NQS Error: 47077 NQS Config .ini file was not found

Hi All,
I just installed OBIEE 11.1.1.7 on my windows 64 bit. And trying to install OBIA 7.9.6.4 on the top of this . While installing I am getting an error :
NQS Error : 47077 NQS Config.ini file was not found. Make sure your environment is set up properly.
Pleasw help me out guys.. I am new to this OBIA installation.

its a BUG
see this Installing BI Applications 7.9.6.4 on BI EE 11.1.1.7.0 (Doc ID 1561846.1)
Please down the attached file Technote1561846.1_InstallSecurity.zip and apply the solution.

Similar Messages

  • Sun One Directory Proxy unable to start error DPS.pid file was not found

    We finally able to install Sun One Directory Proxy 5.2 , but we are unable to start the Proxy server, we are getting error "Since the DPS.pid file was not found, DPS-server is assumed down
    Anybody has any clue / ideas that we would very help fulll?
    Thank

    I've been struggling with this and another problem with DPS for a couple of weeks.
    It generally starts up fine when you dont have SSL enabled. The moment you enable SSL, a couple of things go for a toss:
    1. The problem mentioned above surfaces. Are you facing this problem even without SSL?
    2. If you log into the Administration console, and try to make changes to the DPS configuration, it will give an error stating that "Error in writing to Configuration Directory". But apparently, it will manage to save things. Just that when you try to start it with SSL enabled, it won't. Neither from the command line, nor the GUI.
    Anyone managed to fix this? Sun informed us that there is a problem with Jars, but thats about it.

  • Getting authorization error message: Required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."  And I have no idea of where or how to fix this issue.  Any help or suggestions will be greatly appreciated.  I even tried to deauthorize this computer and got the same error message.  HELP!

    I used Terminal to change the permissions on the folder in question.  I followed the instructions in this article:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one.   I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable.  So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal.  Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal).  I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.)  And it fixed the problem right away.
    What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do.  It didn't mention Terminal.  What would really be helpful is if Apple included a link to a page like this in their error message.

  • I can't sync my macbook air with my ipad, problems with authorization... this keeps cropping up: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permi"

    Help, cannot sync completely with my ipad, and i also cannot remove or delete shared photos which are clogging up my ipad 64GB memory! Some issue with this keeps croppin gup, so frustrating:
    "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."
    Not sure how we can correct his permissions problem, and whether authorising or deautorizing makes any difference, with more and more errors keep popping up, this got to be such after an update of the OS, can remember which!?
    HELP!!!

    follow this:
    Launch iTunes
    select iTunes Store from the menu on the left side.
    sign in via the link on the top right area if you haven't done so already
    click the link where you Apple ID email appears, enter your Apple ID password, click View Account, this will take you to a page displaying detailed information about your Apple ID account.
    The last item under Apple ID summary should be Computer Authorisations, click Deauthorize All
    now reauthorize any computers as needed when the system prompts you.
    good luck.

  • I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss

    I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss
    how do I find the file and replace it or install it?

    I'll reload it tonight when I get home...basically, I bought a new iPhone and downloaded some new medical apps. also had to download an update for iTunes into my mac laptop so I could access iCloud (which was NOT on my prior iTunes software)
    When I synched my new iPhone with the newly downloaded iTunes, I registered my iphone and tried to "back it up" to iCloud and the message indicating that "the required file was not found or has a permissions error...." popped up.
    How do I correct the permissions error, or...am I able to do this somewhere? Or...how do I find the file that is missing?
    Dr. Bob001

  • I keep getting this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    I keep getting this messae when I try to share itune to my new mac The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
    iTunes: Missing folder or incorrect permissions may prevent authorization

  • TS1459 The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    please help me how to authorize my computer as it always say The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    Many thanks. If you're on Mac OS, let's try the following document:
    iTunes: Missing folder or incorrect permissions may prevent authorization

  • HT1848 I cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please hel

    cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me

    Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
    iTunes: Missing folder or incorrect permissions may prevent authorization

  • Error message: Could not complete your request because the file was not found.

    Tonight tried to open images in Photoshop CC 2014. Could not open any. Received the message "Could not complete your request because the file was not found."
    I installed latest updates yesterday. Today not working. Can anyone assist?

    Well, then you do want your layered file back and the nice thing about Macs, Time Machine does keep hourly backups on your Mac. You should be able to enter Time Machine and restore that file.
    I had hoped opening your file in another app might relase it so you could open it in PS.
    Gene

  • Error code: 0x80070035 The network path was not found

    "Error code: 0x80070035 The network path was not found" while trying to access another PC running Windows 7 Ultimate I searched and read dozens of similiar posts to try to resolve this issue with no success.
    The situation is, I have a router in home with 4 PC's connected. My central PC is running Windows 7 Ultimate. The others are Windows 7 Ultimate again, and 2 running XP Pro. No special Firewalls, just have Windows Firewall enabled on all PC's, and am running KasperskyInternetSecurity2010 on all. (Have disabled these on all PC's and tried to view/connect and it didnt make a difference, same error)
    Fact one: not attempting a Homegroup connection at all, just simply wishing to connect in a basic network environment where I can drag and drop files between all PC's in my Home Network or in my house , however its considered. But on the Windows 7 I am unable to view either of the XP's only the other Win7, and when I try to access that one is when I get the "Error code: 0x80070035 The network path was not found".  
    Furthermore, while troubleshooting the problem I opened a Command Prompt in all computers, then an "ipconfig" to view each ip address. Then began to ping each machine to determin connectivity. Which resulted in partial success. My main Win7 machine (which i am on now) was able to ping successfully to all machines. But all other machines were unable to ping to me (main Win7). with a 100% loss.
    So at least I determined this is most likely a helpful fact in resolving this. Going into "services.msc" I made sure that all the obvious services are started and running:
    DCHP Client, Homegroup Listener, Homegroup Provider, Link-Layer Topology Discovery Mapper, NetTcp Port SHaring Service, Network Connections, Network List Service, Network Location Awareness, TCP/IP NetBIOS Helper
    All strarted and running in Automactic mode.
    Not sure what other information I can give at this point, to help assist in fixing this problem. Please dont hesitate to ask for me for more info if needed. Ready and willing to try anything to get this working, except for reinstalling the OS. All my programs work great and do not wish to go through the drama ao reinstalling all my programs and activating them and redoing all my Adobe settings and CAD settings.
    Someone please help !

    Hi,
    In addition, I would like to suggest the following:
    Enable NetBIOS over TCP/IP:
    1.    Go to “Control Panel\Network and Internet\Network Connections”.
    2.    Right-Click on the connection and choose Properties.
    3.    Click “Internet Protocol (TCP/IP) Version 4” in the list.
    4.    Click Properties, and then click Advanced.
    5.    On the Advanced TCP/IP settings windows, go to “WINS” tab.
    6.    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
    Thanks.
    Nicholas Li - MSFT

  • I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2

    I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2.
    We have had itunes on this pc for 2 years and recently it wouldn't open and another error message kept popping up saying it couldn't open because MSVCR80.dll was missing. I have unistalled the apple programs and tried reinstalling several times but to no avail. Hopefully my music library is not gone. Any Ideas out there?

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • How do I fix Camera Raw in CS6? I get "Could not complete request because the file was not found"

    How do I fix my Camera Raw in Photoshop CS6? I tried to view an NEF file in CS6, but it said I had to update my Camera Raw to 7.3 (I had 7.0). I went online and the only thing I could find was to download 8.6 so I started with that, and installed something and it didn't work, and then it told me I couldn't download 8.6 because my OS X is not 10.7 ( I have 10.6.8). Now when I go back into photoshop it gives me this error "Could not complete request because the file was not found" and I cant open any jpegs in photoshop.  I have tried shutting down my computer, deleting caches, and uninstalling photoshop and reinstalling it. Still no luck. Any idea how I can fix this?

    Follow these instructions to manually update your ACR plug-in to ACR 8.3, which was the last version compatible with your OS:
    http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

  • Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

    I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
    Richard

    I thought I would add in another scenario, since this link came to the top of my list in the search engine.
    We are running 2008 R2 with SP1 (it happened without SP1 as well)
    We could not map using UNC (IP, FQDN, or netbios name).  We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
    In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
    You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
    And add LanmanWorkstation to Providerorder
    I found on a Citrix board that citrix has an issue with this as well
    If you're running VM  here is an additional step you should do as well
    When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
    > Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
    To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
    To workaround this issue, if you have already upgraded VMware Tools:
    Click Start >
    Run, type regedit, and click OK. The Registry Editor window opens.
    Navigate to
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
    Delete the reference to
    hgfs.
    Reboot the virtual machine.
    We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
    I hope that this saves people a lot of time.   I spent days researching this.
    This was the solution for me on 2008 R2 DC w/ Exchange.  I do not have VMWare installed but do have Hyper-V.  Thank you so much!

  • Could not complete this operation the. File was not found.

    I am running Illustrator CS6 on a Mac version 10.9.1. My problem is that when I try to "Save for Web" I get an error message of:
    "Could not complete this operation the. File was not found."
    What is it even talking about?!? It can save it normally, but not as a .jpg, .png, etc.
    I just restarted the program (but this isn't the first time I received this error). Now it says something new:
    Some names of the files being saved contain non-Latic characters. These file names will be incompatible with some Web browsers and servers.
    I simply named the file "6.png"
    That time it did allow me to save though. What is going on!??

    +1
    I am getting the same error message for "Save for Web" on Adobe Illustrator CS6 on my Macbook Pro Version 10.10
    "Could not complete this operation the. File was not found."
    Frustrating

  • Compilation error - FPGA NI PXI-7951R board - ERROR: Xst: 2472 - Top module Puma15Top was not found.

    I'm trying to compile a "user CLIP socket" for the NI PXI board - 7951R which has a Virtex-5 LX30 FPGA from Xilinx, but I got the bellow message from NI Compiler, this message is in error report Xilinx.log.
    It says that module Puma15Top was not found.
    But this module is a NI property and is automatically compiled by NI Compiler.
    The compiler automatically generates these files (Puma15Top...) that are passed to the compiler of Xilinx. The Puma15Top files are in the path, i.e: C: \ NIFPGA \ compilation \ Told_F_I_CC5DC260 \ source_files.
    This folder name is automatically generated by labview (Told_F_I_CC5DC260) for each different project or compilation.
    So I have no way to configure in CLIP files where it'll be Puma15Top, once the path is automatically generated during compilation by Labview.
    Does anyone have any idea how to solve this problem? Or have you experienced some like this?
    Following error log:
    ### XstSynthesis ###
    Puma15Top
    Reading design: Puma15Top.prj
    =========================================================================
    *                          HDL Compilation                              *
    =========================================================================
    Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_Conf.vhd" in Library work.
    Entity <CLUC001_Conf> compiled.
    Entity <CLUC001_Conf> (Architecture <behavioral>) compiled.
    Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_CLIP.vhd" in Library work.
    Entity <CLUC001_CLIP> compiled.
    Entity <CLUC001_CLIP> (Architecture <rtl>) compiled.
    Entity <CLUC001_CLIP> (Architecture <behavioral>) compiled.
    ERROR:Xst:2472 - Top module <Puma15Top> was not found.
    ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
    -->
    Total memory usage is 149596 kilobytes
    Number of errors   :    2 (   0 filtered)
    Number of warnings :    0 (   0 filtered)
    Number of infos    :    0 (   0 filtered)
    Process "Synthesis" failed
    Thanks in advanced!

    Hi Guilherme,
    Thanks your suggestion, I upgraded NI-RIO to 13.1.1 version but the problem persists, as shown below:
    Project: T_old.lvproj
    Target: F (RIO0, PXI-7951R)
    Build Specification: I_2
    Top level VI: I.vi
    Compiling on local compile server
    Compilation Tool: Xilinx 11.5
    Start Time: 2/9/2014 18:03:51
    Run when loaded to Fpga: FALSE
    JobId: z8Cq8B4
    Working Directory: C:\NIFPGA\compilation\Told_F_I2_F3177096
    Compilation failed due to a Xilinx error.
    Details:
    ERROR:Xst:2472 - Top module <Puma15Top> was not found.
    ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
    -->
    Total memory usage is 149596 kilobytes
    Number of errors   :    2 (   0 filtered)
    Number of warnings :    0 (   0 filtered)
    Number of infos    :    0 (   0 filtered)
    Process "Synthesis" failed
    Start Time: 18:03:51
    End Time: 18:05:19
    Total Time: 00:01:27,414
     Best,
    JEMP

Maybe you are looking for