NRM won't run after restart

I was monitoring an oes2sp2 linux srvr with NRM (this is a vm on a xen kernal) when the cpu utilization went up to 100%. I discoverd that the httpstkd process was causing the high utilization. So I issued a restart using the rcnovell-httpstkd restart. Now NRM won't launch and viewing the action using top I can't see the httpstkd process running. I haven't tried a restart on the server but that seems like the last resort.

jmcg,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Calculation Script... won't run after restart of acrobat

    I added a custom calculation script to a field. Works like a charm.
    However if I restart acrobat the script refuses to run. I go in and confirm the script is there.
    If i go in an just add a space or a comment to the script it will start running again.
    Any ideas?
    I also saved the PDF and opened it in reader on another machine. Won't run there.
    So I attached it to an onfocus event and that seems to work fine after saving??
    So I then tried adding a "simplified field notation" and the same behavior exists there. If i restart acrobat the only way i can get the simple notation to run is if I remove it and then re-add it. Otherwise it does nothing.
    Am I missing something obvious?
    Thanks in advance.

    George,
    I wasn't clear enough. The script does nothing. Editing values of text boxes that would trigger the calculation to occur will not run until after I have edited the script. (something as silly as just adding a comment will cause it to work again)
    For the simple calculation I need to remove it completely and add it again before it will work
    Here is an example for a net worth box:
    Add to "simple field notation"
    assets - liabilities
    Then I hit ok and whenever I add in some liabilities or assets those 2 fields are updated and my networth field is updated. Thats works great
    I save the file and then open it back up and add some liabilies/assets and the fields I used the built in "sum" function on continue to work (assets and liabilities) however my "simple field notation" does not update my networth field.
    I go back into field designer and verify that the simple field calculation radio box is still selected and that it still says
    assets - liabilities
    It continues not to run. I then go back in and edit it to remove the calculation.
    I then open it up again and select "simple field notation" and type in
    assets - liabilities
    This then works immediately and i am happy again until i save/restart acrobat (or try to open the PDF on another PC)
    Then I am sad again because the script doesn't run.
    I tried all these same steps with a JavaScript too. It will work until acrobat is restarted. If i edit the script by adding a space or comment it will start running again.
    So frustrating! Any help is appreciated.

  • Safari won't run after restart

    Running Mountain Lion on my Macbook Pro 17" unibody.  Just did a CarbonCopyCloner back-up, then restarted the machine.  Noticed my Safari icon in the dock looked weird (generic note icon). Went to my apps and noticed the Safari.app icon looks the same (no Safari icon... only a generic note icon) and Safari won't launch at all from the Safari.app.
    I primarily use Firefox and Chrome, so loosing Safari is no biggie, but I'd like to know what the heck happened after restart.  Any clues?
    Thanks!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • AE CS6 won't run after the Mavericks 10.9.3 update

    My AE CS6 won't run after the Mavericks 10.9.3 update the other day. I was prompted that the current version of my AE was 11.0, so I searched and found the seemingly most up-to-date here: Adobe - After Effects : For Macintosh : Adobe After Effects CS6 11.0.4 Update : Thank You
    My question is this: since I'm new to Mac, should I download the update and install it to my existing instance of AE and it will allow AE CS6 to run as normal? And the way to install the update is simply to double-click the .dmg?
    Thanks!

    Instructions for installing the update are on the download page here:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5696

  • Itunes won't run after download

    itunes won't run after download. simply asks to acknowledge agreement which I did. help

    You appear to be able to backup your contacts without iTunes.  Google "backup iphone contacts without itunes".
    The way to avoid having to get a tech person in is to get past the idea that your problem (which you still haven't defined) is "beyond my ability to fix".  ;-)

  • Safari 3.0.2 won't run after 3.0.1 worked fine

    Safari 3.0.1 was working fine for me on win xp pro after copying fonts to address text problem. I downloaded 3.0.2 and installed. the install appeared to work fine, but when I try to run safari, i get no error and it won't run. I've turned off firewall & AV software, etc. I have uninstalled and re-installed. I even tried reinstalling 3.0.1 after uninstalling 3.0.2. all to no avail. any suggestions?
      Windows XP Pro  

    just a suggestion but have you tried cleaning safari from your registry?? The reason I ask is because if you save bookmarks then uninstall safari and then reinstall it still has your bookmarks, so not all files are being deleted upon uninstall. Don't know if that helps you but its worth a try

  • ITunes won't run after downloaded.

    I downloaded iTunes to Windows XP successfully, but it won't run when I attempt to open it. Nothing happens. My iPod should arrive in a week and I want to have iTunes prepared to transfer songs ASAP!
    Why won't iTunes open after I've successfully downloaded it??!!

    ...ok, I downloaded iTunes 6.0 and it worked fine until my iPod cam and it said I needed version 7.0 or higher to transfer songs[thanks a lot apple].

  • HTML DB won't run after Install

    I've installed htmldb twice using the htmldb_1.6.0.zip file. In both instances it won't run, with identical behavior. Here's my configuration:
    dads.conf:
    Alias /i/ "C:\oracle\product\10.1.0\MT\Apache\Apache\images/"
    <Location /pls/htmldb>
    SetHandler pls_handler
    Order deny,allow
    Allow from all
    AllowOverride None
    PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
    PlsqlDatabasePassword ######
    PlsqlDatabaseConnectString localhost:1521:dev
    PlsqlDefaultPage htmldb
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDocumentPath docs
    PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
    PlsqlAuthenticationMode Basic
    PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
    </Location>
    marvel.conf:
              <Location /pls/htmldb>
              SetHandler pls_handler
              Order deny,allow
              Allow from all
              AllowOverride None
              PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
              PlsqlDatabasePassword ######
              PlsqlDatabaseConnectString 127.0.0.1:1521:dev
              PlsqlDefaultPage htmldb
              PlsqlDocumentTablename wwv_flow_file_objects$
              PlsqlDocumentPath docs
              PlsqlDocumentProcedure wwv_flow_file_manager.process_download
              PlsqlAuthenticationMode Basic
              PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
              </Location>
    Error Log:
    [Wed Apr 06 16:03:43 2005] [notice] FastCGI: process manager initialized
    [Wed Apr 06 16:03:50 2005] [error] [client 127.0.0.1] [ecid: 1112825030:192.168.1.6:4040:3216:1,0] mod_plsql: DAD '/pls/htmldb' is disabled because of misconfiguration. Please refer to the log entries during server startup up for more information.
    [Wed Apr 06 16:03:50 2005] [error] [client 127.0.0.1] [ecid: 1112825030:192.168.1.6:4040:552:1,0] File does not exist: c:/oracle/product/10.1.0/mt/apache/apache/htdocs/favicon.ico
    The file favicon.ico does not exist anywhere in the oracle directory tree. I can log into my database using sqlplus and the username/password listed in the dads.conf. I don't see anything else that I should check...any ideas?

    418849,
    favicon.ico is not the issue
    I see two issues:
    1) If both dads.conf and marvel.conf are included in the Apache configuration, then that will be an error as you cannot have two Database Access Descriptors defined with the same name.
    2) You're missing the 'ServiceNameFormat' string after your value for PlsqlDatabaseConnectString.
    Joel

  • Lightroom 5.5 and Photoshop CC 14 won't run after installing

    I tried installing the Lightroom and PS upgrades through the Creative Cloud installers - they install but won't run.  Lightroom won't start at all now and PS starts, gets to the main window and immediately shuts down.   I've restored, reinstalled, uninstalled all old versions, run CC cleaner multiple times sucessfully - nothing has worked.
    Help is appreciated.
    Thanks

    http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately-launch.html

  • MiniDVI with Dual Link won't display after restart

    I have a bizarre problem I can't find and hope to get some help.
    I have a brand new late 2009 Mac Mini 2.53Ghz with 4Ghz of RAM running OSX 10.6.1 and Vista Ultimate 32bit via Bootcamp 3.0 drivers.
    I have the Mini DVI Dual Link adapter so I can use my 30" Apple Display.
    When I run Vista Ultimate, the display works fine, unless I run a restart to reboot Windows. When that happens, the mini seems to cycle just fine, but there is no video on the monitor. Sound works fine, and nothing seems amiss with the Mac Mini except that there is no video.
    If I then cut the power to the Mac Mini (not a nice thing to do!), when power comes back it reboots and the display works fine with full video.
    This must be some foolishness associated with the use of the Mini DVI output into the Mini DVI Dual Link adapter, but there is no other choice in the matter with the latest Mini.
    Any suggestions?

    I purchased the same computer: 2009 Nov 16, Mac Mini, 4GB RAM.
    Computer runs great with the dual-link video adapter connected to my 30" Apple display.
    I installed Boot Camp 3.0, Windows 7 32 bit (Business).
    The video driver (by default is a 2006 Microsoft version) and only support a max resolution of 1600 x 1000 (aprox - sorry not in front of it at the moment).
    I downloaded and installed the latest Windows 7 driver from nvidia to hopefully correct the problem, but matters worsened, with the max resolution dropping to 800x600. I backed out the latest Nvidia driver and am back to the Windows default - which is OK, but not nearly the resolution that I paid for and presently enjoy with MAX OS X.
    Does anyone have a solution?
    Thanks

  • ITunes 7 won't run after reinstalled XP MediaCenter & reinstall iTunes7

    We made backup copies of the iTunes folder on an external HD, then reinstalled WinXp MediaCenter (not full clean install) and moved iTunes files back from the external HD, then reinstalled new iTunes 7; however, it won't run now. When we click on the icon, it just says "iTunes has encountered a problem and needs to close, we are sorry for the inconvenience. If you are in the middle of something, the information you were working on might be lost. Please tell Microsoft about this problem. We have created an error report that you can send to us." We've tried reinstalling iTunes many times. We've turned Antivirus & Wndows firewall off and on when installing, but no difference.
    Anyone got any suggestions because my wife and 2 teenagers are lost without their iTunes and iPods.
    Thanks,

    Someone in a different forum said to be sure that iTunes is installed under the primary user with Administrator Privileges. I'm pretty sure I did that, but I'll try it again to see what happens.

  • Programs won't run after update to 10.6.7

    Hi
    I have just inherited an early 2008 iMac following my Dad's death a few months ago. So I have no Mac experience at all. On receiving it, I booted it up and a list of recommended software updates appeared which I ran, and by all accounts successfully installed. One of them was an update to 10.6.7
    Previous to the update I could access the installed programs. Now I can access barely any of them.
    Error message reads:
    Application name cannot open.
    Check with the developer to ensure this version of application name works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS.
    There aren't any further updates needed. Every time I check, I'm advised everything is uptodate. So last night I reinstalled iTunes, downloading the latest version. That won't run. Same error message.
    I'm unsure what to do now. I don't have any disks etc at the moment as Mum is still trying to locate them (they had more than one property and this has come out of one that has been boxed up and put onto the market).

    This is a typical error report. The section I have bolded out seems to be common in all the errors.
    Process:         iTunes [500]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         ??? (???)
    Build Info:      iTunes-10221201~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [105]
    Date/Time:       2011-05-11 06:38:32.490 +0100
    OS Version:      Mac OS X 10.6.7 (10J869)
    Report Version:  6
    Interval Since Last Report:          15167 sec
    Crashes Since Last Report:           305
    Per-App Crashes Since Last Report:   6
    Anonymous UUID:                      DCCD367C-006F-4EEF-8457-3885D045DBBE
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: no suitable image found.  Did find:
              /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
              /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
    Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.9)
    Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HDP725032GLA380, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-875
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0xfd400000
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x5d100000
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1a100000
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x820f, 0x1a110000

  • Captivate 5.5 - SCORM Project won't run after Captivate 7 installation

    Good afternoon,
    I had completed a Captivate 5.5 project for a few months and as of about a month ago I have had Captivate 7 installed on the machine. Due to some widgets that are implemented in the project that only run in 5.5, I have not used Captivate 7.
    I also have not had cause to reopen the project until recently to make some changes. However, now when I publish the files, package them in the MultiSCO Packager, and put them in CMS  - it won't run.
    I've verified that the CMS is not the issue: if I repost the pre-Captivate 7 version it works just fine and the only changes I made to the original files were cosmetic and minor.
    Now when I republish the files in 5.5 and package them, the files look different, publishing all of the zips into a "Linear" subfolder. I couldn't help but notice that this is the same as Captivate 7 publishes except without any accompanying XML files. Why would Captivate 5.5 be affected by Captivate 7 being updated on the machine?
    Is there any solution to this other than having to open the 5.5 files in 7 and replace every widget? This is a huge expenditure of time when I was under the impression that if 5.5 was still installed it would run completely independent of the Captivate 7 changes.
    Any help would be appreciated,
    Jaimeson

    Don't be too quick to write off the LMS/CMS as the issue.  You need to be aware that with Cp6 Adobe totally revamped their SCORM drivers so there is now little similarity between output of 5.5 to 7 in this area.  It is also no longer possible to use Cp7 SCORMs in the Cp5.5 era Multi-SCORM Packager tool.  They are not compatible.  You must make sure the CP7 SCORMs are matched with the Multi-SCORM Packager that came with Cp7.
    Once you get compatible SCORMs published, try uploading them to SCORM Cloud LMS to test.  If they work fine on SCORM Cloud then they should work on your CMS (if it is truly SCORM compliant).
    Your issue with the widgets not working in Cp7 might be resolvable if you update the widgets.  Have you checked with the original widget developer to see if they have updates available?  If you have several widgets of the same type and version in each project file, then there is a trick to updating all of them in one go (per project file).
    See the heading in the lower part of this page:
    http://www.infosemantics.com.au/adobe-captivate-widgets/widget-updates
    But be warned that this only works if the widget filename is exactly the same, and you are doing this from the same computer that was used to originally insert the same widgets, because the path to the external widget file must be replicated.

  • ITunes 10.5 won't run after install

    Have done a clean install of 10.5 twice now ie uninstalled all apple software and reinstalled iTunes. After restart iTunes starts to load and freezes locked out all Internet  access as well.
    Any ideas?

    I have solved the problem with iTunes 10.5 will not install on Windows 7 64 bit.  I used Windows Installer Cleanup Utility available from softpedia.com to uninstall the offending program.  It is the Apple Software Updater that would not uninstall from the Control Panel.  I uninstalled all Apple iTunes 10.4, Quicktime and BonJour etc.  and the Apple Software Updater would not uninstall, so the Windows Installer Cleanup 2.5 Utility did the job.  Poor design of an Apple uninstaller.

  • Audigy 2 ZS Diagnostics Won't Run After Driver Upd

    Diagnostics worked fine until I updated mu Audigy 2 ZS drivers to the latest version; 02.08.0004. I'm running XP Pro SP2. Followed the Creative update instructions to the letter. Downloaded the update package to my machine. Nothing else was running when I executed the update package. Even disabled network and then my AV. Now Diagnostics gets as far as the hardware Wave test then just literally disappears. No error messages, no application or process hangs showing in task manager and no errors showing up in XP event viewer.
    Tech Support says this shouldn't indicate that anything else is effected as long as the sound works, which it does. They couldn't explain why it won't run.
    My question: is there some way to safely delete this program? Since it doesn't work anymore it's useless and just taking up space.
    Thanks in advance for any help provided.

    I had the same problem but here is the solution (at least it worked for me)
    Click on Windows Start button. Select Run. Type in Regedit and click OK to run it. Navigate to to the node "HKEY_LOCAL_MACHINE\<EM>Software\Creative Tech\Software Installed</EM>" and delete the node. Then navigate to the node "HKEY_LOCAL_MACHINE\<EM>SOFTWARE\Microsoft\Windows\CurrentVersion\Unin stall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977</EM>" and delete the node.

Maybe you are looking for