Now all clips/files in multitrack screen automatically begin time stretching if boundaries are adjusted - WHY?

I am in the middle fo a large multitrack session with about 40 different tracks and now if I try to adjust the boundaries of a clip - any clip, it begins to time stretch automatically - even when the clip si not set up as being looped!. Is there a setting that causes this? Can it be fixed or is it just another AA3.0 bug? Help! - This session has now become extremely diificult especially if I adjust a clip boundary and that clip starts some knid of mysterious self-generated time stretching.
Any help is greatly appreciarted
David

Suite Spot wrote:
I'm not at the studio at the moment but if I recall you would need to uncheck 'Enable Clip Time Stretching" under the 'View' menu option.
I'm pretty sure locking the clips in time will do the same thing.
Can confirm that this is indeed correct...

Similar Messages

Updated to iMovie version 10.0 Opened it. All my clips and projects were there. Then it crashed. Now no clips no projects. If I try and import them they are dimmed. If I try and 'update projects and events' a dialogue box says no files found.

Have macbook pro 2012, running Maverick. Updated to iMovie version 10.0 Opened it. All my clips and projects were there. Then it crashed. Now no clips no projects. If I try and import them they are dimmed. If I try and 'update projects and events' a dialogue box says no files found.
Have tried restarting computer, no joy. Help!!

The reply from Nerval fixed it. It is very simple and it works.
If you have a lot of Projects and Events, leave the iMovie running for a long time. I had 160G and it took 4hrs. It is doing it in the background so don't shutdown too quick.
Thanks Nerval.

I exported an indesign file as a pdf saved to my desktop, now all indesign files on desktop are turned to pdf. HELP PLEASE

I exported an indesign file as a pdf saved to my desktop, now all indesign files on desktop are turned to pdf. HELP PLEASE

If you are using Mac, press Apple + I to get the information. It show a table. There is a section call Open with. Change the file with pdf icon to open with indesign. If using PC, just click on the second button on the mouse and open with Indesign.

HT201210 i updated my iphone and now all i have on the screen is the itunes icon

i updated my iphone and now all i have on the screen is the itunes icon

1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
NOTE:
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

HT201263 itouch was updating software and failed, now all i have is a screen showing usb plug and itunes logo,cant reset or restore.help

itouch was updating software and failed, now all i have is a screen showing usb plug and itunes logo,cant reset or restore.help

Type "unable to restore" into the search bar at the top of this page by Support and read the resulting help article

I have an iphone 3gs. It was jail broken. I reset it back to factory settings and now all I have on the screen is the apple logo.I have hooked the phone up to itunes but nothing is happening.What do i do.Can someone help???/

I have an iphone 3gs. It was jail broken. I reset it back to factory settings and now all i have on the screen is the apple logo.I have hooked the phone upto itunes but nothing is happening. What do i do? Can someone help please???

Sorry, due to the Terms of Use problems with jailbroken devices can't be discussed here.
You can only get help from those people who told you to modify the software, only they know what the jailbreak did to the firmware.

HT4623 i turned my ipod off while it was udating the software (oops) now all it shows on the screen is a picture of the cord with an arrow pointing up to itunes. please help.

i turned my ipod off while it was udating the software (oops) now all it shows on the screen is a picture of the cord with an arrow pointing up to itunes. please help.

What happens when your connect the iOS device to your computer and restore via iTunes.
Try DFU mode and then restore if necessary.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

I updated my iMac to Mountain Lion. All the files were deleted. I have Time Machine backups. When I restart the mac pressing Command R to restore from backup it shows the previous OS X (Leopard) beside the date of the backup. Will it go back if I restore?

I updated my iMac to Mountain Lion. All the files were deleted. I have Time Machine backups. When I restart the mac pressing Command R to restore it from the backup it shows the previous OS X (Leopard) beside the date of the backup that I want to select. Will it go back to Leopard if I restore it from the backup?

No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
After you restore from TM, check HD > Incompatible Software

My ipad battery ran out while verifiying the last update. Now all I see on the screen is the plugin symbol with an arrow and the itunes symbol. Help!

Help, as above, lost power part way though verifiying last update.
Now all i see is the plugin symbol with an arrow, and the itunes symbol
in the middle of a black screen.
Does anyone have any ideas? I've tried powering down, with no luck.
Help, please, or should I just box it up and send to repair center?

CREEEP wrote:
Now all i see is the plugin symbol with an arrow, and the itunes symbol in the middle of a black screen.
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

My mac book air did a update and now all my files are gone, what do i do ?

how do i restore my files that were not saved on icloud? my mac did an update on ox mavericks and now everything my files,pictures,music is gone. how do i get it back

The iphone is designed to be synced to your computer regularly. Your contacts will be in whatever program you have chosen to sync. Just sync them back

My friends hard drive failed on his 2009 macbook pro and he bought a new hard drive. we installed the hard drive and now all we get is white screen.

the macbook will not boot to the boot disc, or into startup disk control menu. is there anything else possible that we can do? we are slightly experiencvecd when it comes to these types of repairs. but this is baffling us.

We have tried this and it still goes to the white screen. One time when we were trying to boot from the disc (by holding "c" directly after the boot sound) we got a folder icon with a question mark in it. But it will not boot from the boot disk or go to the boot menu when you hold the option key upon boot.

Clips shift position on timeline when using time stretch

Premiere Elements 10, Win 7 x64,
I put together a timeline that had four video tracks. When I added a fifth track I started having problems. Specifically, when I put a still image or video clip onto the fifth track and then used time stretch on that newly added clip, the existing clips on the third and fourth tracks shifted their position on the timeline in response to the time stretch applied to the clip on the track above. Why does this happen? I would expect the clips on the lower video tracks to NOT move position in response to a time stretch change to a clip on a track above. How I can I get them to stay put while manipulating the duration of clips on the tracks above them?
Thank you for any insights.
I have attached three images to make what I am experiencing more clear than perhaps my words describe above.
(top) Image 001: timeline before any change
(middle) Image 002: timeline after adding video track 5 and adding a still image to that track
(bottom) Image 003: timeline after applying time stretch to the still image clip on track 5, showing shift of clips on tracks 3 & 4

When Adobe was designing the operations on the PrE Timeline, it was determined that the majority of users WOULD want the Ripple. That does seem to be the case. The addition of the Ctrl/Cmd modifier key accommodates those users, or those instances, where the Ripple is not desired.
Interestingly, PrPro, PrE's "big-brother" does things in the opposite order. The user holds down the Ctrl/Cmd key to GET the Ripple. The designers figured that the users of PrPro would have different desires, than those of PrE. As I use both programs, I have to keep reminding myself which program I am using at that time - to get the Ctrl/Cmd modifier key working, as I wish, in each program - just the opposite of each other.
Good luck,
Hunt

How Can I set QT to open ALL files in Full Screen Automatically?

Am I missing something obvious here, or is this a major option missing in preferences of QT? I know that you can set this option for EACH movie in the Presentation tab in the movie's Properties, but I have 1000's of clips on my computer. I just want EVERY movie to automatically open up in full screen mode. This seems like it should be an obvious universal option for QT rather than handled individually for each file (with the option to over ride it per file if you wish for some reason).
Plus setting the option per file is not even practical, because in order to save that option in a file that is not .mov file QT wants to convert it to .mov and save copy of the file...

I am still pretty sure, say 95%, (do not recall perfectly - to many things on my mind... hihi) that the settings in Quicktime in the Preferences DID work before.
QT Player "Preference" settings only control how the content is displayed in the "Full Screen" mode -- not how it is activated. Pop-up options include:
1) Half Size,
2) Actual Size,
3) Double Size,
4) Fit to Screen,
5) Fill Screen,
6) Panoramic, or
7) Current Size
The options are available individually for "widescreen", "standard", or "other" aspect movie formats. The only other method of I can think of using the QT Player to automatically open in the the "Full Screen" presentation mode would be using a QTL file linked to your original source file but it setting the "Full Screen" option is "boring" for you, then creating QTL files would be even more so.

Recently when clicking on Safari, it refused to open saying there were some components damaged. It was suggested I backup, remove OSX and reinstall. Now all I get is white screen and apple logo when starting. What to do?l

I Have an iMac desktop purchased in 2010 with OS X 6.1.6 and Snow Leapard. Recently after starting up, I was not able to open Safari. I checked for updates and all was well. I tried again and got a message saying Safari could not be opened because some components were damaged. After using Disk utilities to try and repair, it was suggested I uninstall OS X and reinstall from the disk. I did not at the time because I wanted to backup some info to a USB drive. But now when I startup all I get is the white screen and Apple logo and the loading symbol. What happened and How can Imfix it? I am not very tech savvy and don't know where to turn!

Hi nancy mfromamity harbor,
Welcome to the Support Communities! It sounds like reinstalling the Snow Leopard operating system is your next step. This should not affect the documents and data that you currently have on your iMac. I'll include the information to show you how below.
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
Note:To reinstall Mac OS X from another computer on your network, see:
Using another computer’s DVD or CD drive
To reinstall Mac OS X:
Insert the Mac OS X installation disc and double-click the Install Mac OS X icon.
Follow the onscreen instructions. In the pane where you select a disk, select your current Mac OS X disk (in most cases, it will be the only one available).
If you want to control which parts of Mac OS X are installed, click Customize, and then select the parts you want to install.
To start the installation, click Install.
If you purchased a standalone version of Mac OS X, these installation instructions are in a PDF file located on the Mac OS X installation disc.
If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer (including Apple software, third-party applications, and other printer drivers), refer to the documentation that came with your computer.
If you need to reinstall Mac OS X and you’ve been using Time Machine to back up your applications, files, and user settings, you can easily restore this information from your Time Machine backup disk after you’ve reinstalled Mac OS X.
Nancy, here is the contact information if you need technical assistance to get your iMac up and running.
Intel-based iMac - Contact Support - Apple Support
http://www.apple.com/support/imac/intel/contact/
Good luck!
- Judy

After downloading itunes, I hooked my iphone up to my computer and told it to restore. Got an error message, 1015, and it wouldn't restore my phone so now all I get on the screen is a pic of a usb port and an image of itunes. Anyone know what I can do??

can anyone tell me how to restore my iphone? Itunes will not let me and now my screen just has a usb port and itunes on it?

Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple.
What this means is you have to delete your .ipsw file (it may be corrupted or old) and attempt to restore your iPhone again.
Where the .ipsw file is found:
Mac                         - ~/Library/iTunes/iPhone Software Updates
Windows XP           - C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
Windows Vista/7     - C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates

Now all clips/files in multitrack screen automatically begin time stretching if boundaries are adjusted - WHY?

Similar Messages

Maybe you are looking for