Now the Apple logo is gone  .How do i open the ipad now the screen is black

Now the Apple logo is gone  .How do i open  or unlock my ipad?the screen is black now

Is the iPad password protected? If not, and in the absence of more information, try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

Similar Messages

  • My battery died, I charged phone now black screen apple logo blinking. How do I fix?

    My battery died, I charged phone now black screen apple logo blinking. How do I fix?

    If Apple replaced the battery, contact them to check the phone, the battery replacement is covered by a warranty.
    iPhone - Contact Support - Apple Support

  • Iphone 4 was dropped in cold coffee.  I let it dry in rice for a week.  It turns on but the screen is black, and if you hold it at an angle  you can see the apple logo.  How do I fix this

    I let my phone dry out in rice for over a week.  I see it turn on but the screen is black.  If you hold it to a light you can see the Apple logo.  How can I fix this?

    It depends which country you are from below is US
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • HT201263 None of these answers help my problem.  My ipad will not leave the Apple logo.  I hold both buttons and the screen goes black, then the apple logo immediately pops back up.  I can't do anything because the apple logo just keeps popping back on.

    I haven't been able to find any answers that solve my problem.  My Ipad will not leave the Apple logo.  I hold both buttons and the screen goes black and then the Apple logo immediately pops back up.  I can't get the red slider screen at all.  No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

    Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
    When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
    while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
    You should now be able to restore

  • My ipod touch is flashing white on and off, I hold the buttons down, and the screen goes black- but the apple logo does not come on. What do I do?

    So I have had this problem before, and know that you hold down the top Power button and the Home button, at the same time, for roughly 10 seconds, or until the apple logo comes on.
    The problem is, when I press the buttons and the screen goes black, like it's supposed to before the logo pops up, the apple logo isn't appearing.
    I was wondering if that's because my I pod touch was drained when I plugged it in to charge, and I tried to turn it on when it was still charging?
    What can I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When I turn on my iPhone 4S the apple logo pops up for a split second then the screen goes black but the phone itselfs boots up just fine???

    I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!

    Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones  trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

  • HT1208 After updating my iphone 5C, the screen was black but had the itune logo in the center, a white arrow pointing to the logo, and what seemed like a white lock, but it had a long white line leading to the bottom of phone.  Phone is now frozen.  What

    After adding the latest update to my 5c iphone, the screen was black, with the itune logo in the center, a white arrow below it point to the logo, and below that, what seemed to be a white lock, but it had a long white line reaching the bottom of the screen.  I can't get the phone to start.  The white apple appears and then I get the same logo, arrow, etc.  What can I do to fix this?  Thanks for any assistance.

    i m also put passcode in my iphone...but i dont know that how i know that my passcode is crack by someone???and same as police is not interested to find out it..
    i want ma iphone backkk...........

  • My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont know what to do.  How should I fix this problem because I cant turn it back on?

    My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont have a clue what to do.  How should I fix this problem because I cant turn it back on? I have only had my phone for 2 months.

    I also live an hr away from the Apple store, so its not the best thing to go there just to ask a question and find out what to do

  • Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!   What should I do?

    Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
    What should I do?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • My Ipad (4?) screen went black but I can hear it. I tried hitting both the sstart button and sleep button for 10 seconds and the apple icon comes up, my screen saver shows for 1 second and it returns to black screen again. I can hear SIRI. How do I fix?

    I had been using the IPAD and all of a sudden it started talking back to me and when swiping apps to close them they would not close. She (the IPAD) kept talking back to me such as "use three fingers" etc. Then the screen went blank and if I touched it I could get it to beep at various touch points. SIRI would also communicate, but the screen stayed black.
    As was suggested here, I tried getting a reboot by holding the sleep key with the home key and after 10 seconds the apple logo shows and 5 seconds later my screen saver comes on for just one second, and then it goes back to a black screen. SIRI tells me shes not available and someone else, must be her sister, says things like 90%, 85%, 80% if I continually swipe the screen. Can anyone help me?

    Hello, Juniorjr2. 
    Thank you for visiting Apple Support Communities.
    This sounds like screen curtain may be enabled.  Screen curtain is a feature that allows display privacy.  To disable screen curtain while VoiceOver is enabled, you can three finger triple tap the screen to disable this feature.  You may need to press the home button once in order to process these steps.  If you wish to disable VoiceOver, see the link in the article below.
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    If the issue persists, try reaching out to us here. 
    Cheers,
    Jason H. 

  • Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
    When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
    I hope this helps you my friend!

  • How i can open my ipad if the previous owner forget his apple ID

    how i can open my ipad if the previous owner forget his apple ID

    A valid bill of sales with serial number would be a good start.
    Probably a better solution would be have the previous owner check with Apple to find out what his old password was.
    Allan

  • During/after upgrading to ios8.1 my ipad air is looping is a screen where i see the apple logo after a minute or so i see a flash of bleu then black en the it starts over again....i can't even turn of.

    During/after upgrading to ios8.1 my ipad air is looping is a screen where i see the apple logo after a minute or so i see a flash of bleu then black en the it starts over again....i can't even turn of. Help?

    Hi,
    Had the same issue.  Hard reset not working.
    What I did was: start your mac/pc and open iTunes, hold down the home button of the iPad (and while holding the button), connect it to the PC with the cable.
    Keep pressing until you get a pop-up asking to upgrade or restore.
    Hope this helps for you!
    Xavier

  • HI I HAVE A G5  SOON AS I TURN IT ON   AFTER THE APPLE LOGO   THE SCREEN GOES BLACK   AN SAYS     ECT/MASTER PASSWORD / ARGUMENT INVALID/HI I HAVE A G5  SOON AS I TURN IT ON   AFTER THE APPLE LOGO   THE SCREEN GOES BLACK   AN SAYS     ECT/MASTER PASSWORD

    HI I HAVE A G5  SOON AS I TURN IT ON   AFTER THE APPLE LOGO   THE SCREEN GOES BLACK   AN SAYS     ECT/MASTER PASSWORD / ARGUMENT INVALID/

    Can you boot up from your install DVD and run "Repair Disk" from the Utility menu?
    ===========
    Please do not type in CAPs.  It is considered shouting in cyber space and very hard to read. We can all hear ya!
    Thank you.

  • HT201412 I cannot start my iPad3. The screen is black or shows a persistent Apple logo.

    I cannot start my iPad. The screen is black or shows a persistent Apple logo.

    try a hard reset, and try to put the device in recovery mode and restore

Maybe you are looking for

  • No Sound playing AVI files in Quicktime Pro - help!

    Help! I just bought QT Pro for Windows(Xp) to convert my AVI files to Mpeg4 for my Ipod. The Apple Store sales guy promised it could be done. I see video but no sound on all of the AVI files. For example, on 2 of my AVI video files, according to Gspo

  • Invalid use of Null: 'CStr' - checkbox UPDATE - what the heck?!

    Jeesh...you just think you're beginning to understand things and then something "weird" happens! Anyway, what is wrong with this?: <input <%If (CStr((rsCustomer.Fields.Item("deletethis").Value)) = CStr("True")) Then Response.Write("checked=""checked"

  • Silent monitoring is not working

    Silent monitoring is not working, sometimes it work for some and others time it does not. CCM ver 7.1.x IPCC Express 7.0.x

  • PDF pinch and zoom, panning bug with latest version?

    I have found stumbled upon something strange with PDF folios with Zoom enabled with the latest version. When you zoom in and pan around if you pan left<->right and then try to pan up<->down without releasing the pan, it is locked in a left<->right pa

  • Different colors for hierarchy nodes in WEBI 4.0 (Possible or not)

    Hi Everyone, We have been listening a lot about the capability of Webi 4.0 in terms of Hierarchies from BW BEx Query. It works just fine like in BEx Analyzer, but is it possible to create formatted reports like we do in Crystal reports to display dif