Now this is getting to be ridiculous
I've posted about this before to no avail, but now my wifi connection problem is at its worst. I now lose my wifi connectivity almost every time when I turn on the iPad from sleep mode. Every time I have to go into settings, turn wifi off and turn it back on to get a signal. How annoying! Does anyone have the same problem or does anyone have a solution? Please help.
HI,
I responded to you over here: http://discussions.apple.com/message.jspa?messageID=12472763#12472763
You didn't reply. I'll try again.
Tap Settings in your Home screen then tap Reset / Reset Network Settings. Tap Reset when prompted.
Now restart your iPad.
Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
It would help if you clicked My Settings on the right side of this window and tell us which computer model you use and which operating system. Thanks..
Carolyn
Similar Messages
-
Now this is getting really weird..........who is ...
Guys,
I'm convinced someone/something is remotely altering my hub. Please indulge............
Earlier this week first time ever I see a CWMP Connection Request not allowed this is followed few days later by a "Controlled Kernel Restart" - not initiated by me. .....
Anyways, today, I decided to do a full reset of the Hub - all seemed ok , until about fifty minutes later I get another "Controlled Kernel Restart" .......It seems something didnt like the changes etc to me???. Logs are below - there are some entries that seem weird which Ive highlighted (help explaining these would be good) - for instance lots of CWMP Connection request no allowed ............., odd 198.18.1.1 server noted etc.
I hope I dont come over as a crank,but somethings just not right here as far as I can figure. Could do with some Expert /MOD help please? or a pointer as to where to go for some technical advice from BT.
Grateful for help.
15:36:45 22 Jun
SNTP Synchronised to server: 213.123.20.170
15:36:45 22 Jun
SNTP Systemtime update: time setting 01:03:59 > new time setting: 15:36:45
01:02:40 1 Jan
CONFIGURATION saved by TR69
01:02:09 1 Jan
CONFIGURATION saved by TR69
01:01:57 1 Jan
[CWMP] Connection Request NOT ALLOWED.
01:01:34 1 Jan
usbmgr: USB device isn't matched the configuration
01:01:33 1 Jan
usbmgr: try /etc/usbmgr/class/module
01:01:33 1 Jan
usbmgr: try /etc/usbmgr/class/09/module
01:01:33 1 Jan
usbmgr: try /etc/usbmgr/class/09/00/module
01:01:33 1 Jan
usbmgr: try /etc/usbmgr/class/09/00/00/module
01:01:33 1 Jan
usbmgr: class:0x9 subclass:0x0 protocol:0x0
01:01:33 1 Jan
usbmgr: buffer line: remove T
01:01:33 1 Jan
usbmgr: USB device isn't matched the configuration
01:01:33 1 Jan
usbmgr: try /etc/usbmgr/class/module
01:01:33 1 Jan
usbmgr: try /etc/usbmgr/class/09/module
01:01:33 1 Jan
usbmgr: try /etc/usbmgr/class/09/00/module
01:01:33 1 Jan
usbmgr: try /etc/usbmgr/class/09/00/00/module
01:01:33 1 Jan
usbmgr: class:0x9 subclass:0x0 protocol:0x0
01:01:33 1 Jan
usbmgr: buffer line: remove T
01:01:05 1 Jan
PPP link up (Internet) [81.xxx]
01:01:05 1 Jan
PPP CHAP Chap receive success : authentication ok
01:01:05 1 Jan
PPP CHAP Receive challenge (rhost = ESR13.Birmingham6)
01:01:02 1 Jan
xDSL linestate up (ITU-T G.992.1; downstream: 7616 kbit/s, upstream: 448 kbit/s; output Power Down: 19.7 dBm, Up: 11.9 dBm; line Attenuation Down: 19.0 dB, Up: 12.0 dB; snr Margin Down: 23.0 dB, Up: 10.4 dB)
01:00:55 1 Jan
DHCS server up
01:00:55 1 Jan
FIREWALL event (1 of 2): modified rules
01:00:55 1 Jan
FIREWALL event (1 of 1): deleted rules
01:00:49 1 Jan
FIREWALL level changed to Standard.
01:00:43 1 Jan
WIRELESS automatic channel selection done (channel = 7)
01:00:40 1 Jan
FIREWALL event (1 of 8): created rules
00:00:40 1 Jan
FIREWALL event (1 of 1): deleted rules
00:00:40 1 Jan
FIREWALL event (1 of 1): modified rules
00:00:40 1 Jan
FIREWALL event (1 of 1): created rules
00:00:28 1 Jan
WIRELESS interface turned on.
00:00:27 1 Jan
usbmgr: start 0.4.8
00:00:19 1 Jan
KERNEL Warm restart
15:32:42 22 Jun
KERNEL Controlled restart
15:32:37 22 Jun
PPP link down (Internet) [81.xxx]
14:48:38 22 Jun
LOGIN User admin logged in on [HTTP] (from 192.)
14:47:14 22 Jun
LOGIN User Basic logged in on [HTTP] (from 192.)
14:43:26 22 Jun
CONFIGURATION mbus igd sync successfull
14:43:19 22 Jun
CONFIGURATION mbus atomic sync successful
14:42:57 22 Jun
SNTP Synchronised to server: 213.123.26.170
14:42:57 22 Jun
SNTP Systemtime update: time setting 01:04:38 > new time setting: 14:42:57
01:04:29 1 Jan
CONFIGURATION saved by TR69
01:03:57 1 Jan
CONFIGURATION saved by user (/dl/user.ini)
01:03:47 1 Jan
FIREWALL event (1 of 14): modified rules
01:03:47 1 Jan
FIREWALL event (1 of 6): deleted rules
01:03:47 1 Jan
FIREWALL event (1 of 1): flushed rules
01:03:47 1 Jan
FIREWALL event (1 of 33): created rules
01:03:31 1 Jan
[CWMP] Connection Request NOT ALLOWED.
01:03:28 1 Jan
[CWMP] Connection Request NOT ALLOWED.
01:03:16 1 Jan
CONFIGURATION saved by TR69
01:03:08 1 Jan
[CWMP] Connection Request NOT ALLOWED.
01:03:07 1 Jan
[CWMP] Connection Request NOT ALLOWED.
01:03:07 1 Jan
[CWMP] Connection Request NOT ALLOWED.
01:03:03 1 Jan
LOGIN wireless station [exx] can't get authorized.
01:02:51 1 Jan
CONFIGURATION saved by TR69
01:02:40 1 Jan
[CWMP] Connection Request NOT ALLOWED.
01:02:40 1 Jan
[CWMP] Connection Request NOT ALLOWED.
01:02:40 1 Jan
[CWMP] Connection Request NOT ALLOWED.
01:02:17 1 Jan
CONFIGURATION saved by TR69
01:01:59 1 Jan
LOGIN wireless station [E0:xxx] can't get authorized.
01:01:56 1 Jan
CONFIGURATION saved by TR69
01:01:46 1 Jan
[CWMP] Connection Request NOT ALLOWED.
01:01:37 1 Jan
SNTP Unable to contact server: 198.18.1.1
01:01:25 1 Jan
PPP link up (Internet) [81.xxxxx]
01:01:25 1 Jan
PPP CHAP Chap receive success : authentication ok
01:01:25 1 Jan
PPP CHAP Receive challenge (rhost = ESR13.Birmingham6)
01:01:12 1 Jan
xDSL linestate up (ITU-T G.992.1; downstream: 7616 kbit/s, upstream: 448 kbit/s; output Power Down: 19.8 dBm, Up: 11.9 dBm; line Attenuation Down: 19.0 dB, Up: 12.0 dB; snr Margin Down: 23.0 dB, Up: 10.4 dB)
01:01:12 1 Jan
usbmgr: USB device isn't matched the configuration
01:01:12 1 Jan
usbmgr: try /etc/usbmgr/class/module
01:01:12 1 Jan
usbmgr: try /etc/usbmgr/class/09/module
01:01:12 1 Jan
usbmgr: try /etc/usbmgr/class/09/00/module
01:01:12 1 Jan
usbmgr: try /etc/usbmgr/class/09/00/00/module
01:01:12 1 Jan
usbmgr: class:0x9 subclass:0x0 protocol:0x0
01:01:12 1 Jan
usbmgr: buffer line: remove T
01:01:12 1 Jan
usbmgr: USB device isn't matched the configuration
01:01:12 1 Jan
usbmgr: try /etc/usbmgr/class/module
01:01:12 1 Jan
usbmgr: try /etc/usbmgr/class/09/module
01:01:12 1 Jan
usbmgr: try /etc/usbmgr/class/09/00/module
01:01:12 1 Jan
usbmgr: try /etc/usbmgr/class/09/00/00/module
01:01:12 1 Jan
usbmgr: class:0x9 subclass:0x0 protocol:0x0
01:01:12 1 Jan
usbmgr: buffer line: remove T
01:00:55 1 Jan
LOGIN wireless station [E0:xxxx] can't get authorized.
01:00:52 1 Jan
DHCS server up
01:00:52 1 Jan
FIREWALL event (1 of 1): modified rules
01:00:52 1 Jan
FIREWALL event (1 of 1): deleted rules
01:00:47 1 Jan
FIREWALL level changed to Standard.
01:00:43 1 Jan
WIRELESS automatic channel selection done (channel = 7)
01:00:41 1 Jan
FIREWALL event (1 of 2): created rules
00:00:41 1 Jan
FIREWALL event (1 of 1): modified rules
00:00:41 1 Jan
FIREWALL event (1 of 1): created rules
00:00:30 1 Jan
WIRELESS interface turned on.
00:00:29 1 Jan
usbmgr: start 0.4.8
00:00:19 1 Jan
KERNEL Warm restart
14:38:15 22 Jun
KERNEL Controlled restartNothing unusual about any of those. Seen them many times apart from CWMP, which I have disabled on my home hub.
Just Linux startup messages. If it really worries you, buy a different router.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
13:51:37, 16 Dec. OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.65:56213->193.0.160.244:80 on ppp1)
13:51:07, 16 Dec. OUT: BLOCK [9] Packet invalid in connection (TCP 192.168.1.65:56412->178.236.4.85:80 on ppp1)
13:50:07, 16 Dec. OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.65:56213->193.0.160.244:80 on ppp1)
13:49:44, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:56260 on ppp1)
13:48:43, 16 Dec. OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.65:56213->193.0.160.244:80 on ppp1)
13:48:14, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:56162 on ppp1)
13:48:12, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:56161 on ppp1)
13:48:08, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:56162 on ppp1)
13:48:06, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:56161 on ppp1)
13:46:32, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 217.41.223.66:80->86.148.155.106:56100 on ppp1)
13:45:01, 16 Dec. BLOCKED 1 more packets (because of Packet invalid in connection)
13:45:00, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:55994 on ppp1)
13:45:00, 16 Dec. BLOCKED 1 more packets (because of Packet invalid in connection)
13:44:59, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:55993 on ppp1)
13:44:55, 16 Dec. BLOCKED 1 more packets (because of Packet invalid in connection)
13:44:54, 16 Dec. BLOCKED 2 more packets (because of Packet invalid in connection)
13:44:53, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:55993 on ppp1)
13:41:45, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 2.17.191.144:80->86.148.155.106:55773 on ppp1)
13:40:10, 16 Dec. BLOCKED 1 more packets (because of Packet invalid in connection)
13:40:09, 16 Dec. OUT: BLOCK [9] Packet invalid in connection (TCP 192.168.1.65:55571->173.194.66.120:443 on ppp1)
13:39:28, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 2.17.178.110:443->86.148.155.106:55586 on ppp1)
13:35:16, 16 Dec. BLOCKED 1 more packets (because of Packet invalid in connection)
13:35:15, 16 Dec. OUT: BLOCK [9] Packet invalid in connection (TCP 192.168.1.65:55569->74.125.229.175:443 on ppp1)
13:26:47, 16 Dec. OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.65:55448->193.0.160.244:80 on ppp1)
13:26:28, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 88.221.94.26:80->86.148.155.106:55413 on ppp1)
13:26:15, 16 Dec. BLOCKED 2 more packets (because of Packet invalid in connection)
13:26:14, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:55311 on ppp1)
13:26:14, 16 Dec. BLOCKED 2 more packets (because of Packet invalid in connection)
13:26:13, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:55310 on ppp1)
13:26:11, 16 Dec. BLOCKED 4 more packets (because of Packet invalid in connection)
13:26:10, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 69.163.224.206:80->86.148.155.106:55254 on ppp1)
13:26:09, 16 Dec. BLOCKED 2 more packets (because of Packet invalid in connection)
13:26:07, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:55313 on ppp1)
13:26:07, 16 Dec. BLOCKED 2 more packets (because of Packet invalid in connection)
13:26:07, 16 Dec. IN: BLOCK [9] Packet invalid in connection (TCP 66.77.49.219:80->86.148.155.106:55310 on ppp1)
13:26:03, 16 Dec. BLOCKED 4 more packets
There are 2 whole pages of this just for today so far."To be honest I am a bit reluctant to do this as my connection is fast and stable and i don't want any fiddling done with it. I would rather live with it. These attempts at access are being blocked so no real problem at the mo.
Thanks for your help.
My hub is on default settings as far as I know. " -
What do I do? I have already downloaded OS Yosemite (it says so on my Apple>About this mac>overview) but now I keep getting a message from "install Yosemite" that keeps asking me to install Yosemite again and won't go away.
I have the same issue. My computer has also slowed down. I hope this isn't a malware. I haven't input my password into it, and dont know what I did to turn this on.
Hope someone else can give some insight -
my iphone is connected to a old account that i have used in a while i have a new icloud i tried reseting my phone but now i can get in becuase it linked in with my old account how can i fix this so i can log in with my new account i reset my phone but i did it before on my new phone but this old is link to a account that i set up when i was so much younger can you advise what to do?
ThanksGo into Settings App and turn OFF Find My iPhone. It will ask for your old password, but in the future you can use your new Apple ID account. If you need to reset the old password try this: https://iforgot.apple.com/password/verify/appleid?language=US-EN&returnURL=https ://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
-
I recently got the new iPhone 5c I used icloud to back everything up from my 4s to my new 5c. Now, I keep getting a pop up that says Continue Restoring? (This iPhone has not been backed uprecently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app date?)
I seleted to finish downloading because I didn't want to lose anything. It still will not finish downloading and I have tried this several times.
What do I need to do to that I can get my iphone to back up and so that I can install the new iOS?Hello there, Brandifoote24.
The following Knowledge Base article offers up an explanation of what you're error signifies:
iCloud: Understanding Backup alert messages
http://support.apple.com/kb/TS4576
"This iPhone has not been backed up recently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app data?"
This message is displayed if your iOS device has been trying to complete a restore for more than three days. This can occur if your restore has been interrupted due to network connectivity issues or some other problem occurs.
Being that this is the case, you would want to go back to the article it seems you were referred to us from and try to restore from your icloud backup again:
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/TS4036
How do I restore an iCloud backup if my device is already set up for use?
You'll need to erase all data and settings from your device, so first confirm that you have an iCloud backup to restore:
Go to Settings > iCloud > Storage & Backup > Manage Storage, then tap the name of your device to view a list of iCloud backups.
Check the date of the backup you want to restore, because you'll be restoring only what iCloud backed up on that date.
After confirming that an iCloud backup is available, follow these steps:
Connect your device to a power source and make sure that it is connected to the Internet via Wi-Fi.
Follow the instructions for restoring your iOS device from an iCloud backup, which include making sure that your device is using the latest version of iOS.
If the issue persists, then I would troubleshoot Wi-Fi using the following article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I am traveling out side of the U.S. and I am trying to up-date some apps on my iPod touch. Now I'm getting this message... "Account Not In This Store. Your account is NOT valid for use in the Ecuadorian store. You must switch to the U.S. store"
Please, is there anyone one out who can help me solve this problem? I just can seem to figure out how to get to the U.S. store... thanks!I just read this solution, tried it & now it's working...
I think I found a fix...I went to Settings, iTunes & App Stores, then click on your Apple ID...view Apple ID...change country region to USA (even though it was already USA...just do it again...go through the steps making sure the United States store is selected...agree to the Terms of Service, THEN I think what the key is is to RE-auhorize your credit card...in my case all I had to do was enter the security code...and it worked...I am now able to download the YouTube app for example...couldn't do it before. -
Not much more to add. I did a restore to an earlier time and still no joy. I am at a loss. I am not a totally savvy computer person at all, just know enough to get into trbl. That is why I stay away from most things that require me to make judgement calls. However this was a black/white decision and now I cannot get an important aspect of my Outlook calendar to work----Help please!
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure. -
I just rented 2 movies on my Apple TV and now I am getting the message, "Your Apple TV is not authorized to play this content". Now I have 2 Apple TV's and they both are saying the same thing. Yes, I have done reset, restore, etc. but nothing! Frustrated & out $10.
Apple TV (3rd generation), OS X Mountain Lion (10.8.3), 2 Apple TV's (3rd Generation).Good call!! Thanks a million. Glad I asked & thanks for the quick response. I was getting frustrated. Thanks again!!!!!
-
I just rented 2 movies on my Apple TV and now I am getting the message, "Your Apple TV is not authorized to play this content". Now I have 2 Apple TV's and they both are saying the same thing. Yes, I have done reset, restore, etc. but nothing! Frustrated & out $10.
Good call!! Thanks a million. Glad I asked & thanks for the quick response. I was getting frustrated. Thanks again!!!!!
-
I just downloaded the latest update for iTunes this morning, and now I am getting a message saying that iTunes can't start because MSVCR80.dll is missing from my computer. What the heck happened?
Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
I was told by comcast that we had a computer in the house with a malware virus, they even said that they were going to terminate our service if we did not get it fixed. Now this week we hear that there is a trojan malware virus, how do we get rid of it?
Hello,
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
Check now whether your Mac is infected by Backdoor.Flashback.39!
http://public.dev.drweb.com/april/ -
I recently upgraded to Mac OS X. I haven't tried to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?
Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.
-
I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I did the iTunes update yesterday and now I am getting this message when I try to open iTunes - “This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes. (-42037) Can anybody help me out resolving this?
Download iTunes using the tab at the top of this page, re-install. Back up your computer first.
Maybe you are looking for
-
VMM Agent install fails on Windows Server 2012 R2 Hyper-V
Hi, We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 server either from VMM console or manually on the hyper-v server. Error on VMM Console: Error (410) Agent installation failed on chsicoecdh03.casper.com. Fatal error during inst
-
Updating 'mac os x 10.5.1' to 'mac os x 10.5.2'
i downloaded this update but when i restart the computer to install it, it loads approximately 7% then doesn't load anymore. when i try to download it again it doesn't download a new update it just jumps to restarting the computer to install it. this
-
How to perf tune Oracle SQL/XML query?
Hi all, I am using Oracle 9i and like to run the following Oracle SQL/XML query. It takes about 3+ hour and still not finish. If I get rid all the XML stuffs it only take minutes to run. Does anybody know how to what's the reason of this slow and how
-
Dear All, I have a requirement to trace a purchase order from a accounting document. I searched in tables - rbkp,rseg.. bkpf,bseg.. bsik,bsak.. But I couldn't. Can anybody help me? Best regards, Sridhar S
-
HI Guys, I have a requirement to call ABAP RFC from Message Mapping. Can any one pls share the document links or ideas with me. Thanks, MS