Nsldap32v50.dll is part of CR11R2 install but has no file version

Hi, I have a Windows applications that I have CR reports in it. In my setup pacakge I have included the use of CrystalReports11_5_net_2005.msm to install the CR run time libraries for my application.
nsldap32v50.dll is part of crystalreports11_5_net_2005.msm installatino. This and another 2 nsldap dlls are installed onto c:\windows\System32 folder. I would like to know why CR requires to install this and other 2 nsldap dlls.
I'm getting error of nsldap32v50.dll has file version (same with the other 2 ldap files that CR will intall) when I run my applicaiton's setup package through MS Application Verifier V2.5. Is there a fix for this problem? If not, how can I go by to get rid of this error?
Thank you.

The nsldap*.dll files are utilized in Enterprise .NET applications for LDAP authentication to BusinessObjects Enterprise. We only have one set of merge modules for Crystal Reports for .NET and Enterprise .NET applications so this is why these files are installed even though you may not be using LDAP.
nsldap32v50.dll
nsldappr32v50.dll
nsldapssl32v50.dll
The only way I know of to get them out would be to modify the MSM file with Orcas. But that may be a bit risky.

Similar Messages

Xcode installed but no developer file ...

I have Xcode 4.3.2 installed but no developer file in Macintosh HD so I can't access to applications such as iOS Simulator, Quartz etc
How can i fix it ?

Certain 'tools' are now in the main Xcode menu..some are added via prefs and IB has been built-in since XC moved to v4.x
See:
Xcode 4 User Guide ; Xcode Basics Help ; Xcode 4 Transition Guide ; Xcode Release Notes

Unable to include report viewer web part. Error is, assembly has a higher version than referenced assembly

I am making a web part in VS 2010 for SharePoint 2010. The web part uses Report Viewer control. The files I have referenced in my project with "Copy Local = True" option are:
Microsoft.ReportViewer.Common.dll
Microsoft.ReportViewer.WebForms.dll
Both are version 10 files.
When I build the project it works fine. But when I add this web part in a page it shows following error.
Compiler Error Message: CS1705: Assembly 'MySolution, Version=1.0.0.0, Culture=neutral, PublicKeyToken=8acc41a360fa228d' uses 'Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' which has a higher version
than referenced assembly 'Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'
I have already installed both Report Viewer 10 redistribute able and its SP1 but no luck. Also copied these DLLs to my SharePoint site bin folder. Did iisreset many times. .Net framework is 3.5 and OS is Windows Server 2008 R2.
How to fix this issue?

Fixed it by updating my web.config which was referencing version 9 instead of 10.

Clean Install but no Library Files

What I meant by this is I would like to do a clean install of an operating system (possibly Mavericks) to a new external drive, then using Migration Assistant or some other means to bring over my User folder minus the Library which I assume contains corrupted files accumulated over the last 15 years. I would then reinstall 3rd party applications and those from Apple that are not installed with the OS.
After testing the result, I would then erase my internal hard drive and clone the external drive to the internal drive. Does this sound reasonable?
I currently have 2 backups, a Time Machine and a clone, one of which would be used for the migration.

Hi, thanks for the response.
baltwo wrote:
IMO, bad assumption. If you're having issues with your current installation, fix them before upgrading.
Easier said than done. I have had intermittent problems with the Finder and other Apple apps (Safari, etc) that I have not been able to resolve. For example, when using the Search box at the top of a Finder window, after entering several characters, the Finder freezes requiring me to relaunch the Finder. Trashing the Finder Preferences didn’t solve the problem. Viewing the Console Log for the exact time that the Finder freezes results in no clues as to the cause. With respect to Safari, the Minimize keyboard shortcut quit working. Trashing the Safari Preference file didn’t help. Numerous other nuisances that I can’t recall at the moment.

Elements 11 installed but no.exe file?

Using the Adobe Download assistant I downloaded and installed a Purchased version of Elements 11 onto Win XP with the Virus program inhibited.
The Adobe Photoshop Elements 11 Icon appeared on the desktop and the Program is listed in Programs and " Add or Remove".
When I click on the icon I get a "Windows is searching for Elements 11 .exe file."
Checked Program Files>Adobe >Elements 11 - cannot see it. I did instal Premier Elements before this.
Should I delete Both Elements and Premier Elements and restart.?
This is my second attempt today first time the registary cleaner made the whole program disappear !

First always make a back up of your registry prior to using any type of registry cleaner. This will allow you to restore the registry from any damage that it may have caused.
Is Premiere Elements currently able to launch? If so then yes please try removing Photoshop Elements from Add/Remove Programs and then try installing again.

Lion just installed but now Parallels file lost?

Please could anyone give advice re Parallels drive being lost after installing Lion? I have therefore downloaded Parallels 7 as I was using version 5 prior to the Lion. Totally confused.....!

Do you have an Intel iMac? You've posted this in the PPC section.
Lion would not delete any files although it might quarantine incompatible applications. Perhaps you should do some Spotlight searching of your drive. You will need Parallels 7 with Lion. The version you have been using is not compatible.

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

TS1440 Following these suggestions, I startup from the Install Disk holding down C. The installation process proceeds as far as "Checking disks..." (part of Select Destination) but hangs up there: the barbershop pole just spins and spins... What do I do n

Following these suggestions, I startup from the Install Disk holding down C. The installation process proceeds as far as "Checking disks..." (part of Select Destination) but hangs up there: the barbershop pole just spins and spins... What do I do next? This is on an old iBook BTW, 2001 G3, OS X, 10.1.2.

Likely, but can you try to erase it/format it?
   3. Click the Erase tab.
   4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
   5. Select your Mac OS X volume.
   6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to get a good install.
Needs to be Apple Partition Map (APM) partition scheme.

ITunes will not open, get error message 7(windows error 126) this application has failed to start because d3d9.dll was not found. re-installing the application may fix this problem. well i did and did not fix anything.

this application has failed to start because d3d8thk.dll could not be found. I looked that file up and it seems its part of directx. i installed directx again but that still did not help.

d3d8thk.dll
That one is a DirectX 8 module and might not be included in the most recent DirectX 9 redistributable available from Microsoft. If it's been installed as part of a partial DirectX 8 install (as part of a game for example), that can cause the issue. Can you track down a full DirectX 8 redistributable? If so, if you install that, does that clear up the iTunes error?

My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
Thanks

Try a different cable. And are you connecting directly to your computer or through a USB hub?

Flash Player 10 installed but not woking

I have spent hours and hours trying to solve this issue on my own from all the adobe forums and forums on other websites about this issue. Still can't get FP to work and I need it working ASAP for my on-line college classes. Getting very desperate and would be incredibly grateful for a solution if anyone can help.
Note: Just before writing this I uninstalled FP active X via control panel and rebooted. The files are still in macromed as listed here, but I have uninstalled FP for a(NOTHER) fresh start.
Here's are the notes I have so far after seeing/trying help on other posts...
Flash player was working now every time I need to use FP it tells me to install but it is already installed.
Program does not show under Start, All Programs but it does show in the Control Panel uninstall list.
I don’t remember exactly when FP stopped working, but I’m not sure I’ve been doing much recently that would have required it, so may be longer than I think. Probably relatively recently though.
I have searched and searched for answers in the forums so I’ve tried several things people suggested, still not working.
Wondering if the problem is this….the ActiveX control is not showing in Manage Add-ons even though I clicked to install it when installing FP.
SYSTEM INFO:
Vista 32 bit
IE 8
Foxfire 3.6.8
Shockwave Player ver. 11.5
Norton 360 ver. 4.2.0
Google toolbar ver. 4.0 w/pop-up blocker enabled
I am the Administrator and only user on my laptop
What I’ve tried so far:
Adobe website shows FP video that it was successfully installed right after, but I just tested again and the Adobe site says to view content I JavaScript enabled and need FP installed. FP is installed however, and still not working.
Tested Shockwave Player through Adobe site and it says it’s installed and working
Checked to ensure Shockwave Flash Object & Java were enabled in IE tools, managae add-ons
Checked that no older versions of Java were installed
IE Security Level to medium
Uninstalled Adobe Flash Player, rebooted, reinstalled, rebooted (a few times)
Uninstalled, rebooted, installed through cnet’s downloads
Checked for updates for IE, Foxfire, Flash Player, Adobe Reader, & Java
Files listed under acromed folder:
            Flash10i.ocx
            FlashInstall (text doc)
            FlashUtil10i_ActiveX.dll
            FlashUtil10i_ActiveX
            Install (text doc)
Ok, think that's all I have at the moment. Please oh please, someone help me before I throw myself out the window!

Thank you so much for your time! Okay, I think I have what you need, if I understood it all correctly. Here goes...
I just installed FP again, did not get the video showing on Adobe site that it was successful even though the download said it was.
Uninstalled using Adobe uninstaller, then tried install once more with the same result.
The macromed Flash folder still has the same files as listed before:
Flash10i.ocx
FlashInstall (text doc)
FlashUtil10i_ActiveX.dll
FlashUtil10i_ActiveX
install (text doc)
In Control Panel I see:
Adobe Download Manager
Adobe Flash Player 10 ActiveX
Adobe Reader 9.3.4
Adobe Shockwave Player 11/5
Showing & enabled in IE Add-ons:
get_atlcom Class
Shockwave Flash Object
Adobe PDF Link Helper
Adobe PDF Reader
The Active X Control for Flash Player is not listed in IE
Don’t see any relevant add-ons in Firefox. BTW, I don’t usually use FF and only downloaded it again because I’d read that FP was working for some people in FF when it wasn’t in IE. So, if we don’t get FF working with FP I’m good with that.
No NPSWF files in the Flash folder for me to right click.
Can't give you any version numbers.
Did I miss anything?

Flash 10.2.159 installed but doesn't play

Doing my best to provide question and system info:
Finally got Flash Player 10.2.159.1 to install. I can see the rotating logo on your "about" page. However, cannot get video to play on other sites, including AOL, where it worked before.
I am running:
HP laptop on unsecured network. 64-bit machine. 32bit IE9 version 9.0.8112.16421 which was installed two days ago (4/20) and started the problem. Have deliberately invoked IE9 from start menu to insure using 32bit version.
I have uninstalled Flash, reinstalled, rebooted, etc. multiple times. Have tried both Manager and manual install. Last was via Manager.
I have no "kill bit" entry in the registry (did not delete, it wasn't there).
I have no install error log.
Files in windows/syswow64/macromed/Flash/
    Flash10p.ocx
    FlashInstall.txt
    FlashUtil10p_ActiveX.dll
    FlashUtil10p_ActiveX.exe
IE9 Manage Addons shows Adobe Shockwave Flash Object enabled, but with blank load time.
I run Norton Utilities (v 14.5.0.120) and Norton Internet Security (v 18.5.0.125). I have had no virus/malware/etc. errors since buying machine.
   Cannot find any means in these packages to check on pop-up blockers. But don't see any notices of any, either. Registry analysis under Utilities shows no errors
I turned off the hardware accelerator.
I admit to being a mainframe programmer with little knowledge of PCs but have read other posts and tried to follow instructions. So, not knowledgable but may be capable.
Wouldn't have your job for all the tea in China, but will appreciate any help or suggestions. Currently unemployed and would really rather avoid $40 fee.

Oh for crying out loud.
This appears to have solved the problem. AOL videos and others now work. Thank you.
Maybe this could be added to the instructions on installation/troubleshooting? Seems much simpler than checking kill bits in the registry.

Picasa installed but doesn't open [Solved]

Picasa is installed but doesn't open. Icon is on toolbar. What else is needed ?
Last edited by vinoman2 (2009-09-01 02:10:38)

skottish wrote:
vinoman2 wrote:
Mr.Elendig wrote:try running it from a terminal, and see what it complains about?
[davek@arch64 ~]$ picasa
/usr/bin/picasa: line 107: /opt/picasa/bin/repackage32.sh: No such file or directory
[davek@arch64 ~]$
You're getting "No such file or directory" errors because you're running a precompiled 32 bit binary on a 64 bit machine without having all the required 32 bit libraries. Try and install every lib32 counter part to the dependencies listed on the AUR page.
I thought it was because of being 64 bit.
I was looking for that dependencies list... where is it?

HP Solution Centre reports unable to start as printer not installed; but I can print!!!

My Officejet Pro 8500 A909g suddenly stopped working. It was connected to my HP Pavillion dv9700 by wireless and has been for the last 6 months or so. My laptop is running on Windows 7 Ultimate 32bit. I have made no software or hardware changes since I last used the printer; just a few hours ago.
I can now print again (having run through all the steps listed below), but can no longer use the HP Solution Centre to run any tasks as it reports that it 'cannot run because the device installation is not complete'
In order to get back to printing, I did all the usual of shutting everything down...computer, router and printer...all to no avail.
Then I downloaded the latest printer software from the HP site (OJP8500V909_Full_14.exe) and first ran the uninstall section of that software; removing ALL of the HP software from my machine.
I used CCleaner to remove all traces including those from the registry as well.
I uninstalled and re-installed the software.... 3 times. (at least it gave me a chance to catch up on reading a good Terry Pratchett book)
Each time I varied the conditions relating to my antivirus... Kaspersky. First by leaving the AV running; then by switching off the AV and switching on the Windows firewall; and then finally by switching off both the AV and the Windows Firewall.
On each occasion, during the installation, the software 'finds' my printer on the network; reports that it is installing, but when it gets to the end of the installation and moves on to the part where it reads 'configuring the printer', it gets stuck and after waiting for some time with the green progress light moving from side to side, nothing further happens.
I have downloaded and run various 'help' bits from the HP site ; HPHNDU.EXE and HPPDU.EXE and printed the test pages from them as well as printing from Word and Adobe pdf; so there is now no problem in printing.
Now, when I run the installation software again without uninstalling, depsite inputting the IP Address of the printer, I still get the error message that no printer could be found on the network?????
What have I missed here??
Thank you

One very important place to remove the other software is in the "server properties" in your printer folder. You need to click on your printer icon in the printers folder> then look for "server properties" , click it> go to drivers> remove all instances of your first printer you originally uninstalled. For some reason the drivers get hung in this and have to be removed in order for you to configure your device- Let me know of any questions
Although I work for HP, I am speaking for myself and not for HP.
Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )

I would like to play an audio cd on my macbook pro. on either the mac or MS parallel window as I have that installed but can't

I would like to play an audio cd on my macbook pro. on either the mac or MS parallel window as I have that installed but can't

iTunes is part of OS X, which implies that iTunes was deleted, or that your OS X installation is corrupt. In either case, the easiest approach usually involves downloading the combo update for OS X — the so-called combo update, and not the delta update — and installing that.
Applying or re-applying the OS X combo update won't alter your user files, but will reload all recent OS X changes, and should also cause iTunes to be re-loaded.
If you are running Mavericks 10.9, then download and install the OS X Mavericks 10.9.5 combo update.
You'll want to have a backup of your system — updates don't fail often, but they can fail. If you don't have Time Machine or some other form of backups running, get that going first; before further changes here.

Nsldap32v50.dll is part of CR11R2 install but has no file version

Similar Messages

Maybe you are looking for