Novice to Adobe video issue after encoding.

Hi
Im very new to Adobe Premiere Pro and Adobe Media Encoder so I realise it might be something I havent or have done to give me my problem.
Im attempting to create a Minecraft video for YouTube, Using Fraps as the recording program and Adobe Premiere Pro as the video editor.
My Adobe is the CS4 version
I have looked at tutorials and followed several different people that are using the same programs as I am but every video I make goes into Adobe Premiere pro good quality but after the Adobe Media Encoding is complete I get like a Motion Blur that was not seen any where during editing.
I was wondering if this was something I had done or not done, ive tryed many different settings both presets and custom found on the tutorials but what ever I do the final video has this Motion Blurr. Also when the final video has encoded it has like a grey film over the video rather than crisp, which I think is causing the issue.
I have included some settings that I am currently using but as I said it happens on all settings.
The specs that I am using are
Fraps:
Recording at 30fps
Screen Size 1920x1080
And for Adobe Premiere Pro
New project settings: are all default except the Capture format which I changed to HDV (Ihave also tryed DV with the same problem)
New sequence settings: HDV 1080p30
Adobe Premiere Pro Export Settings
Format is H.264
Preset is custom following the HDTV 1080p 29.97 High quality setting, these settigns are as follows:
Video Settings:
TV Standard: NTSC
Frame: 1920x1080
FPS: 30
Pixel Aspect Ratio Widescreen: 16:9
Profile: Main
Level: 4.2
Bitrate Settings are
Bitrate Encoding: VBR, 1 Pass
Bitrate Mbps is 8-8
Ive tried to include as much detail as possible.
Any Help would be appriciated thank you.

I'm not entirely sure how much difference this will make, but have you tried VBR 2 pass encoding? It'll take longer to encode but you should get a better result.

Similar Messages

Audio and video issue after Win 10 Upgrade - Split X2 laptop 64-bit

Any solution to the Audio and Video issues on Split X2 13" laptop after Windows 10 FREE Upgrade?? - Intel Core i5 processor- 4GB memory I'm sure others are have the same Audio/video problems: - there is Sound and video playback but the sound and video is repeated slowly forward....impossible to understand the audio. The video is clear but also being played in repeated frames as it moves slowly forward!- sounds coming out of the speakers ok - everything was working great on Windows 8.1 (before upgrading to Windows 10). there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until a real fix is provided?? Regards - VK

I have downloaded and installed the HP recommended IDT Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is: STWRT64.sys 6.10.6498.0 The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos. My Split 13 X2 product id is: E2S66AV BIOS F.27

Audio and (sometimes) video issue after Win 10 Upgrade - Split X2 laptop 64-bit

Any solution to the Audio and Video issues on Split X2 laptop after Windows 10 FREE Upgrade?? I'm sure others are have the same Audio/video problems: - very slow, Repeating audio and video on YouTube and Netflix playback....totally unwatchable- speakers work fine- everything was working great on Windows 8.1 there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until the real problem is fixed? Regards - VK

I have downloaded and installed the HP recommended IDT Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is: STWRT64.sys 6.10.6498.0 The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos. My Split 13 X2 product id is: E2S66AV BIOS F.27

Video issues after update - 15" Macbook Pro (Late 2011)

I recently ran some updates for my mac and ever since then, I've been having video issues where my screen is showing horizontal lines. The lines come and go as I make changes to the screen (like minimizing a window) and they came in go and varying degrees of badness. Icons will also start missing unless I hover over them or make some other video change in that area of the screen.
It could be a coincidence that it occurred after making the updates, but it is worth noting.
OS: 10.7.4
Model: 15" 2.2Ghz Intel Core i7, 4 GB, Late-2011
Graphics: AMD Radeon HD 6750M 512MB
Possibly related:
https://discussions.apple.com/message/2652280#2652280#2652280
Why is this happening?

Users with the same issue:
http://www.ifixit.com/Answers/View/23725/My+MacBook+Pro+17+freezes+and+lines+in+ screen!
https://discussions.apple.com/thread/1609243?start=0&tstart=0
https://discussions.apple.com/thread/2457853?start=0&tstart=0
Anyone?

Ichat Video issues after update

Hello, this is my first post so apologies if i mess anything up. My iChat has suddenly lost video chat capabilities. After perusing the forums i was unable to find a solution to my problem so i'm hopeful that someone can help me out. So far what i've been able to determine is that its saying "This computer does not support video chats" and "Slow Network" I found this odd since i had been using video chats just 24 hours earlier. I still have audio chat capabilities though. I did install a new update on my mac in that time so i didn't know if that was the cause of the issues. I am now running iChat 5.0.3 (745) and OS X 10.6.7. I have checked my download and upload speed. DL= 25.15 Mbps and UL=11.94 Mbps which i've gleaned should be more than enough. If anyone has any idea's why this is happening or how to fix it i'd welcome them.

Hi,
At iChat Launch it will check the hardware configuration and what Internet speed is available.
The speed is written to the com.apple.ichat.plist and is used as the basis for all iChat version after that (During the time iChat is still Open)
Starting up iChat whilst the computer is doing a download will effect this.
Same if another computer on the same router is using the internet heavily (Consider On-line games on Game Consoles).
Also getting iChat to Launch On Login to the Mac may get the app to start faster than it can Establish an Internet Connection (waking form sleep is prone to this) but maybe influenced by other apps starting and using the 'Net for Update checks.
Upload speed is the crucial one.
This should not be below 128kbps ("Real World" consider 256kbps)
A restart of iChat will most likely sort this.
If it persists delete com.apple.ichat.plist form your Home Folder/Library/Preferences (Drag to Trash)
Restart iChat after this and the .plist will be recreated from defaults.
This will mean that all your changes to anything but the accounts section of the iChat Preferences will be back to Defaults (Saved Transcripts, Font, Colour IM Colour etc.)
10:19 PM Monday; April 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Adobe Professional issue after trial

Hi All,
One of my end-users has an issue with Adobe Professional.
We have Pro 9 installed, and he recently wanted to try out Pro 11. We installed the trial and after the trial period we uninstalled it.
Since then he has been having issues with Pro 9. Mainly he uses it in collaboration with AutoCAD. The main issue he has is when trying to print to PDF from AutoCAD, it says that the print job failed.
We have uninstalled and reinstalled Pro 9.
Is there a way to completely remove all traces of Adobe so I can install Pro 9 from complete scratch? or has anyone seen this issue before?
Regards,
Hatfield

Hi Daniel,
Please tell me which OS version are you using.
Also, let me know whether you are able to successfully access other features of Acrobat 9 or face any trouble.
Please share the screenshot of the error message as I need to analyze the exact problem.
You might install Acrobat cleaner tool "Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs" to remove all traces of this software and then again install Acrobat 9:
Hope to hear from you.
Regards,
Anubha

Video issues after OS update

After I upgraded to OS 4 on my iPad, I can no longer view videos that I have posted on Facebook. These are not flash videos. They are iPad compatible and I have been able to view them fine up until the upgrade. Anyone else have this issue? I can't find anything anywhere. I get the error "flash player required to view this video".

michellelovett67,
I am so sorry to hear of the issues you are having with charging your device since the update. Have you tried to hard reset your phone and test after the reset? http://vz.to/PTQNYF Let us know if this helps.
LindseyT_VZW
Follow us on Twitter @VZWSupport

Video Issues After OSX 10.5.6 Update

I've installed the update via Software Update and now 1080p HD video on apple trailers using the 9600 on my new MBP (2008) is choppy and quicktime video on the apple site is flickering from time to time whereas the image is replaced by a white flicker from time to time.
Any Suggestions ?

I am also having the same exact problem with 1080i/60 DVCProHD material and my ATI 9600 card. I can get my external video to work only when showing 1/4 quarter frames. I can get the timeline video to run smoothly if I turn off external video--but of course that's not acceptable.
ATI says since everything worked in Tiger it's a driver issue and that's Apple's problem. Did you find a solution?

Using Adobe Media Encoder to create H.264, MPEG-2, and WMV videos from After Effects - 6/23/14

Very disappointed with this choice. I will definitely be seeking to uninstall this version and go back a version or two. Two many extra steps to export an mp4 now. And now we also have to wait longer for a mp4 to render and can't take advantage of the machine's hardware? You guys fighting mp4 as a standard, forcing us to an additional product, or what? I'll be sharing my extreme disappoint with this 'upgrade' with the rest of the developers at work and who just had it installed. I'm not seeing this being too popular opn social media either. Seems like you only did what was best for you.Thanks for showing us who's boss.

Frank VA wrote:
And now we also have to wait longer for a mp4 to render and can't take advantage of the machine's hardware?
Not necessarily. You can render an intermediate codec with AE's render queue (thus using all of AE's power to render) and then drop that file into the Adobe Media Encoder.
This was the workflow I've always used - even when AE could encode with MP4. Why? Well, because AE sucked at MP4 encoding. You couldn't even do multipass endoding with it!
This is a useful workflow in a few ways:
1. You have an archive-quality file to come back to in the future.
2. You can use AE's full power to render.
3. You can use AME's superior encoding capabilities.
4. You can tweak your compression settings and try various encoding parameters to improve the quality while decreasing the bitrate of your product WITHOUT having to re-render the AE comp every time you try since you're working off of the intermediate file. I mean, imagine a comp with several 3d layers, depth of field, shadows from multiple lights, and 250,000 particles from Particular. What if you made an MP4 and then the client needed a smaller file size or the MP4 you made was too heavily compressed and you needed higher quality? I don't know about you, but I'd much rather only render that 18-hour monster once.
This workflow actually saves time for many people.
And, in any workflow, this produces a better product.
Again, this is what I did even when AE could encode MP4's.
Frank VA wrote:
You guys fighting mp4 as a standard, forcing us to an additional product, or what?
They aren't fighting MP4 as a standard, in fact, when Adobe folks pop in here and answer questions, that's often their recommendation for delivery codec.
Frank VA wrote:
Seems like you only did what was best for you. Thanks for showing us who's boss.
Listen, I understand your frustration. Knocking out a quick compressed file from AE for client review is handy.
However, maintaining the h.264 encoding in AE took up development time. There are only so many person-hours per week for the (relatively tiny) AE team to spend on building each version of AE.
I never liked AE's h.264 encoding - AME has always done a superior job. Since we have AME to do our encoding, I would rather the AE team focus their effort on improving AE as a compositing and motion graphics tool rather than as an encoding tool.
Again, I get the frustration. I can see where it feels like they are doing what's good for them and not us, but I think, in the long run, this way is better for us. Right now, the majority of the AE team is working on making AE faster to work with and faster to render. The sooner we get a relatively bug-free version of that, the better! (Especially for folks on Mac OSX Yosemite who can't RAM preview smoothly in any version of AE).
And at least the After Effects team has been very transparent about things - for example, this blog post talks about their reasoning: using Adobe Media Encoder to create H.264, MPEG-2, and WMV videos from After Effects

Set the Moov in the begining in the mp4 video in after effect or using adobe encode ?

is there a way to set the Moov in the begining in the mp4 video in after effect rendering or using adobe encode, so it can fast start in web or mobile application ?

running After Effects in English, even if you’ve installed and activated it in another language

Very poor video quality after transcoding in Adobe Encore CS5.1

MERRY CHRISTMAS AND A HAPPY NEW YEAR!
I have very poor video quality after transcoding the video file (MPEG) in Adobe Encore CS5.1. Below you see my used settings in my filmproject.
The problem exists after transcoding in Adobe Encore CS5.1. I checked all steps and found out that there is no problem until transcoding. My exported file in MPEG has very good video and audio quality.
Facts:
1. Camcorder: Panasonic AG-AC160AEJ
Operating System : Windows 7, 64 Bit, Ultimate edition
Source files: MTS files
Recording settings (clip settings):
Type: MPEG Movie
Image Size: 1920 x 1080
Frame Rate: 25,00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Pixel Aspect Ratio: 1,0
2. Sequence settings in Premiere Pro
Sequence was created from Clip directly with settings above.
3. Exporting settings in Adobe Premiere Pro:
Match sequence settings was activated. Now other changes were set.
4. Exported File:
Video
Image Size: 1920 x 1080
Data Transfer Rate: 25920 kBit / s
Frame rate: 25
Audio:
Bit rate: 384 kBit / s
Channels: 2 (stereo)
Frequence: 48 kHz
5. Transcoding settings in Adobe Encore:
I used different transcoding settings such as automatic DVD Transcoding, CBR and VBR.I also set “use maximum render quality”. But all results were always the same: very poor quality.
Why does the encore transcoding cause such bad video quality?
How can I solve this problem?
Please help me soon.
Best regards.

Hi Ann,
1) I did not only „Automatic (based on source)“ options in my tests, but also many other customized options.
The results are very poor. I have done a new test with the following settings. The result is also poor:
Download link: http://www.klavierlehrer-bayern.de/download/test_mpeg2dvd_1.m2v
Export Settings:
Format: MPEG2-DVD
Preset: Custom
Codec: MainConcept MPEG Video, Quality: 5
Frame Rate: 25 fps
Field Order: Upper
Pixel Aspect Ratio: Automatic (based on source)
Render at Maximum Rate: [active]
Bitrate Encoding: VBR, 2 pass
Minimum Bitrate (Mbps): 5
Target Bitrate (Mbps): 9
Maximum Bitrate (Mbps): 9
GOP Settings
M Frames: 4
N Frames: 12
Use Maximum Render Quality: [active]
Multiplexer: None
2) Why shouldn’t I use the “Match Sequence Settings” in exporting? Because of the big output file size?
I used it and the results are very good as I expected:
Download link: http://www.klavierlehrer-bayern.de/download/test_MatchSequenceSettings.mpeg
Export Settings
Match Sequence Settings [selected]
1920 x 1080, 25 fps, Upper, Quality 50
User Maximum Render Quality: [active]
3) I tried also Dynamic Link in PremierePro (to Encore).
The results are also poor.
4) I will test also LagarithLoslessCodec and frameserving +DGMPGDec. But the video is vertical long drawn-ot.
I think I did not use it correctly.
Regards

Video Issues in Adobe Presenter 9

Video issues - I have inserted a 3 minute video in a Presenter 9 file and it plays fine when previewing but only 6 seconds when published. Plays 6 seconds and then buffers. I have tried inserting different formats and still get the same results. Anyone else have this issue or ideas on how to resolve?

Hi there,
I got a solution from the Adobe Captivate technical team.
As an attempt to resolve your issue
Uncheck the option “Accelerate 3D graphics” under VM Settings by going to VM >> Settings >> Display>> 3D graphics
Once done please try capturing and hopefully this must resolve your issue
I did this and it worked, yeah. However, it is still incredibly frustrating using VMWare, when I am recording using Presenter it keeps freezing and I have to shut the entire system down. Guess I'll try the Partition!!!
Thanks again

Adobe Media Encoder CS4 White Overlay after encoding

For some reason, when converting a .mov to .mp4 in AME, after encoding, the .mp4 video appears to have a white transparent (~50%) overlay after about 3 seconds that persists until the video ends. The beginning looks fine, but the overlay appears and the video is ruined. The white is NOT in the original.
Original video specs:
11 second .mov, 1196px X 528px (non standard dimension, I know, video created from microscope, but plays perfectly on several systems, Mac/PC)
No Audio
Encoding to:
.mp4
H.264
600px X 265px (same aspect ratio)
24 fps
Field order: None (Progressive)
Pixel Aspect Ratio: Square Pixels
No audio, No filters
Is there something I am missing? Been at this for 2 days, its driving me mad!

What player(s) show the white overlay, and on what operating system & version? Can you give us access to sample clips (original and AME encodes) or at least post screenshots?

I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'

I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'

Hi
Uninstall the Adobe Application manager from your computer.
and download the latest version of the AAM from the below mentioned sites.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774- For Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773 - For Windows
Once installed , Then try to update the application by launching the application and Help--> Update
Hope It Helps
Thanks

Adobe Flash Media Live Encoder 3 - Video Hardware Acceleration Warning

I have been looking for an answer for this error for a few days without any luck.
I just loaded the Adobe Free Encoder 3 and the Flash Media Server (Free Version) on a Dell PowerEdge 1950 running Windows 2003 server standard edition with Service Pack 2. The computer has an Intel Pentium III Xeon 2.66GHz Quad core processor with 4GB RAM. I am using an Osprey 240 video capture card.
The computer was previously running Windows Media Encoder and it was working fine, but I needed to upgrade to a flash stream.
Whenever I start the Adobe Flash Media Live Encoder I get the following error:
"The video card's hardware acceleration level is set too low. Open the Display Properties, Settings tab and click Advanced, then select the Troubleshoot tab and increase the Hardware acceleration setting. Then restart the application, etc...
I did as instructed and it did not work. I also tried changing the display settings to lower and higher resolutions. I also updated the video card to the latest drivers. I double checked the hardware requirements. http://www.adobe.com/products/flashmediaserver/flashmediaencoder/systemreqs/ and it looks like I'm ok.
I also checked the approved hardware list http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.0.pdf.
The Osprey 240 is not listed, but that seems to be working fine.
I'm thinking that the internal video card that I have may not be compatible with the Adobe Encoder. The video card that I have is an ATI ES1000 embedded video that has only 16MB of RAM.
I have the latest version of DirectX - I ran DxDiag and it shows that I'm running DirectX 9.0c (4.09.0000.0904), Under the Display tab it says that the DirectDraw Acceleration, Direct3D Acceleration and AGP Acceleration are not available.
Any help would be greatly appreciated.
Thanks.
Anthony

http://forums.adobe.com/community/flash/flash_media_live_encoder

Novice to Adobe video issue after encoding.

Similar Messages

Maybe you are looking for