Novice needs help with multi-cam

Hi, I've got 3 cameras and a seperate audio track synched in my timeline. (CC Premiere Pro 6 on a PC with - unfortunately, Windows 8) The cameras didn't all start at the same time but no problem the clips are where they need to be now. I've made several edits getting rid of stuff I don't need, and I've added a title, end note, and a few stills. All the tutorials I've watched deal with starting clips at the beginning but I can't seem to find one that shows what to do with a bunch of things already in the timeline where they need to be. Here's a screen shot if that helps to explain what I've done so far.I've tried nesting the clips and dragging that into the source panel, but no luck. Obviously, I'm missing something here (this is my very first project) hope someone can help.

Yes, what Jim said...
or if you really want to leave all your little stills and titles there and not have to add them later then alt+select all the video clips only and right click>nest. You can select all the audio clips too but I usually leave them there so I can see them all individually (personal preference) and I never have audio follow video in my edits so it's not necessary. Then right click>Multicam>Enable and proceed with #3 from Jim's list. I actually prefer to ignore the wrench and add that one touch little multicam toggle icon to the program monitor which it appears you've already done so you just need to select the far right icon on the bottom of your program window next to the little camera icon. That's the multicam toggle. Multicam cutting now takes place in the Program Window instead of the Source Window like it was in CS6. Oh also, the little "tweaks" that Jim mentioned can be easily done with the Rolling Edit Tool (Shortcut: N) You'll see. Good luck!

Similar Messages

  • Need help with Multi-cam editing in Premiere Pro CC/7.0

    I've been using 6.0 for a while now, and had to install 7.0/cc, but now I can't find where to record multi-cam edits.  I've already lined up my clips and created a new sequence and enabled multi-cam, I just don't see the Multi-Cam Editor.  Please help!

    Hey!
    I found the record-button in the programm panel. But now it won't let me hit record. The button is disabled (see screenshot).
    What can I do about it?
    If I just hit play and then change the angles in the source window, Premiere won't record those edits. Only thing it does is it keeps the whole clip in this one angle.

  • TS2771 I need help with my camera it's shows a black screen. And I have restarted it many times

    I need help with my camera it's shows a black screen. And I have restarted it many times

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Y are not alones. Sometimes the camera fails.
    Apple Retail Store - Genius Bar                                      

  • Help with multi camera editing in Premiere Pro

    Ok I'm new...so bear with me.
    I am editing a basic interview shot on two cameras and cutting away to some still images.
    The rushes are 4 lots of film about 10 mins in length.
    I inputted the footage from the two cameras and created a new sequence for each using the multi camera audio synchronisation method (which worked great).
    So how do I go about creating my edit? Something tells me I'm going about it in the wrong way.
    Do I need to create my edit using single camera shots and then create multi camera sequences for each individual clip? It seems so laborious as its all already synced up for two cameras.
    I am a bit confused about creating clips v creating sequences.
    I'm sorry if this is making some of you cringe :/ ....but I really can't find any help in online tutorials.
    I need basic step by step instruction.

    I am editing a basic interview shot on two cameras and cutting away to some still images.
    The rushes are 4 lots of film about 10 mins in length.
    I inputted the footage from the two cameras and created a new sequence for each using the multi camera audio synchronisation method (which worked great).
    So how do I go about creating my edit? Something tells me I'm going about it in the wrong way.
    Do I need to create my edit using single camera shots and then create multi camera sequences for each individual clip? It seems so laborious as its all already synced up for two cameras.
    humm, sounds like your 4 lots do not overlap in time, and that there is space between each lot. So would that be 4 multi-camera sequences with the two cameras?
    If so, why even multicamera edit that? and just set up to Video tracks, sync the audio and opacity keyframe between the two tracks.
    Good to get your multi-camera edit workflow going proper though.
    Sounds like you need to multi-camera edit your 4 sequences separately, unless you sync each lot with its corresponding clip and put on the same timeline, then do one sequence and one multi-camera edit

  • I am a beginner in Labview and need help with multi-device synchronization.

    I am using a VI I found in order to continuously acquire and write voltage.  The next phase is to somehow synchronize this with a linear platform and am wondering if there are any tutorials on how to do this out there, or if anyone could give just general advice.  I'm not necessarily asking for explicit details on the code but rather where I would be able to improve my skills in a way that would help with this project.  Thank you in advance.

    Hi riraheta,
    Are you using daq? Can you tell me more about this linear platform which you want to synchronize? What operation do you plan to synchronize?
    There are some examples online which has to do in synchronizing devices, depends on what you're planning to synchronize. The following are the few I have found.
    Links (Presuming that you're using DAQ devices):
    Synchronize Continuous Acquisition of Multiple Analog Devices (login required)
    https://decibel.ni.com/content/docs/DOC-12182
    Easily Synchronize Your Measurements in LabVIEW 2010
    http://www.ni.com/white-paper/11549/en/
    Application Design Patterns: Producer/Consumer
    http://www.ni.com/white-paper/3023/en/
    Application Design Patterns: Master/Slave
    http://www.ni.com/white-paper/3022/en/
    Timing and Synchronization Features of NI-DAQmx
    http://www.ni.com/white-paper/4322/en/
    Or you can search it from your NI Example Finder (Open LabVIEW >> Help >> Find Examples... >> Type in the keyword of your interests)
    Hope it helps
    Warmest regards,
    Lennard.C
    Learning new things everyday...

  • FCP Novice needs help with video quality and FCP 5!!

    Hi,
    I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
    I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
    I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
    The final footaage looks like an old VHS recording that's a year or two old!
    Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
    Is there some presets I should be working to?
    I'm tearing my hair out! Help!

    Hi Guys,
    thanx for your replies.
    here's the latest:
    Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
    When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
    Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
    I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
    Does this make sense to you guys or am I still doing something very wrong?
    Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
    Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
    any more help guys would be greatfully appreciated.

  • New logic user, need help with multi-channel inst and aux strips.

    Greetings all,
    So I just purchased a new Mac Pro 2.66 and Logic Pro 7 to run with it. I have been a long time Nuendo/Cubase user on the PC side of things but since I got the Mac I wanted a DAW that was supported fully for the apple platform.
    Anyways, its a world of difference and I am very confused as I wrap my head around the learning curve, so in the meantime I have one important question maybe some one could help me with.
    The question is regarding Aux channel stips for Multi channel instruments. In this scenario I am working with Battery 3, it took me a while to understand that I actually needed to create these aux channels just to have seperate outs in Battery which seems really wierd and overly time consuming.
    As an example in Nuendo once you create the instance of Battery, the audio mixer automatically just creates the corresponding stereo and mono channels instantly. This obviously makes is a sinch to assign Batteries pads to seperate outs for eq/comps for seperate sounds.
    Now the Battery manual doesnt even make a reference to Aux channels for assigning outs in Logic, I actually had to do a Google search to figure this out.
    Anways, sorry for rambling...
    Here is the main issue.... How can I quickly and easily create multiple Aux's? In the mixer there is really only enough room in there to add like 1 more Aux strip, if I want to add more than that I need to re-arrange the entire global mixer which seems like a crazy system, surely there must be a more convenient method for getting muti-channel audio instruments set up quicker.
    Any help you can assist with would be exceptional!
    Thanks in advance.

    Not sure what exactly your question is, especially since I don't use battery. But as far as creating aux tracks:
    • go to the audio layer of the environment (not the track mixer window), find the two defalt aux tracks
    • Highlight all tracks to the right of the aux tracks (these should be bus and output tracks), and drag to the right far enough to fit in a bunch of aux tracks; you might even want to drag the all underneath the aux tracks, if your screen accomodates
    • use the key command shift-command-a multiples times to create several new "audio objects", and double click each one to expand
    • highlight all the new objects and select options/clean up/ align objects (makes it look nicer)
    • still highlighted, over in the parameters section (left side) select a channel, setting it to the highest number aux (at this point, probably "aux 3")
    • now individual set the channel for each aux track – you'll see that now you have available "aux 4"; next time you set a successive track you'll see "aux 5" and so on
    • once you've got things set up the way you want, save it as a template so you don't have to do this again later

  • Need help with foscam cameras connecting to AirPort Extreme N

    Greetings,
    I could really use some help from the AirPort gurus! I have an AirPort Extreme N base station, with firmware 7.4.2. I purchased a couple of Foscam FI8908W pan and tilt cameras. I am trying to get them to work on my home network, but cannot figure it out. Personally I think it might have something to do with port forwarding, but hec I just don't know. I have tried searching for answers, but came up empty. Here is a copy of the manual for anyone if interested <http://idisk.mac.com/wheelchairguy-Public>. I have been using VMware with XP to try and setup the camera, but the camera is not found with the IP Cam setup software. I thought I might be able to directly connect to my computer with an Ethernet cable, but no go there either. Also no go with an ethernet cable plugged to the camera into the base station. I just have no idea where or what I am doing wrong. If anyone can help me, I would be very grateful.
    Thanks,
    Mark

    Hi OneCog,
    We're also have broadband connected to TimeWarner. When I first got the camera I tried the same thing and had the same problem. I never read the docs and assume plug and play. So I just plugged the ethernet cable from my laptop to the camera directly and of course my laptop was connected wirelessly to the internet. It doesn't work that easily and don't worry about the cable modem, you never have to touch it's settings.
    I went to the http://foscam.us website and found these instructions that actually worked:
    Foscam IP Camera Instructions
    Software Insallation:
    Install from the Cd the IPCamSetup.exe file OR
    Or download the IPcamsetup.exe file from the website Foscam.us
    a) Go to the website Foscam.us
    b) Click the tool & support section (top middle section)
    c) Click on Download IP Camera Tools (for FI8908W or FI8904W)
    d) Click on IPCamSetup.rar (bottom left corner)
    e) Click on IPCamSetup.exe
    You should now have an IP Camera Tools Icon
    Hardware Installation:
    Plug the Ethernet network cable(grey wire) into the camera then into the router
    Plug the power adapter (black wire)into the camera and then into the power outlet
    Opening the Camera:
    Once` plugged in correctly, double click on the icon IP Camera Tools
    The Camera’s IP address will appear, double click on it to open the camera
    (If “subnet doesn’t match” appears , double click on it and check the box ’Obtain IP from DHCP server’ then click on OK)
    Login to the Camera:
    User: admin
    Password: (leave it blank)
    Click Login button
    NOTE: Press the first Login button if using internet Explorer or other browsers OR
    Press the second Login button if using Firefox, o r Google Chrome
    Test to see if working:
    Click on “Live Video”
    Connecting Camera to Wireless:
    Type your router Ip address unto your browser( press enter)
    (Don’t know your router IP address? SEE: Finding your router IP address)
    You may have to login or give your password. Do so.
    Under the word Wireless(on left) find ‘Channel and SSID’
    Click on ‘Channel and SSID’ write down(on paper) the SSID name
    Click on ‘Security” and write down Security type, Authentication, Encryption Technique and Pre-shared Key information
    Login back to the camera
    Double click on Ip camera tools
    Double click on camera’s Ip address
    User: admin
    Password: ( leave blank)
    Click the correct Login button for your browser
    Click on ‘Device Management’or ‘For Administrator’
    Click on ‘Wireless Lan Settings’
    Type in your SSID, Authentication Encryption technique and Pre-shared key info that you wrote down
    Press Submit
    Then wait 30 seconds
    Disconnect ethernnet network cable from the camera
    Disconnect the power plug from the camera
    Reconnect the power plug to the camera ( do not reconnect the network cable wire)
    wait till camera stops moving
    Login back to the camera
    a)Double click on Ip camera tools
    b)Double click on camera’s Ip address
    c)User: admin
    d)Password: ( leave blank)
    e)Click the correct Login button for your browser
    15. Chec k to see if camera is working by clicking on to ‘Live video’
    Connecting your Camera to the Internet
    Write down the local IP address of your camera
    (To find this address open IP Camera Tools)( it will display the IP address of the camera as htpp://[YourCamerasLocalIPAddress])
    Write down your router’s external internet IP address
    ( The easiest way to find this would be to Google “What is my IP address” and go to the first link which pops up and that is usually whatismyipaddress.com)
    Log in to your wireless router
    To do this you must enter the IP address of your router into your browser(enter)
    and then enter the username and password when prompted.
    ( If you are unsure of the ip address or username and password of your router, SEE Finding your Router IP Address )
    Directing incoming connections on your external IP address to your cameras local IP address
    a)Go through the options( on left side) find ‘DMZ’
    b)Click on DMZ
    c)set the DMZ IP address (also called “private”/”local” IP address”) to your cameras
    local IP address(by changing the last component of the number to the last or last
    two digits of your cameras IP address)
    d)Select enable option
    e)Save by clicking ‘Apply Changes’
    OR If you have more than one camera
    a)click on “Virtual Server” or “Port Forwarding”
    b) set the inbound port to 80 and the outbound port to 80
    c) Save by clicking ‘Apply Changes’
    Test it to see if you set it up correctly
    open a browser and enter your external internet ip address into the address bar and press enter
    You should arrive at your camera’s login screen if you successfully connected the camera to the internet
    NOTE: Please keep in mind that the camera’s IP address and the Internet’s external IP address can change at any time. Check and make sure that the IP addresses haven’t changed. If they have changed, use the new IP addresses.
    Finding Your Routers IP Address: (Internal)
    Refer to your router’s manual OR
    Retrieve your Routers Ip Address from Ip Camera Tool software
    Double Click on your IP Camera Tool Icon
    Then left click once on your Camera’s IP address
    Right click on it and choose ‘Network Configuration’
    The ‘Gateway’ number is your router Ip address ( write it down) OR
    view a list of default router IP addresses, usernames and passwords
    by Google searching “default router IP addresses”
    and clicking on the PDF titled “List of default Router Admin Passwords and Default Router IP” at: http://www.answersthatwork.com/DownloadArea/ATW_Library/Networking/Network__4-List_of_default_Router_Admin_Passwords_an d_IPaddresses.pdf
    Go to ‘find’ and type in the brand name of your router (press enter)
    Write down your routers IP address
    Message was edited by: dollarbrand

  • Need help with multi track/simultaneous recording

    Please forgive me if the answer to my question has already been covered; I have searched the other posts but haven't been able to find the answer.
    I am recording a podcast with a Behringer Xenyx X1832 mixer. In GB I know how to select "multi track recording" and set my two mics that are conneced to the first two channels of the mixer to "mono 1" and "mono 2" on the input source.
    My question is how do I record audio from my Macbook on a seperate track?
    I have a Focusrite 2i2 connected via USB to the Macbook acting as an output, then TRS cables from the outputs going to channel 7/8 on the mixer. When I play audio I can hear it perfect and adjust EQ and volume, but I am unable to record it on a seperate track on GB.
    When I click on the track on GB, the input source says "stereo 1/2" and when I try to click the red buttons to arm the other two mono tracks where my mics are connected it says "The input channel of this track is already in use. To record on this track, choose another input channel."
    What am I doing wrong? How do I send audio from the Macbook to the mixer and then record it on a seperate track, along with seperate tracks for each of the mics?

    You need to create an aggregate device:
    http://support.apple.com/kb/HT1215

  • Need help with no camera sounds & recording in Captivate 5

    I am an experienced user of Captivate 3 & 4, but I'm having lots of problems with Captivate 5.  I am working on a Windows 7 OS and have just installed Captivate 5.  When I try to record I can't get any camera sounds, even though I have changed my preferences to show them.  Also, Captivate seems to be recording erratically, and sometimes it is catching actions, other times it isnt'  I am running the program as Administrator and I am very puzzled by this.  Normally Captivate has worked like a charm out of the box.  Now it seems to be fighting my every step of the way.  Am I missing something?
    Audio recording seems spotty too. Sometimes it works just fine, other times Captivate just hangs and doesn't really record any sound.
    Any help would be appreciated/

    Hello and welcome to the forum,
    First to be sure: did you install the patch released in December (Help, Updates...)? If not try that first of all. You can find details about the issues solved by this patch in this blog post:
    Patch for Captivate 5
    If this doesn't help, try to clear the cache (Preferences, Global).
    Perhaps (not sure) your Preferences folder has become corrupt. It so, try to find it. In Win7 normally it is a folder (Captivate 5)  in this path:
    \users\<username>\appdata\local\adob
    Maybe you will have to change the settings to make this folder visible in Explorer, by default it is in a system folder and invisible. You can delete this folder (while CP is closed) and when you restart CP a brandnew one will be created.
    Lilybiri

  • PLEASE help with multi-cam edit issue (head about to explode...)

    PLEASE believe me when I say I've watched 20 YouTube videos on the subject, read the manual, reinstalled FCS on a new machine (in the event that the install or my last MBP was at fault), etc., etc....
    JUST can't get FCP to make the cuts for me when I click on the angles in the viewer.
    Despite making a multi-clip, open synch, green/blue boarder for audio/video angle and blue boxes for video only, rendering, etc., the same thing always happens...
    When I hit the space-bar, making all the angles play @ same time in the browser, and then I click on an angle to make a real-time cut, the in-point of the selected angle pops onto the canvas (a still frame) and everything STOPS.
    Happy to describe any other details; can begin to tell you how stoked I'll be if I can get past this...
    (I've been reduced to trying to use iMovie to cut this 3 angle live-music performance video, which is taking HOURS for a single song...with terrible results...)
    :-/

    Starting over:
    1) Import 3 .dv clips (all same frame size, vid rate, compression, etc.)
    2) Create new bin for footage, assign angle numbers to clips
    2) Add in-point for synchronization
    3) Make multiclip (and synch in-points)
    4) Double-click on multiclip (and it then shows in viewer)
    5) Press "overwrite" to bring multiclip into timeline
    6) Open playhead sync
    7) Assign blue and green 'boxes' in viewer (audio/video, and video only)
    8) Click into timeline, make sure playhead is to the front of the sequence
    9) hit space bar to start editing.
    10) NOW, whenever I click on an angle in the viewer to make an edit, playback stops and a still frame for the selected angle shows in the canvas.
    ANY THOUGHTS??

  • Need help with multi-mapping

    Hello! I need to develop scenario like in blog: /people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
    but I need to have sets of records. For example, I have 9 "Element2" records in original message.
    So, I  need to have 3 messages, each contains 3 records of "Element2".
    How can I do this?

    Change the occurance of target message type to 0..unbounded in Messages Tab in mapping for 1:n mapping.
    Mapping for Piyush_msg_out_3 target node-
    Element2 (source)-> Index(increment 1) -> Divide by Constant (3 in your case) -> Floor -> Split By value(Value chnaged) -> collapse contexts -> Piyush_msg_out_3
    Change the occurance of Element2 node as 1..unbounded in target data type.
    Mapping for Element2-
    Element2 (source)-> Index(increment 1) -> Divide by Constant (3 in your case) -> Floor -> Split By value(Value chnaged)  -> Element2(target)
    Edited by: nagarjuna _s on Nov 5, 2009 7:41 AM

  • Need help with multi database query.

    Hello,
    I am working on a query between multiple databases to be view on a web app.  We have multiple web apps and we are integrating some functionality between them all into one page. 
    The data will be for a delegate someone sets for themselves (they can have more then one also).  I need a way to pull the data view it as follows.
    User, UserNumber, DelegateName, ForApp, ForApp, ForApp, ForApp, ForApp, ForApp
    I have had no problem pulling the delegates themselves and which apps they are a delegate for,  but not which person they are the delegate for.
    SELECT DISTINCT
    dbo.Employee.Position_Num AS Delegate_Position, dbo.Employee.Name AS [Delegate Name],
    (CASE WHEN Hierarchy.dbo.Employee.Position_Num = CVI_Delegate.Delegate THEN 1 ELSE 0 END) AS For_CVI,
    (CASE WHEN Hierarchy.dbo.Employee.Position_Num = Travel_Delegate.Delegate THEN 1 ELSE 0 END) AS For_Travel,
    (CASE WHEN Hierarchy.dbo.Employee.Position_Num = Dept_Deposits_Delegate.Delegate THEN 1 ELSE 0 END) AS For_DeptDeposit,
    dbo.OKCorral_Delegate.For_UserRoles AS For_OkCorralUR, dbo.OKCorral_Delegate.For_FiscalApprover AS For_OkCorralFA,
    (CASE WHEN Hierarchy.dbo.Employee.Position_Num = Reqs_Delegate.Delegate THEN 1 ELSE 0 END) AS For_Reqs
    FROM dbo.Employee LEFT OUTER JOIN
    Reqs.dbo.Delegate AS Reqs_Delegate ON dbo.Employee.Position_Num = Reqs_Delegate.Position LEFT OUTER JOIN
    DeptDeposits.dbo.Delegate AS Dept_Deposits_Delegate ON dbo.Employee.Position_Num = Dept_Deposits_Delegate.Position LEFT OUTER JOIN
    CVI.dbo.Delegate AS CVI_Delegate ON dbo.Employee.Position_Num = CVI_Delegate.Position LEFT OUTER JOIN
    dbo.OKCorral_Delegate ON dbo.Employee.Position_Num = dbo.OKCorral_Delegate.Position LEFT OUTER JOIN
    Travel.dbo.Delegate AS Travel_Delegate ON dbo.Employee.Position_Num = Travel_Delegate.Position
    This query works fine.  The problem I run into is I have to use the same Employee table to get the EmployeeName and Number
    Which will be used for both the person and the delegate.  Any ideas will be a great help.  It had been suggested I use a procedure to accomplish this, but I have no idea where to start that at.  I also have tried a nested sbu-query but since
    a person can have more then one delegate for an app,  this through errors.  Thanks.
    George Fields

    Ok,  here are the tables Travel Application Database/Delegate Table
    INSERT INTO [Travel].[dbo].[Delegate]
    ([Position]
    ,[Delegate]
    ,[StartDate]
    ,[EndDate]
    ,[CreateDate]
    ,[EditDate])
    VALUES
    (<Position, char(6),>
    ,<Delegate, char(6),>
    ,<StartDate, datetime,>
    ,<EndDate, datetime,>
    ,<CreateDate, datetime,>
    ,<EditDate, datetime,>)
    GO
    Requistions Application /Table Delegates
    INSERT INTO [Reqs].[dbo].[Delegate]
    ([Position]
    ,[Delegate]
    ,[StartDate]
    ,[EndDate]
    ,[CreateDate]
    ,[EditDate])
    VALUES
    (<Position, char(6),>
    ,<Delegate, char(6),>
    ,<StartDate, datetime,>
    ,<EndDate, datetime,>
    ,<CreateDate, datetime,>
    ,<EditDate, datetime,>)
    GO
    Heirarchy Database for Purchasing Application / Delegates Table
    INSERT INTO [Hierarchy].[dbo].[OKCorral_Delegate]
    ([Dept_Campus]
    ,[For_DeptNum]
    ,[Position]
    ,[Delegate]
    ,[StartDate]
    ,[EndDate]
    ,[CreateDate]
    ,[EditDate]
    ,[For_FiscalApprover]
    ,[For_UserRoles])
    VALUES
    (<Dept_Campus, char(2),>
    ,<For_DeptNum, char(5),>
    ,<Position, char(6),>
    ,<Delegate, char(6),>
    ,<StartDate, datetime,>
    ,<EndDate, datetime,>
    ,<CreateDate, datetime,>
    ,<EditDate, datetime,>
    ,<For_FiscalApprover, bit,>
    ,<For_UserRoles, bit,>)
    GO
    Heirarchy Database / Employee Table
    INSERT INTO [Hierarchy].[dbo].[Employee]
    ([Dept_Num]
    ,[Position_Num]
    ,[Email]
    ,[Name]
    ,[Campus]
    ,[CWID]
    ,[Student]
    ,[Employee]
    ,[OPID]
    ,[Gender]
    ,[Birth_Date])
    VALUES
    (<Dept_Num, char(5),>
    ,<Position_Num, char(6),>
    ,<Email, varchar(75),>
    ,<Name, varchar(150),>
    ,<Campus, char(2),>
    ,<CWID, varchar(16),>
    ,<Student, char(1),>
    ,<Employee, char(1),>
    ,<OPID, char(4),>
    ,<Gender, char(1),>
    ,<Birth_Date, char(8),>)
    GO
    The other two databases also have a delegate table similar to the ones above.  As you can see all information about an employee is linked by their position number in the Employee Table.
    The Position Number is used in the Position field and Delegate field of all the Delegate tables.
    I am needing to pull an employee (actually all of them) List them and then show delegates for them by which applications the delegate holds permissions too. Which is the purpose of the delegate.  So a delegate may only be a delegate for one application
    or multiple which is why I am pulling from multiple databases.
    George Fields

  • Need help with multi xy plot

    hi Labviewers,
    I'm using the the 'Plot multi-xy.vi' to display a frequency sweep and several limit lines. I got my app work today but when I finished I realized the display is too small.
    When I enlarge the window of the graph on my frontpanel only the size of the window itself changes but not the size of chart.
    I searched for an option but couldn't find it.
    Thanks in advance
    Simon

    The ouput of "Plot multi-xy.v" is actually a picture!
    You are just resizing the picture indicator, the size of the image is programmatically set.
    The VI has an input connector to set the size of the picture. Create a constant at the "dimensions (w,h)" terminal and enter the desired size in pixels(e.g. 400 and 400).
    Good luck!
    LabVIEW Champion . Do more with less code and in less time .

  • Need Help With Back Camera

    My back camera and flashlight does not work anymore for my iPod 5th gen. I have tried everything besides a factory restart. I have restarted it several times and restarted the software. Please help it's annoying me. Thanks

    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

Maybe you are looking for