group. search should
find them....
Cheers!
Richard Beels
~ Network Consultant
~ Sysop, Novell Support Connection
~ MCNE, CNE*, CNA*, CNS*, N*LS

Virtual terminal problems (konsole, lxterminal)

Hi,
I did not find the solution for my particular problem, where the virtual terminal can't connect to the bash execution.
I'm using arch linux including all repos [testing, community-testing], and after a update, I'm unable to run konsole or lxterminal. However, xterm does work. I'm using kde 4 enviorment.
Whenever I run konsole from xterm I get:
$ konsole
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
konsole(3236)/kdecore (KPty/K3Process) KPty::open: Can't open a pseudo teletype
konsole(3236) Konsole::Pty::flowControlEnabled: Unable to get flow control status, terminal not connected.
An konsole window appears, but no prompt or anything. If I do an ps -A | grep bash it gives an bash execution not connected anywhere:
3288 ? 00:00:00 bash
if I kill it, then this message appears on the konsole terminal:
Warning: Program '/bin/bash' crashed.
I did search for it before, and found out the topic Terminal not running, but my devpts and shm are mounted correctly.
mount
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
dev on /dev type devtmpfs (rw,nosuid,relatime,size=4082808k,nr_inodes=1020702,mode=755)
run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000)
tmpfs on /sys/fs/cgroup type tmpfs (rw,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct,cpu)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=28,pgrp=1,timeout=300,minproto=5,maxproto=5,direct)
tmpfs on /tmp type tmpfs (rw)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
none on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda1 on /Fedora type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /windows type fuseblk (rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb2 on /data type ext4 (rw,relatime,data=ordered)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=100)
Any clues?
Regards
Diogo

undeadb wrote:Mostly everything, was 4 months without a update. Got over 2GB of downloads. It did update kde.
Then I think the problem is related to the merging of all applications into "/usr/bin". "/bin/bash" kind of doesn't exist anymore.
Did you read the Arch Linux announcements before updating?
If you do think that's the problem, then I don't know what you can do to fix it. I'm not smart enough. I'd probably just reinstall the OS.

Fail Safe Virtual IP Problems

I have a Windows 2008 R2 SP1 2 node active/passive cluster with fail safe 3.4.2 installed. I also have 11G database software installed. My problem is I am unable to successsfully add an oracle virtual IP to the oracle group within fail safe. I receive the below error when I try. Can anyone please help me in the right direction with this? I need to get this resolved so that I can add my databases to the cluster. Thank you.
Oracle Fail Safe Manager
FS-10890: Oracle Services for MSCS failed during the create operation
FS-11220: Failed to create the virtual address
FS-10012: Failed to bring the cluster resource Network Name HHVHAVELP01 online. Check the Windows event log for messages.
FS-10726: Resource Network Name HHVHAVELP01 is in a failed state
I don't see any message in the event log when I check...

Hi,
Your problem looks-like this metalink note 416339.1
Check it on oracle support.

NAC OOB VIRTUAL GW PROBLEM

Hi,
I am trying to setup a NAC OOB Virtual GW Scenario (attached is the visio schematic of the setup):
Switch: 3550 (ios 12.2(46) adv ip serv)
NAC 4130 appliances: v4.1.6 (also tried v4.5)
Switch Configuration of the trunks to the CAS):
- int f0/23 (connected to CAS e0) -> dot1q trunk with native vlan 999 and allowed vlans 199 (mgt vlan of cas) and 10 (hosts access vlan)
- int f0/21 (connected ro CAS e1) -> dot1q trunk with native vlan 998 and allowed vlans 100 (hosts authentication vlan)
- SVIs on switch: 199, 10, 200 (CAM mgt vlan), 99 (dns, dhcp)
The problem I am facing is that the host once connected to a managed port is able to acquire an ip from the access vlan from the dhcp server but is not redirected to the login page. I tried to follow some hints provided in previous posts but none of them worked for me. I configured the following:
- Login Page
- Configured IP based traffic control on the unautheticated role to permit all traffic (also host based to permit https://192.168.199.1 -> cas' ip with trusted dns my dns server 192.168.99.1)
- Managed subnet with unused ip in access vlan (192.168.10.253) and vlan id that of the auth vlan (100)
- vlan mapping between untrusted vlan 100 and trusted vlan 10
- tried to access a resolvable website by my dns from the host (as per the suggestion from a previous post for someone who was facing the same prob)
- also tried to access the cas' login page from the host with vain, eventhough it is accessible from trusted subnets
Note: I followed the configuration guide of both v4.1.6 and v4.5 and with both versions I was facing the same problem.
I would be very thankful for any hints to help me solve this issue.
Questions: When the host is connected to a managed host (assigned to the managed vlan 100) and it is assigned an ip from the a access vlan 10. Shouldn't I be able to access the managed subnet case I configured ip traffic control policy to permit all traffic from untrusted to trusted? also shouldn't I be able to resolve website's ip with "nslookup x.com" since dns traffic is by default configured and also trusted dns server 192.168.99.1 is configured?
Thanks in advance for any help.

It arised to be that the 3550/3560/3750 are not supported for Central Deployment. The problem is solved.
Cisco Catalyst 3550/3560/3750 and NAC Appliance In-Band Central Deployment
For Cisco Clean Access (NAC Appliance) in In-Band Central Deployment mode, when a Cisco Catalyst 3560/3750 series switch is used as a Layer 3 switch and if both ports of the Clean Access Server (CAS) are connected to the same 3560/3750 switch, the minimum switch IOS code required is Cisco IOS release 12.2(25)SEE.
Because caveat CSCdu27506 is not fixed on the Catalyst 3550 series switch, when the Catalyst 3550 is used as a Layer 3 switch, it cannot be used in NAC Appliance In-Band Central Deployment.
For further details, refer to switch IOS caveat CSCdu27506:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCdu27506
See also Switch Support for CAS Virtual Gateway/VLAN Mapping (IB and OOB).
Switch Support for CAS Virtual Gateway/VLAN Mapping (IB and OOB)
Table 6 describes Cisco Catalyst switch model support for the Virtual Gateway VLAN Mapping feature of the Clean Access Server for either in-band (IB) or out-of-band deployments (OOB). This table is intended to clarify CAS network deployment options when connecting the CAS in Virtual Gateway (bridge) mode to the switches listed.
Table 6 Switch Support for CAS Virtual Gateway In-Band/OOB VLAN Mapping Feature
Cisco Catalyst Switch Model Virtual Gateway
Central Deployment
(both interfaces into same switch) Edge Deployment
(each interface into different switch)
6000/6500 Yes Yes
4000/4500 Yes Yes
3750/3560 (L3 switch) Yes with 12.2(25) SEE and higher 1
Yes
3550 (L3 switch) No 1
Yes
3750/3560 (L2 switch) Yes Yes
3550 (L2 switch) Yes Yes
2950/2960 Yes Yes
2900XL No 2
Yes
3500XL Yes Yes
28xx NME Yes with 12.2(25) SEE and higher 1
Yes
1 Due to switch caveat CSCdu27506. See Cisco Catalyst 3550/3560/3750 and NAC Appliance In-Band Central Deployment for details.
2 2900 XL does not support removing VLAN 1 from switch trunks.

Very strange EL evaluation problem

Hi,
I have a very strange problem atm.
I'm trying the JNDI Resources example on tomcat.
My test.jsp page looks like this:
<%@ page contentType="text/html;charset=UTF-8" language="java" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<html>
<head>
<title>DB Test</title>
</head>
<body>
<h2>Results</h2>
<c:out value="${1+2+3}"/>
<sql:query var="rs" dataSource="jdbc/JavaTest">
select id, foo, bar from testdata
</sql:query>
<c:out value="${rs.rowCount}"/>
<c:forEach var="row" items="${rs.rows}">
Foo ${row.foo}
Bar ${row.bar}
</c:forEach>
<br>
</body>
</html>
The output of this page is this:
Results
${1+2+3} ${rs.rowCount} Foo ${row.foo}
Bar ${row.bar}
As you can see these expressions are just written out to the browser and they are not being evaluated.
The problem is not with tomcat itself because other jsp's without database access work perfectly.
My web.xml file looks as follows:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<description>MySQL Test App</description>
<resource-ref>
<description>blah</description>
<res-ref-name>jdbc/JavaTest</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
my context.xml file looks as follows:
<Context path="/DBTest" docbase="DBTest.war" debug="5" reloadable="true" crossContext="true" useNaming="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_DBTest_log." suffix=".txt" timestamp="true"/>
<Resource name="jdbc/JavaTest"
auth="Container"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/JavaTest">
<parameter>
<name>factory</name>
<value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>100</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>30</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>10000</value>
</parameter>
<parameter>
<name>username</name>
<value>THiNG</value>
</parameter>
<parameter>
<name>password</name>
<value>**********</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>com.mysql.jdbc.Driver</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:mysql://localhost:3306/javatest?autoReconnect=true</value>
</parameter>
<parameter>
<name>removeAbandoned</name>
<value>true</value>
</parameter>
<parameter>
<name>logAbandoned</name>
<value>true</value>
</parameter>
<parameter>
<name>removeAbandonedTimeout</name>
<value>300</value>
</parameter>
</ResourceParams>
</Context>
I've included the jstl.jar and standard.jar from the jstl package in the WEB-INF/lib directory, also the mysql-connector-java.jar (JDBCDriver) is included in the web-inf/lib directory.
Here is the logfile, which might contain the answer to my problem: (I removed the ResourceRef specification because it's exactly the same as in the context.xml file)
2004-09-29 13:45:01 NamingContextListener[Catalina/localhost/DBTest]: Resource parameters for jdbc/JavaTest = ResourceParams[]
2004-09-29 13:45:01 NamingContextListener[Catalina/localhost/DBTest]: Adding resource ref jdbc/JavaTest
2004-09-29 13:45:01 NamingContextListener[Catalina/localhost/DBTest]: ResourceRef[............]
2004-09-29 13:45:01 NamingContextListener[Catalina/localhost/DBTest]: Resource parameters for UserTransaction = null
2004-09-29 13:45:10 NamingContextListener[Catalina/localhost/DBTest]: Resource parameters for jdbc/JavaTest = ResourceParams[......................]
2004-09-29 13:45:10 NamingContextListener[Catalina/localhost/DBTest]: Adding resource ref jdbc/JavaTest
2004-09-29 13:45:10 NamingContextListener[Catalina/localhost/DBTest]: ResourceRef[...........]: Resource parameters for UserTransaction = null
Can somebody help me with this. I've been looking for a sollution for hours.
I've been having problems setting up the jdbc-driver also, but I think this is solved now with these deployment descriptors. I don't have a single clue what is going on right now.
${} expression are simple NOT being evaluated.
I don't think it's a database problem because I can see the user connections in the mysql monitor.
Any ideas? All help is welcome and very much appreciated. :-)
THANKS !!!
PS: sorry for the extreme long post, I wanted to post all relevant information to track this strange behaviour down.

Seems to be a problem with your web.xml not pointing to version 2.4.
Just check this link too:
http://www.mail-archive.com/[email protected]/msg07006.html
HTH

Another Mailman and virtual domains problem... mailbox does not exist

Hi,
this is yet another thread about virtual domain mailinglist with mailman.
To sum up:
- OpenDirectory account "[email protected]" -> mail delivered
- Deleting this account and creating a mailing-list "test11", opening the admin interface to change the host "server.domain.com" (which is the primary host of the machine, so each mailinglist is created with this host) and replacing it with "virtualdomain.com"
- sending an email to "[email protected]" -> following error:
Jan 18 14:12:23 server postfix/qmgr[74872]: 698E5BF735: from=<[email protected]>, size=691, nrcpt=1 (queue active)
Jan 18 14:12:23 server postfix/pipe[74882]: 698E5BF735: to=<[email protected]>, orig_to=<[email protected]>, relay=cyrus, delay=0.28, delays=0.14/0.01/0/0.13, dsn=5.6.0, status=bounced (data format error. Command output: test11: Mailbox does not exist )
- adding back the OD account "[email protected]" -> mail delivered to inbox (not to mailing-list recipients)
- now if i delete the mailinglist in Server Admin then send an email to "[email protected]" -> following error (seems obvious):
Jan 18 13:18:49 server postfix/lmtp[74275]: A9B7CBF45F: to=<[email protected]>, relay=server.domain.com[/var/imap/socket/lmtp], delay=0.16, delays=0.13/0/0/0.03, dsn=5.1.1, status=bounced (host server.domain.com[/var/imap/socket/lmtp] said: 550-Mailbox unknown. Either there is no mailbox associated with this 550-name or you do not have authorization to see it. 550 5.1.1 User unknown (in reply to RCPT TO command))
IOW, it looks like somehow the mailinglist aliases are being lost somewhere.
Postfix forgets to delivers the incomming mails to Mailman, doesn't it? According to lots of forum searchs it could be forced by using one of those two commands:
sudo /usr/sbin/postalias
sudo /usr/sbin/postmap
Unfortunately I dont know how they work precisely and can't find X.5 accurate information so I hope you can guide me through this step.
Also I don't know how to track the incomming mails at the moment they are dispatched to either an OD account (so it's delivered or generates the 550 error) or a Mailman list (so it's looking for aliases and so on).
Any help will be appreciated.
Config:
- in /etc/postfix/main.cf
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/virtual-mailman
virtualaliasmaps = hash:/etc/aliases,hash:/var/mailman/data/virtual-mailman
- in /etc/postfix/virtual_domains
virtualdomain.com allow
- in /var/mailman/data/virtual-mailman
# LOOP ADDRESSES START
[email protected] mailman-loop
# LOOP ADDRESSES END
# STANZA START: test11
# CREATED: Sun Jan 18 13:55:03 2009
[email protected] test11
[email protected] test11-admin
[email protected] test11-bounces
[email protected] test11-confirm
[email protected] test11-join
[email protected] test11-leave
[email protected] test11-owner
[email protected] test11-request
[email protected] test11-subscribe
[email protected] test11-unsubscribe
# STANZA END: test11
- in /var/mailman/data/aliases
# The ultimate loop stopper address
mailman-loop: /private/var/mailman/data/owner-bounces.mbox
# STANZA START: mailman
# CREATED: Sun Jan 18 14:11:53 2009
mailman: "|/usr/share/mailman/mail/mailman post mailman"
mailman-admin: "|/usr/share/mailman/mail/mailman admin mailman"
mailman-bounces: "|/usr/share/mailman/mail/mailman bounces mailman"
mailman-confirm: "|/usr/share/mailman/mail/mailman confirm mailman"
mailman-join: "|/usr/share/mailman/mail/mailman join mailman"
mailman-leave: "|/usr/share/mailman/mail/mailman leave mailman"
mailman-owner: "|/usr/share/mailman/mail/mailman owner mailman"
mailman-request: "|/usr/share/mailman/mail/mailman request mailman"
mailman-subscribe: "|/usr/share/mailman/mail/mailman subscribe mailman"
mailman-unsubscribe: "|/usr/share/mailman/mail/mailman unsubscribe mailman"
# STANZA END: mailman
# STANZA START: test11
# CREATED: Sun Jan 18 14:11:53 2009
test11: "|/usr/share/mailman/mail/mailman post test11"
test11-admin: "|/usr/share/mailman/mail/mailman admin test11"
test11-bounces: "|/usr/share/mailman/mail/mailman bounces test11"
test11-confirm: "|/usr/share/mailman/mail/mailman confirm test11"
test11-join: "|/usr/share/mailman/mail/mailman join test11"
test11-leave: "|/usr/share/mailman/mail/mailman leave test11"
test11-owner: "|/usr/share/mailman/mail/mailman owner test11"
test11-request: "|/usr/share/mailman/mail/mailman request test11"
test11-subscribe: "|/usr/share/mailman/mail/mailman subscribe test11"
test11-unsubscribe: "|/usr/share/mailman/mail/mailman unsubscribe test11"
# STANZA END: test11
- in /usr/share/mailman/Mailman/mm_cfg.py
MTA = 'Postfix'
POSTFIXSTYLE_VIRTUALDOMAINS = ['virtualdomain.com','mail.virtualdomain.com']
add_virtualhost('virtualdomain.com', 'mail.virtualdomain.com')

I've finaly solved the problem by myself, mixing postfix-style aliases.
Since it's quite long I wrote a tutorial, it's here:
http://spip.ashorlivs.net/notepad/os-x/article/virtual-host-mailman-w-os-x-serve r
Hope it can help someone else.
Regards,
g.
Message was edited by: ashorlivs

Editing Film Photos and Virtual Copy Problem

I just scanned some film in and then imported it to lightroom. I am now running into a problem when I go to retouch/edit the film in photoshop. When I scan the film in it scans in as a .tiff file. I first tried to edit just the original to see if it would save back into lightroom as .psd but it didnt it saved the original tiff. I want to have two copies, the original and the edited file. So second I tried to make a virtual copy and edit that one and save it but again it saved both the virtual copy and the original file with the edits that I made. I finally tried right clicking the original file and editing with edit a copy. This finally worked I was able to have a copy and the original file unedited.
My question is if I edit this way and have a bunch of edit with copies is my picture sizes going to double? (having two copies of each photo, one edited and one original)
Or is there a way to edit a .tiff as a virtual copy and not have it save the changes to both files.
hope this wasn't super confusing

Thanks Sean..
Actually it did work but on the flickr side, i didn't notice until i logged on.. The Flickr side added a '2' to the virtual copy although Lightroom uses the original name/copy. So i guess it works, just a little confusing. I have not tweaked the virtual copy yet to see if it updates the '2' copy on Flickr or throws a wobbly instead
I used Jeffrey's plugin for sometime but eventually I decided to delete all my photos from flickr (new account anyway) and decided to go fresh with LR 3. It works really well and any tweak i make get's republished without deleting any previous comments or data. Jeffrey's just doesn't have that same visual impact and integration. The LR version has a few quirks but seems stable enough for solid use... Just need to be smart with it because pilot error can make problems.
S

Virtual component problem in Multisim 11

Hello all,
I am a Multisim beginner. I have a 3PDT switch in my circuit and when I try to Transfer to Utilboard it gives me an error message that this component will not be transfer because it is a virtual component. What does this mean and how do I solve this problem?
Thanks,

Hi Eth,
It means that there is no footprint assigned to this component.You should either replace it with a component that already has a footprint or make a footprint for that according to the datasheet.
Here you can find a great tutorial that helps you assign a footprint to a virtual component.
Tell me if you still had any problems with that.
http://digital.ni.com/public.nsf/allkb/364FC33F1DB69255862571B800632DC4
Regards,
Leila F.
National Instruments

BCS - Virtual Cube problem

I have problems in manage of the cube or list cube for the 0BCS_VC11 cube.
Data is there in the real time cube and no problem in the connection as well.Is these due to new NW2004s functionality any settings to be done for virtual cubes??
thanks

<b>Steps -</b>
For a BCS following criteria is mandatory,values below are as per my client specific requirement you may have different values.
Restrict fiscal year variant = K4
0CS_CHART(Cons Chart of Accts) = 99
0VERSION(Version)=900
Hope it Helps
Chetan
@CP..

Novell Welcome portal says 'Virtual Office' is not installed, but v1.6 is.

Subject straight forward, NW 6.5SP3 server, installed VO 1.6, and it
seems accesible, however when you go to the base portal welcome page,
it says the product's not installed. Any ideas?
FYI, it previously had 1.3 installed, and I was in the process of
upgrading to iManager 2.6, so I removed (uninstalled) 1.3, and then
installed 1.6, iMan2.6, and now it seems like the services themselves
are working, but they are not reporting installed onthat page.
Thanks,

Andy,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Novell Vibe 3.3 Virtual Evaluation Problem

Similar Messages

Maybe you are looking for