NS500 won't connect to my wireless network. All apple network- including airport.

Tried WPS button and so-called manual setup. After cable is unplugged thing goes ******.
Any ideas?

Hello Colleen,
Refer to the below link to manually setup the Network Speaker.
http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1027505
If you are using Macintosh, follow this link.
Disable the firewall in the Computer.
If there is no sound coming out of the Network speaker, there may be a problem with the network or there may be an incorrect setting. Follow these steps to try to resolve this issue:
   1) Make sure the volume of the speaker is up by pressing the VOLUME + button.
    The sound of the Network speaker may have been set to silence by the controller for your system. If sound is output for a moment and then is silenced again, the speaker may have received a command to silence the sound. Confirm the setting of the controller and then change the setting so that the sound is not deleted.
    2) Check the AUDIO IN indicator on the back of the Network speaker.
    If the AUDIO IN indicator is lit up green, the audio input setting has been selected and is active instead of the home network. Press the AUDIO IN button to switch the input to the Home Network setting. The indicator will go off once the Network speaker is connected to your home network.
Regards,
Colby

Similar Messages

Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?

Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?

I'm not familiar with your router but are there any buttons on the front or back of it because sometimes you need to pair the router in order for your PC, laptop, phone or iPad to connect wirelessly with it?
From the routers I have used there are normally two buttons on the front or back (apart from the power button), pressing one of them allows you a few minutes to enter the required password on your iPad. Best look at the instructions for the router.

Touch won't connect to my wireless network

Sometimes my touch won't connect to my wireless network even though settings show it connected with good signal strength. When I go to the main screen the signal strength icon (upper left) doesn't appear. Any ideas?

Try:
- A reset. Nothing will be lost,
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Powering off and then back on the router.
- Reset Nework settings: Settings>General>Reser>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

ATV2 won't connect to my wireless network.

My ATV2 won't connect to my wireless network, although the network shows up in the list of networks and I'm using the correct password. A laptop approximately 1 foot away connects wirelessly to the network. ATV has worked in the past - haven't tried it recently. Tried reset - didn't help. Any suggestions?

If your wireless router is setup to use WPA or WPA2 security then you need to make sure you match this within your Apple TV device.
You probably already know to match case sensitivity in your password.
We posted Apple TV tips at the bottom of the page located at this link: http://www.allabouthomeelectronics.com/apple-tv-airplay.html

My iBook i just bought from USA won't connect to my wireless

My iBook i just bought from USA won't connect to my wireless that my iMac works on. Please help I'm seriously clueless and its driving me crazy!
I just says error when i type in the key and invalid password when I type in it in network assistant! ):): It comes up as WAP being the only option when I click the network name. but i don't actually know what WAP means....

Go to Hard Drive > Applications > Utilities > System Profiler to tell the MHz rating, how much RAM is installed, and what type of optical drive it has.
To run Repair Permissions, go to Utilities again, and click on Disk Utility. Choose the named hard drive ("Macintosh Hard Drive" unless it's been renamed), and click on "Repair Permissions."
What encryption are you running on your network? Do you have a router? If so, it needs to be set to a mode that will work with the 802.11b standard, since that is what the iBook's original AirPort Card uses.

Mac mini won't connect to printer unless other mac on network turned on

mac mini won't connect to printer unless other mac on network turned on

Copy the IP address of the printer from the Mac that can connect to it by itself. The IP shows when you start any print job.
Disable Printer sharing on this Mac.
Go to the Mac that cannot connect by itself and set up the printer from scratch using the printer's IP. To do this:
System Preferences / Print & Scan, then click the + sign, nxt select Add Printer or Scanner and click on IP. Fill in the info.

Installed iTunes 10.5 but after I restarted my computer it won't connect to the Internet. All other computers in the house connect to Internet just fine. Help!!

Installed iTunes 10.5 but after I restarted my computer it won't connect to the Internet. All other computers in the house connect to Internet just fine. Help!! I Did all the regular modem diagnostics but that computer won't connect and it's a hard wire connection, not wireless (too far from the wireless signal). Is anyone else having this problem?

Hello, might try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
IFor 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connecti

I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connection is fine Safari works and I can access all sites. I have an iPad 2. Any help on this will be greatly appreciate. iPad 2, iOS 8.3

This is an ongoing problem as you will see by searching the forum.
Out of curiosity, do you have 2 step verification enabled? It was recently extended to include iMessage & FaceTime & I'm wondering if it might be causing some of the issues that some users are experiencing.

I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. Where can I download ios 4.3.5 from?

I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. My pc didn't create a backup before updating software so I can't revert back to ios 4.3.5 from there, where can I download ios 4.3.5 from?

I tried just about everything and finally brought my Ipod touch to the apple store. The tech installed ios 4.3.5 but still no WIFI. He recommended a $149 exchange - not really a bad deal with a new battery and 90 day warranty, but I thought I'd try again.
The "solution" was bizarre. On YouTube was a fix involving taking the motherboard out and heating the wifi components with a heat gun.
I did not like that idea, but another involved turning it off, putting it in the freezer for five minutes and restarting. It worked! I must admit the fix does not work reliably, so I may still go for the exchange. Still, I am now convinced that it is a hardware problem. i remember back in the old days, TV repairmen sprayed a suspected bad resistor with Freon. The chilled component would work long enough to identify what needed replacement. Perhaps something similar is happening here.
For anyone wanting to try this, I found it more convenient to place the back of my ipod on a frozen cold pack until the wifi is restored. It seems to happen when condensation forms on the face. I used a towel to wipe off the moisture so as not to add to the problem.

Ipod won't connect to the computer at all.

My 3rd Generation iPod nano won't connect to the computer at all. Therefore it has no battery for me too be able to reset or try to do anything with it.
I've only been advised to make sure that i have the most recent version of iTunes?
Could anyone help please?
Thanks, Hollie.

Try uninstalling the drivers,
Plug in your iPod
Right click on My Computer and click on Manage
that will bring you to the Computer Management
On the left hand side click on device manager
on the right side click on the plus sign next to Universal Serial Bus Controllers
it will show a list, in that list locate iPod or USB mass storage device
right click and select uninstall
Unplug your iPod and plug it back in
Windows should automatically start installing them again
if nothing pops up then right click on Universal Serial Bus Controllers
and choose scan for hardware changes
If that doesn't work
Go back into Computer Management
Click on Disk Management on the right
and on the left it should say your iPod
Right click and go into change drive letter and paths
click on the change button
Change it to something like N or M
Click ok, you will get a message saying "changing the drive letter may cause the program to no longer run are you sure you want to change this drive letter"
click ok
then restart your computer

My HP OfficeJet 6500A Plus printer/scanner/fax/copier won't connect to my wireless network

I tried going through the Wireless Network setup on my HP OfficeJet 6500A Plus machine. The printer recognizes the network and I then type in my network's password but it won't connect to the network. What can I do? I would like to be able to print and scan wirelessly. Help please!

Hello erking,
Sorry to hear that you are having an issue with connecting the printer to your Mac over a wireless connection.
I have done some research and I have found a great document that deals with The Printer Is Not Found During a Wireless Network Installation.
Please feel free to write me back and I will be happy to assist you further with any questions or concerns you may have.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Won't connect to a wireless network that it sees

My iPad (iOS 6.1.3) sees my wireless network extender but won't connect to it. Just started today. Any ideas or remedies? I've tried unlearning the network and relearning. I've also done a reset, etc. nothing works. As I said, it sees the network but when it tries to connect, the little wheels just spin. BTW, it DOES see and connect to the main wireless router network fine.
Thanks for any ideas.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

AirPort Express won't connect to existing wireless network

I just purchased the current gen AirPort Express and it won't connect to my existing wireless network. My current wireless network is on a D-Link DIR-827 and it operates on both the 2.4 and 5.0 GHz bands. My current gen Apple TV is connected to the D-Link wirelessly and it works fine. Basically all I want to do is have a pair of speakers attached to the AIrPort Express and stream music to it via AirPlay from all my devices. When I use the AirPort Utility, I keep getting the error that 'it's setup to join an existing wireless network but it can't find it.' The light flashes amber and I can't connect to it. Right now I've setup a new wireless network for my AirPort Express but ideally I would like to have it join my existing network so all my devices can stream to it without having to connect to it seperately.
Thanks,
Ata

Hi Ata,
...Right now I've setup a new wireless network for my AirPort Express but ideally I would like to have it join my existing network
If you already configured your AirPort to create a separate wireless network, it would be best to reconfigure it to "join" your existing network by starting over with a "hard reset": Press and hold the reset button and keep it depressed, continuously, about five to ten seconds, long enough for it to flash amber. Then, it will glow amber steadily for about a minute while it starts up, then it will flash amber slowly indicating it needs to be configured.
It will then appear in your Mac's Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Be sure to select the option to "join" your existing network, and not create a new one. In that configuration, it will serve as a device for music streaming only, and cannot serve a wireless access point. For that, your router would need to be a genuine Apple AirPort Base Station.

IPhone 5 won't connect to home wireless network

After updating to iOS 7 my iPhone 5 has been unable to connect to the wireless network in my home. It will recognize it, ask me to input password, and then it will say it cannot connect. I have shut the iPhone 5 on/off, turned on/off the wireless, turned on/off the bluetooth, and attempted to install the latest iOS update (but cannot because it won't let me unless I am connected to wifi).
I am having this problem with my MacBook Pro as well.

There is something wrong with your wireless router or network - especially if you have no problem connecting your iPhone and MPB with any other wi-fi network besides your own.
Have you tried resetting your wireless router and network in conjunction with the modem, and/or have you checked the manufacturer's website to see if there is a firmware update available for your wireless router model that has not been installed?
What type of encryption are you using with your wireless network - WEP, or WPA2?

Imac G5 Isight won´t connect automatically to Wireless Network

My Imac G5 Isight won´t connect automatically to my wireless network.
Everytime I turn it on, I have to manually select the network on the networks list.
I checked system preferences, and marked that I wanted to connect automatically, but still no luck.
It used to work just fine.
Any ideas?
I'm using 10.4.5 and a Netgear wgr614v6 router.

Try deleting your network keychains. Worked for me.

NS500 won't connect to my wireless network. All apple network- including airport.

Similar Messages

Maybe you are looking for