Now Playing window moves on second track played

I like to show the Now Playing window, move it to the left of my cinema display, and work on other applications mostly on the right. However, since upgrading to iTunes 9, when the next track starts playing, the window jumps to the center of my display. iTunes 8 left the upper left corner where it was, which worked perfectly for me.
Is there anything I can do about this?

Also experiencing this issue. Appears to be almost at random. It doesn't seem to be connected with the presence or absence of album art or music videos. Sometimes closing the window stops the song, sometimes it doesn't.

Similar Messages

Cannot play rented movies error 42110, cannot play rented movies error 42110

cannot play rented movies error 42110, cannot play rented movies error 42110

Try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

First, back up all data and then uninstall "DivX" according to the developer's instructions.
Then try this:
VideoLAN - Download official VLC media player for Mac OS X

Windows Movie Maker won't play on DVD player

I have the OS7 now
The instruction say that a burned MASTER disc will play on DVD players and most computers???
I have used Mp4 and WMV formats with Windows Movie Maker, but none will play on DVD players but play well on computers???
I had formally use the Windows DVD Maker and the final file was UBF which seemed to work on all players and computers. My DVD Maker will not allow completion of Movie, it notes, " I need the proper codes to make it work"??
I have looked on the Microsoft site for these support codes but cannot find them??? Windows Movie worked well on my Vista OS. What has MS done to screw up this software???
WGC_BAC

You need to read the owner's manual for your DVD player to find out exactly what video formats it will play. Then you must ensure you record your video to DVD in a format that is recognized by your DVD player. The Windows 7 Windows Movie Maker
may have a different default video format output that what you were using in Vista. You have the option to specify the format of the video you record to DVD.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

DVD either plays wrong movie file, stops while playing, or won't play

Hi, everyone. I'm pretty new to Macs, having got a MacBook a couple of months ago. I just made my first dvd using iDVD, and it played perfectly in preview, but it has all kinds of playback problems. In addition to my main feature, which I made in iMovie, I included a few .mov videos from my digital camera, created a slideshow using iDVD, and, for kicks, put a single image of my cat with a caption exported from Power Point (for Mac) to play before the title menu. (Ah, yes, the newbie likes to play with new toys!)
Problem 1: I placed the newly burned disc in my mom's HP laptop to see if it would play, and we chose Real Player to play it. At first nothing would play, but we tried a couple of buttons, and then the dvd started. But, instead of the pic of my cat I expected, one of the .mov file began to play. It then went on to the title menu as it was supposed to. However, none of the buttons would respond to the mouse or the keyboard.
Problem 2: Wondering why that was going on, we tried the Windows Media Player, QuickTime, the HP QuickPlay player, and a 4th player on her laptop I was unfamiliar with. None of them worked. I even tried ejecting and reinserting the disk each time, Finally, Real Player would not play the disk on a second try.
Problem 3: I put the dvd in a dvd player hooked up to a t.v. The same incorrect .mov file played, followed by the title menu. I started the Main Feature (iDVD movie, 30 minutes long); it started, but then after a couple of minutes, the video just stopped. I hit play again, and the same wrong .mov file played again. Any time I went to the title menu and clicked to play any of the .mov files or the slideshow, the same single .mov file played.
I am using some DVD+Rs 4x that my friend gave me (the videos are for her). They are the CompUSA brand, which she apparently uses all the time. I've never had a dvd burner before. I encoded for Professional Quality, chose Single level dvd, and used widescreen aspect ratio in NTSC mode. There are 46 minutes of content in the project, and the little arrow on the Capacity meter is just a little over the halfway mark, still well within the green. The content size is 2.43GB; I have 111.53 freespace.
If anybody has any idea of what when wrong, I would appreciate it. I have double- and triple- checked everything I could think of, and read every help topic I could find, and I can't find anything that I did wrong.
Thanks.

Ah, yes, the newbie likes to play with new toys!
If anybody has any idea of what when wrong, I would appreciate it. I have double- and triple- checked everything I could think of, and read every help topic I could find, and I can't find anything that I did wrong.
My suggestion is that you use the 'crawl before you walk' and 'walk before you run' approach.
Don't try a 'kitchen sink' project before you have cut your teeth on a couple of simpler projects. If you don't want to waste a DVD, just create a disk image file (an option under FILE in iDVD) and play it with the Apple DVD Player application.
The only sure way to test your DVD is with a set top DVD player hooked to a TV set. There are too many strange variables associated with the many Windows DVD playing applications.
instead of the pic of my cat I expected, one of the .mov file began to play. It then went on to the title menu as it was supposed to.
It sounds like you put the files in the wrong locations within iDVD. (Look at the MAP view for positioning.)
Try a simple first project.
F Shippey

Windows move when cursor tracks

This morning after starting my computer I noticed that when the cursor tracks the window moves also.
If I move the cursor up or down I lose either the top of the title bar or the dock. When moving left or right I lose the close button or the scroll bar. I have rebooted several times and this hasn't cleared up the problem. i've looked in mac help as well as system preferences and cannot find anything remotely
related to this dilema. Is there anyone out there who can give some constructive input regarding this
problem>? I am baffeled as heck and would appreciate any help. Thanks
Tim Emerson

Open the Universal Access pane of System Preferences, click on the Seeing tab, and turn off Zoom.
(40758)

HT1725 My movie havent been download proparly its show a icloud symbol on the top right corner i keep trying to put the movie on my desktop but its not responding when i try to play the movie but it eithers plays another movie or doesnt play at all

i wrote my promblem on the title sorry....

Hello hotsone,
You may need to download a lower resolution version of the movie in order for it to sync to your iPod.
iTunes: Sync purchased HD videos to iPod or iOS device
http://support.apple.com/kb/TS4223
Cheers,
Allen

HT1848 I purchased Springsteen's Wrecking Ball using my ipod touch. Then I was syncing the touch and the lp was transferred to the pc via a download from the store. I cannot get it to sync back onto the ipod nor can I play or move individual songs to play

Any tips are appreciated.

- Try resetting the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next, restore from backup.

Quicktime won't stop playing web movies

I installed QT 7.0.3 today and now every web movie I try to play directs to a new IE window and plays .mpg and .mpeg files in Quicktime.
I've told QT not to be associated with .mpeg and .mpg files. I've told WMP to associate with .mpeg and .mpg files. WMP is the default with files on my computer, but not on the web. I've restarted and tried changing file associations in Windows Explorer. No change - .mpeg and .mpg files on the web always navigate to a blank page with just a quicktime window. Any suggestions?
This is all happening on my IBM Thinkpad T42 with XP Pro, not my Powermac.

I discovered this older message on the board as I have the same problem too, but I haven't found any solutions. I am hoping that someone has an answer. I recently installed the software, and on install, I deselected all files for play with the exception of quicktime files. WMVs open Windows Media Player properly, MPGs and MPEGs open in Quicktime in the same Windows Explorer page. I have everything selected in WMP Tools/Options/File Type and in the QT preferences, MPEG is deselected and under Video, only Quicktime files are selected. Your assistance would be greatly appreciated.

All tracks playing automatically

I have sync'ed my iPhone with iTunes. One of the Playlists has several Tracks. When the first Track is fully played the iPhone stops. I have to press again Play button for the second Track. How do I make all the Tracks played automatically in serial?

Look at the songs in iTunes on your computer (list view). Does each song have a check mark in the box to the left of the song's name.? Unchecked songs have to be clicked on individually to play them, checked songs will play one after the other.
To check or uncheck all boxes on a PC with one click, hold down the Control (ctrl) key and click on one of the checkboxes with the mouse. You can use this in a library, a playlist or in search results.
To check or uncheck all boxes on a Mac with one click, hold down the Command (cmd) key and click on one of the checkboxes with the mouse.
Then sync your iPhone again.

After a itunes update my HDV mov files won't play on my mac.

I applied and update to my MacBook pro and BAM!! Now my HDV.mov files won't play with QuickTime or final cut pro. I'm in the middle of a project and I can't finish it because when the files play in fcp I get a error. Can anybody help me with this?

I have two anserws I think might work for you. The first one is: This solved the issue down loading and re-installing Quicktime 7.5.5
http://www.digitalrebellion.com/blog/posts/using_pacifist_to_downgrade_quicktime .html
I'd create a backup of the System / Components and Quicktime folders first though, just incase you need to revert back.
and the 2nd one is:
I HAVE A FIX...AND IT WORKS!!!!!!!!! Actually a friend found this fix somewhere else, but I just did it and it worked. The only rub is you need to have access to another system that has not been updated to iTunes 10.5 or QT 7.7.
On the system that has not been updated, go to:
MAC HD/System/Library/Components and copy that folder to an external drive...next go to
MAC HD/System/Library/QuickTime and copy that folder to an external drive.
On the system that is not working, go to the same places on the MAC HD and delete those two folders. Then copy the folders from your external drive to the same location. Restart you system...i did it twice...and everything should be back to normal. This has worked on both systems here that were previously jacked up. If you do not have access to a system that was not messed up, let me know and maybe we can swap files.
I havent tried any of these yet because I'm in the middle of a project and I dont wnat anything to go wrong right now. After I'm done I will be sure to get started on one of these.
If you try any one of these let me know how it works out.

After an itunes update my HDV mov files won't play on my mac.

I applied and update to my MacBook pro and BAM!! Now my HDV.mov files won't play with QuickTime or final cut pro. I'm in the middle of a project and I can't finish it because when the files play in fcp I get a error. Can anybody help me with this.

Take a look at this thread...
https://discussions.apple.com/thread/3385122

Why does iphoto not play my movies

I have a macbook pro. I have transferred photos and movies from SD cards that are otherwise part of my Nikon D 5100 and Panasonic TZ 40. After initially loading the photos and movies, all movies were playing as expected. However, somewhere after updating to OX 10.9.4 they have stopped playing. The icon for the movie still shows, but the time of the movie appears as ZERO. When I click to play, the movie loads begins to play but ends almost immediately.
Currently the movies are not playing.

Select one of the videos in iPhoto and user the File ➙ Reveal in Finder ➙ Original menu option. Does that take you to the full video file in the Masters folder? COPY it to the desktop and see if it will play with Quicktime Player.
When you rebuild the library what options did you select?

Imported avi crashes premiere pro cs4...sound only on windows movie maker

Hello all,
So when I go to import an avi it just crashes premiere pro...but first it turns into a sound only file, then crashes. With windows movie maker it only plays the sound?
Anyone else have these problems? I don't really want to use other video editors...
Oh and I'm running Vista.
Suggestions please.

I'm sorry I don't have a quick answer.
From what I can tell
- Vista X64 uses MovieMaker 64bit
- MovieMaker 64bit requires 64bit codecs (I think there is an experimental 64 bit ffdshow on sourceforge that might work)
- However installing 64bit codecs may stop your 32bit video apps from rendering properly.
I didn't provide links to the experimental ffdshow build cause I didn't try it myself.
If I were you, I'd give up on getting Movie Maker working for now, and just focus on Premiere pro. ? Since it is a paid application they should provide good support. You can't be alone with this issue. If they require codec information just tell them it's a H.264 video with PCM Audio in a AVI wrapper. Guess a quick snapshot video could be provided if they needed one.
ps.
. I'm just a user, not affiliated with Creative)
(pss... I use Vista x64 as well, and do not get video in moviemaker either)

HT203175 Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, The movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Any ideas on a cure?

Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, the movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Does it with all movies in the library, Most where downloaded from Itunes. Any ideas on a cure?

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Now Playing window moves on second track played

Similar Messages

Maybe you are looking for