Now it is not recognized!!! Help!!!!!

My iphone had an error during the update. Now it is not recognized and you can not downgrade. Appears only when you connect the Apple logo and nothing else. Help please.

What shows up on the iPod's display when you have it connected to your PC?  Have you tried resetting the iPod with it still connected?  To this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
Otherwise, try rebooting your PC, opening iTunes, and then reconnecting your iPod to a high powered USB 2.0 port.
B-rock

Similar Messages

  • I just changed my password in youtube account and now it is not recognizing the new password can someone help?

    I just changed my password in youtube account and now it is not recognizing the new password can someone help?

    Well, mobile me was elimated over the summer.
    http://www.apple.com/support/mobileme/

  • When I was restoring my iphone4, at the end of restoring the settings an error occured and it turned off by itself and now it is not recognized by the computer or by the itunes, what to do?

    Hey guys
    When I was restoring my iphone4, at the end of restoring the settings an error occured and it turned off by itself and now it is not recognized by the computer or by the itunes, what to do?
    thanks

    A device that has been jailbroken cannot be discussed on these Communities...Apple will not help you as that voids your warranty.

  • TS1363 "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    Hi cueball819,
    Thanks for using Apple Support Communities.  This article has steps to try if your iPods aren't recognized by iTunes or Windows:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • My iphone 4s can not activate it,  it was not recognized. help!

    I bought an iphone 4s and can not activate it, an image appears saying that it was not recognized. help!

    I'm from Brazil, but I bought my iPhone in the U.S.. the message appears both on the phone and the computer. the message is: "we're sorry, the iphone you connected is not recognized and cannot be activated for service. we recommend you visit your nearest apple store for more information".

  • While syncing my ipod all songs and pictures were cleaned out of it and now it is not recognized by itunes.  Help!

    Whiling syncing my ipod all of my music and pictures were cleaned out and now my ipod is not recognized my itunes.  I have uninstalled and reinstalled itunes and it didn't help.  Any suggestions?

    What shows up on the iPod's display when you have it connected to your PC?  Have you tried resetting the iPod with it still connected?  To this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    Otherwise, try rebooting your PC, opening iTunes, and then reconnecting your iPod to a high powered USB 2.0 port.
    B-rock

  • Hard crash now hard drive not recognized in disk utility.

    During a virus scan the Macbook froze up now the computer does not seem to be accessing the hard drive. Tried to reinstall Leopard but the internal hard drive is not recognized (same is true when we tried to use Disk Utility). It will not start in safe mode either. Does this sound like a fried hard drive or maybe a corrupted drive that might be repairable with DiskWarrior? Any thoughts would be appreciated.

    If the A/V you were using was Norton/Symantec, the drive may be OK. Norton is a virus.
    Burn a Ununtu CD and see if you can boot into it and look at the drive before giving up on it.

  • While I was restoring the ipod touch the battery on the computer died. Ipod was in the middle odf the process, now It's not recognized at all.

    I was restoring my ipod on Itunes to a factory settings, in the middle of the process the battery on my PC died. When I pluggled it back on the power, the ipod touch is not recognized on the Itunes.

    Take a look at this, and try this: http://www.iclarified.com/entry/index.php?enid=1034

  • Shuffle g2 not recognized; help?

    When I connect my new iPod shuffle in it says "USB Device not recognized... Please try reconnecting the device [...]" I've tried everything, and the closest I got was while doing the steps listed in http://docs.info.apple.com/article.html?artnum=305136 but the Hardware Update Wizard won't even ask me if I want to connect to Windows Update to search for software, so it doesn't work... Anyone knows how to work around that? I'd really want my shuffle to work..

    Check the manufacturer of your computer to see if any new USB Drivers are available and download and install them. If not, go into Device Manager, highlight USB and delete the USB Driver. Restart your computer and Windows will reload the driver.

  • Latest iTunes Update and now DVD's not recognized.

    Hiya,
    Recently, iTunes prompted me to update my software which I did to version 7.7.1.11. Now, neither of my two DVD writer's are recognized (ie. in MyComputer). One of them shows up in the Bios but not both of them. I've changed cables and no change. I would think there may be a hardware issue but the exact same issue has occured on my wife's computer shortly after updating iTunes as well so I suspect there's something going on with iTunes. Is there a fix for this or how can I revert to an older, working version of iTunes? Thank you very much for any help.
    jlc

    Eureka, I found the problem with not being able to open itunes after last update.  This evening received a prompting for an apple update for Quick time player.  At first almost deleted it in my digust with apple since last update, but figured hey, could mess things up any worse, and so clicked yes.  Apparently problem was with quick time which was also updated with last itunes update, as after that my itunes opened up.  Appears to be lots of changes, but hey, can always learn them now that it is working.

  • I changed my password on itunes on my PC and now it is not recognized on my ipod

    I changed my email address and thus changed my apple ID and also my password,  it is recognized when I log in to itunes on my pc but when I try to download apps or update apps on my ipod touch, it shows my old apple id and will not accept the new or old password, i have snyched the ipod with the computer hoping that would help but it has not, tried it several times after restarting computer, using a different usb port, what is the next step

    The apple ID as I did not see anywhere just for email address , but then the ID is the email address, original ID does not work with new or old password, but is displayed on the apps page on iPod when trying to update apps, so ID is changed on PC and all is well it is the iPod that isn't

  • IPod not properly ejected- now iTunes will not work - Help!

    My friend had his ipod connected to my computer to charge. Conneceted through USB on a Dell/ Windows 2000 / system. He disconnected the ipod without properly ejecting it - Now, when i connect my ipod, iTunes will not recognize it- iTunes does not open- screen just reads do not disconnect. When i manually open itunes with the ipod attached, it freezes. I have re-installed iTunes, rebooted the ipod, nothing works. Recommendations? Have scowered this site for answers, tried just about everything, nothing has worked. Your help is greatly appreciated!
    PC   Windows 2000  

    See if anything in this Knowledge Base article helps: iPod shows up in Windows but not in iTunes

  • IPhone was unplugged during update; now completely unusable, not recognized

    So I was updating to the latest iPhone software through iTunes when somehow, the USB got unplugged. Now, the phone is always off; when I turn it on it just has a picture of a USB cable pointing towards the iTunes logo for a few seconds, and then shuts off again. It's comepletely unusable. When I plug it into the USB port, it is recognized in Windows and the computer and all, but it doesn't appear in iTunes, and the iPhone's screen is the same image as when it is unplugged.
    HELP PLEASE!!!
    No phone + No music = Death.
    =[.
    Thanks in advance!
    --Sarah.

    Try forcing your iPhone into Recovery mode.
    Disconnect the USB cable from the iPhone.
    Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off.
    Press and hold the Home button while reconnecting USB cable. When you reconnect USB, the device should then power on.
    Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo.
    When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message.
    This will require an iPhone Restore.

  • Iphone update failed and now it's not recognized in itune at all

    itune prompted the latest update. 4.3.x (not sure)... so I follow the prompt and did the latest update...
    Well, it failed to update correctly and now my phone is not working at all. All I see on the phone is the itune icon with the USB port connection image on it...
    itune won't recognize the phone on it's device list either.
    this is very frustrating... it happen to me last year with the first iphone4 i had and it's now happening again after the second one...
    HELP!!

    Hi,
    See These Links:
    http://support.apple.com/kb/HT1808
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    Device Frozen
    http://support.apple.com/kb/ts1445

  • Installed Leopard Update, Now Second Monitor Not Recognized

    Is there any way to remove the 1.3 update? I now cannot use my second monitor and when I tried to use time machine, well you can guess what happened. The system froze as soon as I clicked on the icon.
    I just switched to a Mac and I am starting to regret the decision.

    Carl, try a couple things....
    1) Startup your computer holding SHIFT down. This may take a while to startup. When it's done, simply restart again. Test your system.
    2) Zap the PRAM by holding down CMD-SHIFT-P-R as your computer starts up. Release those keys when you hear the second startup chime. Then test your system again.
    3) Repair Disk Permissions using DISK UTILITY in your Utilities folder.
    4) Reset the System Memory Unit by simply shutting the computer down, unplugging EVERYTHING from the computer (specially the power cord) and let it set for 5-10 minutes. Then plug everything back in and restart.
    It will not hurt to try these steps. It's worth a shot. Good luck!

Maybe you are looking for

  • HT1918 I need to disable an Apple Account!

    I can not disable my apple account or get into it.  I have two accounts and changed my email to the new account.  When I try to get into the old account w/out  a password the system doesn't recognise my birthday.  How do you talk to a person for help

  • I can't see a video when I open email on AOL 9.7, but when I open it through IE I can see it,,, why?

    When I open an email through AOL9.7 that has an Adobe Flash Player video in it, all I See is a black box,,,when I open the same email through Internet Explorer (when I open AOL through IE) I can see the video.  I do have the latest version of Flash P

  • To access a dynamic context node defined in a Used Component

    Hi Gurus, I need your help with something. I have a dynamic context node in ComponentA. I want it in Component B too. Component B uses Component A, but I am not able to get access to the context node. Is it possible to do this? Any suggestions how to

  • Call SAP function from BSP

    Hi BSP Gurus, I am new to BSP World. I was told that review the existing BSP module and modify the SAP function module to take care of the new business unit. Now my question is where to start ?....do I need to know the existing BSP module ? How would

  • Why can't I open my file (apology)

    OK, as the OP of this now-locked thread I must admit that I am a newb to using the amazingly rich and multifaceted Adobe CS package. I should have remembered that I have CS5.5 on my machine at home and CS5 at the office. That should probably have mad