NSAPI plug-in for Weblogic 5.1

Has anyone come across any problems with using the weblogic plug-in for Iplanet 4.1 SP9 running on Solaris 8. If so please can you let me know. Thanks

From my testing, there are no problems. Make sure you grab it from the
latest Service Pack.
Regards,
Eric
"faz man" <[email protected]> wrote in message
news:3e5510db$[email protected]..
Has anyone come across any problems with using the weblogic plug-in forIplanet 4.1 SP9 running on Solaris 8. If so please can you let me know.
Thanks

Similar Messages

NSAPI Plug-In For WebLogic 8.1

I am having some problems authenticating in WebLogic 8.1 when passing Novell I-Chain
headers through a IPlanet proxy. Authentication works fine when passing the headers
directly to WebLogic, but it seems as though WebLogic cannot recognize the request
when passed through the NSAPI proxy plug-in. Any suggestions?

Small bug, simple answer:
The NSAPI proxy plugin converts any headers passed to it into lowercase. Make
sure the authenticator is looking for the correct case-sensitive string.

IPlanet Plug in For WebLogic 5.1 SP9

At the client site we are using PeopleSoft 8.3, Weblogic 5.1 SP9 with iPlanet proxy
servers. The client is using 5.1ps6a plugin. The application does not function
with this plug in. The client has another plugin 6.1sp4 with that WL5.1 Sp 9
gives NASAPI plugin errror that follows:
Message from the NSAPI plugin:
No backend server available for connection: timed out after 10 seconds.
Build date/time: Sep 18 2002 16:55:57
Change Number: 208523
My questions, do BEA has 5.1Sp9 plugin?
Why NSAPI plugin errors while using 6.1sp4 plugin?
What else would fix the problem:
Thanks

A first step will be to enable logging for the proxy plugin. You do
this by adding the line Debug=ON in the obj.conf server directive.
Verify your steps in the following doc:
http://www.weblogic.com/docs51/admindocs/nsapi.html
This Debug creates a file /tmp/wlproxy.log. This file will help you
troubleshoot the issue for proxy-plugin for the 5.1 and 6.1 instances.
Post the log file and lets see what happens...
Good luck,
abdul
[email protected]
"Vidya Sagar" <[email protected]> wrote in message news:<3ea42831$[email protected]>...
At the client site we are using PeopleSoft 8.3, Weblogic 5.1 SP9 with iPlanet proxy
servers. The client is using 5.1ps6a plugin. The application does not function
with this plug in. The client has another plugin 6.1sp4 with that WL5.1 Sp 9
gives NASAPI plugin errror that follows:
Message from the NSAPI plugin:
No backend server available for connection: timed out after 10 seconds.
Build date/time: Sep 18 2002 16:55:57
Change Number: 208523
My questions, do BEA has 5.1Sp9 plugin?
Why NSAPI plugin errors while using 6.1sp4 plugin?
What else would fix the problem:
Thanks

Error NO_RESOURCES when using Apache Plug-in for Weblogic

Hi all,
LoadModule weblogic_module modules/mod_wl.so
   OS.....: OEL 6.3 64 bits
   Weblogic Server: 12.1.0.2 (192.168.0.123)
   Apache: Apache/2.2.15 (Unix) (192.168.0.149)
   I am trying to configure the Apache Plug-in to forward the requests to the Weblogic Server. I already did all the configuration, but when i try to access a page, i get the following error in Apache's error.log:
[Wed Dec 03 18:25:42 2014] [error] [client 192.168.0.149] <649114176419322> weblogic: *******Exception type [NO_RESOURCES] (apr_socket_connect call failed with error=13, host=192.168.0.123, port=7006 ) raised at line 1682 of URL.cpp
[Wed Dec 03 18:25:42 2014] [error] [client 192.168.0.149] weblogic: Trying GET /benefits/ at backend host '192.168.0.123/7006; got exception 'NO_RESOURCES: [os error=13, line 1682 of URL.cpp]: apr_socket_connect call failed with error=13, host=192.168.0.123, port=7006 '
[Wed Dec 03 18:25:44 2014] [error] [client 192.168.0.149] <649114176419322> weblogic: request [/benefits/] did NOT process successfully..................
   My httpd.conf if configured as follows:
Listen 8080
LoadModule weblogic_module modules/mod_wl.so
<IfModule mod_weblogic.c>
   WeblogicHost 192.168.0.123
   WeblogicPort 7006
</IfModule>
<Location /benefits>
   SetHandler weblogic-handler
</Location>
When i try to access the app deployed in Weblogic with the following address: "http://192.168.0.149:8080/benefits/" , i get the error mentioned above and the following error is displayed in my browser:
   Failure of Web Server bridge:
   No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.
What am i doing wrong?
Thanks in advance.

Hi all,
I had some progress... i disabled the firewall (SELinux) on the Apache server. Before, i had just disabled the firewall from the Weblogic Server. Now, when i access the apache server, it redirects (sometimes, actually) the request to my Weblogic Cluster. Let's say that 50% of the time it works and the other 50% i get the error informed previously.
   I am using the apache user and the ulimit of this user is:
      [apache@vm-apache conf]$ ulimit -a
core file size          (blocks, -c) 0
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 15915
max locked memory       (kbytes, -l) 64
max memory size         (kbytes, -m) unlimited
open files                      (-n) 1024
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) 8192
cpu time               (seconds, -t) unlimited
max user processes              (-u) 1024
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
   From the Apache server (192.168.0.149), when i execute the "culr" command, i get the following message:
      [apache@vm-apache conf]$ curl http://192.168.0.123:7006/benefits
      <html><head><title>302 Moved Temporarily</title></head>
      <body bgcolor="#FFFFFF">
      <p>This document you requested has moved temporarily.</p>
      <p>It's now at <a href="http://192.168.0.123:7006/benefits/">http://192.168.0.123:7006/benefits/</a>.</p>
      </body></html>
   The message above represents a OK situation or a problematic one?
   Below you can see the last few lines of my Error Log and Access Log:
   ### error log ###
[Thu Dec 18 20:54:16 2014] [error] [client 192.168.0.123] <340514189468553> weblogic: parseJVMID: could not resolve hostname '-1062731653'. Returning NULL from parseJVMID
[Thu Dec 18 20:54:16 2014] [error] [client 192.168.0.123] <340314189468563> weblogic: parseJVMID: could not resolve hostname '-1062731653'. Returning NULL from parseJVMID
[Thu Dec 18 20:54:17 2014] [error] [client 192.168.0.123] File does not exist: /var/www/html/favicon.ico
[Thu Dec 18 20:54:17 2014] [error] [client 192.168.0.123] File does not exist: /var/www/html/favicon.ico
[Thu Dec 18 20:54:21 2014] [error] [client 192.168.0.123] <340114189468603> weblogic: parseJVMID: could not resolve hostname '-1062731653'. Returning NULL from parseJVMID, referer: http://192.168.0.149:8080/benefits/
[Thu Dec 18 20:54:44 2014] [error] [client 192.168.0.149] <339814189468792> weblogic: parseJVMID: could not resolve hostname '-1062731653'. Returning NULL from parseJVMID
[Thu Dec 18 20:54:44 2014] [error] [client 192.168.0.149] <339814189468792> weblogic: initJVMID: parseClusterServerList failure
[Thu Dec 18 20:54:45 2014] [error] [client 192.168.0.123] <339914189468844> weblogic: parseJVMID: could not resolve hostname '-1062731653'. Returning NULL from parseJVMID, referer: http://192.168.0.149:8080/benefits/servlet
[Thu Dec 18 20:54:45 2014] [error] [client 192.168.0.123] <339914189468844> weblogic: initJVMID: parseClusterServerList failure, referer: http://192.168.0.149:8080/benefits/servlet
[Thu Dec 18 20:54:56 2014] [error] [client 192.168.0.149] <339814189468792> weblogic: request [/benefits/welcome.html] did NOT process successfully..................
[Thu Dec 18 20:54:57 2014] [error] [client 192.168.0.123] <339914189468844> weblogic: request [/benefits/welcome.html] did NOT process successfully.................., referer:http://192.168.0.149:8080/benefits/servlet
   ### access log ###
192.168.0.123 - - [18/Dec/2014:20:54:15 -0300] "GET /benefits HTTP/1.1" 302 267 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.123 - - [18/Dec/2014:20:54:16 -0300] "GET /benefits/ HTTP/1.1" 200 5832 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.123 - - [18/Dec/2014:20:54:17 -0300] "GET /favicon.ico HTTP/1.1" 404 290 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.123 - - [18/Dec/2014:20:54:17 -0300] "GET /favicon.ico HTTP/1.1" 404 290 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.123 - - [18/Dec/2014:20:54:20 -0300] "POST /benefits/servlet HTTP/1.1" 200 492 "http://192.168.0.149:8080/benefits/" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.149 - - [18/Dec/2014:20:54:39 -0300] "GET /benefits/welcome.html HTTP/1.1" 503 250 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.123 - - [18/Dec/2014:20:54:44 -0300] "GET /benefits/welcome.html HTTP/1.1" 503 250 "http://192.168.0.149:8080/benefits/servlet" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
Is there any additional or recommended configuration for this solution to work properly?
Thanks again for the attention and pacience.

Apache plug-in for weblogic server under linux

Ladies and gents,
          Having problems getting the plug-in working..............
          System components:
          RedHat linux 6.1
          BEA Weblogic server 5.1
          Apache web server 1.3.19 (WLS supports the plug-in)
          I have enabled DSO support and verified this using
          {APACHEHOME}/bin/httpd -l which lists mod_so.c as one of its
          components
          I have installed and activated the plug-in using apxs
          To verify that the plug-in was installed I did this:
          %grep weblogic {APACHEHOME}/conf/httpd.conf
          which returns
          LoadModule weblogic_module libexec/mod_wl.so
          BUT NOT:
          AddModule mod_weblogic.c
          I have checked {APACHEHOME}/src/modules/standard and that does not
          contain the file. Please could someone mail me the source file
          "mod_weblogic.c" or enlighten me as to why this not happening.
          Many thanks in advance,
          Kevin


Ladies and gents,
          Having problems getting the plug-in working..............
          System components:
          RedHat linux 6.1
          BEA Weblogic server 5.1
          Apache web server 1.3.19 (WLS supports the plug-in)
          I have enabled DSO support and verified this using
          {APACHEHOME}/bin/httpd -l which lists mod_so.c as one of its
          components
          I have installed and activated the plug-in using apxs
          To verify that the plug-in was installed I did this:
          %grep weblogic {APACHEHOME}/conf/httpd.conf
          which returns
          LoadModule weblogic_module libexec/mod_wl.so
          BUT NOT:
          AddModule mod_weblogic.c
          I have checked {APACHEHOME}/src/modules/standard and that does not
          contain the file. Please could someone mail me the source file
          "mod_weblogic.c" or enlighten me as to why this not happening.
          Many thanks in advance,
          Kevin

Configure/installing apache web server (1.3.26) plug in for weblogic server 6.1

hi,
can any body know the exact steps to configure the apache web server which can proxy requests to weblogic server 6.1?
thanks in advance.

hi,
can any body know the exact steps to configure the apache web server which can proxy requests to weblogic server 6.1?
thanks in advance.

VSS plug-in for weblogic workshop

Hi,
does anyone know where I can find such a plug-in?
thanks in advance,
Manuel Leiria

just had a look at the site, and the losers haven't even got an update site yet! if they had, you could download and install it from within eclipse. as it is, you need to download the thing manually, put the zip in the root of your eclipse (where startup.jar is) and unpack it. if they're at all competent, it should place itself in the right place and be there next time you start eclipse. bit poor that there's no update site, though. they're a doddle to set up

Does NSAPI plug-in route the T3 requests to WLS?

Hi,
In our deployment, we use IPlanet witn NSAPI plug-in for web
server and WLS as application server. It works fine for browser
clients.
If we want to add Java Swing application clients, which use T3
to talk to WLS what changes are required for the same
configuration to work? Does the plu-in route the T3 requests to
WLS in the first place? What changes are required if so?
Choudary.

"Choudary" <[email protected]> wrote:
>
Hi,
In our deployment, we use IPlanet witn NSAPI plug-in for web
server and WLS as application server. It works fine for browser
clients.
If we want to add Java Swing application clients, which use T3
to talk to WLS what changes are required for the same
configuration to work? Does the plu-in route the T3 requests to
WLS in the first place? What changes are required if so?
Choudary.
Use HttpTunneling:
1)add "weblogic.httpd.tunnelingenabled=true" to your weblogic.properties
2) set ppath="*/HTTPClnt*/" or add a new mime-type "*.tun" proxy

Apache Proxy Plug-in with WebLogic 8.1 SP5 - Transfer Encoding:Chunked

Hello All,
Configuration: Apache 2.0.48
Plugin - mod_wl128_20.so
WebLogic Version - 8.1 SP5
There is no SSL between Apache and WebLogic server.
Apache seems to have issue when the response from WebLogic has: Hdrs from WLS:[Transfer-Encoding]=[chunked]
I turned on the debugging on Apache side with DebugAll flag and WLS sends data to Apache plug-in.
Is is a known issue? Is there any CR to fix it? Please let me know if you need further details.
Any help is appreciated.
Thanks,
Janani

Hi Vishwas,
Thank you for the reply. I forgot to mention that Apache and WebLogic are on Solaris 9 platform.
Accesing a webapp hosted on WebLogic through Apache->plug-in->WebLogic return 500 internal server error, but other webapps hosted on the same WebLogic domain works properly. Looking at the Response Hdrs from WebLogic shows that WLS returns transfer-encoding=chunked. The other webapps which work properly has content-length set and transfer-encoding is not chunked.
So, the question is does Apache Plug-in for weblogic 8.1 SP5 read the chunked data properly?
Thanks,
Janani

JVisualVM Plug-In with Weblogic 12.1.2

Hi,
I am trying to connect to a Coherence Cluster running on Weblogic 12.1.2 and can't. I am following this doc The Oracle Coherence Incubator -
Using jdk 1.7.0_45 on Windows 8.1.
I can get it running with Coherence Standalone.
I tried to configuring jmx admin at the servers...
-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false
With jmx port... without the different port... without this config.
I start JVisualVM like this
%JAVA_HOME%\bin\jvisualvm.exe --cp:a %WL_HOME%\server\lib\wljmxclient.jar;%WL_HOME%\server\lib\weblogic.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote -J-Dcom.oracle.coherence.jvisualvm.disable.mbean.check=true
A Kodo error appears when start VisualVM. If I change weblogic.jar to weblogic-classes.jar... the error dissapears.
Can you give an example how must be configured the weblogic server? To what server I must connect? The Coherence Data Server? The AdminServer? I tried them all.
service:jmx:iiop://localhost:xxxx/jndi/weblogic.management.mbeanservers.domainruntime
Thank you!!
JP

Hi Vishwas,
Thank you for the reply. I forgot to mention that Apache and WebLogic are on Solaris 9 platform.
Accesing a webapp hosted on WebLogic through Apache->plug-in->WebLogic return 500 internal server error, but other webapps hosted on the same WebLogic domain works properly. Looking at the Response Hdrs from WebLogic shows that WLS returns transfer-encoding=chunked. The other webapps which work properly has content-length set and transfer-encoding is not chunked.
So, the question is does Apache Plug-in for weblogic 8.1 SP5 read the chunked data properly?
Thanks,
Janani

IIS 6 Plug-in with Weblogic 8.1

Hello there,
I am just wondering if there is anyone out there, who got IIS 6 plug-in working
with WebLogic 8.1. Plug-in perfectly works with IIS 5. When we upgraded W2K to
W2003 plug-in didn't work with Weblogic. If there is anyone who knows how to get
this up and running, your help will be appreciated.
Thank you.

Hi Vishwas,
Thank you for the reply. I forgot to mention that Apache and WebLogic are on Solaris 9 platform.
Accesing a webapp hosted on WebLogic through Apache->plug-in->WebLogic return 500 internal server error, but other webapps hosted on the same WebLogic domain works properly. Looking at the Response Hdrs from WebLogic shows that WLS returns transfer-encoding=chunked. The other webapps which work properly has content-length set and transfer-encoding is not chunked.
So, the question is does Apache Plug-in for weblogic 8.1 SP5 read the chunked data properly?
Thanks,
Janani

Developing plug-ins for BEA Weblogic Studio

Can anyone provide pointers on documentation on developing plug-ins for BEA Weblogic Studio (e.g like this one https://beajunitplugin.projects.dev2dev.bea.com/ )
Regards,
-N

film leaders clips can be downloaded online if you dig around a bit ... Peter Wiggins has a nice Motion Template clock he offers for free (which is a bargain by anyones reckoning)
easy enough to create your own film leader style countdown with a few back to back text generators separated by clock wipe transitions
color bars can already found in your fcp video generators bin
color bars and a film leader style countdown can also be auto generated during output (print to video and edit to tape)
distort faces and license plate like they do on tv? ... ok i give up, what do you mean? if you mean you want to disguise them (Mosaic, Blur etc) then you can have a bash with my Region Blur plugin
Message was edited by: Andy Mees

Is there plug-in for JBuilder developing Weblogic web application?

Is there plug-in for JBuilder developing Weblogic web application?
thanks in advance
woodsonli

Firefox 3.03 - why such an old version? 3.6.12 is the most recent release.
It is up to Microsoft to fix Outlook Web Access to work with Firefox or to come up with a plugin for Firefox. If Mozilla was to start fixing or write plugins for all the software out there that is made to work with Internet Explorer and not any other browser, they wouldn't have time to work on Firefox.
There are two Firefox extensions that will open IE in a Firefox tab. Many users install one of these addons to get around problems like you are having with Outlook Web Access.
IE Tab2
https://addons.mozilla.org/en-US/firefox/addon/92382
IE Tab Plus
https://addons.mozilla.org/en-US/firefox/addon/52809/

NSAPI - directing to multiple weblogic instances

Hi,
I am trying to redirect 2 different URLs (www.test.com/server1 and www.test.com/server2)
to distinct weblogic instances which run on ports 7001 and 8001. The NSAPI instructions
say to do the following in the obj.conf file -- see below. This works great if
I open a new browser window for each one. However, the problem occurs in a single
browser instance when switching between the 2 URLs. Both URL requests will only
be directed to one of the WebLogic instances -- the other WL instance is ignored
no matter what URL you enter.
Any ideas????
# Here we configure the NSAPI module to pass requests for
# "/weblogic" to a WebLogic Server listening at port 7001 on
# the host myweblogic.server.com.
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl_proxy WebLogicHost=myweblogic.server.com\
WebLogicPort=7001 PathTrim="/weblogic"
</Object>
# Here we configure the plug-in so that requests that
# match "/servletimages/" is handled by the
# plug-in/WebLogic.
<Object name="si" ppath="*/servletimages/*">
Service fn=wl_proxy WebLogicHost=192.192.1.4 WebLogicPort=7001
</Object>

I am not sure I understand what you want to do.. From your example, what you
are doing is directing anything that has "weblogic" in the URL to a single
weblogic instance. In your case: myweblogic.server.com.
You are also directing anything with "servletimages" in the URL to :
192.192.1.4.
Both these servers are listening on port 7001. There is no mention of 8001.
Let's say you want to have all requests that have "server1" in the URL go to
one weblogic instance and all that have "server2" in the url goto the other
weblogic instance(port 8001), then you need to configure two object tags.
One that has a ppath="*/server1/*" and that will point to weblogic instance
1(port 7001) and another weblogic object that has a ppath="*/server2/*" and
points to weblogic instance 2(port 8001).
Hope this helps.
Regards,
Eric
"Lauren Jones" <[email protected]> wrote in message
news:3b6f04fb$[email protected]..
>
Hi,
I am trying to redirect 2 different URLs (www.test.com/server1 andwww.test.com/server2)
to distinct weblogic instances which run on ports 7001 and 8001. TheNSAPI instructions
say to do the following in the obj.conf file -- see below. This worksgreat if
I open a new browser window for each one. However, the problem occurs ina single
browser instance when switching between the 2 URLs. Both URL requestswill only
be directed to one of the WebLogic instances -- the other WL instance isignored
no matter what URL you enter.
Any ideas????
# Here we configure the NSAPI module to pass requests for
# "/weblogic" to a WebLogic Server listening at port 7001 on
# the host myweblogic.server.com.
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl_proxy WebLogicHost=myweblogic.server.com\
WebLogicPort=7001 PathTrim="/weblogic"
</Object>
# Here we configure the plug-in so that requests that
# match "/servletimages/" is handled by the
# plug-in/WebLogic.
<Object name="si" ppath="*/servletimages/*">
Service fn=wl_proxy WebLogicHost=192.192.1.4 WebLogicPort=7001
</Object>

How to make redirects work with NSAPI plug-in

We have a NSAPI plug-in on a Iplanet server which routes any URL request with "weblogic"
on it to a WebLogic server with a PathTrim. eg. http://ksopsd01/weblogic/myapp/login.jsp.
All my forwards are working fine except any redirection. My redirects fails
as it does not have the "weblogic" in it. Is there anyting like PathPrepend to
get my redirects working? Or do I need to hardcode "weblogic" in all my redirections.
Any help would be very much appreciated.
Thanks

Hello Globalmark
For your problem dealing only with Skype, Skype supports their product with a comprehensive Help system for answers to your Skype-specific questions.
If you cannot find the answer you need from their Knowledgebase, Troubleshooter, User Guides, or dedicated Skype-user forum, you can get technical support directly from Skype.
MSN (now Microsoft) Messenger for Mac cannot use ANY camera unless you are using the "corporate" version. The personal version is a text only app.
This post will give you the options available to you for using your MacBook Pro to contact those whose only chat client application is MSN (now Microsoft) Messenger.
Your posted system info shows that you are still using Mac OS X (10.5.1). If that is correct, you may want to consider the advantages of updating to the latest version of Leopard.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

NSAPI plug-in for Weblogic 5.1

Similar Messages

Maybe you are looking for