NRW-files in PSE 7

Hello,
Bought a new Nikon camera: Nikon Coolpix P7700. Try to open this NRW (RAW)-files in PSE7 and PSE10.
In vain: Got the following message: (Translated from Dutch in English: Cannot open this ...NRW-file because of a wrong file type).
I downloaded RAW-type 8B1. NEF-files from my D300 work well.
NRW-files open normally in Lightroom.
Adobe DNG-converter doesn't regognize the NRW-files.
Can anyone help me out?
(Work with Windows 7 prof.)

Good day!
This Forum is not dedicated to Photoshop Elements, but Photoshop.
You may want to try
http://forums.adobe.com/community/photoshop_elements
Adobe DNG-converter doesn't regognize the NRW-files.
If Lightroom can process the files but DNG-Converter can’t are you sure the latter is up-to-date?
Regards,
Pfaffenbichler

Similar Messages

  • Open Nikon NRW Files In PSE 10

    What do I need to do to open Nikon NRW (raw) files in Elements 10?

    The Nikon Coolpix P7700 is newer than PSE10 can be updated to support.  Specifically, the P7700 started to be supported with Adobe Camera Raw version 7.2.  PSE10 only was updatable to ACR 6.7, I believe, so to read your P7700 files in PSE, you need PSE11. 
    An alternative is to convert the NRW files to DNG files using the current Adobe DNG Converter and open the DNGs in older camera-raw versions.  You will want to be sure to set the DNG Compatibility options in the DNGC to something that ACR 6.7 can understand, which would be ACR 6.6, not the ACR 7.1 that it defaults to the first time you run it.
    You can download the current DNG Converter, from the regular Adobe Updates page:
    http://www.adobe.com/downloads/updates/

  • Can Nikon's P7700 NRW files work in PSE?

    Can Nikon's P7700 NRW files work in PSE7, using some plug-in, or something? I love PSE7 and do not want to upgrade (used PSE11 few times on frieds computer, and did not like it at all).
    So far I've been convering files using Nikon's ViewNx2 to TIFF - which work OK, but Camera RAW on PSE7 would be better and easier (and faster) to use, then normal editor, which I have to use with TIFFs.
    Thanks

    You'd have to use the free Adobe DNG converter to convert your RAWs to DNG.
    Or upgrade to PSE12

  • How can I remove .nrw files from my NOKIA Asha 200...

    When I am connecting my NOKIA Asha 200 with my PC by data cable, I am watching almost 50 nos. *.nrw files inside the Image folder. I tried to delete all those file, but I was unable. Is there any one, who can tell me how to remove those files from my phone memory?
    Thanks & regards,
    Sudip Sinha.
    Calcutta.
    India.

    Back-up your data and then Factory Reset your phone ...(Menu-->Settings-->Restore Factory settings-->Settings only.. followed by 12345 which is default security code, unless set by you) .. When the phone reboots, check whether these .nrw files are now converted to .jpg .. If so, you should be able to delete them now ...

  • Using PSE 10 on Windows. Can no longer open files in PSE 10?

    Have used PSE 10 successfully for quite awhile. Can no longer open files in this program. Choose, "open file" in PSE 10 and nothing happens.

    I'd try
    set myFilePath to POSIX file "/Users/Shared/ENGR/sketch/Artists/daleb/16.0/New1/ANNIE_SUB_COMPLETE /31.5-058.psd"
    tell application "Adobe Photoshop CS6"
      open alias myFilePath
    end tell

  • How to open NRW-files in Lightroom 4?I

    just bought Nikon's Coolpix P7800. It says you can shoot in Raw. Now I want to open these files in LR, just like I'm used to with my SLR's. But Nikon uses the NRW-format for Raw and LR says it doesn't recognise the files. Does someone know if there's a way to convert and work with these files in LR 4?

    Thanks Jim for your response,
    I will upgrade to 5.3
    Kind regardsEut van Berkum
         Op woensdag 28 januari 17:04 2015 schreef JimHess <[email protected]> het volgende:
    how to open NRW-files in Lightroom 4?I
    created by JimHess in Photoshop Lightroom - View the full discussionThe only way to use those files with Lightroom 4 is to convert them to DNG using DNG converter 8.3 or higher. The camera wasn't supported in Lightroom until version 5.3. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7140310#7140310 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7140310#7140310 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Can't open any files in PSE 11

    What is "NEF is not a valid win32 application when" when I attempt to open a Nikon NEF (raw) file in PSE 11
    Also happens with JPEG.

    Check on the PSE forum http://forums.adobe.com/community/photoshop_elements

  • .NRW files not displaying thumbnails in Bridge

    .NRW RAW files from Nikon P7800 do not display thumbnails or metadata in Bridge. PsCC, Bridge and CR 8.3 are all showing as up to date on CC Desktop App. Files display correctly in Lr 5.3. Any suggestions ?

    I have:
    PhotoshopCC>Edit>Preferences>CameraRaw>8.3.0.141
    BridgeCC>Edit>CameraRawPreferences>8.2.0.94
    The computer found  6 files  named Camera Raw.8bi.  They are in pairs , two in the CS5 folder and two in the CS6 folder, two in the CC folder. One of each pair has >Program Files(x86)> The other one has  >Program Files>.
    When I go to C:\ Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats\ only one (Camera Raw.8bi) file shows. This was created on 18 March 2013 and modified on 3 December 2013.
    If I go to C:\Program Files(x86)\Common Files\Adobe\Plug-Ins\CC\File Formats\ another (Camera Raw.8bi) file appears, created and modified same date and time as the first one.
    Is this making any sense ? Thanks for your help.
    It appears Bridge is using CR 8.2, the question is why and how do I persuade it to preference CR 8.3
    By the way, I failed to mention it previously CR is converting and editing the NRW files normally, I just can't see their thumbnails in Bridge.

  • Can't Open NEF RAW files in PSE 6

    I cannot open NEF RAW files in PSE 6. I downloaded the plugin but that didn't fix it. Any suggestions?

    There is another choice.
    You can download the free Adobe DNG Converter, then convert your RAWs to DNG, and then open them in the PSE6 Adobe Camera Raw editor. This doesn't require you updating your software to PSE9, or purchasing anything.

  • Help opening raw files in PSE 13

    Hello,
    I upgraded PSE 13 from PSE 9. I was using PSE 9 with my Nikon 600 (because I couldn't open the 600 raw files in PSE 9) by using the Adobe DNG converter. This was working fine. Since upgrading I can't open any Nikon 600 raw files in PSE 13 nor can I open the converted DNG files. It only recognizes jpeg files. The "Open in Camera Raw" option in the File drop down menu is also grayed out and can't be selected. I've tried the "updates" option from the Help menu and ran the updates, shut down PSE13 and also shut down computer and it still isn't working.  Wondering if I need to download a new ACR but can't find any that support the Nikon 600. Any help would be appreciated!

    Thank you for your help.
    When I do the "Help" drop down menu there isn't an option for "adobe plug-in" just "about plug-in" which doesn't list any options that seem to help when clicking on and none that say Camera raw.
    I read the manual instructions for downloading and am currently downloading the zip file; it is about 70% done. Will this help?
    This is what I'm referencing:
    These instructions were originally written to install ACR 8.2 for PSE11, but have been updated to install ACR 8.3 with PSE12.  While ACR 8.3 RC would work with PSE11, ACR 8.3 final will not.  Only PSE12 will host ACR 8.3.
    ACR 8.3 will work with PSE12 to open 70D files, but on an older Windows OS like Vista or XP  there is no compatible installer, so a manual install is the only option.  I should also say that the process outlined below does work on my Windows 7 64-bit computer, but I also have PS-CS6 and PS-CC installed on it, so it is possible that ACR 8.3 is dependent on something that wouldn't exist on a computer with only PSE installed on it, but someone else will have to confirm that.
    I was able to get 70D files to open in ACR 8.3 on PSE12 by doing the following:
    Download the ACR 8.3 for Windows update for PS-CC via the direct download link on the Adobe Blog - in the future this link will likely contain links to only newer versions of ACR but the process would be similar:
    http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected
    Unzip this downloaded setup.zip to a folder somewhere.
    Inside the files from that zip is a folder called payloads \ AdobeCameraRaw8.0All-031213015928. 
    (Note that for future versions of PS and ACR the folder name will be different at the end, but the general format shold be similiar, and the important thing is that this is the folder without x64 in the path, because at this point PSE is a 32-bit program so we need the 32-bit version of the plug-in.  At some point in the future, PSExx may be 64-bit and the approporiate file or files could be the 64-bit version for the 64-bit version of PSE.  This zip file is for Photoshop which has both 32-bit and 64-bit versions so there are both versions of the plug-in as well.)
    Inside that folder is another ZIP called Assets1_1.zip so unzip it somewhere.
    Inside Assets1_1.zip there is a file called 1003.  This is the largest or perhaps only file in that zip and is the plug-in you need.
    Copy this 1003 file into the existing PSE12 camera raw plug-in folder:
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 12\File Formats or for a 32-bit Windows OS, into:  C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 12\File Formats
    Rename the existing Camera Raw.8bi to Camera Raw_8bi_80 (in case something doesn't work and you need to rename it back, later).
    Rename 1003 to Camera Raw.8bi
    After these steps you have the ACR 8.3 plug-in installed in PSE12 but not the camera and lens profiles, so install those by downloading and installing the DNG Converter 8.3:
    http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows

  • How do i get rid of grayed out EXPORT IN FILE on PSE 12? I am trying to export a panoramic photo file.

    I am trying to export a panoramic photo file in PSE 12. but EXPORT under file is grayed out, how do i get rid of it being grayed out?

    Hi,
    This is a follow up to the dialog about "exporting" files back to LR5 after adjusting in PSE12.
    In simple terms, as I am no expert at all, just a long time film photo pro always struggling with the digital technology, even though it is great to use, here is what I need to accomplish.
    After transferring raw files from LR5 and creating a panoramic image file in PSE12,  which shows on my editor next to the several files i created it from. Is it possible to send the newly created panorama file back to LR5 so I could use the print module there. If so, how, what steps need be taken.
    Thank you for your help, I am in no rush, and am very appreciative of your imput.
    Carl
    My overall aim it to create the finest quality panoramic print for exhibition.

  • .nrw files will not open in cs5?

    why won't nrw files open in cs5?

    Because your camera is too new for your version of Camera Raw.
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Mylenium

  • Camera raw 7.2 will not install within CS5.5, but need it to read nrw files from P7700.

    camera raw 7.2 will not install within CS5.5, but need it to read nrw files from P7700. Besides DNG Converter, what can I do to use files directly?

    Your next option is to upgrade photoshop. If you can't afford the full version (less than $20/month) you could get elements, it uses the latest version of camera raw, but I think it is a stripped down version though.

  • Why can't I download Canon S100 CR2 RAW files into PSE 10?

    I am using PSE 10 with a Canon S100 camera. I am successful in downloading all of my jpeg files and RAW CR2 files from my older Canon Rebel, but not with the Canon S100 CR2 Raw files.
    When first downloading from the Canon S100 camera into PSE 10 and later doing them manually, I receive the following messages:  Nothing imported...files are not supported file types or alread in catalog.  File damaged or in a format that cannot be included in the Elements Organizer.
    These problems files, by the way, were automatically added to my Window's My Pictures catalog and are perfectly fine.

    Thank you for the info. It worked great, once I was
    able to get around a second problem that prevented updating
    from within the PSE 10 application (error U41M1C212). That
    problem was solved by disabling the MS Virtual WiFi Miniport
    Adapter (located in the Network and Sharing Center control
    panel). It just goes to show me once again, how complex
    computer apps are and how much we all have to rely on each
    other to get anything to work properly (frustratingly
    enough, since the companies we paid good money to for
    their problematic software are not very helpful). Thanks
    again.
                Re: Why can't I download Canon S100 CR2 RAW files into
    PSE 10?
                created by 99jon in Photoshop Elements - View the full discussion
    Try opening a CR2 directly from a folder by right-clicking
    and choosing open with Photoshop Elements editor, if that
    dosent work, update the appliactaion (required for the
    S100V)
    In the Editor menu click Help >> Updates
    Then install amera raw 6.7
                Replies to this
    message go to everyone subscribed to this thread, not directly
    to the person who posted the message. To post a reply, either
    reply to this email or visit the message page:
    http://forums.adobe.com/message/4602882#4602882
                To unsubscribe from
    this thread, please visit the message page at
    http://forums.adobe.com/message/4602882#4602882. In the
    Actions box on the right, click the Stop Email
    Notifications link.
                Start a new discussion
    in Photoshop Elements by email or at Adobe Forums
                For more information
    about maintaining your forum email notifications please go to
    http://forums.adobe.com/message/2936746#2936746.

  • Problems opening raw files in pse 8, using a canon 7D

    Hi I am having trouble opening cr2 files in pse 8 using a canon 7D, it keeps giving me a error msg, "saying it can't read file" it open them fine from my 1000D same format etc. Has anyone got a solution?
    Tahnks R.

    Most likely you need to update your camera raw plugin to version 6.2
    windows:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4807
    mac (6.2 only works in the elements editor and not bridge, 5.7 for bridge)
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4806
    MTSTUNER

Maybe you are looking for