[nQSError: 46044 error in obiee
Hi Team
When i am opening a developed report in in Compound layout i am getting [nQSError: 46044 error in obiee] ,whereas when the same report is placed in the dashboard it is giving the desired output.
So basically i am trying to say that , the report is coming up in the dashboard but when the same report is opened in the compound Layout it is giving [nQSError: 46044 error in obiee error.
Please suggest.
Thanks
Business Intelligence Foundation wrote:
Hi
Im getting below error in Bi11g. core application services is down.
Error:
[nQSError: 46066] Operation cancelled.
[nQSError: 46067] Queue has been shut down. No more operations will be accepted.
If anyone Know tell me.
Thanks and Regards
sathyaHi sathya,
It could mean several different things. Do you know if the administrator have shut down the services? If you have access to the server, check to see if all the services are up and running.
Thanks,
-Amith.
Similar Messages
-
NQSError: 47051 error on Windows cluster
I’m getting nQSError: 47051 while installing OBIEE cluster on windows.
Here’s the situation. We are installing OBIEE (10.1.3.4) on a two node (Windows 2003, SP2) cluster. The shared file system is built on a SAN using windows clustering. This windows SAN cluster is also attached to the primary OBIEE server as a local drive. All the shared files (Repository Publishing Directory, Cache directory etc.) are mapped to this cluster.
After the configuration the OBI Server doesn’t start and throws error
[nQSError: 47024] The Oracle BI Server participates in a cluster but errors were found in the cluster configuration file.
[nQSError: 47051] The Oracle BI Server is specified as participating in a cluster, but global cache file storage location, <My shared file location, is invalid.
I am perplexed since I (or the user owning OBIEE) can see this disk using ‘Windows explorer’ and read and right to it. Then what can be the issue with OBIEE server?
Funny thing is when I specify my local directory (the SAN cluster attached locally) as the cache location it works!
Interestingly I found out that there is a bug (6165192) on OBIEE 10.1.3.3 where simillar problem is listed. Not sure if that is still applicable to 10.1.3.4.
I noticed that we have all kinds of firewall (internally) between the servers. Can that block the OBIPS communication with the server to which the SAN disk is attached? If yes, then what Protocol is used for such a communication and on what port?
Did any of you face similar situation? If yes, then what was your resolution?
Any help on this will be greatly appreciated.Hi,
In our environment we have installed OBIEE 10.1.3.4 on two windows servers(primary and secondary) and these servers not clustered using Microsoft or any other cluster software .
We are planning to use SAN drive to hold the shared cache, now we are facing a challenge in configuring the SAN to see from both OBIEE servers, is it possible to use the SAN with out installing any cluster between these servers.
I understood from above post that you guys implemented/installed OBIEE on Windows environment with SAN.
Is it possible to have a quick call. Your help is greatly appreciated.
Thanks -
Column Formula with Error in OBIEE 11g
Hello,
On Oracle Business Intelligence Enterprise Edition 11g, I am trying to create an analysis. The database is MySQL. In the database, there is a field of type varchar(10). This
field shows a date. In OBIEE 11g, when creating the analysis, in the Criteria tab, I choose this column (varchar) and edit the formula of it. The operation that I want to do is:
YEAR(CURRENT_DATE) - SUBSTRING("TableName"."ColumnName" FROM 1 FOR 4) where the ColumnName is the name of the column of type varchar(10)
but I get an error: +[nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <->: Syntax error [nQSError: 26012]+
If I execute the same query directly on the MySQL database, I get the desired result without any error.
Also, if I use the following formula, I also get an error:
CAST((SUBSTRING("TableName"."ColumnName" FROM 1 FOR 4)) AS INTEGER)
So, I am asking why the first query throws an error in OBIEE 11g but not when it runs directly on the MySQL database. Also, how can I convert in OBIEE 11g a string to integer?
Thank you in advance,
GriseldaBusiness Intelligence Foundation wrote:
Hi
Im getting below error in Bi11g. core application services is down.
Error:
[nQSError: 46066] Operation cancelled.
[nQSError: 46067] Queue has been shut down. No more operations will be accepted.
If anyone Know tell me.
Thanks and Regards
sathyaHi sathya,
It could mean several different things. Do you know if the administrator have shut down the services? If you have access to the server, check to see if all the services are up and running.
Thanks,
-Amith. -
Essbase data crossjoin error in OBIEE analysis report
Hi all,
Anyone got the following error in OBIEE analysis report:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 96002] Essbase Error: Syntax error in input MDX query on line 13 at token 'crossjoin' (HY000)
The OBIEE version is 11.1.1.6.2
Data is from Essbase Cube, version 11.1.2
The report is a simple cross tab table and we added 'After' aggregation to show grand total.
The error show up when we drill down on dimension, click '+'.
However, if I remove the 'After' aggregation. There is no error at all
Thank you
BCHKHi veeravalli,
Thank you for you reply. I got it.
However, any idea to solve the issue?
I tried to do it in RPD by case when,
e.g. Acutal Sales: case when scenario='Actual' then salesamount end
Budget Sales: case when scenario='Budget' then salesamount end
Actual/Budget%: (Actual Sales/Budget Sales) *100
So there is no error, Actual Sales and Budget Sales are correct, but Actual/Budget % shows nothing in report
Thanks.
BCHK -
Query Failed: [nQSError: 46036] Internal Assertion ( OBIEE error)
Hi Friends.
Did anyone faced this problem. I am using custom filters on reports. The reports work well for 5 filters but start giving error on last filter. As far as I can guess its an internal OBIEE optimizer error. Can anyone faced this problem and help
A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46036] Internal Assertion: Condition pCond, file server\Query\Optimizer\Request\Src\SQORRqList.cpp, line 2604.Please have your System Administrator look at the log for more details on this error. (HY000)We faced same problem. There is no clear definition of error even we increase log trace level to 7.
Query Status: [nQSError: 46036] Internal Assertion: Condition pCond, file server\Query\Optimizer\Request\Src\SQORRqList.cpp, line 2716. [[
We will open a ticket to Oracle Support. -
OBIEE 11G [nQSError: 17001] ERROR
Hi Experts,
I've installes OBIEE 11g & upgraded the existing OBIEE 10g RPD & WebCat to the 11g but when i try to see the dashboards & reports i get the following error.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
I've already tested the database connection using the Oracle SQL PLUS ,i'm able to connect to database.
Please let me know what changes need to be donw in the RPD.
Regards,Hi,
Try putting the tnsnames.ora of your local db client in the following directory: <obi 11g install dir>\Oracle_BI1\network\admin. Looks like OBI11g comes with an Oracle client install or something.
Regards -
NQSError: 10058 - Unable to Navigate Requested Expression Error in OBIEE
We are getting the below error when we try to generate report using a dimension column and a fact column.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: FILTER(# of Responses:[DAggr(Fact - Leads & Interest .# of Responses by [ Dim - Contact.First Name, Dim - Contact.ROW_ID, Team & Opty Based Org.POSTN_WID, Team & Opty Based Org.Level 1 Employee Name, LN Leads & Interest.ROW_ID] SB Revenue Attributes Total,Sales Velocity Attributes Total)] USING Team & Opty Based Org.Level 1 Employee Name <> 'Test, USLMMarketing' and (LN Leads & Interest.Customer Supplied Email <> email@removed ' or LN Leads & Interest.Customer Supplied Email is null)). Please fix the metadata consistency warnings. (HY000)
We are using the below logical formula for the measure column.
FILTER(Core."Fact - Leads & Interest "."# Of Response Final" USING (Core."LN Leads & Interest"."Customer Supplied Email" <> email@removed ' OR Core."LN Leads & Interest"."Customer Supplied Email" IS NULL ) AND Core."Team & Opty Based Org"."Level 1 Employee Name" <> 'Test, USLMMarketing')
We have this measure in a logical fact table.
Please help me know why would this error occur.Sorry i missed while pasting the formula. Below is the logical column formula.
FILTER(Core."Fact - Leads & Interest "."# Of Response Final" USING (Core."LN Leads & Interest"."Customer Supplied Email" <> '[email protected]' OR Core."LN Leads & Interest"."Customer Supplied Email" IS NULL ) AND Core."Team & Opty Based Org"."Level 1 Employee Name" <> 'Test, USLMMarketing')
This measure is working properly with other dimension attributes in the subject area. -
Query is allocating too large memory error in OBIEE 11g
Hi ,
We have one pivot table(A) in our dashboard displaying , revenue against a Entity Hierarchy (i.e we have 8 levels under the hierarchy) And we have another pivot table (B) displaying revenue against a customer hierarchy (3 levels under it) .
Both tables running fine under our OBIEE 11.1.1.6 environment (windows) .
After deploying the same code (RPD&catalog) in a unix OBIEE 11.1.1.6 server , its throwing the below error ,while populating Pivot table A :
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
*State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 96002] Essbase Error: Internal error: Query is allocating too large memory ( > 4GB) and cannot be executed. Query allocation exceeds allocation limits. (HY000)*
But , pivot table B is running fine . Help please !!!!!
data source used : essbase 11.1.2.1
Thanks
sayakHi Dpka ,
Yes ! we are hitting a seperate essbase server with Linux OBIEE enviorement .
I'll execute the query in essbase and get back to you !!
Thanks
sayak -
Email configuration error in OBIEE 11.1.1.6.2
Hi,
I am getting the below error, while running the agent in obiee
Eventually succeeded, but encountered and resolved errors...
Number of skipped recipients: 3 of 4
AgentID: /users/weblogic/test agent
[nQSError: 75025] Handshake failed when connecting to SMTP server using SSL. AgentID: /users/weblogic/test agent
...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/weblogic/test agent
[nQSError: 75025] Handshake failed when connecting to SMTP server using SSL. AgentID: /users/weblogic/test agent
...Trying SMTP Delivery loop again... Sleeping for 5 seconds. AgentID: /users/weblogic/test agent
[nQSError: 75025] Handshake failed when connecting to SMTP server using SSL. AgentID: /users/weblogic/test agent
...Trying SMTP Delivery loop again... Sleeping for 8 seconds. AgentID: /users/weblogic/test agent
[nQSError: 75025] Handshake failed when connecting to SMTP server using SSL. AgentID: /users/weblogic/test agent
Exceeded number of SMTP delivery retries.
Please help meHi,
It looks SMTP server is under firewall.
Could you please telnet your smtp server ip and host.
In linux or Unix try to executer below command.
$ telnet smtpserverip port.
Hope this help's
Thanks
Satya -
Filter Error in OBIEE version 11.1.1.7.0.
String repSQL = report.generateReportSQL(reportRef, rp, m_sessionID);
The “Filterexpression” is working well for the OBIEE Version 11.1.1.6.0 but it is not working for OBIEE Version 11.1.1.7.0.
(i.e) While i try to run “Filterexpression” in for OBIEE Version 11.1.1.7.0. , i get the following errors
AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server faultSubcode:
faultString: Assertion failure: pMatchFilterFromPropBag != 0 at line 3051 of roject/webreport/globalfilterutils.cpp faultActor: faultNode: faultDetail:
{com.siebel.analytics.web/soap/error/v1}Error: <sawsoape:Code>ACIOA5LN</sawsoape:Code>
<sawsoape:Message>Assertion failure: pMatchFilterFromPropBag != 0 at line 3051 of project/webreport/globalfilterutils.cpp</sawsoape:Message>
<sawsoape:File>globalfilterutils.cpp</sawsoape:File>
<sawsoape:Line>3051</sawsoape:Line>
Assertion failure: pMatchFilterFromPropBag != 0 at line 3051 of project/webreport/globalfilterutils.cpp
ead.run(SimpleThreadPool.java:557)I have exported ODBC path manually.
export ODBCINI=$ORACLE_INSTANCE/bifoundation/OracleBIApplication/$ORACLE_BI_APPLICATION/setup/odbc.iniAnd then executed the nqcmd command. Now I am getting the different error.
Oracle BI ODBC Client
Copyright (c) 1997-2011 Oracle Corporation, All rights reserved
Initialize client environment failed, possibly caused by incomplete installation
[nQSError: 47001] Invalid Oracle BI Bin directory:
/oracle/home/bifoundation/server/bin.
Initialize client environment failed, possibly caused by incomplete installation
[nQSError: 47001] Invalid Oracle BI Bin directory:
/oracle/home/bifoundation/server/bin.
[0][State: IM004] [DataDirect][ODBC lib] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed Connect open failed -
Error in OBIEE Reports.ORA-01445
When making some formula or adding new columns,I am getting the following Err..
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 1445, message: ORA-01445: cannot select ROWID from, or sample, a join view without a key-preserved table at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
Its something related to joins.Can anyone Help.
Edited by: Darwin S on Aug 22, 2009 8:48 PMyou should post this on the OBIEE forum Business Intelligence Suite Enterprise Edition
-
No script engine supported for 'JScript' error in OBIEE 11G ibots
Infrastructure: 64 bit OBIEE 11.1.1.5 on 64 bit Red-Hat Enterprise Linux 5.6
We tried using *.java to export the delivery content of an 'Agent' and place it in a shared folder on Windows.
We are able to use the .java file directly in putty and it works fine in creating a folder and copying the file from source to target, but when we put the same script as part of the actions in the 'Agent' properties, its fails with the error "[nQSError: 66023] No script engine supported for 'JScript'". The e-mail is triggered and the attachment is delivered fine.
We tried the same with a *.js file. The error is the same. I found people using *.js scripts and they say it worked for them at Re: How to send the content of an agent (PDF Report) to local machine in 11g
But I am not sure what are the other settings that should be done. The error seems very basic and fundamental and has something to do with java interpreter or something.
Any help if you have implemented the same, would be greatly appreciated.
Thanks!That example in the link shows creating an action at the end of 'Agent'. I am not sure if that is what the user meant by 'create an action'. If the user meant to create an 'action', how does and where we call that action at the end of an 'Agent'?
I did try creating an action by updating the 'UserScript.js' file, but the moment i update the file with a custom function, the server doesnot recognise the UserScript.js file anymore and i cannot even use the default functions in UserScript.js file. -
Hi All,
I'm facing an error with my Case statement in OBIEE(using it in expression builder in RPD). Below is the statement.
CASE WHEN"GCRMANDB".""."HIM_SRV_REQ_DIM"."ATTRIB_44" = 'Customer Demand Not In GDMS' OR GCRMANDB"."HIM_SRV_REQ_DIM"."ATTRIB_45" = 'Customer Demand Not In GDMS' THEN 1
(WHEN "GCRMANDB".""."HIM_SRV_REQ_DIM"."ATTRIB_44" = 'Poor Behaviour / Attitude' OR GCRMANDB"."HIM_SRV_REQ_DIM"."ATTRIB_45" = 'Poor Behaviour / Attitude' THEN 1) ELSE 0 END
Error message that i'm getting is:
[nQSError: 27002] Near <">: Syntax error [nQSError: 26012] .
Plaese helpTry this
CASE
WHEN "GCRMANDB"."HIM_SRV_REQ_DIM"."ATTRIB_44" = 'Customer Demand Not In GDMS' OR GCRMANDB"."HIM_SRV_REQ_DIM"."ATTRIB_45" = 'Customer Demand Not In GDMS' THEN 1
WHEN "GCRMANDB"."HIM_SRV_REQ_DIM"."ATTRIB_44" = 'Poor Behaviour / Attitude' OR GCRMANDB"."HIM_SRV_REQ_DIM"."ATTRIB_45" = 'Poor Behaviour / Attitude' THEN 1
ELSE 0 END
Mark if helps -
Customizing ODBC errors in OBIEE 11g
Hi,
I have a requirement where the user is expecting to see some Custom error messages instead of the Default ODBC errors OBIEE throws. Like the one below.
Error generating view. Error getting cursor in GenerateHead
Error Details
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22055] First argument of Parent function must be a hierarchy in a Parent-Child dimension with a single column Member Key. (HY000)
Where i can find the files which has these messages.They should be on some .xml or Java file on the server. If i know that location, i can change the error into Custom error messages.
Any help would be really appreciated.
Thanks
SwamiSwami,
These kind of custom error messages,You need to do it manually for each report
Edit Analysis Properties ---- Results Display ----- Display Custom Message
Mark if you helps,
Thanks, -
View Display Error in OBIEE with Essbase Cubes
Hi All,
Currently we are generating the Reports from Essbase Cubes.
We have an hierarchy in OBIEE and when we are trying to drill down one hierarchy(Tech Executive) we are getting below Error.
" Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Unknown Member [H1_Rel_TecExec_Ini_appl].[Unknown] used in query (HY000)
SQL Issued: SELECT s_0, s_1, s_2, s_3, s_4, s_5 FROM ( SELECT 0 s_0, "Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Initiative Name" s_1, "Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Tech Executive" s_2, SORTKEY("Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Initiative Name") s_3, SORTKEY("Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Tech Executive") s_4, "Defect7M"."Defect7M#1"."Defect7M - measure" s_5 FROM "Defect7M" WHERE ("Defect7M"."H1_Rel_TecExec_Ini_appl"."H1 Tech Executive" = 'Unknown') ) djm "
Can someone assist me how to resolve this error
Thanks,
SatyaBSatya,
Have you done anything to modify the essbase drill logic within your BMM?
Remember when modeling essbase you should just try to use the defaults first to ensure that all works correctly the first time through. Then you can adjust any hiearchies, federate, etc.
Maybe you are looking for
-
Error loading csv file from application server
Hi all, While uploading a csv file from the application server to psa we are getting the following error, Error 2 while splitting CSV data record Message no. RSDS_ACCESS011 Diagnosis Error 2 occurred while splitting the CSV data record 1 1 = Could no
-
I have an Ipod Tocuh which just had a software update to it. The screen is stuck on the IOS6 screen an I can not go any further.
-
BAPI for Maintain Scheduling line agreement
Dear ABAPer, I am using SAP version ECC 5.0. I want to develop Change Scheduling line agreement enhancement. my requirement is, any BAPI is there for the same. if you have any idea, please help me. thanx. with best regards, Velmurugan.S
-
I am at a loss: bcc removal and messages appearing on other POP3 accounts!
Greetings! 2 problems with Mail (version 4.2 1077 - Mac OS Snow Leopard 10.6.2) 1. For the life of me, I do recall at some point recently making my mail bcc to myself (I just wanted to make sure of what some attachments looked like to their destinati
-
Time machine restore returns only empty folders
I need to restore several folders with lots of files within. When entering TM, I see the files and folders. Selecting on one or several folders and clicking restore, copies only the first and empty folder over. I can repeat this by going back to TM,