Now I have updated, my explorer page in Windows will not open/

I have updated mavericks. I run Windows 7 using Fusion 4. Since updating my explorer page willno longer open and I am unable to use the net using my Windows 7 system. It was working perfectly before updating. Is this something to do with the update. How do I remove mavericks?

Most likely a problem with Fusion 4 compatibility with Mavericks (it only is fully tested up to Lion). The latest version, Fusion 6, is what you should be using with Mavericks to be sure that all works well.

Similar Messages

Hi, I am using a iphone 3g and i did not update it for 4 years now i have updated the software and the phone is not connecting to itunes with the error flashing error 11556

Hi, I am using a iphone 3g and i did not update it for 4 years now i have updated the software and the phone is not connecting to itunes with the error flashing error 11556

https://discussions.apple.com/thread/4977025

I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

No Japanese carrier provides unlocking services. Therefore, your phone must have been hacked to unlock it. That hack was removed when you updated the software. You need to be a legitimately unlocked phone.
Best of luck.

I downloaded Yosemite and now my iPhoto has a bar across it and will not open. I need to update to the latest version. The app store says the latest version is not available in the Canadian Store. What can I do.

I downloaded Yosemite and now my iPhoto has a bar across it and will not open. I need to update to the latest version. The app store says the latest version is not available in the Canadian Store. What can I do.

Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

I just bought a nano and am trying to sync to itune on my mac. It tells me I need the latest version of itune. when I try to donwload this it tells me I need a new OS. I have updated both and my nano still will not sync. Any suggestions?

I just bought a nano and am trying to sync to itune on my mac. It tells me I need the latest version of itune. When I try to download this it tells me I need a new OS. I have updated both and my nano still will not sync. Any suggestions?

Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers.

After recent update to my macbook pro itunes will not open, it just bounces when I click on it

fter recent update to my macbook pro itunes will not open, it just bounces when I click on it

Means they are going to mess up your iPhoto Library pictures database so it's unreadable by older versions of iPhoto on older OS X operating systems.
You have the choice to right click on the iPhoto Lbrary and inside is a folder called Origianls, use the Finder to Duplicate this folder, then move the OriginalsCopy out of the iPhoto Library folder and save it elsewhere.
I dont' think Apple will every intentionally touch the originals, however it's possible they could.

I right click on link, click, open in new window, then nothing happens. Or, windows within a page will not open, for example, on gmail, when I click "details" the window will not open.

When I right click on a hot link, then click, open in a new window, a window will not open. Alternatively, I can click, open in a new tab, and a new tab will open. Additionally, if I'm at a website with a chat feature, the chat window will not open, or, as another example, if I'm at gmail, and I click "details", the window that opens giving the summary of when your account has been opened and the IP addresses it's been accessed from, will not open.
I have on the computer, Aurora too. I doubt that it's a source of the problem, but I had to throw that into the mix. For clarification, this problem is happening while using the Firefox browser.

You can middle-click a link to open the link in a new tab.
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I just updated my phone and my apps will not open

i just updated my phone and my apps will not open

I cannot send shortcuts for apps to the home screen since updating with iOS7. Any suggestions?

I have a new nikon D610. PS will not open the NEF files. it will not allow me to upgrade to ACR8.3R

I have a new camera - nikon D610
PS will not open the NEF files
PS tells me I have the latest version
ACR 8.3 will open the files but the system will not allow me to upgrade to ACR 8.3
What do I do?

anyone?

Pages and Numbers will not open my iCloud files until I restart my Imac.

Pages and Numbers will not open my iCloud files until I restart my Imac.

Welcome to the Apple Community Lloyd.
Please tell us the versions of everything you are using.

After the Aperture update this week, the app still will not open!!!!!!

After the Aperture update this week, the app still will not open!!!!!!

If you want us to be able to help, we will need a little bit more information.
What exactly happens, when you try?
Do you get an error message, if yes, what is the message?
Does Aperture hang or crash? If it is crashing, post the crash log here - copy and paste the first 60 lines of the crash log into your post, not a screenshot please.
Regards
Léonie

After hard drive crash, Pages app brought over, and upgrade to snow leopard installed, Pages would not launch. Re-downloaded the 3.0.3 update and Pages launched, but will not open any documents or start new document.

After a hard-drive crash, Pages application was brought over from the old hard drive, and upgraded to snow leopard. However, Pages would not launch. I do not have the disks and the computer was given to me by my son with iWork 08 installed, so I do not have the ability to re-install using Purchases. I re-installed the update 3.0.3, which I already had, but thought it worth a try. That enabled Pages to launch, but it will not open a new or old document. I can see in preview the document, but it will not open. Any suggestions besides repurchasing Pages. I've just put out a lot of money for a new hard drive and retrieval of apps and docs from the old hard drive and would like not to have to put more money in it.
Thanks for any suggestions.

You can not simply drag over Pages, particularly if it was perhaps damaged in a crash.
As it was only Pages '08 it may be time to upgrade to Pages '09 from the App Store. It is not that expensive and will allow you to install it on any Mac sharing the same Apple I.D. and protect you from a repeat of this problem.
There are free alternatives to Pages if you are hard strapped, it depends on what you are using Pages for, it is not the only option by far.
Peter

I have updated Flash Player but it still will not play videos etc. Any clues what i have to do?

I suddenly have troublewith playing videos on Firefox - and have uninstalled and reinstalled but still it will not work.
Any clues what else i need to do?

Which version of Flash did you reinstall? 
IE uses the ActiveX version, where other browsers need the Plugin version of Flash.
Here's the "drill" for installing Flash for Firefox.
1.Download the Flash Plugin version setup file from here: 
[http://download.macromedia.com/pub/flashplayer/current/install_flash_player_32bit.exe Adobe Flash - 32-bit Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Ps CS5 "Print Page Setup" dialog will not open

Hello: I was printing via my Photoshop CS5.
I accidentally created a paper size of 0cm x 0cm and attempted to print (up to this point Photoshop and Print worked).
I now (permanently) get an error message: "There was an error opening your printer. . . "
Photoshop >File >Print. . . will not open the Print Page Setup.
Photoshop >File >Print one copy (works, but still tries to print 0cm x 0cm, the printer spits out a blank page).
Using the (Mac/Apple) app 'Preview' I deleted the paper size preset '0cm x 0cm'.
apps; Preview, Text Edit, Mail, Word, . . . all print properly (they can open the 'Print Page Setup' dialog).
I set up two other printers (now three in total) and they work with all applications (except Photoshop).
I uninstalled and re-installed Photoshop and my printers, including all their preference files.
Also, I again deleted Photoshop preference files by opening Photoshop while pressing 'Shft-Opt-Cmd'.
In 'System Preferences' >Print & Fax >Printers; I reset my computer's "Printing System".
I repaired 'Disk Permissions', Safe Boot and have also done multiple restarts.
Since only Photoshop has a problem, I believe Photoshop has (somewhere) set a preference thinking it's default paper size is 0cm x 0cm which is throwing an error and preventing the 'Print Page Setup' from opening.
I updated Photoshop Adobe Air, Printers, . . . after re-installing.
I ran an app that clears my computer's caches.
I reinstalled (and updated) my computer's operating system (OS only, not my account and data).
I would appreciate your help. Thank-you, M_L_R
Mac OS: 10.6.8, Apple/MacPro 2009, 2 x 2.93GHx 8-Core processors, 16GB of Ram (DDR3 1066 MHz)

Hello: I repaired my (Print: Page Setup. . . dialog panel will not open) problem.
The fix was one of the many suggestions I researched in the 'Adobe Help'.
    Unfortunately I dismissed this solution (until now).
    reference: http://helpx.adobe.com/photoshop/kb/error-install-printer-photoshop-cs4.html
        see >Solution 7: Create a different user account and run Photoshop as that user.
Some of the (following) procedures may not be necessary, but the core solution is in there. . .
    Mac OS X v10.5 or later >System Preferences >Accounts >Guest Account (sharing only) >Allow guests to log in to this computer >Automatic Login (for Administrator, still active - optional) >then log out of the (main/administrator) account >then Log in to the guest account >go to the applications folder (in the guest account) >open Photoshop >create a new simple document (example: create one text letter) >Print. . . (in this situation Print: Page Setup. . . the dialog panel opens [remember: this is the error problem in the main account]) >(do what you normally do) select your printer >set up a page size and printer options >print. Save that Photoshop project >delete that Photoshop project >Log out (of the Guest account) >Log in to your regular (main/administrator) account >the Guest account can now be deactivated (optional) >open Photoshop (in your main account) >test print a simple document >the (Print: Page Setup. . .) dialog panel now opens >(do what you normally do) select your printer >set up a page size and printer options >print. Save that Photoshop project >delete that Photoshop project >the (Print: Page Setup. . . dialog panel will not open) problem is repaired. Bye for now, M_L_R

Pages 2.0 will not open files

I just updated Pages in IO7 to version 2.0. Now I am not able to open all of my documents. How can I open these document.

iCloud is on. It seems like just one file will not open. I last wrote in the file on my iPad. I am not able to open the file on my IPad, iPhone,,or on my Mac through the cloud.

Now I have updated, my explorer page in Windows will not open/

Similar Messages

Maybe you are looking for